Double-stack filter for LS40THa telescopes.
The bandwidth of H-alpha systems can be reduced by so-called "double-stacking". A smaller bandwidth provides much more contrast at the solar surface, thereby many more details will become visible.
Double-stacking with a bandwidth of only <0.55 Angstrom is also possible at the LS40THa telescopes. Therefore Lunt Solar Systems has especially designed this LS40FHa double-stack filter in compact housing.
FEATURES
Aperture: 40 mm
Bandwidth: <0.55 Angstrom
Tuning: mechanical tilt-tuning
Housing diameter: 70mm
Length: 60mm
Weight: 0,3kg
only usable together with a LS40THa telescope!
SCOPE OF DELIVERY
LS40THa H-alpha double-stack filter
Instruction manual
Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-53 glass, 100mm aperture and 714mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night.
With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B1200 blocking filter.
Solar observing in H-alpha:
The LS100MT/B1200 is a complete telescope for observing the sun in H-alpha light, with 100mm free aperture (no central obstruction) and 714 mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.
Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.
Blocking-filter is the B1200. The B1200 is good for visual solar observing. Also solar imaging is possible by cameras with small sensor chip. We recommend a LS100MT with B1800 blocking-filter by using cameras with middle or large sized sensor chips, at very large sensor chips the B3400 blocking-filter.
The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection.
Observing the starry night sky:
The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551430) the 3-lens apochromatic refractor can then be used as a normal telescope with 100mm aperture and 714mm focal length for observation and photography of the night sky. The FPL-53 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551430.
Please note that the optionally available conversion kit 0551430 is absolutely necessary if the telescope should be used at night.
More applications:
With additionally available accessories the LS100MT offers even more possibilities!
- Double-Stack
The LS100MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.
- Solar observing in White-Light
If the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.
- Solar observing in Ca-K wavelength
Certainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS100MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.
This makes the LS100MT a completely universal usable apochromatic telescope of highest quality!
FEATURES
3-lens APO refractor, FPL-53
Aperture: 100mm (no central obstruction)
Focal length: 714mm
Bandwidth: internal Etalon with <0.7 Angstrom
Tuning: air pressure tuning system Pressure-Tuner
Blocking filter: B1200 with 1.25" and T2 connection
Focuser: R&P with 10:1 reduction
Two tube-ring with handle
Sol-Searcher installed inside handle
Dovetail bar at GP-level for astronomical mounts
Weight: 6.8kg
Length with blocking filter and dew-shield: 84cm
Length without blocking filter and removed dew-shield: 65cm
SCOPE OF DELIVERY
LS100MT Multipurpose Telescope
Pressure-Tuner
B1200 blocking filter in star-diagonal housing
2 inch R&P focuser with 10:1 reduction
Tube rings with dovetail bar
Transport case (78x33x23cm)
Instruction manual
Conversion kit for observation of the starry night sky (0551430) not included!
A very compact, complete telescope for observing the sun in H-alpha light.The LS50THa solar telescope offers 50 mm free aperture, 350 mm focal length, and provides a bandwidth of <0.75 Angstrom. The telescope is fitted as standard with the air-pressure tuning system "Pressure-Tuner", the Etalon is safely installed inside the telescope. Prominences and surface detail can quickly be viewed spontaneously. This very portable system is an ideal travel companion for wherever you go.A B600 blocking filter is installed inside the star diagonal. The B600 offers a larger field of view than the smaller B400 and is very good for visual solar observing. Focusing is achieved by a non-roting Helical focuser.Please note that there is only a small back-focus at this telescope, therefore solar-imaging is very difficult. The LS50THa is designed for visual solar observing. We recommend for imaging the 60mm telescopes of the LS60MT series.Also double-stacking with a bandwidth of only <0.5 Angstrom is possible by using the additional available LS50C filter (0550210). This filter threads directly onto the LS50THa telescope. Double-stacking will provide much more contrast, and more details on the sun will become visible.FEATURESAperture: 50 mmFocal Length: 350 mmBandwidth: <0.75 AngstromTuning: air-pressure tuning system "Pressure-Tuner"Blocking Filter: B600non-rotating Helical focuserTube-ring with 1/4-20 tapped base (standard thread for photo-tripods)Length: 37cmWeight: 2.1kgSCOPE OF DELIVERYLS50THa H-alpha Solar TelescopeB600 Blocking Filter in star-diagonalPressure-TunerTube ring with 1/4-20 connection for mounting on photo-tripodsnon-rotating Helical focuserInstruction manual
Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-53 glass, 100mm aperture and 714mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night.With innovative air pressure tuning system and good 2 inch (50.8mm) R&P focuser. Delivered without blocking filter, use for H-Alpha sun observation only possible with additional blocking filter!This telescope is supplied without blocking filter. We offer a wide range of additionally available blocking filters in different sizes, either mounted in a 90° star-diagonal housing or in a straight extension tube. These are all usable with this telescope.ATTENTION: Without such an additional blocking filter you cannot use this telescope for H-alpha solar observation!Solar observing in H-alpha:The LS100MT is a telescope for observing the sun in H-alpha light, with 100mm free aperture (no central obstruction) and 714mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.This version of the LS100MT is delivered without blocking filter. Therefore an additional blocking filter is required to use the telescope for solar observation in the H-alpha wavelength. You can choose from the wide range of Lunt Solar Systems blocking filters and decide for example if you want a blocking filter in a 90° star-diagonal housing or one in a straight extension tube.Observing the starry night sky:The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551430) the 3-lens apochromatic refractor can then be used as a normal telescope with 100mm aperture and 714mm focal length for observation and photography of the night sky. The FPL-53 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551430.Please note that the optionally available conversion kit 0551430 is absolutely necessary if the telescope should be used at night.More applications:With additionally available accessories the LS100MT offers even more possibilities!- Double-StackThe LS100MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS100MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS100MT a completely universal usable apochromatic telescope of highest quality!FEATURES3-lens APO refractor, FPL-53Aperture: 100mm (no central obstruction)Focal length: 714mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerSupplied without blocking filter, additionally available blocking filter absolutely necessary!Focuser: R&P with 10:1 reductionTwo tube-ring with handleSol-Searcher installed inside handleDovetail bar at GP-level for astronomical mountsWeight: 6.8kgLength with dew-shield: 78cmLength with removed dew-shield: 65cmSCOPE OF DELIVERYLS100MT Multipurpose TelescopePressure-Tuner2 inch R&P focuser with 10:1 reductionTube rings with dovetail barTransport case (78x33x23cm)Instruction manualConversion kit for observation of the starry night sky (0551430) not included!
Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-51 glass, 130mm aperture and 910mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night.
With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B1800 blocking filter.
Solar observing in H-alpha:
The LS130MT/B1800 is a complete telescope for observing the sun in H-alpha light, with 130mm free aperture (no central obstruction) and 910mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.
Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.
Blocking-filter is the B1800. The B1800 is good for visual solar observing and also solar imaging is possible by cameras with small to large sensor chips. We recommend a LS130MT with B3400 blocking-filter by using cameras with very large sized sensor chips.
The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection.
Observing the starry night sky:
The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. Then the 3-lens apochromatic refractor can be used as a normal telescope with 130mm aperture and 910mm focal length for observation and photography of the night sky. The FPL-51 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the R&P focuser of the telescope.
Please note that the optionally available conversion kit 0551696 is only absolutely necessary for the LS130MT version with B3400 blocking filter if the telescope is also to be used at night. The conversion kit is not required for the versions with B1200 and B1800.
More applications:
With additionally available accessories the LS130MT offers even more possibilities!
- Double-Stack
The LS130MT telescope can optionally be upgraded with the additionally available double-stack module LS130MT/DSII (item number 0551690). The DSII system is a internal double-stack module with Pressure-Tuner. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.
- Solar observing in White-Light
If the H-alpha unit has been removed, of course either a sun filter can be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.
- Solar observing in Ca-K wavelengthThe additionally available "LUNT Ca-K Filter Module for LS130MT" (item number 0551697) can be used on the LS130MT to observe and photograph super-granulation and other effects visible at this wavelength on the sun.
This makes the LS130MT a completely universal usable apochromatic telescope of highest quality!
FEATURES
3-lens APO refractor, FPL-51
Aperture: 130mm (no central obstruction)
Focal length: 910mm
Bandwidth: internal Etalon with <0.7 Angstrom
Tuning: air pressure tuning system Pressure-Tuner
Blocking filter: B1800 with 1.25" and T2 connection
Focuser: R&P with 10:1 reduction
Two tube-ring with handle
Sol-Searcher installed inside handle
Dovetail bar at GP-level for astronomical mounts
Weight: 12.1kg
Length with blocking filter and dew-shield: 100cm
Length without blocking filter and removed dew-shield: 80cm
SCOPE OF DELIVERY
LS130MT Multipurpose Telescope
Pressure-TunerB1800 blocking filter in star-diagonal housingTube extension for using without H-alpha Etalon
2 inch R&P focuser with 10:1 reduction
Tube rings with dovetail bar
Transport case (92 x 42 x 35 cm)
Instruction manual
Modular designed multipurpose telescope, both for observing the sun
in the H-alpha wavelength, as well as for night sky observations. Easy
conversion between the different applications with a few simple steps.
Excellent image quality due to 2-lens ED optics with 70mm aperture for
night sky observation, and 60mm usable aperture for H-alpha solar
observation.With innovative air pressure tuning system, high-quality 2 inch (50.8mm) Rack&Pinion (R&P) focuser, and B600 blocking filter.Solar observing in H-alpha:The LS60MT/B600 is a complete telescope for observing the sun in H-alpha light, with 60mm free aperture (no central obstruction) and 420mm focal length.
The H-alpha wavelength is the most impressive way to observe the sun,
showing protuberances at the sun's edge, filaments and flares on the
surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner.
Tuning is done by slightly changing the air pressure in a pressure
chamber inside the telescope. This changes the refractive index of the
air, making it easy to tune to the H-alpha line. The pressure tuner
guarantees a homogeneous image, without central obstruction, and a
permanently protected Etalon without erosion. A set of collimating
lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch Rack&Pinion focuser with 10:1 reduction.Blocking-filter is the B600.
The B600 is good for visual solar observing. Also solar imaging is
possible by cameras with small CCD chip. We recommend a LS60MT with
B1200 blocking-filter by using cameras with middle or large sized CCD
chips.The star diagonal in which the blocking filter is installed,
is equipped as standard for 1.25 inch eyepieces and with a T2 camera
connection.Observing the starry night sky:The H-alpha
Etalon system can be removed from the telescope in a few easy steps
thanks to its modular design. The 2-lens ED refractor can then be used
as a normal telescope with 70mm aperture and 420mm focal length for observation and photography of the night sky. The ED Doublet lens will offer an excellent image. It can be used with a standard 2 inch zenith mirror at the R&P focuser.With an additional Amici prism, the telescope can of course also be used during the day for nature and landscape observations.This makes the LS60MT, with its small dimensions and low weight, also an ideal travel telescope for all applications!More applications:With additionally available accessories the LS60MT offers even more possibilities!- Double-StackThe LS60MT telescope can optionally be upgraded with the additionally available double-stack filters LS50FHa or LS60FHa
(part numbers 0550200 and 0550250). These filters will be simply
screwed on the front of the LS60MT, no additional adapters are
necessary. Thereby a bandwidth of <0.5 Angstrom is achieved for
H-alpha solar observation. Therefore much more details on the solar
surface will become visible.- Solar observing in White-LightIf
the H-alpha unit has been removed, of course either a sun filter to be
installed in front of the objective, or a Herschel-wedge at the focuser
can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly,
the Ca-K filter modules from Lunt Solar Systems can also be used at the
LS60MT to observe and photograph super-granulation and other effects
visible in this wavelength on the sun.This makes the LS60MT a completely universal usable telescope!FEATURES2-lens ED refractor, FPL-51Aperture: 70mmUsable aperture in H-alpha: 60mm (no central obstruction)Focal length: 420mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerBlocking filter: B600 with 1.25 inch and T2 connectionFocuser: Rack&Pinion focuser with 10:1 reductionTube-ring with 1/4-20 tapped base (standard thread for photo-tripods)Weight with H-alpha unit: 3.8kgWeight without H-alpha unit: 2.6kgLength with H-alpha unit and blocking filter: 40cmLength without H-alpha unit: 31cmSCOPE OF DELIVERYLS60MT Multipurpose TelescopePressure-TunerB600 blocking filter in star-diagonal housing2 inch Rack&Pinion focuserTube ring with 1/4-20 connection for mounting on photo-tripodsTransport case (53x33x17cm)Instruction manual
Modular designed multipurpose telescope, both for observing the sun
in the H-alpha wavelength, as well as for night sky observations. Easy
conversion between the different applications with a few simple steps.
Excellent image quality due to 2-lens ED optics with 70mm aperture for
night sky observation, and 60mm usable aperture for H-alpha solar
observation.With innovative air pressure tuning system
and high-quality 2 inch (50.8mm) Rack&Pinion (R&P) focuser. Delivered without blocking filter,
use for H-Alpha sun observation only possible with additional blocking
filter!This telescope is supplied without blocking filter. We
offer a wide range of additionally available blocking filters in
different sizes, either mounted in a 90° star-diagonal housing or in a
straight extension tube. These are all usable with this telescope.ATTENTION: Without such an additional blocking filter you cannot use this telescope for H-alpha solar observation!Solar observing in H-alpha:The LS60MT is a telescope for observing the sun in H-alpha light, with 60mm free aperture (no central obstruction) and 420mm focal length.
The H-alpha wavelength is the most impressive way to observe the sun,
showing protuberances at the sun's edge, filaments and flares on the
surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner.
Tuning is done by slightly changing the air pressure in a pressure
chamber inside the telescope. This changes the refractive index of the
air, making it easy to tune to the H-alpha line. The pressure tuner
guarantees a homogeneous image, without central obstruction, and a
permanently protected Etalon without erosion. A set of collimating
lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch Rack&Pinion focuser with 10:1 reduction.This version of the LS60MT is delivered without blocking filter.
Therefore an additional blocking filter is required to use the
telescope for solar observation in the H-alpha wavelength. You can
choose from the wide range of Lunt Solar Systems blocking filters and
decide for example if you want a blocking filter in a 90° star-diagonal
housing or one in a straight extension tube.Observing the starry night sky:The
H-alpha Etalon system can be removed from the telescope in a few easy
steps thanks to its modular design. The 2-lens ED refractor can then be
used as a normal telescope with 70mm aperture and 420mm focal length for observation and photography of the night sky. The ED Doublet lens will offer an excellent image. It can be used with a standard 2 inch zenith mirror at the R&P focuser.With an additional Amici prism, the telescope can of course also be used during the day for nature and landscape observations.This makes the LS60MT, with its small dimensions and low weight, also an ideal travel telescope for all applications!More applications:With additionally available accessories the LS60MT offers even more possibilities!- Double-StackThe LS60MT telescope can optionally be upgraded with the additionally available double-stack filters LS50FHa or LS60FHa
(part numbers 0550200 and 0550250). These filters will be simply
screwed on the front of the LS60MT, no additional adapters are
necessary. Thereby a bandwidth of <0.5 Angstrom is achieved for
H-alpha solar observation. Therefore much more details on the solar
surface will become visible.- Solar observing in White-LightIf
the H-alpha unit has been removed, of course either a sun filter to be
installed in front of the objective, or a Herschel-wedge at the focuser
can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly,
the Ca-K filter modules from Lunt Solar Systems can also be used at the
LS60MT to observe and photograph super-granulation and other effects
visible in this wavelength on the sun.This makes the LS60MT a completely universal usable telescope!FEATURES2-lens ED refractor, FPL-51Aperture: 70mmUsable aperture in H-alpha: 60mm (no central obstruction)Focal length: 420mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerSupplied without blocking filter, additionally available blocking filter absolutely necessary!Focuser: Rack&Pinion focuser with 10:1 reductionTube-ring with 1/4-20 tapped base (standard thread for photo-tripods)Weight with H-alpha unit: 3.8kgWeight without H-alpha unit: 2.6kgLength with H-alpha unit and blocking filter: 40cmLength without H-alpha unit: 31cmSCOPE OF DELIVERYLS60MT Multipurpose TelescopePressure-Tuner2 inch Rack&Pinion focuserTube ring with 1/4-20 connection for mounting on photo-tripodsTransport case (53x33x17cm)Instruction manual
Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-53 glass, 100 mm aperture and 714 mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night.
With innovative air pressure tuning system, good 2 inch (50.8 mm) R&P focuser, and B3400 blocking filter.
Solar observation in H-alpha:
The LS100MT/B3400 is a complete telescope for observing the sun in H-alpha light, with 100 mm free aperture (no central obstruction) and 714 mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.
Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.
Blocking filter is the B3400. The B3400 is good for solar imaging by cameras with very large sensor chips and can also be used for visual solar observing.
The B3400 blocking filter is permanently installed inside the 2 inch R&P focuser. Common 2 inch star diagonals or other 2 inch accessories can be used.
Observing the starry night sky:
The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551430) the 3-lens apochromatic refractor can then be used as a normal telescope with 100 mm aperture and 714 mm focal length for observation and photography of the night sky. The FPL-53 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551430.
Please note that the optionally available conversion kit 0551430 is absolutely necessary if the telescope should be used at night.
More applications:
With additionally available accessories the LS100MT offers even more possibilities!
- Double-Stack
The LS100MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is an internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Thus much more details on the solar surface will become visible.
- Solar observing in White-Light
If the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.
- Solar observing in Ca-K wavelength
Certainly, the Ca-K filter modules from LUNT Solar Systems can also be used at the LS100MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.
This makes the LS100MT a completely universal usable apochromatic telescope of the highest quality!
FEATURES
3-lens APO refractor, FPL-53
Aperture: 100 mm (no central obstruction)
Focal length: 714 mm
Bandwidth: internal Etalon with <0.7 Angstrom
Tuning: air pressure tuning system Pressure-Tuner
Blocking filter: B3400 with 2 inch connection
Focuser: R&P with 10:1 reduction
Two tube-ring with handle
Sol-Searcher installed inside handle
Dovetail bar at GP-level for astronomical mounts
Weight: 6.8 kg
Length with dew-shield: 78 cm
Length with removed dew-shield: 65 cm
SCOPE OF DELIVERY
LS100MT Multipurpose Telescope
Pressure-Tuner
B3400 blocking filter installed inside focuser
2 inch R&P focuser with 10:1 reduction
Tube rings with dovetail bar
Transport case (78 x 33 x 23 cm)
Instruction manual
Conversion kit for observation of the starry night sky (0551430) not included!
Solar observation in H-Alpha: prominences, filaments, flares ... the most spectacular way to see the Sun - easy and affordable with the LS40THa.Complete H-alpha solar telescope with 40mm aperture, <0.7 Angstrom bandwidth, B1200 blocking-filter, and Helical focuser.The LS40THa/B1200 is a complete telescope for observing the sun in H-alpha, with 40mm aperture (no central obstruction) and 400mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An Etalon with mechanical tilt-tuning provides <0.7 Angstrom bandwidth.Fine adjustment is achieved with a 1.25 inch Helical focuser. Blocking-filter is the B1200, this is excellent for visual observation of the sun. The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepiece connection.The easy handling makes this telescope ideal for starting H-Alpha solar observation. Due to its compact dimensions it is also a good travel telescope for the experienced solar observers.The LS40THa telescopes are available with choice of B500, B600 or B1200 blocking filters. The larger blocking filters provide less edge obstruction and a larger field of view for visual observation and photography. Please note that these telescopes have only a very small back focus and therefore photography is difficult. We recommend special astro cameras for photography, which have a very short distance to the sensor, such as the BRESSER Full HD camera item number 4959050.FEATURESAperture: 40mm (no central obstruction, 2-lens refractor)Focal length: 400mmBandwidth: <0.7 AngstromTuning: mechanical tilt-tuningBlocking filter: B1200 with 1.25 inch connectionFocuser: Helical focuserDovetail bar at standard GP-level1/4-20 tapped base (standard thread for photo-tripods)Sol-Searcher includedWeight: 1.2kgLength: 41cmSCOPE OF DELIVERYLS40THa Solar TelescopeB1200 blocking filter in star-diagonal housing1.25 inch Helical focuserDovetail bar (GP level)Sol-SearcherInstruction manual
The LS80MT solar telescopes can be upgraded with this optional conversion kit. This allows the telescopes to be used as 2-lens ED apochromatic refractor for observation and photography of the starry night sky.The H-Alpha system of the LS80MT telescopes can be easily replaced by this conversion kit. The conversion kit offers a high quality and solid R&P focuser. Even the heaviest cameras or other accessories will be hold without any problems and can be focused sensitively by the integrated 10:1 reduction.Simply loosen three knurled screws holding the H-Alpha unit including the focuser at the LS80MT. Attach here the new focuser, and your LS80MT is transformed into a 2-lens apochromatic telescope. The new focuser offers 85mm focusing way with backlash- and tilt-free mechanics also when using heavy accessories. A 2 inch clamp is directly at the focuser, and an adapter to 1.25 inch is included in delivery.But this is not all: With this conversion kit Herschel-wedges or Ca-K modules can be used at the LS80MT telescopes for solar observation. This makes it possible to observe the sun in H-alpha, in Calcium-K wavelength light, or in White-Light - with one and the same telescope!This conversion kit turns the LS80MT into a real all-round telescope!FEATURESBacklash- and tilt-free mechanics85mm focusing way10:1 reduction2 inch and 1.25 inch connectionSCOPE OF DELIVERYHigh quality 2 inch focuser with adapter to LS80MT telescopesAdapter from 2 inch to 1.25 inchInstruction manualLS80MT telescope not included! Can only be used together with a LS80MT solar telescope. This conversion kit is absolutely necessary if a LS80MT telescope should be used for night sky observation.
The anti-reflection filter is an accessory for the DSII/SFPT double-stack module for the Lunt Solar Systems LS80MT and LS100MT telescopes. Reflections that may occur there can be effectively reduced with this anti-reflection filter if necessary.At the LS80MT and LS100MT multipurpose telescopes from Lunt Solar Systems, double-stacking is possible in H-alpha mode for solar observation with the internal DSII/SFPT double-stack modules (item number 0551395). The DSII modules reduce the bandwidth to <0.5 Angstroms. The DSII modules are designed to show better the surface details of the Sun, the contrast is significantly increased, and therefore filaments and active areas are better visible.But the DSII modules can also induce reflections, which can show up as a strong brightening around the sun. This so-called ''glow'' is not a problem when observing the solar surface. But it can complicate the observation of prominences, and many observers find it disturbing. The HRG/SFPT anti-reflection filter is designed to solve this problem. The filter effectively reduces the reflections. But please also note that the image will become darker by using this anti-reflective filter.The HRG/SFPT anti-reflection filter is easy to install. It is not necessary to return the telescope to the manufacturer, the filter can be easily installed by the user.This filter cannot be used separately! It can only be used on a Lunt Solar Systems LS80MT or LS100MT telescope together with a DSII/SFPT Double-Stack module.SCOPE OF DELIVERYHRG/SFPT anti-reflection filterInstruction manual
Field-flattener and focal length reducer for deep-sky astrophotography. Designed for the multipurpose APO telescopes of the Lunt-Solar-Systems LS80MT, LS100MT and LS130MT series.At the telescopes of the MT series from Lunt Solar Systems, the H-Alpha filter unit for solar observation can be removed, then these telescopes can be used as high quality ED APO's for observing and photographing the night sky.This accessory for the LS80MT, LS100MT and LS130MT telescopes shortens the focal length by a factor of 0.8x, providing a larger field of view for deep-sky astrophotography. This also allows shorter exposure times. At the same time, the field of view is flattened for photography.On the camera side, the reducer/field-flattener has a T2 male thread (M42x0.75). DSLR cameras can be connected here directly with a normal T2 ring.For other cameras, an M39x0.75 female thread is available in addition to the T2 male thread. The distance between reducer/field-flattener and camera sensor should be around 50 to 55mm. Normal T2 extension sleeves can be used to achieve this distance.On the telescope side, the following connections are provided: 2 inch socket, M54x0.75 male thread, M63x1 male thread and M68x1 male thread.FEATURESShortens focal length of F/7 ED telescopes by a factor of 0.8xFlattened field of view for photographyT2 thread for camera connectionWorking distance 50 to 55mm2 inch socket and M54x0.75 thread for connection to telescopesAdapter to M63x1 and M68x1Weight only reducer/field-flattener: 0.25kgWeight together with adapter to M63 & M68: 0.36kgSCOPE OF DELIVERY0.8x reducer/field-flattenerAdapter to M63x1 and M68x1
The LS130MT/B3400 telescopes can be upgraded with this optional Ca-K module and conversion kit. This allows to explore the Sun at different wavelengths with one and the same telescope, and the telescope can also be used for observing and photographing the starry night sky.You can replace the H-Alpha system of the LS130MT/B3400 telescope with this conversion kit with Ca-K module in just a few easy steps. This makes it possible to observe the Sun in H-alpha or in the light of the Calcium-K wavelength - with one and the same telescope!This Ca-K module was specially designed for the LS130MT/B3400 H-Alpha telescope. It is delivered as a set together with the conversion kit with a completely new focuser. Simply loosen three knurled screws at the LS130MT/B3400, which hold the H-Alpha unit together with the focuser. Here the new focuser will be fixed with the Ca-K module, and you have already made your LS130MT a adequate Ca-K telescope. But that's not all: With the new focuser, without the Ca-K module, the LS130MT/B3400 can also be used as a 3-lens apochromatic telescope for astronomical observations and photography at night!Or you can observe the Sun in White-Light together with a LUNT Herschel wedge!This conversion kit turns the LS130MT into a real all-round telescope!This conversion kit can also be used at the LS130MT/B1200 and LS130MT/B1800 telescopes, but it is not necessary there. This conversion kit is only necessary at the LS130MT/B3400, because at this telescope the blocking filter is fix installed inside the focuser.SCOPE OF DELIVERY2" Ca-K Module for LS130MT telescope2" focuser with 10:1 reduction and adapter to LS130MT telescopeInstruction manualLS130MT telescope not included! Can only be used together with an LS130MT solar telescope.
Solar observation in H-Alpha: prominences, filaments, flares ... the most spectacular way to see the Sun - easy and affordable with the LS40THa.Complete H-alpha solar telescope with 40mm aperture, <0.7 Angstrom bandwidth, B600 blocking-filter, and Helical focuser.The LS40THa/B600 is a complete telescope for observing the sun in H-alpha, with 40mm aperture (no central obstruction) and 400mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An Etalon with mechanical tilt-tuning provides <0.7 Angstrom bandwidth.Fine adjustment is achieved with a 1.25 inch Helical focuser. Blocking-filter is the B600, this is very good for visual observation of the sun. The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepiece connection.The easy handling makes this telescope ideal for starting H-Alpha solar observation. Due to its compact dimensions it is also a good travel telescope for the experienced solar observers.The LS40THa telescopes are available with choice of B500, B600 or B1200 blocking filters. The larger blocking filters provide less edge obstruction and a larger field of view for visual observation and photography. Please note that these telescopes have only a very small back focus and therefore photography is difficult. We recommend special astro cameras for photography, which have a very short distance to the sensor, such as the BRESSER Full HD camera item number 4959050.FEATURESAperture: 40mm (no central obstruction, 2-lens refractor)Focal length: 400mmBandwidth: <0.7 AngstromTuning: mechanical tilt-tuningBlocking filter: B600 with 1.25 inch connectionFocuser: Helical focuserDovetail bar at standard GP-level1/4-20 tapped base (standard thread for photo-tripods)Sol-Searcher includedWeight: 1.2kgLength: 41cmSCOPE OF DELIVERYLS40THa Solar TelescopeB600 blocking filter in star-diagonal housing1.25 inch Helical focuserDovetail bar (GP level)Sol-SearcherInstruction manual
A very compact, complete telescope for observing the sun in H-alpha light.The LS50THa solar telescope offers 50 mm free aperture, 350 mm focal length, and provides a bandwidth of <0.75 Angstrom. The telescope is fitted as standard with the air-pressure tuning system "Pressure-Tuner", the Etalon is safely installed inside the telescope. Prominences and surface detail can quickly be viewed spontaneously. This very portable system is an ideal travel companion for wherever you go.A B400 blocking filter is installed inside the star diagonal. The B400 is good for visual observing. Focusing is achieved by a non-roting Helical focuser.Please note that there is only a small back-focus at this telescope, therefore solar-imaging is very difficult. The LS50THa is designed for visual solar observing. We recommend for imaging the 60mm telescopes of the LS60MT series.Also double-stacking with a bandwidth of only <0.5 Angstrom is possible by using the additional available LS50C filter (0550210). This filter threads directly onto the LS50THa telescope. Double-stacking will provide much more contrast, and more details on the sun will become visible.FEATURESAperture: 50 mmFocal Length: 350 mmBandwidth: <0.75 AngstromTuning: air-pressure tuning system "Pressure-Tuner"Blocking Filter: B400non-rotating Helical focuserTube-ring with 1/4-20 tapped base (standard thread for photo-tripods)Length: 37cmWeight: 2.1kgSCOPE OF DELIVERYLS50THa H-alpha Solar TelescopeB400 Blocking Filter in star-diagonalPressure-TunerTube ring with 1/4-20 connection for mounting on photo-tripodsnon-rotating Helical focuserInstruction manual
Double-stack module for more contrast and details on the solar surface with the LS80MT and LS100MT telescopes.At the LS80MT and LS100MT telescopes double-stacking is possible with this internal DSII double-stack module when observing the sun in H-Alpha. The DSII modules reduce the bandwidth to <0.5 Angstrom. They are designed to show the surface details of the sun better, the contrast is significantly increased and therefore filaments and active regions are better visible.The DSII/SFPT module is designed exclusively for use in LS80MT and LS100MT telescopes, it cannot be used at other telescopes. It is used between the existing H-Alpha unit and the focuser on the telescope. Installation is simple, no additional adapters or tools are required.FEATURESBandwidth: <0.5 AngstromTuning: Air Pressure Tuning System SCOPE OF DELIVERYDSII module with internal Etalon for LS80MT and LS100MT telescopesPressure Tuner System(LS80MT or LS100MT telescope not included!)
The LS100MT solar telescopes can be upgraded with this optional conversion kit. This allows the telescopes to be used as 3-lens ED apochromatic refractor for observation and photography of the starry night sky.The H-Alpha system of the LS100MT telescopes can be easily replaced by this conversion kit. The conversion kit offers a very high quality and solid R&P focuser. Even the heaviest cameras or other accessories will be hold without any problems and can be focused sensitively by the integrated 10:1 reduction.Simply loosen three knurled screws holding the H-Alpha unit including the focuser at the LS100MT. Attach here the new focuser, and your LS100MT is transformed into a full 3-lens apochromatic telescope. The new focuser offers 95mm focusing way with backlash- and tilt-free mechanics also when using heavy accessories. A 2 inch ring-clamp is directly at the focuser, and an adapter to 1.25 inch also with ring-clamp is included in delivery.But this is not all: With this conversion kit Herschel-wedges or Ca-K modules can be used at the LS100MT telescopes for solar observation. This makes it possible to observe the sun in H-alpha, in Calcium-K wavelength light, or in White-Light - with one and the same telescope!This conversion kit turns the LS100MT into a real all-round telescope!FEATURESBacklash- and tilt-free mechanics95mm focusing way10:1 reduction2 inch and 1.25 inch ring clampingSCOPE OF DELIVERYHigh quality 2 inch focuser with adapter to LS100MT telescopesAdapter from 2 inch to 1.25 inchInstruction manualLS100MT telescope not included! Can only be used together with a LS100MT solar telescope. This conversion kit is absolutely necessary if a LS100MT telescope should be used for night sky observation.
Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 2-lens ED Apo telescope with FPL-53 glass, 80mm aperture and 560mm focal length - very good image quality for H-Alpha solar observation and also for observing the starry sky at night.With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B1800 blocking filter.Solar observing in H-alpha:The LS80MT/B1800 is a complete telescope for observing the sun in H-alpha light, with 80mm free aperture (no central obstruction) and 560mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.Blocking-filter is the B1800. The B1800 is very good for visual solar observing and also for photography.The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection.Observing the starry night sky:The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551330) the 2-lens ED Apo refractor can then be used as a normal telescope with 80mm aperture and 560mm focal length for observation and photography of the night sky. The FPL-53 doublet lens offers an low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551330.Please note that the optionally available conversion kit 0551330 is absolutely necessary if the telescope should be used at night.More applications:With additionally available accessories the LS80MT offers even more possibilities!- Double-StackThe LS80MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS80MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS80MT a completely universal usable ED Apo telescope of very good quality!FEATURES2-lens ED APO refractor, FPL-53Aperture: 80mm (no central obstruction)Focal length: 560mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerBlocking filter: B1800 with 1.25" and T2 connectionFocuser: R&P with 10:1 reductionTwo tube-ring with handleSol-Searcher installed inside handleDovetail bar at GP-level for astronomical mountsWeight: 4.95kgLength with blocking filter and dew-shield: 62cmLength without blocking filter and removed dew-shield: 50cmSCOPE OF DELIVERYLS80MT Multipurpose TelescopePressure-TunerB1800 blocking filter in star-diagonal housing2 inch R&P focuser with 10:1 reductionTube rings with dovetail bar and sol-searcherTransport case (78x33x23cm)Instruction manualConversion kit for observation of the starry night sky (0551330) not included!
Double-stack filter for LS50THa telescopes.The bandwidth of H-alpha systems can be reduced by so-called "double-stacking". A smaller bandwidth provides much more contrast at the solar surface, thereby many more details will become visible.Double-stacking with a bandwidth of only <0.55 Angstrom is also possible at the LS50THa telescopes. Therefore Lunt Solar Systems has especially designed this LS50C double-stack filter in compact housing. The filter threads directly onto the LS50THa telescopes.FEATURESAperture: 50 mmBandwidth: <0.55 AngstromTuning: mechanical tilt-tuningHousing diameter: 85 mmLength: 70 mmWeight: 0.7 kgFront thread: M80x1 female threadRear thread: M80x1 male threadonly usable together with a LS50THa telescope!SCOPE OF DELIVERYLS50C H-alpha double-stack filterInstruction manual
Please note: This telescope is made to customer specifications. Therefore special conditions apply for this telescope and online ordering is not possible. Please contact our customer service if you would like to order this telescope.Complete H-alpha solar telescope with 300mm aperture and a bandwidth of <0.5 Angstroms. With Feather-Touch focuser, innovative air pressure tuning system and B3400 blocking filter.A extremely large telescope for observing the Sun in H-alpha wavelength, a precisely adjusted refractor with a free aperture of 300mm without central obstruction and 2128mm focal length. The telescope is equipped as standard with a double-stack system, two internal Etalon filters with the innovative air pressure tuning system Pressure-Tuner achieve a bandwidth of <0.5 Angstroms. The Pressure-Tuner system ensures a homogeneous H-alpha image and optimal performance. The Etalons are safely installed inside the telescope. The air pressure tuning system is precisely controlled by an electronic pressure tuner controller.Blocking Filter is the B3400. The B3400 is well suited for imaging the Sun. For visual observation we recommend an additional zenith mirror. The straight extension tube, in which the blocking filter is installed, is equipped as standard with a 2" eyepiece holder and also with an adapter for 1.25". Focusing is done by the legendary Feather-Touch focuser from Starlight-Intruments with 10:1 reduction.FEATURESAperture: 300mm (no central obstruction)Focal length: 2128mmBandwidth: 2 internal Etalons with <0.5 AngstromsTuning: Air-pressure tuning systemElectronic pressure tuner controllerBlocking filter: B3400 with 2" and 1.25" connectionFocuser: Feather-Touch focuser from Starlight-Instruments with 10:1 reductionDovetail bar with Losmandy level for astronomical mountsWeight: ?kgLength: ?cmSCOPE OF DELIVERYLS300THa Double-Stack H-alpha solar telescope2x Pressure-TunerElectronic pressure tuner controllerB3400 blocking filter in straight extension tubeFeather-Touch focuserDovetail bar (Losmandy level)Manual
Solar observation in H-Alpha: prominences, filaments, flares ... the most spectacular way to see the Sun - easy and affordable with the LS40THa.Complete H-alpha solar telescope with 40mm aperture, <0.7 Angstrom bandwidth, B500 blocking-filter, and Helical focuser.The LS40THa/B500 is a complete telescope for observing the sun in H-alpha, with 40mm aperture (no central obstruction) and 400mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An Etalon with mechanical tilt-tuning provides <0.7 Angstrom bandwidth.Fine adjustment is achieved with a 1.25 inch Helical focuser. Blocking-filter is the B500, this is good for visual observation of the sun. The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepiece connection.The easy handling makes this telescope ideal for starting H-Alpha solar observation. Due to its compact dimensions it is also a good travel telescope for the experienced solar observers.The LS40THa telescopes are available with choice of B500, B600 or B1200 blocking filters. The larger blocking filters provide less edge obstruction and a larger field of view for visual observation and photography. Please note that these telescopes have only a very small back focus and therefore photography is difficult. We recommend special astro cameras for photography, which have a very short distance to the sensor, such as the BRESSER Full HD camera item number 4959050.FEATURESAperture: 40mm (no central obstruction, 2-lens refractor)Focal length: 400mmBandwidth: <0.7 AngstromTuning: mechanical tilt-tuningBlocking filter: B500 with 1.25 inch connectionFocuser: Helical focuserDovetail bar at standard GP-level1/4-20 tapped base (standard thread for photo-tripods)Sol-Searcher includedWeight: 1.2kgLength: 41cmSCOPE OF DELIVERYLS40THa Solar TelescopeB500 blocking filter in star-diagonal housing1.25 inch Helical focuserDovetail bar (GP level)Sol-SearcherInstruction manual
Please note: This telescope is made to customer specifications. Therefore special conditions apply for this telescope and online ordering is not possible. Please contact our customer service if you would like to order this telescope.Complete H-alpha solar telescope with 230mm aperture and a bandwidth of <0.5 Angstroms. With Feather-Touch focuser, innovative air pressure tuning system and B3400 blocking filter.A extremely large telescope for observing the Sun in H-alpha wavelength, a precisely adjusted refractor with a free aperture of 230mm without central obstruction and 1610mm focal length. The telescope is equipped as standard with a double-stack system, two internal Etalon filters with the innovative air pressure tuning system Pressure-Tuner achieve a bandwidth of <0.5 Angstroms. The Pressure-Tuner system ensures a homogeneous H-alpha image and optimal performance. The Etalons are safely installed inside the telescope. The air pressure tuning system is precisely controlled by an electronic pressure tuner controller.Blocking Filter is the B3400. The B3400 is well suited for imaging the Sun. For visual observation we recommend an additional zenith mirror. The straight extension tube, in which the blocking filter is installed, is equipped as standard with a 2" eyepiece holder and also with an adapter for 1.25". Focusing is done by the legendary Feather-Touch focuser from Starlight-Intruments with 10:1 reduction.FEATURESAperture: 230mm (no central obstruction)Focal length: 1610mmBandwidth: 2 internal Etalons with <0.5 AngstromsTuning: Air-pressure tuning systemElectronic pressure tuner controllerBlocking filter: B3400 with 2" and 1.25" connectionFocuser: Feather-Touch focuser from Starlight-Instruments with 10:1 reductionTwo tube ringsDovetail bar with Losmandy level for astronomical mountsWeight: 35kgLength: 165cmSCOPE OF DELIVERYLS230THa Double-Stack H-alpha solar telescope2x Pressure-TunerElectronic pressure tuner controllerB3400 blocking filter in straight extension tubeFeather-Touch focuserTube rings with dovetail bar (Losmandy level)Manual
Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-51 glass, 130mm aperture and 910mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night.
With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B3400 blocking filter.
Solar observing in H-alpha:
The LS130MT/B3400 is a complete telescope for observing the sun in H-alpha light, with 130mm free aperture (no central obstruction) and 910mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.
Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.
Blocking-filter is the B3400. The B3400 is good for solar imaging by cameras with very large sensor chips, and can also be used for visual observing.
The B3400 blocking-filter is fix installed inside the 2 inch R&P focuser.
Observing the starry night sky:
The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. Then the 3-lens apochromatic refractor can be used as a normal telescope with 130mm aperture and 910mm focal length for observation and photography of the night sky. The FPL-51 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the R&P focuser of the telescope.
Please note that the optionally available conversion kit 0551696 is absolutely necessary for the LS130MT version with B3400 blocking filter if the telescope is also to be used at night. The conversion kit is not required for the versions with B1200 and B1800.
More applications:
With additionally available accessories the LS130MT offers even more possibilities!
- Double-Stack
The LS130MT telescope can optionally be upgraded with the additionally available double-stack module LS130MT/DSII (item number 0551690). The DSII system is a internal double-stack module with Pressure-Tuner. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.
- Solar observing in White-Light
If the H-alpha unit has been removed, of course either a sun filter can be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.
- Solar observing in Ca-K wavelengthThe additionally available "LUNT Ca-K Filter Module for LS130MT" (item number 0551697) can be used on the LS130MT to observe and photograph super-granulation and other effects visible at this wavelength on the sun.
This makes the LS130MT a completely universal usable apochromatic telescope of highest quality!
FEATURES
3-lens APO refractor, FPL-51
Aperture: 130mm (no central obstruction)
Focal length: 910mm
Bandwidth: internal Etalon with <0.7 Angstrom
Tuning: air pressure tuning system Pressure-Tuner
Blocking filter: B3400 with 2 inch connection
Focuser: R&P with 10:1 reduction
Two tube-ring with handle
Sol-Searcher installed inside handle
Dovetail bar at GP-level for astronomical mounts
Weight: 12.1kg
Length with dew-shield: 95cm
Length removed dew-shield: 80cm
SCOPE OF DELIVERY
LS130MT Multipurpose Telescope
Pressure-TunerB3400 blocking filter installed inside focuserTube extension for using without H-alpha Etalon
2 inch R&P focuser with 10:1 reduction
Tube rings with dovetail bar
Transport case (92 x 42 x 35 cm)
Instruction manual
Starlight-Instruments Feather-Touch focuser for very precise focusing.This Feather-Touch focuser allows very fine and precise focusing. The Feather-Touch focuser provides a M35x0.5 thread on the telescope-side, therefore it can be used directly at all telescopes that have a M35x0.5 thread. At the eyepiece-side there is a T2 thread and a 1.25" connection.For example this Feather-Touch focuser can be used at all Lunt Solar Systems LS40THa and LS50THa telescopes. Please note that this Feather-Touch focuser allows very precise focusing at this telescopes, but it will not provide more back-focus than the standard helical-focuser.Technical data:• Length: 48mm to 65mm• Travel: 17mm• Diameter: 57mm• Weight: 350gDelivered by order:• 1.25" Starlight-Instruments Feather-Touch focuser
Complete H-alpha telescopes, ready to use from the start for visual observing and imaging the sun at 656.28nm wavelength. By far the most vivid and entertaining emission line, it will show you many details of the sun, like protuberances and filaments. Dedicated systems are optimized to provide the highest level of performance in compact packages.
Cookies
We use cookies to personalize and improve content and services, deliver relevant advertising, and provide a secure experience. You can review your cookie controls at any time. Learn more about the use and control of cookies in our Cookie Policy.
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Google Tag Manager debug mode:
Allows to run the Google Tag Manager in debug mode.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.