Astro dome accessories

PULSAR DOMES ACCESSORY BAY 2.2 METRE

Adding one or more accessory bays will provide you with additional storage for your computer, books, etc. It is advisable to purchase these bays at the time of purchasing your observatory. This will save the extra delivery charge at a later date. The accessory bay comes with fixing kit and full installation instructions. DIMENSIONS: 1050mm high x 680mm wide x 500mm deep.SCOPE OF DELIVERYBay (1 piece)

€499.00* €649.00* (23.11% saved)

Details

PULSAR DOME REMOTE SHUTTER DRIVE

Motorize your dome shutter - with Bluetooth connection to the rotational drive, and is a vital step towards complete full remote operation of your observatory. Designed to use with PULSAR 2.7 metre dome or 2.2 metre dome. The PULSAR shutter drive is powererd by a pre-installed lithium battery. The battery is recharged by the supplied new PULSAR Induction Charger or by using a power tank battery charger. The charging and battery details are readily accessible through the rotation drive control box so you can monitor the status of your shutter battery. The shutter drive is permanently powered on and the shutter can be opened or closed using a single red button on the drive housing.Alternatively the shutter can ve opened or closed using the software, by Bluetooth connection with the PULSAR rotation drive.NOTE: Windows 11 requires FTDI drivers to be manually installed to allow the Pulsar App to connect to the dome. Programs using ASCOM (N.I.N.A, SGPro etc..) use virtual COMM ports so are unaffected. FTDI drivers can be downloadd via the link in our software and drivers page: https://www.pulsarastro.com/drawings-and-guides-24-w.aspSCOPE OF DELIVERYShutter controllerMotor driveConnecting cablesLithium BatteryInduction chargerHardware kit

€2,190.00*

PULSAR DOMES MULTI PIER ADAPTOR PLATE

The Pulsar multi pier adapter plate is a universal solution for mounting your equatorial mount on the PULSAR telescope pier (part.No.4900660). This adapter plate has different contours on the top and bottom which are suitable for most commercially available telescope mounts. Depending on the type of mount, it can be easily reversed and the pier is ready for use with another mount. You stay flexible and don't have to work with different adapters when upgrading or changing your telescope mount. The adapter plates we offer are made of solid aluminium material and use, among other openings, the standard hole circle diameter of 130mm with 6pcs through holes of 8.0mm and countersinks for M8 cylinder head screws with hexagon socket. The outer diameter of the adapter plate is 163mm and the overall height is 50mm. This adapter plate is suitable for the following telescope mounts: BRESSER/EXPLORE SCIENTIFIC: EXOS-II and EXOS-II Goto, MON-2, EXOS-II PMC-Eight VIXEN: GP, GPDX , etc. SKYWATCHER: EQ3-2Pro, EQ5Pro, HEQ5Pro, AzEQ5GT, NEQ6, AzEQ6GT, EQ6R Pro CELESTRON: CG-5, AVX, CGem, CGem, CGemDX, CGX, CGX-L, CGE, CGE Pro Adapter plates for many other mountings on request and available at short notice. Ask us by e-mail at info@bresser.de or give us a call.

€219.00*

PULSAR DOMES Pier Fixing Kit

The Pier Fixing Kit contains the essential items needed to install all Pulsar anti-vibration piers onto a concrete foundation. FEATURES Essential items needed to install all Pulsar anti-vibration piers Suitable for installing piers onto a concrete foundation SCOPE OF DELIVERY 4 x steel studs with plain nuts and washers

€35.00*

PULSAR DOMES GEN II SECURITY CLAMP KIT HEAVY DUTY (4pcs)

Pulsars new Heavy Duty security clamps are ideal for automated and remote observatory domes. Made from high quality stainless steel, they remain permanently engaged whilst still allowing free rotation of the dome top. In extreme weather conditions, the dome can be additionally screwed down and secured with the optionally available M8x20 wing screws. We advise the use of these clamps for not only remote use, but also public observatories and schools. They can easily be fitted to exisiting pulsar domes too ! Our HD clamps are supplied in 4pcs.

€165.00*

PULSAR DOMES REMOTE ROTATION DRIVE

The PULSAR Dome Drive is the latest development in automating your observatory. Designed for use with the Pulsar 2.7 metre dome or 2.2 metre dome, you can control your observatory from the LCD display panel or from the supplied software on your PC. The Pulsar Dome Drive system is supplied completely assembled, ready to install, using just 4 bolts. The maximum rotation speed is approx. 2.5 degrees per minute.NOTE: Windows 11 requires FTDI drivers to be manually installed to allow the Pulsar App to connect to the dome. Programs using ASCOM (N.I.N.A, SGPro etc..) use virtual COMM ports so are unaffected. FTDI drivers can be downloadd via the link in our software and drivers page: https://www.pulsarastro.com/drawings-and-guides-24-w.aspThe LCD display panel will control the following functions:Move left and rightStopAngle displayGo to angleTracking speed displayChange sidereal speedOpen and close shutter (if shutter drive connected)HomeParkChange brightnessBattery level and charging status of shutter (if shutter drive connected)The supplied PULSAR Observatories Software package allows full control of the observatory from a computer, and includes an ASCOM driver for use with third party software, i.e. Maxim DL, to allow full synchronisation with your telescope. The Pulsar software will control the following functions:Move left and rightStopAngle displayGo to angleSidereal speed displayChange home angleChange park angleShutter statusSCOPE OF DELIVERYDome controllerEncoder unitPower supplyHardware (fixing kit, etc)Software (WINDOWS)

€2,198.00*

PULSAR DOMES STEEL PIER

Research grade telescopes housed permanently in one of our observatory domes should ideally be installed on an anti-vibration design pier. Years of experience in researching, designing and installing piers has led to this superb range of Pulsar piers manufactured from heavy steel. It can be adapted for most commercially available mounts. The pier can be bolted directly to a suitable concrete floor or founding block. Manufactured from heavy steel, the Pulsar Pier has a black powder coat finish.AVAILABLE FROM STOCK IN GERMANY OR FOR CUSTOMIZED PRODUCTS THE DELIVERY TIME IS: 6-8 WEEKS APPROX.FEATURESHeight - 1050mm Base plate diameter - 450mm. Heavy steel structureAnti-vibration designPowder-coatedIMPORTANT NOTE: Purchase also the correct adaptor plate for your mount when placing your pier order. A pier fitting kit is available separately.

€999.00*

Details

PULSAR DOMES SECURITY CLAMP KIT HEAVY DUTY (2)

Pulsars new Heavy Duty security clamps are ideal for automated and remote observatory domes. Made from high quality stainless steel, they remain permanently engaged whilst still allowing free rotation of the dome top. We advise the use of these clamps for not only remote use, but also public observatories and schools. They can easily be fitted to exisiting pulsar domes too ! Our HD clamps are supplied in pairs.

€165.00*

PULSAR DOMES Pulley Kit

The PULSAR Pulley Accessory Kit is designed to aid the opening and closing of the dome shutter, and to minimise the risk of the shutter slipping and causing damage. Allows the shutter to be part opened to any position if required. Easy to fit, the kit comes complete with pulley wheel, nuts, bolts and washers, together with 4 metres of Nylon rope. It can be fitted whilst your dome is being installed or retro-fitted afterwards. The pulley fits to the flange at the top of your dome aperture, through the existing bolt hole, and the Nylon cord fits to the front and rear of the sliding shutter. Supplied with detailed fitting instructionsIMPORTANT NOTE: This set is already included in the current PULSAR domes and does not have to be ordered separately. Older Pulsar domes can be retrofitted at any time. FEATURES Makes opening and closing the dome shutter easier Minimises the risk of the shutter slipping and causing damage Allows the shutter to be part opened to any position SCOPE OF DELIVERY 1x PULSAR Pulley Kit

€69.00*

Eine eigene Sternwarte das ist der Traum der meisten Hobby Astronomen. Nicht mehr das ganze Equipment transportieren zu müssen, nicht mehr einnorden und justieren sondern einfach die Kuppel öffnen und loslegen. Dieser Traum braucht nicht länger ein Traum zu bleiben, denn Bresser hat die PULSAR Kuppeln im Angebot.

Das Programm beinhaltet hohe Sternwarten mit Unterbau oder flache Sternwarten für z.B. das Garagendach. Abgerundet wird das Programm durch umfangreiches Zubehör, wie z. B. Teleskopsäulen mit den passenden Montierungsadaptern oder Motorantriebe um die Sternwarte remote zu steuern. Wir beraten Sie gerne persönlich bei der Planung und Entwicklung – rufen Sie uns an oder schreiben eine E-Mail.