Embark on a voyage of discovery through our solar system and beyond using the BRESSER Spica-II reflector telescope. You can start straight away with your new hobby, because this complete astronomy set already comes with everything you need for exciting observations: an astronomical reflector telescope with 130 mm aperture and 1000 mm focal length, an equatorial mount, a tripod and extensive accessories. Perfect for the astro-novice: the system is very easy to use. So look forward to fascinating sights especially of the Moon, the planets and the Sun.
Perfect combination of mirror and lens – the telescope
Using the Spica-II you’ll start your celestial exploration tour with a classic reflecting telescope of the "Newton" type with an additional lens inside the focuser. This combination of mirror and lens is called "catadioptric". It’s immediately noticeable with this type of telescope that you do not look in at the back, but at the front and laterally. What is the advantage? Even if the telescope is pointed vertically into the sky, you can observe the beauties of the night sky in a comfortable posture. In addition, catadioptric telescopes impress with their transportability, because despite the long focal length, the tube is comparatively short.
With its 130 mm aperture, the Spica-II already collects a lot of light from celestial objects. In addition, 130 mm aperture and 1000 mm focal length result in a focal ratio (ratio of aperture to focal length) of 1 to 7.7 (F/7.7). This means you can enjoy an image with good contrast even at high magnifications. Thus, the telescope is well suited for observing the planets and details on the Moon. Even some deep sky objects are worth looking at through this entry-level telescope: admire open star clusters and globular clusters as well as bright so-called planetary nebulae such as the Ring Nebula M57 in the constellation Lyra.
And how big will the nocturnal highlights appear? The 130 mm aperture achieves a resolution that allows magnifications of up to about 260x with sharp images. Technically, even more is possible – theoretically up to 750x with the included accessories. However, as the magnification increases, the sharpness of the image may slowly decrease. In addition, as is so often the case in astronomy, you are also dependent on the prevailing conditions. For example, the air turbulence in the atmosphere (seeing conditions) always plays a role in your magnification possibilities.
Note for nature lovers:
If you choose a Newtonian telescope like the Spica-II reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes.
A good foundation for your astro-start – mount and tripod
If you want to look up at the sky, you need a solid base on the ground. That's why you will find a robust height-adjustable aluminium tripod and an equatorial mount in your telescope set. The special advantage of this type of mount: unlike an azimuthal model, the movement of the celestial bodies is compensated for only on one axis instead of two. For this purpose, one axis of the equatorial mount is aligned parallel to the Earth's axis in the course of the so-called "alignment". This is easily done by pointing it approximately at Polaris. Perfect for convenient adjustment and tracking of the entry-level telescope: the axes can be moved precisely via the two flexible shafts with fine adjustment. And if you simply place smartphone adapter, eyepieces etc. on the convenient storage plate between the tripod legs, you will have the equipment you need quickly at hand.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable!
Everything for the astro-beginner – the accessoriesFor your start into the wonderful world of astronomy, the Spica-II beginner's telescope comes with lots of accessories. The LED viewfinder, for example, is great for orientation in the night sky. You simply install the direction finder parallel to the actual telescope. It projects a red dot onto a small ground-glass screen that appears to float in front of the sky when you look through it. In this way, it shows you where the telescope is pointing. A great help for the exact alignment of the telescope and the easy location of celestial objects before you gaze at them with higher magnifications.
You determine how detailed you observe your discoveries by using one of the two eyepieces, each of which provides a different magnification. They are fitted with standard 1.25-inch (31.7 mm) diameter sockets which allow them to be easily inserted into the eyepiece focuser of the entry-level telescope. Would you like to look even closer? Then grab the 3x barlow lens, which triples the magnification of the eyepieces in no time.
Explore the astronomical highlight of the daytime sky: With the safe solar filter you can examine sunspots as well as granulation on the Sun.
CAUTION: Never point the telescope at the Sun without the solar filter!
There is also a suitable accessory for your first steps in astrophotography: with the smartphone adapter, you can use your mobile phone as a camera on the telescope. First snapshots of the Moon or Sun made easy!
FEATURES
Reflector telescope with 130 mm aperture and 1000 mm focal length
Reflector type catadioptric
Well suited for observing the Sun, Moon and planets
Height-adjustable tripod with equatorial EQ3 mount
Precise adjustment through flexible shafts and fine adjustment in both axes
Easy to use, very good for beginners
Focal ratio F/7.7, therefore good for observing the planets and details on the Moon
1.25-inch focuser (31.7 mm)
Two eyepieces and one barlow lens with 1.25-inch (31.7 mm) sockets for different magnifications
Safe solar observation with the included solar filter
First steps in astrophotography with smartphone camera adapter
SCOPE OF DELIVERY
Telescope
Aluminium tripod
Equatorial EQ3 mount
Eyepieces: 4 mm and 20 mm (1.25-inch sockets)
Barlow lens 3x (1.25-inch socket)
LED illuminated viewfinder
Solar filter
Smartphone camera adapter
Accessory tray
Astronomy software as download
Instruction manual
Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed. FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone
Save pictures and videos from your microscope or telescope directly in Full HD resolution on your PC. The BRESSER MikrOkular Full HD is an eyepiece camera that can be used directly instead of the eyepiece of your telescope or microscope. Adapters for various devices (all common eyepiece dimensions from different manufacturers) and multilingual recording software for Windows are already included in the scope of delivery. With this camera you can document your microscope or telescope observation or share it with others. Ideal for hobby, school, study and work. The camera can take pictures of the moon and the bright planets on the telescope. In microscopy, the camera is mainly used for shooting in brightfield and incident light.
FEATURESmetal housing, mini USB socketresolution 1920 x 1080 Pixel, Full HDPixel size: 3x3 µm, sensor size: 5.86 x 3.28 mm23,2mm barrel, integrated UV/IR blocking filter30mm; 30,5mm adapter for various microscopes and telescopes included31,7mm (1,25") adapter for telescopes includes with thread for 1,25" filtersmultilingual recording software for Windowsimage format jpg, bmp, tif, pngvideo format avi
SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUinternet connection for software downloadUSB 2.0
SCOPE OF DELIVERYcamera module incl. dust capUSB-cableCamLabLite-Software as a download link, language versions German, English, French, Turkish, Russian, Polish, Indonesian, ChineseUsers Guide included in the software (German, English)Adapters 30mm, 30,5mm, 31,7mm (1,25”)
Explore hidden worlds through your own eyes – with the BRESSER Pollux-I telescope starter set for budding amateur astronomers, you can go on your own journey of discovery in outer space. Everything you need is already included: the astronomical reflector telescope with 150 mm aperture and 750 mm focal length, the equatorial mount, the tripod and a wide range of accessories for astronomical observations. Perfect for getting started quickly: the system is very easy to use. In addition, the entry-level telescope impresses with its versatility: you can observe the Moon and planets as well as star clusters, gas nebulae and even galaxies through the high-quality optics. Due to the parabolic primary mirror the image delights with impressive sharpness and high contrast. In addition, the 2-inch focuser allows for the use of high-quality eyepieces. Perfect conditions for fascinating sights of the night sky!
Time-proven optics for your first astro-steps – the telescope
By choosing the Pollux-I, you’ll start your journey to the stars with a classic Newtonian reflector telescope. Beginners are often surprised by the fact that with telescopes of this type you don't look in at the back of the tube, but at the front and laterally. This gives you the advantage of always being able to look into the telescope in a comfortable posture, even when it's pointed vertically upwards at the sky. In addition, these reflector telescopes offer optics that are absolutely free of chromatic aberrations and thus provide good imaging properties.
The large aperture of 150 mm collects a lot of light from the celestial objects. In addition, 150 mm aperture and 750 mm focal length result in a short focal ratio (ratio of aperture to focal length) of 1 to 5 (F/5). On the one hand, this makes the telescope fast and provide a bright image. On the other hand, high magnifications can be achieved. This combination makes the entry-level telescope so versatile. In addition, the Pollux-I is equipped with a parabolic primary mirror. The remarkable effect of this special mirror shape: you enjoy excellent imaging properties at all magnification levels.
So you can look forward to the complete range of celestial highlights. At low to medium magnification, you can admire deep-sky objects such as open star clusters, globular clusters, gas nebulae and even galaxies such as the pair of galaxies M65 and M66 in the constellation Leo. And at high magnifications, observing the planets or details on the Moon is an absolute pleasure.
You can get really close to your favourite objects: The aperture of 150 mm achieves a resolving power that allows magnifications of up to about 300x with sharp images. Technically, even higher magnifications are possible, theoretically up to 562.5x using the included accessories. However, with increasing magnification, the sharpness of the image can slowly decrease. In addition, the prevailing conditions always make a difference: How highly you can magnify always depends not only on the power of the telescope but also on the air turbulence in the atmosphere (seeing conditions).
The telescope also impresses with its flexibility in terms of eyepiece compatibility: it comes with a 2-inch focuser (focuser extension) and an adapter from 2 inch to 1.25 inch. This enables you to use eyepieces with 1.25-inch sockets (about 31.7 mm) as well as eyepieces with the larger 2-inch sockets (about 50.8 mm) with large fields of view.
Note for nature lovers:
If you choose a Newtonian telescope like the Pollux-I reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes.
Perfect foundation for fascinating discoveries – mount and tripod
Your beginner's telescope is securely held by the height-adjustable aluminium tripod with equatorial mount. The special feature of this mount, also known as a parallactic mount: in contrast to azimuthal models, the movement of the celestial bodies is only compensated for on one axis instead of two. For this purpose, you simply align one axis parallel to the Earth's axis by pointing it approximately at Polaris.
For precise and comfortable alignment and tracking of the entry-level telescope, the Pollux-I comes equipped with two flexible shafts with fine adjustment. And to ensure that the interchangeable eyepieces, barlow lens etc. always remain within reach, they can be stored on the tray between the tripod legs.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable!
Well equipped for the ideal start – the accessories
Your entry-level telescope comes with a wide range of astronomy accessories so that you can start to be amazed right away. For example, the LED viewfinder helps you align the telescope and find celestial objects. Installed in parallel on the telescope, this direction finder shows you a red dot when you look through it. It appears to hover in front of the sky and thereby shows you where the telescope is pointing.
Varying view of the sky: With the two eyepieces with 1.25-inch sockets (31.7 mm), you can admire your astronomical discoveries at different magnifications. The 3x barlow lens already included in the set triples the magnification of the eyepiece you are using.
Enjoy safe observations of our Sun with the included solar filter. This way you can easily take a closer look at sunspots and granulation on our own star.
CAUTION: Never point the telescope at the Sun without the solar filter!
Astrophotography for beginners: with the smartphone adapter, you can use your mobile phone as a camera on the telescope. This way you will quickly impress friends and relatives with your own first snapshots e. g. of the Moon or the Sun.
FEATURES
Reflector telescope with 150 mm aperture and 750 mm focal length
Reflector type Newton with parabolic primary mirror
Very well suited for observing the Sun, Moon and planets as well as star clusters, gas nebulae and galaxies
Height-adjustable tripod with equatorial EQ3 mount
Precise movement through flexible shafts and fine adjustment in both axes
Easy to use, very good for beginners
Focal ratio F/5, thus very suitable for many celestial objects
2-inch (50.8 mm) focuser with adapter to 1.25-inch (31.7 mm)
Two eyepieces and one barlow lens with 1.25-inch (31.7 mm) sockets for different magnifications
Safe solar observation with the included solar filter
First steps in astrophotography with smartphone camera adapter
SCOPE OF DELIVERY
Telescope
Aluminium tripod
Equatorial EQ3 mount
Adapter from 2 inch to 1.25 inch
Eyepieces: 4 mm and 20 mm (1.25-inch sockets)
Barlow lens 3x (1.25-inch socket)
LED illuminated dot finder
Solar filter
Smartphone camera adapter
Accessory tray
Astronomy software as download
Instruction manual
Featuring a large mirror with a high focal length, this telescope allows you to observe a wide range of night sky objects. Thanks to the catadioptric system (integrated Barlow lens), the tube has a short design-despite the high focal length-making the telescope highly portable. The BRESSER Spica Plus also comes with high-performance mechanics, including a premium equatorial mount that allows you to set up the telescope in no time. A focuser is attached to the side of the tube, as is standard on a Newtonian reflector telescope. It comes with two eyepieces for observing at different magnifications. Explore the planets of our solar system and discover new worlds. And if youd like to capture your observations to share with others, you can take photos through the telescope using the supplied smartphone camera adapter.
Please note that Newtonian reflecting telescopes are ideal for astronomical observations, but are not suitable for observing wildlife and landscapes. For observing wildlife and landscapes, we recommend BRESSER refracting telescopes.FEATURESTelescope for observing the night sky and the sunOptical system: Newton reflectorMax. useful magnification: 260xLens diameter: 130 mm Focal length: 1000 mm Aperture ratio: f/7.7Mount: Equatorial mountEyepiece diameter: 31.7 mm (1.25) DELIVERY CONTENTTelescope with mountLens sun filterMoon and planet filter set (4 pcs)Eyepieces: 4 mm, 20 mmLED finder scope3x Barlow lensSmartphone cameraAluminium tripod Accessory trayAstro R-Lite torch
Connect your BRESSER Microscope or Telescope with a Nikon SLR camera and take images or videos of your observed object!The BRESSER T-Mount is the connecting piece between the camera adapter and SLR camera. To find out what T2-ring you need, look into the instruction manual of your camera.FEATURESConnecting piece between the camera adapter and Nikon SLR cameraHigh-quality and precise workmanship made of metalA corresponding camera adapter is neededSCOPE OF DELIVERYT2 Ring Nikon
The BRESSER First Light AR-102/1000 telescope is ideal for both ambitious beginners and experienced astronomers.
Discover the stunning features of Orion Nebula, which is located at a distance of 1500 light years (14,200,000,000,000 km) from earth!
The stable mount keeps the telescope stable, even at higher magnifications. Thanks to the high-quality mechanics, you can take your own photos of the moon and marvel at the dividing line between night and day (terminator).
The refractor telescope features an equatorial mount (also called a parallactic mount). Thanks to this two-axis mechanism, it is possible to compensate for the rotation of the earth, enabling you to precisely track your desired celestial object.
The telescope also comes with a wide range of accessories for exploring the night sky, including a prism for an upright and laterally correct image.
FEATURES
High-quality achromatic refracting telescope
Diameter: 102 mm / Focal length: 1000 mm F/9.8
EQ-3 equatorial mount
Height-adjustable tripod with accessory shelf
Made primarily of metal
Excellent focuser
Prism for an upright and laterally correct image
Includes wide range of accessoriesDELIVERY CONTENT
First Light AR-102/1000 optical tube
EQ3 mount
Tripod with accessory shelf
2 eyepieces (PL10 & PL25)
LED red dot finder
90° upright prism
3x Barlow lens
Smartphone holder
Enables you to connect a camera to telescopes that accept 2" barrel eyepieces. You will need a T2-ring for your special camera type also. The very special feature of this adaptor is the very short mechanical design (2.0mm) which enables the camera use also on telescopes with a short focal range. This adapter is also prepared to use with 2" filters.
NEW - now including a high-quality lens solar filter for the safe observation of sunspots, eclipses and planetary transits. A high quality telescope for night and solar observation.The BRESSER Messier 10 "Dobsonian is something very special. Despite the low price, it offers a variety of functions and quality that are sometimes unavailable in considerably more expensive telescopes. With its 254 mm diameter optics, this telescope is not limited to solar system observation of the Moon and brighter planets - you can also observe far out into the universe and see globular clusters, nebulae and galaxies. Details become visible in most deep-sky objects: globular clusters are broken down into individual stars and nebulae, which are only hinted at in smaller scopes, show considerable structure. This Dobsonian is unsurpassed in versatility within its price range: the excellent, large Hexafoc focuser has an opening of 65 mm - so even with large wide-field eyepieces, there is no noticeable vignetting from the eyepiece extension tube. The large elevation wheels also hold the telescope level with just the right amount of "sticktion", even when heavier eyepieces are used. And when a lot of heavier accessories are attached, such as the Bresser Binoviewer attachment, then the entire telescope tube can be moved within the tube rings - and everything is balanced again in a flash. The unsurpassed rigidity of the focuser makes it easy to focus - photography with this OTA is no problem either as the supplied extension tube for the focuser can be removed and a camera easily bought to a prime focus position. This is another strength of this universal telescope: if you want to take photos, you can simply unscrew the elevation wheels from the tube and place it on an equatorial mount with a standard dovetail rail - other rival Dobsonians do not offer this level of flexibility or pathway to more expansive astrophotography use. An optional dual speed 10:1 gear reduction for the focuser is available for those who need extra fine control of focus. If you consider that the focuser is the telescope part that is used most often, the supply of the Hexafoc on this telescope is a quantum leap for this price range.With the initial equipment you can observe immediately - a 6x30 viewfinder and a 25mm SPL eyepiece are included within the package. If you want to transport the device as compactly as possible, it is easy with the new 10 "BRESSER Messier - the rocker box can be dismantled in a few simple steps, as the parts are assembled with metal quick-release connectors. A bulky rocker box quickly becomes a handy flat package of boards within a few minutes. This is a telescope whose versatility, performance and ease of use set new standards in this price range.Please note that while Newtonian type reflecting telescopes are very good for astronomical observations in the night sky, they not well-suited for observing nature and landscapes during the day. We therefore recommend BRESSER refracting or Cassegrain designs of telescopes for additional nature and landscape observations.PROPERTIESType: mirror telescopeMirror diameter: 254mm / focal length: 1270mm / F / 5Maximum useful magnification: 508 timesTelescope for night and solar observation2.5" HEXAFOC focuserMain mirror made of special glass, with low thermal expansionHassle-free focusing, even with heavy accessoriesEasy to move tubeDismountable rocker boxTube mounting on altitude bikes using clampsUse of the optics on other mounts as wellAdjustment and construction screws of different sizesBase diameter 54cmWhat's IncludedTube with Newtonian opticsFull aperture Solar filter6x30 viewfinder25mm Super Plössl eyepiece (Ø 31.7 mm / 1.25 ")1 extension tube 37.5mm for 2.5 " Hexafoc1 eyepiece adapter 1.25" to 2"/31.7 to 50.8 mm2 Tube Rings2 Altitude support wheelsRocker box with 2 base plates and mounting material (disassembled for self-assembly)Shipping dimensions Box1: 134x44x44cm - 19.0kgShipping dimensions Box2: 61x61x24cm - 17.0kg
Take photos with your smartphone through your spotting scope, microscope or telescope. It’s a child's play with the BRESSER Universal Smartphone Adapter. Simply attach the adapter to the eyepiece holder of your optical device and then use all together as a telephoto lens for your smartphone camera. Now you can shoot distant objects as if they were up close or take photos through a microscope.FEATURESuniversal adapter to assemble the smartphone to a spotting scope or telescopefor eyepieces up to 68 mm diameterfor smartphones with a width of 50-88mmSCOPE OF DELIVERYSmartphone adapterManual
The BRESSER Space Explorer 150/750 telescope with an EQ-3 mount shows you the night sky in stunning detail. Go on a journey into distant worlds: Thanks to the combination of a large 150 mm aperture and a short 750 mm focal length, you can marvel at a vast array of celestial objects such as large nebula, open star clusters or the Andromeda galaxy. The powerful Newton reflector telescope is also great for observing our own solar system: with the 25-mm Plössl eyepiece, you can view the moon in 30x magnification. The premium parabolic primary mirror produces significantly sharper images and better contrasts than a comparable telescope with a simple spherical mirror. In addition, the telescope also has a large 55 mm secondary mirror that illuminates the field of view perfectly to create a bright image.
Portable design - with 150/750 reflector telescope
Cant wait to get out of the house to view the Orion Nebula or the Pleiades? With this telescope, you can search for the perfect observation spot: thanks to the short focal length, the tube is short and easy to transport. In addition, the premium equatorial mount allows even beginners to set up the telescope in no time. Tracking is also very simple you can compensate for the earths movements manually so that your observed objects stay within the field of view. To ensure maximum viewing comfort, the focuser on this Newton reflector telescope is attached to the side of the tube. The aluminium tripod is height-adjustable and features an accessory tray so that you can keep all your important gear within reach. The 6x30 finder scope with reticle allows you to align the telescope with objects in the night sky. The reticle indicates the position at which your telescope is pointing. If you want to capture images of your nighttime discoveries, you can connect your smartphone to the telescope via the smartphone camera adapter.
Discover the fascinating night sky with the BRESSER Space Explorer 150/750 telescope!
FEATURES
Reflector telescope for nighttime observations
Optical system: Newton reflector (parabolic primary mirror)
Lens diameter: 150 mm
Focal length: 750 mm
Max. useful magnification: 300x
Aperture ratio: f/5
Simple tracking by hand
Mount: EQ3, equatorial
Height-adjustable aluminium/stainless steel tripod with accessory tray
DELIVERY CONTENT
Tube
EQ3 mount
Height-adjustable field tripod
Plössl 10 and 25 mm eyepiece
6x30 finder scope
Smartphone holder
Instructions with warranty information
NEW - now including a high-quality aperture solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.When looking at the technical data, 80mm aperture may not look too impressive. During the observation the impact of the 31 % more light gathering power in respect to a 70mm refractor are easily visible: Details are seen more clearly in the BRESSER NANO AR-80/640 NANO and from a distance of 600 million km the main cloud bands on the planet Jupiter and many Messier objects gets visible. Richfield telescope with high quality achromatic glass lens and a short focal length of 640mm. Suitable also for traveling and to observe large open star clusterns and the milky way. The telescope arrives with a wide array of accessories and almost pre-assembled - observation can start immediately.
The BRESSER NANO is a light-to-medium-duty alt-azimuth mount with tripod designed to quickly and easily accept small to medium sized refractors, such as the AR-90s, AR-102s, AR-102xs and the ED-80 APO. Lightweight, fast Newtonians will also match up nicely with the BRESSER NANO AZ mount. As long as your telescope does not exceed 8 pounds and has a Vixen-Style Universal Dovetail bar for mounting the telescope to the mount head, you are good to go.
The stainless steel tripod that comes standard with the BRESSER NANO AZ mount has adjustable legs and a wide foot print, which makes the tripod more stable. Spreader vanes with an acessory tray locks against the inside of the legs to secure the tripod even further, and keep vibrations to a minimum. Do you want to capture what you see ? With the included smartphone holder bracket you can use your smartphone to easily take colour pictures of celestial objects - like through a telephoto lens ! With the included camera adapter ring T2 you can also attach your DSLR or CCD camera direct to the focuser in order to capture high resolution pictures of the Moon by using short exposure times.FEATURESHigh quality and compact refractor telescope Richfield telescope also for traveling Easy to use BRESSER NANO AZ Mount Telescope arrives almost pre-assembled MgF2-coated optics Magnification with supplied accessories: 25x, (max. suggested: 160x) Focal distance, aperture ratio: 640mm, f/8 Stainless steel field tripod Smartphone holder bracket included - for taking pictures Eyepiece diameter: 31.7mm (1.25'') Telescope for night and solar observationSCOPE OF DELIVERYOptical tube Messier AR-80/640 BRESSER NANO alt/azimuth mount Stainless steel tripod with accessory tray Eyepiece: BRESSER Super Plössl 26mm Red dot finder Diagonal mirror 1,25'' (31,7mm) Aperture solar-filterSmartphone camera adapter Camera-Adapter Ring T2 (M42x0.75mm) Star chart software & rotatable star-map
Besides air turbulence, the brightening of the night sky is the biggest obstacle to observing faint objects beyond the solar system. Street lamps and other artificial lighting mean that the sky in human settlements is no longer really black. This affects the contrast and thus the perception of deep-sky objects. Depending on the type of celestial object, however, part of disturbing artificial light can be filtered out, making it easier to observe fainter targets.The EXPLORE SCIENTIFIC CITY LIGHT SUPRESSION - or CLS - filter uses the fact that the artificial lighting is not evenly distributed over the entire spectrum. These colours - in the case of the EXPLORE SCIENTIFIC CLS nebula filter, above all the typical colours of mercury and high-pressure lamps, used in street lighting - are suppressed, but the emissions of deep-sky objects are allowed through. With a slightly brightened sky, some relatively bright deep-sky objects are practically invisible with a telescope, for example the large galaxy M101. Using this filter makes observation much easier. A must have for any visual amateur astronomer. The CLS can also be used as a useful photographic filter - helping to improve the quality of your telescopic deep sky photos.The EXPLORE SCIENTIFIC nebula filters are delivered with an individual test report - so you can be sure of receiving high-quality filters.SPECIFICATIONS:eliminates disturbing light - e.g. from street lightingenables observation of faint deep sky objectsWHAT'S INCLUDED:1x nebula filter
Enter the world of astrophotography now. With the new BRESSER HD moon and planet camera with ST4 autoguider function.
This camera is very good for astrophotography with short exposure times, i.e. for celestial objects like the moon, planets or star clusters. For astrophotography with long exposure times for low light deep sky objects, like galaxies and gas nebulae, we recommend the BRESSER Full HD Deep-Sky Camera (Art. No. 4959050) instead, with it's even higher resolution and sensor sensitivity.
Equipped with the new high-sensitivity SONY IMX225 CMOS colour sensor, the BRESSER HD moon and planet camera delivers amazing image results with very short exposure times, even with simple telescope equipment. In addition, this ultra-modern camera can also be used as an autoguider, e.g. to actively track the main imaging device with SLR or CCD astro camera. A universal CMOS colour camera that delivers super-sharp lunar and planetary images in particular.
The particularly low noise level of this new chip generation from SONY, ensures an exceptionally high brilliance and no cooling is required. Due to the high native pixel resolution of 1280x980, together with suitable telescopes, very beautiful images of the moon, but also detailed planetary images are possible.
The ToupSky pro software included in the scope of delivery not only offers the necessary basic functions for image and video recording, but also many helpful special functions for image post-processing and for setting up the Guider. Functions such as live image display, exposure settings, white balance, dark image capture, stacking, timelapse recordings and much more can be individually configured. Especially the very sophisticated software makes it really easy for you to get started in astrophotography. With the automatic settings, you can produce absolutely presentable results without much prior knowledge. If you wish, simply switch off the automatic settings and gradually venture into the individual professional settings.
Connect the camera directly to the ST4 connector of your telescope mount and you have fully automatic tracking control. This makes long exposures of several minutes possible without the stars producing unwanted line marks due to the ever-present synchronisation fluctuations of a telescope mount. A corresponding ST-4 connection cable is even included with the camera. Due to the high light sensitivity of the camera, you will always find a suitable guide star even with very short exposure times. For connection to guide tubes or off-axis guiders, the camera has a 1.25" plug-in sleeve, 1.25" filter thread (M28.5x0.6) and C-mount thread (1 "x1/32").
IMPORTANT NOTES:
This is not a stand-alone guider camera. You always need a Windows 10 / 11 computer to take pictures and for autoguiding.
The autoguider software is not included. You can use PHD2 Guiding, Guidedog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid).
DOWNLOAD PHD2-Guiding: https://openphdguiding.org/
DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html
DOWNLOAD latest camera software and drivers: http://www.touptek.com/download/showdownload.php?lang=en&id=2
SPECIFICATIONS
Camera type: BRESSER / Touptek GPCMOS01200KPF color
Sensor: SONY IMX225 CMOS colour
Image and video size: Full HD 1280 x 960 pixels (video 30-54,4 FPS)
Native sensor size in pixels: 1280 x 960
Exposure times: 102ms to 16min
Binning: YES, 1x1 and 2x2
Megapixel: 1.2 MP
Sensor size in mm: 4.8 x 3.6
Pixel size: 3.75 µm x 3.75 µm
Bit depth: 8/12 switchable
ST-4 Compatible Autoguider: YES
CNC milled housing made of aluminum
Protective strap on the camera housing
Camera tube diameter: 1.25 inch (31.7 mm)
Camera connection thread: C-mount + 1.25 "filter thread
Computer interface: USB 2.0
C-mount extension tube with 1.25 inch filter thread included
No IR cut filter installed
Operating system: WINDOWS 10 + 11
ASCOM and WDM driver included
Field of view for different focal lengths in mm (given in arc minutes):
400 mm - 41,2'x 30,9'
500 mm - 33'x 24,7'
600 mm - 27,5'x 20,6'
700 mm - 23,5'x 17,7'
800 mm - 20,6'x 15,4'
900 mm - 18,3'x 13,7'
1000 mm - 16,5'x 12,4'
1250 mm - 13,2'x 9,9'
1500 mm - 11'x 8,2'
1750 mm - 9,4'x 7,1'
2000 mm - 8,2'x 6,2'
SCOPE OF DELIEVRY
HD camera
C-mount adapter
USB 2.0 PC connection cable with a length of 180cm
Interface cable for ST-4 autoguider port with 150cm length
Dust cap for camera tube
Software CD
With the BRESSER WIFI Eyepiece Camera, you can now easily capture every fascinating view through a telescope, microscope, or binoculars. Simply slip it over the eyepiece, clamp it in place, and connect via app to your mobile device – and in no time, you can admire the live image of the optical instrument conveniently on your phone or tablet display. Start recording and look forward to high-resolution images and videos of your favourite objects!
High-quality eyepiece camera for detailed recordings
Enjoy your highlights from astronomy, microscopy, or nature observation in smooth 2K videos with or without sound. Or immortalize your most exciting subjects in razor-sharp photos. They are saved on a MicroSD card (not included) in the standard file formats MP4 and JPG.
Great features for new perspectives
A highlight of the eyepiece camera is the loop recording function: Simply let the camera automatically record videos for 1, 3, or 5 minutes over an extended period. You can then quickly see if something exciting has appeared in front of the lens. And so that your friends and family can also get a glimpse of your discoveries, share your videos and photos directly from the app.
Relive breathtaking moments over and over again – with the BRESSER WIFI Eyepiece Camera for binoculars, telescopes, microscopes, and more.
FEATURES
Universal WIFI eyepiece camera for telescopes, binoculars, microscopes, spotting scopes, etc.
Video resolution: 2K (25 fps) / 1,080 px (30 fps) (Full HD)
Photo resolution: 1,920 x 1,080 px / 2,304 x 1,296 px
CMOS sensor resolution: 4 MP
File formats: MP4 (video), JPG (photo)
Videos with and without sound recording
Loop recording function: 1 / 3 / 5 min.
App (iOS / Android) with user-friendly image / video editing functions
Max. recording time with WIFI: 130 minutes
Suitable for eyepiece housing diameters from 30 – 49 mm
Storage: MicroSD card up to 128 GB (not included)
SCOPE OF DELIVERY
Eyepiece camera
USB-C cable
Manual
Are you having trouble focusing your eyepiece or camera? Then use this 37.5 mm extension sleeve to increase the distance between the 2.5 inch HEXAFOC eyepiece extension and the eyepiece or camera. The extension sleeve has an M68x0.75 mm internal and external thread and can therefore be screwed directly onto the HEXAFOC draw tube. SPECIFICATIONSIncreases the distance to the eyepiece/cameraSuitable for 2.5 inch HEXAFOCOptical length: 37,5 mmInternal and external thread: M68x0,75 mmInside black matt coatedMaterial: aluminium, black anodizedSCOPE OF DELIVERYExtension sleeve 37,5 mm (1 piece)
Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER StarTracker Astronomical PhotoMount PM-100 is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain in pinpoint shape even with long exposures. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount with tripod with carry-case and polar wedge are also available as a bundle - Product No.: 4964120 Which cameras are basically suitable for use with the BRESSER photo mount ?
All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable.
The BRESSER StarTracker Astronomical Photo Mount PM-100 is designed for a camera with lens of max. 2.0 kg total weight to carry and track in polar mode. In Azimut mode also a camera weight up to 5.0kg is possible. Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the integrated pole finder tunnel, this is done quickly.
After setting up the light and compact StarTracker Photo Mount, simply set the approximate latitude (pole height) and aim Polaris through the integrated pole finder tunnel. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ... The tracking is carried out by a precise stepper motor, which can be controlled by an easy digital setup on LCD screen. Low power consumption allows up to 20 hours of operation with just one battery charge or simply use the micro USB port for an unlimited power supply. FEATURES Equatorial StarTracker Photo-Mount Automatic siderial tracking against the Earth rotation Different tracking speed setting possible Suitable for northern and southern henisphere Time lapse: from 15 minutes to 48 hours Ballhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 1/4" threaded bolt for ballhead mounting Additional quick release coupling for ball head removal High precision stepper motor with helical gear for accurate tracking Clear LCD screen and easy setup menu Battery operation 4 x AA batteries or mico USB (optional acc.) Battery life: up to 20 hours Weight Photo-Mont: 0.63kg Load capacity of Photo-Mount: up to 2.0kg/5.0kg (EQ/AZ) Optional Acc: Polar-wedge, Tripod and carry-case, optical pole finder scope with illumination unit SCOPE OF DELIVERY StarTracker astronomical Photo-Mount head Ballhead with quick release saddle plate User manual
Set of 5 extension tubes with T2 thread on both sides for exact distances and secure hold of cameras for astrophotography. Also comes with SC to T2 thread adapter.In astrophotography, most cameras are connected to a telescope via a T2 thread (M42x0.75), the most popular international standard. However, in many cases, T2 and T2-ring adapters for connecting telescope focusers to a camera are not sufficient, as specific distances must also be observed. This is especially important when using correctors, reducers or flatteners. This extension tube set, which consists of 5 mm, 7.5 mm, 10 mm, 15 mm and 30 mm tubes, will allow you to obtain almost any distance using the corresponding combination. Each tube has a T2 interior thread on one side and a T2 exterior thread on the other side.Most telescopes either include a T2 thread adapter, or the eyepiece can be used with a simple T2 thread adapter with a 2 plug-in diameter (item no. 0510365).However, Maksutov-Cassegrain, Schmidt-Cassegrain, ACF or RitcheyChrétien telescopes may use a so-called SC thread. To allow you to use this extension tube set with these telescopes, the set also includes an SD to T2 thread adapter.FEATURES5 T2 tubes with lengths from 5 mm to 30 mmCombination of tubes allows you to obtain distances of 5 mm to 67.5 mmFor exact camera distances in astrophotographyDELIVERY CONTENT5x T2 extension tubes (5/7.5/10/15/30 mm)1x SC to T2 thread adapter
NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.
For the price-sensitive planetary observer the AR-127L is a dream machine. View tiny dots and structures in the cloud bands of Jupiter, small rims and craters on the surface of the moon and details on Mars, including the ice-covered polar regions of our neighbouring planet. Watch Jupiter's moons dance around the planet and detect the greenish glow of Uranus far beyond Saturns orbit. The combination of large aperture and long focal length provides tack-sharp high-contrast pictures that will impress you every time anew.
CHARACTERISTICS OPTIC
Optical design: refractor telescopeLens diameter: 127 mm / focal length: 1200 mm / F/9.4Maximum recommended magnification: 354x
High-quality and light gathering achromatic objective lens
Modern multi-coating of the lenses for a bright and high-contrast image
Robust aluminium tube construction
Very high quality Hexafoc focuser with 2.5" free inner diameter
8x50 viewfinder with crosshair eyepiece; optimised finder mount for comfortable viewing
31.7mm (1.25") zenith mirror
Hand grip for comfortable transport with integrated camera holder (photo thread screw)
Prism rail with stainless steel clamping surface (44mm universal dovetail for GP/EQ5/LXD75)
50.8 to 31.7mm adapter with integrated T2 adapter (optional T2 ring required)
Smartphone adapter for celestial navigation included
Telescope for night and solar observing
CHARACTERISTICS MOUNT
Stable parallactic mount with fine drive in both axes
Ball bearings in both axes for more precise movements
Stable height adjustable stainless steel tripod ( Min. 69cm / Max. 109,5cm )
Load capacity up to 13 kg payload
Retrofittable with the Bresser Star Tracker Goto Kit ( item no. 4951750 )
Circular bubble for easy horizontal alignment
Pole height scale for setting the latitude
Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software
Pole finder scope with optional illumination ( item no. 4964212 )
Tripod weight: 4.7 kg
Mount weight: 5.6 kg (without counterweight)
Total weight incl. counterweight: 14.8 kg
Batteries: not included
Scope of delivery
optical tube
26mm Super Plössl eyepiece (31.7mm / 1.25")
31.7mm (1.25") zenith mirror
integrated 31.7 mm and T2 adapter
Prism rail with stainless steel clamping surface (44mm universal dovetail for GP/EQ5/LXD75)
8x50 viewfinder
Rotatable star chart
Lens solar filter
Tube clamps with carrying handle and camera mount
Smartphone adapter for celestial navigation
Astronomy PC software Stellarium (via download)
Bresser EXOS-2 mount
1 x 4.5 kg counterweight
Stainless steel tube field tripod with accessory tray
One of the most important obstacles for the exploration of the night sky is the brightening of the night sky by artificial lights, such as streetlights. The night sky is not really dark in the vicinity of towns or cities, which reduces the visibility of objects beyond the solar systems enormously. Depending on the type of the celestial object it is possible to increase the contrast dramatically by blocking the annoying artificial light. The EXPLORE SCIENTIFIC UHC filter uses a characteristic property of the so called emission nebulae. Those objects glow in special colours, their emission lines. Those emission lines are linked to chemical elements - in this case hydrogen at 486nm and 656nm, plus oxygen at 496nm and 501nm. The Explore Scientific UHC nebula filter blocks all other colours (and thereby nearly all of the artificial light) and only the emission line of the hydrogen and oxygen can pass the filter. The result is astonishing: suddenly nebulae are visible at locations that were completely empty without filters. In suburban skies for example the Owl-nebula M97, the Veil-nebula NGC6992 or even the bright Dumbell-nebula M27 are not clearly visible. By using this filter you can see the nebulae and their structures without problems. A must for every visual observer.
The EXPLORE SCIENTIFIC nebula filters come with a individual test certificate - your guarantee to receive a premium filter.FEATURESenables the observation of emission nebulaeblocks almost the entire artificial lightonly the two emission lines of hydrogen and oxygen passes the filterWHAT'S INCLUDED1x 1.25" UHC nebula filter
Are you having trouble focusing your eyepiece or camera? Then use this BRESSER 25 mm extension sleeve to increase the distance between the 2.5 inch HEXAFOC eyepiece extension and the eyepiece or camera. The extension sleeve has an M68x0.75 mm internal and external thread and can therefore be screwed directly onto the HEXAFOC draw tube.SPECIFICATIONSIncreases the distance to the eyepiece/camera Suitable for 2.5 inch HEXAFOC Optical length: 25 mm Internal and external thread: M68x0,75 mmInside black matt coated Material: aluminium, black anodized SCOPE OF DELIVERYExtension sleeve 25 mm (1 piece)
Field flattener without reduction factor for Explore Scientific ED80 , ED102 and ED127 APO Refractors
The imaging plane of many telescopes is not flat but curved. This means that only the area in the centre is perfectly focused - the edge becomes blurred. The human eye can usually compensate for this image property, but a camera shows increasing blurriness towards the edge of the image field. The Explore Scientific Zero X field flattener eliminates the field curvature in many telescopes with a focal length of approx. 480 to 952 mm. The Zero X field flattener was calculated and developed for Explore Scientific ED80, ED102 and ED127 apochromats with focal ratios of F=6.0 and F=7.5. The image sharpness at the edge is dramatically increased. The stars appear round and no longer distorted - a clear benefit for the whole image aesthetics. The Zero X image flattener can be used not only with Explore Scientific Apos, but also with many other Apos. This flattener does not change the focal length of the telescope.
Correction for up to full-frame camera sensors (24x36mm)
The Explore Scientific Zero X image flattener has been developed due to the rapid development of ever larger camera sensors. With it, there is finally a field flattener available that illuminates and corrects the field of view for full-frame camera sensors up to 24x36 mm.
How to use the Zero X field flattener with M48 thread connection
This field flattener has a 2 inch (50.8 mm) plug-in connection on the telescope side, with which it is inserted into the telescope instead of an eyepiece or star diagonal mirror. On the camera side, there is a standardised M48 x 0.75 mm connection thread. This M48 connection thread offers a larger free inner diameter than the usual T2 (M42) thread and prevents vignetting when using large camera sensors. With an optionally available and camera-specific adapter ring, a DSLR camera can be connected to it. The working distance is already set at 55 mm. Of course, mirrorless cameras or special astro cameras can also be used with the M48 thread connection. For this, the appropriate M48 spacer sleeves or adapters are additionally required to set the right working distance of 55 mm. This must always be done with every corrector or field flattener so that the best possible field flattening is achieved.Filter thread on telescope side availableThe telescope-side 2.0 inch plug-in sleeve has an M48x0.75 filter thread (internal thread). Individual 2.0 inch colour or nebula filters can be inserted here to increase the contrast of the images.FEATURESField flattener for Explore Scientific ED80, ED102 and ED127 APO telescopesRemoves field curvature from telescopesProduces round stars even at the edge of the image fieldImage sharpness at the edge is drastically increasedA clear benefit for the whole image aestheticsCorrection of field curvature for up to full-frame camera sensors (24x36 mm)Image field flattener without reduction factorOn the telescope side with 2 inch (50.8 mm) plug-in connection and M48x0.75mm filter threadCamera side with large M48 threaded connectorWorking distance of 55 mm between field flattener and camera sensorFor telescopes with a focal length of approx. 480 to 952 mmOptimised for telescopes with focal ratios from F=6.0 to F=7.5Can also be used for various other APOsFully multi-coating on all lens surfacesHousing made of lightweight aluminium, black anodisedAluminium dust cap for M48 threadSCOPE OF DELIVERYZero X field flattener (1 piece)Dust caps
BRESSER Full HD Deep Sky Camera with autoguider: a great camera for different types of astrophotography and for autoguiding. Not only suitable for planets, but also for deep-sky objects such as galaxies, nebulae and star clusters. Dedicated ToupSky Astro Imaging software supports video preview, video recording, video processing, image capture and processing, dark field correction and raw data output. Easy to use, but with professional results.
One of the main features of the new backlit SONY IMX290 CMOS sensor is its high light sensitivity, which makes it possible to detect deep-sky objects without active cooling. SONY has increased the quantum efficiency at 533 nm wavelength up to 77%, which is much better than other CMOS sensors have been able to achieve in the past.
Connect this camera to a guidescope and attach the camera's built-in ST-4 port, directly to your telescope's equatorial mount guide port and autoguide - using many popular audioguiding programs (PHD, Guidedog and more). Autoguiding enables you to take accurate pictures with long exposure times of several minutes. Thanks to the extra light-sensitive camera, you now always have a suitable guide star to hand, even using short exposure times. An ST-4 protocol connection cable is also included. Simple automatic tracking at its best.
You can use this camera with all guiding telescopes, or off-axis guiders that accept a 1.25 " tube, 1.25" filter thread (M28.5x0.6) or C-mount adapter thread (1 "x1 /32").
IMPORTANT NOTES:
This is not a stand-alone guider camera. You always need a Windows 10/11 computer to take pictures and for autoguiding.
The autoguider software is not included. You can use PHD2 Guiding, Guidedog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid).
DOWNLOAD PHD2-Guiding: https://openphdguiding.org/
DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html
DOWNLOAD latest camera software and drivers: http://www.touptek.com/download/showdownload.php?lang=en&id=2Download INDI Driver: https://github.com/indilib/indi-3rdparty/tree/master/indi-toupbase
SPECIFICATIONS
Camera type: BRESSER / Touptek GPCMOS02000KPA color
Sensor: SONY IMX290 CMOS color, backlit
Image and video size: Full HD 1936 x 1096 pixels (video 15 FPS)
Native sensor size in pixels: 1936 x 1096
Exposure times: 66µs to 16min
Binning: YES, 2x2
Megapixel: 2.1 MP
Sensor size in mm: 5.6 x 3.1
Pixel size: 2.9 µm x 2.9 µm
Bit depth: 8/12 switchable
ST-4 Compatible Autoguider: YES
CNC milled housing made of aluminum
Protective strap on the camera housing
Camera tube diameter: 1.25 "(31.7 mm)
Camera connection thread: C-mount + 1.25 "filter thread
Computer interface: USB 2.0
C-mount extension tube with 1.25 inch filter thread included
No IR cut filter installed
Operating system: WINDOWS 10 + 11
ASCOM driver included
Field of view for different focal lengths in mm (given in arc minutes):
400mm - 48.2 'x 27.3'
500 mm - 38.6 'x 21.8'
600 mm - 32.1 'x 18.2'
700 mm - 27.5 'x 15.6'
800 mm - 24.1 'x 13.6'
900 mm - 21.4 'x 12.1'
1000 mm - 19.3 'x 10.9'
1250 mm - 15.4 'x 8.7'
1500 mm - 12.9 'x 7.3'
1750 mm - 11.0 'x 6.2'
2000 mm - 9.6 'x 5.5'
SCOPE OF DELIEVERY
Full HD camera
C-mount adapter
USB 2.0 PC connection cable with a length of 200cm
Interface cable for ST-4 autoguider port with 150cm length
Dust cap for camera tube
Software CD
Connect your BRESSER Microscope or Telescope with a Sony System camera and take images or videos* of your observed object!T-Mounts
are the connecting piece between the T2 camera adapter and the system camera.
Please read the instruction manual of your camera to find out which
T-Mount you need, look into the instruction manual of your camera.The adapter will provide the necessary distance extension between the flange focal length of 18mm for E-Mount and 55mm for T2. The overall length is 37mm.For Sony NEX or ILCE cameras with E-Mount bajonet (e.g. Sony Alpha 6000, Sony A7S / A7R)SCOPE OF DELIVERYT2-Ring für Sony E-Mount camerasFor Sony NEX, ILCE Cameras (e.g. A7S, A7R)
€29.90*
Cookies
We use cookies to personalize and improve content and services, deliver relevant advertising, and provide a secure experience. You can review your cookie controls at any time. Learn more about the use and control of cookies in our Cookie Policy.
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Google Tag Manager debug mode:
Allows to run the Google Tag Manager in debug mode.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.