Kontrastverfahren in der Mikroskopie

The NIB 630 is the flagship of the NIB600 series of inverted microscopes. With such an inverted design, the device enables the microscopy of plankton, microalgae and cell cultures. Cell cultures can be examined directly in the culture vessel without taking samples. For particularly easy sample handling, it is equipped with a tiltable lighting unit. This means that even tall vessels can be placed comfortably without bumping against the lighting unit. The microscope head is equipped with a height-adjustable ergo viewing head. This allows users of different heights to adjust the microscope to a comfortable and ergonomic viewing height with a single hand movement. This special microscope is used in water management offices, research institutes and universities, in human and veterinary medicine, agriculture, marine biology, limnology, aquaculture and many more. The integrated display informs you at any time about the selected magnification and the status of the illumination as well as the ECO mode. The brightness can be programmed for each objective so that there is no need to readjust when changing magnification and the user is not blinded. OBJECTIVE The NEXCOPE NIB630 microscope is equipped with a quintuple nosepiece. A 4x planachromatic objective and one each of 10x, 20x and 40x planachromatic phase contrast objectives are included. The condenser has a numerical aperture of 0.3 and an extra long working distance. The objectives are calculated for a soil thickness of 1.2 mm. Please use appropriate culture vessels. The universal specimen holder is suitable for standard slides. EYEPIECES The eyepieces have a field of view of 22 mm. This gives you a very large field of view. The high eye point makes them very comfortable even for spectacle wearers. A rubber edge protects against scratches on contact. Dioptric compensation from -5 to +5 can be individually adjusted for each eyepiece. The interpupillary distance can be adjusted between 48 mm and 75 mm. The binocular can be tilted up and down to adjust the viewing height. ILLUMINATION The Koehler illumination provides the best possible light guidance of the microscopy light. This avoids stray light and only illuminates the just visible area in the specimen. This protects sensitive living specimens from excessive light irradiation. The powerful 3W LED can be adjusted in brightness and ensures optimal illumination. The brightness can be adjusted individually for each objective. If an objective is changed, the NEXCOPE NIB630 automatically adjusts the previously set brightness. The display shows the currently selected lens and the current brightness. The tiltable lighting unit makes it easier to work with taller sample vessels. The adjustable condenser with extra-long working distance enables quick readiness for use. MECHANICS In addition to coarse focusing, fine focusing helps to bring the specimen into focus very precisely. A full turn of the fine focusing knob moves the stage up or down by 0.2 mm. On the right side, the fine focus can be adjusted with a finger. The friction of the coarse focusing can also be varied. The fine focusing knobs are held magnetically and can be mounted on the left or right. The XY stage offers the possibility of inserting various holders. This allows slides or even petri dishes to be inserted. CAMERA CONNECTION The NEXCOPE NIB630 is specially designed for use with C-mount cameras. The camera connection is located on the side and has a switch between visual observation and camera (100/0 or 0/100). You can choose from two different adapters, depending on the sensor size: 0.5x C-mount adapter 1x C-mount adapter (already included in the scope of delivery) ACCESSORIES (optional) Hoffman Modulation Contrast Relief 3D contrast Terasaki holder, Petri dish holder 54 mm and 90 mm Camera adapter for C-mount 0.5x FEATURES Professional inverted transmitted light microscope Type of objectives: infinity plan achromatic (60 mm adjustment length, M25) Precise mechanics Very bright illumination SCOPE OF DELIVERY Inverted transmitted light microscope 4x objectives, of which 10x, 20x and 40x as phase contrast objectives Filter slider for phase contrast Universal sample holder Centering telescope for phase contrast

In the microscope's basis, there are a transmitted light LED illuminator (3 W) as well as the power supply and the continuous adjustable dimmer for transmitted light. The trinocular head allows to mount a SLR camera or a USB microscope camera with an optional adapter. The inclination of the eyepiece tubes is 30°. The fluorescence attachment includes a special LED wheel with four different lamps (green, blue, violett, ultraviolett), a filter wheel and a radiation shield. The LED lamps produces the exciting radiation in order to get fluorescence. Fluorescence microscopy is done e. g. in biology, medicine, microchemistry, geology, semiconductor production and environmental protection. The Science ADL 601F LED is an instrument with an excellent value for money. It has also the other features, which are typical for high-quality microscopes: fourfold objective nosepiece, lengthwise and cross moveable stage, coaxial focusing knobs (concerning fine drive: 200 µm / full turn), adjustment of eye relief, diopter adjustment and the phototube. Optional available, general accessories are the wide field eyepieces (WF10x, WF15x), the dividing eyepiece (WF10x), and dark field condensers (dry and oil). FEATURESType: biology MicroscopeView: TrinocularApplication range: Biology, Gemology, Botany, Education, Teaching, Entomology, Forensic, Research, Laboratory, Medical science, Pathology, Veterinary medicineIllumination:  LEDLevel: Intermediate, ExpertWarranty: 2 years1.25 Abbe-condenser with iris diaphragm and filter holderIncl. adjustable mechanical stage Integr. dimmerAdjustable eye reliefDiopter adjustment SCOPE OF DELIVERYMicroscope4 DIN-objectives (PL 4x, PL 10x, PL 100x oil, PL-FL 40x)2x 10x eyepieces 1.25 Abbe-condenser with iris diaphragm and filter holderFluorescence attachment with LED wheel (green, blue, violett, ultraviolett) and respective emission filtersImmersion oilFull Koehler illumination for transmitted light

The well-designed combo set with the professional Science MTL-201 microscope and the high-resolution MikroCam PRO HDMI 5MP, together with the 13.3" monitor, offers a powerful complete solution for precise metallurgical examinations and diverse laboratory applications. The direct image transmission to the monitor enables comfortable live observation, vivid presentations, and efficient documentation - ideal for research and quality assurance.The Microscope in DetailThe BRESSER Science MTL 201 is a specialised reflected light microscope that allows the observation of non-transparent surfaces at higher magnifications (50x-800x). Ideal fields of application for this very solidly manufactured instrument include metallography (e.g. polished sections of metals and alloys), mineralogy, precision mechanics, electronics, and the semiconductor industry; it is suitable for scientific research and teaching as well as industrial production (e.g. quality control). According to its purpose, the MTL 201 features a very large stage (250 mm x 230 mm), which can be roughly moved with a handle and finely adjusted with cross and longitudinal drives. For perfect focusing, coarse and fine focus (coaxial; approx. 70 µm/turn) are available. The reflected light illumination is provided by a halogen bulb (20 W) with adjustable light intensity through the objective. A centring field diaphragm, a selection of filters (yellow, green, blue, matte), and a polariser/analyser combination are available to the observer. The five-position turret is equipped with planachromatic DIN objectives (5x, 10x, 20x, 40x, 80x). The trinocular microscope head carries the eyepiece tubes inclined at 30° and the photo tube. The widefield eyepieces (WF10x) are adjustable for eye distance and dioptre difference. The photo tube allows digital image capture, e.g. via an optionally available PC eyepiece. Additional optional accessories: eyepiece (WF16x), measuring eyepiece (WF10x), planachromatic objective (50x).The BRESSER Science MTL 201 is a specialised reflected light microscope that enables surface examinations of metals or plastics. It is therefore excellently suited for quality testing or tissue examination.MICROSCOPE SCOPE OF DELIVERYMicroscopeEyepieces (2 pieces WF 10x)Objectives (5x, 10x, 20x, 40x, 80x)Coaxial cross tableColour filters (green, blue, yellow, matte)Dust coverPower cableThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality combined with user-friendly operation. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (Art. No. 5914110) can be mounted directly on the camera and provides brilliant and high-contrast images.For high-resolution microphotos, this camera features a high-quality Sony 5MP sensor, allowing images and videos to be saved on an SD card at resolutions higher than Full HD.The camera functions are operated via mouse directly on the on-screen menu. Measurements can now also be performed via the on-screen menu, turning your microscope with the MikroCam Pro HDMI 5MP into a fully-fledged digital measuring microscope.Additionally, the camera can provide the microscope view in a wireless network via a WiFi module. However, a USB connection to a PC is no longer provided with this model. For this, we recommend the MikroCam Pro HDMI 5914180 model.The professional MikroCamLabII software is still included, allowing images to be edited and analysed afterwards.Image Analysis Software Included in the Following Languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseChinese (Simplified)Chinese (Traditional)The software offers numerous functions for image processingMeasurement function (additional stage micrometer required e.g. Bresser article no. 5916720): distances, angles, areas (polygon, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range)MICROSCOPE CAMERA FEATURESHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (stage micrometer Art. No. 5916720 required for calibration)Wide dynamic range function (WDR)Saving images and videos on SD card (not included) max. 32 GBSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0MICROSCOPE CAMERA SCOPE OF DELIVERYMikroCam Pro HDMI 5MP with C-Mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can continue to use the microscope as usual and simultaneously view the image on the monitor. The display provides optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality.The microscope camera image is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. Display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is especially advantageous when working under microscopic control.Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture can be uncomfortable for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable short, angled HDMI cable is also included, so cable clutter at the workplace is avoided. Mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.DISPLAY FEATURES16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINIWide viewing angle (178°)No separate power supply necessarySCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Allen keyOperating instructions

The well-designed combo set with the professional Science MTL-201 microscope and the high-resolution MikroCam PRO HDMI autofocus, together with the 13.3" monitor, offers a powerful complete solution for precise metallurgical examinations and diverse laboratory applications. The direct image transmission to the monitor enables comfortable live observation, vivid presentations, and efficient documentation - ideal for research and quality assurance.The Microscope in DetailThe BRESSER Science MTL 201 is a specialised reflected light microscope that allows the observation of non-transparent surfaces at higher magnifications (50x-800x). Ideal fields of application for this very solidly manufactured instrument include metallography (e.g. polished sections of metals and alloys), mineralogy, precision mechanics, electronics, and the semiconductor industry; it is suitable for scientific research and teaching as well as industrial production (e.g. quality control). According to its purpose, the MTL 201 features a very large stage (250 mm x 230 mm), which can be roughly moved with a handle and finely adjusted with cross and longitudinal drives. For perfect focusing, coarse and fine focus (coaxial; approx. 70 µm/turn) are available. The reflected light illumination is provided by a halogen bulb (20 W) with adjustable light intensity through the objective. A centring field diaphragm, a selection of filters (yellow, green, blue, matte), and a polariser/analyser combination are available to the observer. The five-position turret is equipped with planachromatic DIN objectives (5x, 10x, 20x, 40x, 80x). The trinocular microscope head carries the eyepiece tubes inclined at 30° and the photo tube. The widefield eyepieces (WF10x) are adjustable for eye relief and dioptre difference. The photo tube allows digital image capture, e.g. via an optionally available PC eyepiece. Additional optional accessories: eyepiece (WF16x), measuring eyepiece (WF10x), planachromatic objective (50x).The BRESSER Science MTL 201 is a specialised reflected light microscope that enables surface examinations of metals or plastics. Thus, it is excellently suited for quality testing or tissue examination.MICROSCOPE SCOPE OF DELIVERYMicroscopeEyepieces (2 pieces WF 10x)Objectives (5x, 10x, 20x, 40x, 80x)Coaxial cross tableColour filters (green, blue, yellow, matte)Dust coverPower cableThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality combined with user-friendly operation. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (Art. No. 5914110) can be mounted directly on the camera and provides brilliant and high-contrast images. Due to its very high light sensitivity, good image quality is ensured even in low light. This model is particularly recommended for darkfield or phase contrast.The autofocus allows optimal focusing of the camera without using the microscope's focus wheels. This ensures parfocality on various trinocular microscopes. The focussable range extends from position 0, which corresponds to the C-Mount distance, through focusing up to 5.4 mm forward, thus also reaching the CS-Mount distance, and additionally up to 10.6 mm inward to cover an even larger range. Besides autofocus, the camera can also be focused manually via mouse. Focus adjustment to a specific area is also possible.Camera functions are operated via mouse directly on the on-screen menu. Measurements can be performed via the on-screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully functional digital measuring microscope.The MikroCam PRO HDMI Autofocus offers a variety of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine visionThus, the MikroCam PRO Autofocus is excellently suited as an industrial camera with a very good price-performance ratio.Additionally, the camera can provide the microscope view in a wireless network via WiFi module. When connected via HDMI, images and videos can be recorded directly on an SD card (not included). A USB connection to a PC is not provided for this model. For this, we recommend the MikroCam Pro HDMI 5914180 model.MICROSCOPE CAMERA FEATURESHDMI connection for monitor or televisionBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (*object micrometer Art. No. 5916720 required for calibration)Wide dynamic range function (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-Mount distance) to 10.6 mm1/4" tripod thread, e.g. for a photo tripodC-Mount thread: for easy adaptability, also suitable for C-Mount objectivesSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and simultaneously view the image on the monitor. The display provides optimal image quality with a wide viewing angle of 178°! Thus, several people can view the image without loss of quality.The microscope camera image is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. Display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is especially advantageous when working under microscopic control.Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable short, angled HDMI cable is also included, so cable clutter at the workplace is avoided. Mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.DISPLAY FEATURES16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINIWide viewing angle (178°)No separate power supply necessarySCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Allen keyUser manual

The powerful combination set with the professional Science ADL-601P microscope, the high-performance MikroCam PRO HDMI 5MP, and the matching display offers a comprehensive solution for demanding brightfield and darkfield observations. Ideal for modern laboratory use, it enables comfortable live presentation, precise analysis, and efficient documentation – perfect for research and quality control.The Microscope in DetailThe BRESSER Science ADL 601 P is a professional brightfield and darkfield microscope. The microscope base features a halogen transmitted light illumination (20 W) as well as the power supply and the two continuously adjustable dimmers for brightfield and darkfield. The two trinocular microscope heads combine both illumination functions, as well as the possibilities for photography and binocular observation; the inclination of the eyepiece tubes is 30°. With the polarization attachment, material science or apparatus technical investigations can be carried out in research, teaching, and production. The halogen brightfield illumination (20 W), which goes through the objective onto the specimen, can be modified for special applications using a color filter wheel and a polarizer/analyzer combination. Overall, the BRESSER Microscope Science ADL 601P is a uniquely priced instrument that also features the further equipment typical for high-quality microscopes: four-objective turret, cross table with transverse and longitudinal movement, coaxial focusing drives (fine: 200 µm/revolution), eyepiece distance and diopter adjustment, as well as a photo tube. Optional general accessories include wide-field eyepieces (WF10x, WF16x), measuring eyepiece (WF10x), various plan achromatic DIN objectives (e.g., 4x, 5x, 10x, 20x, 40x spring-loaded, 60x spring-loaded, 100x oil spring-loaded), the Abbe condenser (numerical aperture 1.25; with iris diaphragm and additional lens), darkfield condensers (dry and oil), immersion oil, and a phase contrast device.The Science ADL-601P combines a biological transmitted light microscope with a brightfield microscope. This also allows for the examination of surfaces at the highest resolution!SCOPE OF DELIVERY MICROSCOPEMicroscopeEyepieces (pair DIN WF 10x)Objectives (PL5x, PLL10x, PLL40x, PLL60x)Abbe condenser (1.25 with iris diaphragm)The Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality while also being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images.For high-resolution micro photos, this camera features a high-quality Sony 5MP sensor, allowing images and videos to be saved on SD card with higher resolution than Full HD.The operation of the camera functions is done via mouse directly on the screen menu. Through the screen menu, measurements can now also be performed, turning your microscope with the MikroCam Pro HDMI 5MP into a fully-fledged digital measuring microscope.Additionally, the camera can also provide the microscope view in a wireless network via WiFi module. However, a connection to the PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.The professional software MikroCamLabII is still included, allowing images to be edited and evaluated later with the software.Software for image evaluation included in the following languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseSimplified ChineseTraditional ChineseThe software features numerous functions for image processingMeasurement function (additional object micrometer required, e.g., Bresser Art. No. 5916720): lengths, angles, areas (polygons, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range)FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or televisionBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY MICROSCOPE CAMERAMikroCam Pro HDMI 5MP with C-Mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen provides brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows for observation independent of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable short angled HDMI cable is also included, so that cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply requiredSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyOperating instructions

The powerful combination set with the professional Science ADL-601P microscope, the high-performance MikroCam PRO HDMI Autofocus, and the matching screen offers a comprehensive solution for demanding brightfield and darkfield observations. Ideal for modern laboratory use, it enables comfortable live display, precise analyses, and efficient documentation – perfect for research and quality control.The Microscope in DetailThe BRESSER Science ADL 601 P is a professional brightfield and darkfield microscope. The microscope base contains a halogen transmitted light illumination (20 W) as well as the power supply and the two continuously adjustable dimmers for brightfield and darkfield. The two trinocular microscope heads combine both illumination functions, as well as the possibilities for photography and binocular observation; the inclination of the eyepiece tubes is 30°. With the polarization attachment, material science or apparatus technical investigations can be carried out in research, teaching, and production. The halogen brightfield illumination (20 W), which goes through the objective onto the specimen, can be modified for special applications using a color filter wheel and a polarizer/analyzer combination. Overall, the BRESSER Microscope Science ADL 601P is a uniquely priced instrument that also features the further equipment typical for high-quality microscopes: four-objective turret, cross table with transverse and longitudinal movement, coaxial focusing drives (fine: 200 µm/revolution), inter-pupillary distance and diopter adjustment, as well as a photo tube. Optional general accessories include wide-field eyepieces (WF10x, WF16x), measuring eyepiece (WF10x), various plan achromatic DIN objectives (e.g., 4x, 5x, 10x, 20x, 40x spring-loaded, 60x spring-loaded, 100x-oil spring-loaded), the Abbe condenser (numerical aperture 1.25; with iris diaphragm and additional lens), darkfield condensers (dry and oil), immersion oil, and a phase contrast device.The Science ADL-601P combines a biological transmitted light microscope with a brightfield microscope. This also allows for the examination of surfaces at the highest resolution!SCOPE OF DELIVERY MICROSCOPEMicroscopeEyepieces (pair DIN WF 10x)Objectives (PL5x, PLL10x, PLL40x, PLL60x)Abbe condenser (1.25 with iris diaphragm)The Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality while being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images. Due to its very high light sensitivity, good image quality is ensured even in low light. This model is especially recommended for darkfield or phase contrast.The autofocus allows for optimal focusing of the camera without using the microscope's focusing wheels. This ensures parfocality on various trinocular microscopes. The focusable range extends from the 0 position, corresponding to the C-Mount distance, over a maximum forward focus of 5.4 mm, thus also reaching the CS-Mount distance and additionally up to 10.6 mm inward to cover an even larger range. Besides autofocus, the camera can also be manually focused using a mouse. A focus adjustment to a specific area is also possible.The operation of the camera functions is done via mouse directly on the screen menu. Measurements can be performed via the screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully-fledged digital measuring microscope.The MikroCam PRO HDMI Autofocus offers a variety of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine visionThus, the MikroCam PRO Autofocus is excellently suited as an industrial camera with a very good price-performance ratio.Additionally, the camera can also provide the microscope view in a wireless network via WiFi module. If the camera is connected via HDMI, images and videos can be recorded directly on an SD card (not included). However, a connection to the PC via USB is no longer provided for this model. For this purpose, we recommend the MikroCam Pro HDMI model 5914180.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (*Object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-Mount distance) to 10.6 mm1/4" tripod thread e.g. for a photo tripodC-Mount thread: for easy adaptability, also suitable for C-Mount objectivesSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY MICROSCOPE CAMERACamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. Thus, observation can be done independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be operated with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so that cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

In contrast to usual light, polarized light has a preferred vibration plane of the light waves. Polarized light lets be seen anisotropic objects, whose observable properties are depending on the direction, "in a new light": crystals, but also animal hairs, feathers, muscles, nerve fibres and vegetable cell walls, which have a preferred direction of its biomolecules, show structures now, which were hidden in the normal bright field image. Images made by polarized light are often characterized by a fantastic coloring. Polarization microscopes are used particularly in mineralogy, geology, biology and medicine. In order to change the object's direction in a controlled way, the Science MPO 401 has a round, center-adjustable and full rotatable object stage with degree scale. The illumination and observation unit encloses e. g. the halogen bulb lamp (20 W) with dimmer, the field diaphragm (used to achieve the Köhler illumination), the 360° rotatable polarizer (for the production of polarized light), centering implements for the objectives and the analyzer attachment (for the analysis of the polarized light). The analyzer attachment is meant for receiving the 360° rotatable analyzer and optional available sliders (Bertrand lens for conoscopy; quartz wedge, lambda plate and lambda/4 plate used in order to get special colour effects). The wide field eyepieces (WF10x), which are also optional available, are placed at the trinocular head with an inclination of 30°. They have eye relief adjustment as well as diopter adjustment. The images shown by them are bright, true colored, sharp and rich in details. Apart from the slips and eyepieces, which were mentioned above, the accessories of the MPO 401 contain a dividing eyepiece (WF10x), the Abbe condenser with iris diaphragm, special polarization objectives (4x, 10x, 40x retractable, 100x-oil retractable), filters (blue, ground glass) and immersion oil. SCOPE OF DELIVERYmicroscope2x WF10x eyepieces 4 DIN-objectives (PL4x, PL10x, PL40x, PL100x oil)360° rotatable mechanical stage phasen shifter Amici Bertrand lenspolarizer/analyzer combinationdust coverpower cable

The BRESSER Science MTL 201 is a special reflected light microscope, which allows to observe non-transparent surfaces at higher magnifications (50x-800x). This solid designed instrument is ideal for working in metallography (e. g. microscopy of polished samples of metals or alloys), mineralogy, precision engineering and electronics. It is suitable for scientific research, teaching demonstration and industrial production (e.g. quality controlling). According to its purposes, the MTL 201 is equipped with a large stage (250 mm x 230 mm), which can be moved coarsely by a quick adjustment lever and finely by a transverse and a longitudinal knob. The focuser has coarse and fine drive (coaxial; circa 70 µm/ full turn). The illumination is done by a halogen lamp (20 W) with a dimmer. The light comes through the objective from above onto the sample. There are a field diaphragm, which can be centered, some filters (yellow, green, blue, ground glass) and a polarizer/analyzer combination. The fivefold nosepiece is equipped with planachromatic DIN objectives (5x, 10x, 20x, 40x, 80x). The trinocular head bears two 30° inclined ocular tubes and the photo tube. The oculars (with 10x wide field lenses) have diopter and eye relief adjustments. The photo tube allows for digital imaging, e. g. with an optional available PC eyepiece. Further optional accessories: Eyepiece (WF16x), dividing eyepiece (WF10x), planachromatic objective (50x). FEATURESType: Metallurgical microscopeView: Trinocular Comfortable binocular view, 30° declinedApplication range: Metallurgy, Mineralogy, Research, Laboratory, Quality inspection, Quality inspectionIllumination: Halogen Transmitted 12V/30W, adjustableLevel: Intermediate, ExpertWarranty: 2 yearsIntegr. dimmerGenerously dimensioned object plateAdjustable eye reliefDiopter Adjustment SCOPE OF DELIVERYMicroscopeEyepieces (2x WF 10x)Objective lenses (5x, 10x, 20x, 40x, 80x)Coaxial stageColour filters (green, blue, yellow, matt)Dust coverPower cable

In the microscope's basis, there are a transmitted light halogen illuminator (20 W) as well as the power supply and the continuous adjustable dimmers for reflected light and transmitted light. The trinocular head attachment works with both illumination modes. It also allows photography and binocular visual observation. The inclination of the eyepiece tubes is 30°. With the polarization head attachment, the instrument is suitable for the internal structure of materials and for condition monitoring of different mechanical apparatus in college and factory. The reflected light halogen illumination (20W), which goes through the objective onto the object, can be modified for special purposes with a colour filter wheel and the polarizer/analyzer combination. The Science ADL 601P is an instrument with an excellent value for money. It has also the other features, which are typical for high-quality microscopes: fourfold objective nosepiece, lengthwise and cross moveable stage, coaxial focusing knobs (concerning fine drive: 200 µm / full turn), adjustment of eye relief, diopter adjustment and the phototube. Optional available, general accessories are the wide field eyepieces (WF10x, WF16x), the dividing eyepiece (WF10x), different planachromatic DIN objectives (e.g. 4x, 5x, 10x, 20x, 40x retractable, 60x retractable, 100x-oil retractable), the Abbe condenser (numerical aperture 1,25; with iris diaphragm and auxiliary lens), dark field condensers (dry and oil), immersion oil and phase contrast set.  Features • Type: Biological microscope • View: Binocular • Application range: Biology, Gemology, Mineralogy, Botany • Illumination: Halogen • Level: Intermediate, Expert • Warranty: 2 years • 1.25 Abbe-condenser with iris diaphragm and filter holder • Incl. adjustable mechanical stage • Integr. dimmer • Adjustable eye relief • Diopter adjustment Specifications • Comfortable binocular view, 30° inclined • Transmitted 6V/20W, adjustable • Magnifications: 40x-600x • Eyepieces: 2x WF10x • Eyepiece diameter: 23.2 mm • Objectives: PL-5x, PLL-10x, PLL-40x, PLL-60x • Power supply: 220/240V Included Accessories • 4 DIN-objectives • 2x 10x eyepieces • 1.25 Abbe-condenser with iris diaphragm and filter holder • Polariser-/Analyser-Attachment • Additional Halogen-Incident-Illumination for Polarisation

This high-quality combination set, consisting of the professional Science Infinity Microscope, the powerful MikroCam PRO HDMI 5MP, and the matching 13.3" HDMI monitor, offers a complete solution for modern laboratory use and impressive presentations. It combines precise microscopy with crystal-clear live image transmission – ideal for research, teaching, and demonstrations.The Microscope in DetailThe NEW BRESSER Science Infinity microscope is the new flagship model of Bresser's biological microscope series. It features infinity-corrected planachromatic objectives with excellent image quality. Thanks to its contemporary optical design, it offers great flexibility when connecting accessories such as cameras.The WF 10x eyepieces have a large field of view of 22 mm and are also ideal for glasses wearers. For protection, the eyepieces are equipped with a rubberized surface. The interpupillary distance can be adjusted from approximately 55 mm to approximately 75 mm. A diopter adjustment is possible with both eyepieces.The powerful and durable LED illumination is adjustable and is also very suitable for contrast methods*.The Köhler illumination is adjustable with the built-in aperture diaphragm and the height-adjustable and centering Abbe condenser (numerical aperture 1.25; with iris diaphragm). The condenser also features a printout of the various magnifications, allowing for quick and precise adjustment of the iris diaphragm.The coaxial drives of the stage adjustment and the coarse and fine focusing enable ergonomic working.The trinocular port allows for the direct connection of a C-Mount camera or MikroCam.SCOPE OF DELIVERY MICROSCOPEMicroscope stand with integrated LED illuminationPlanachromatic, infinity-corrected objectives (4x, 10x, 40x, 100x oil)Two WF 10x eyepiecesImmersion oilDust coverPower supplyUser manual*With optional accessoriesThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality while being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera, providing brilliant and high-contrast images.For high-resolution micro photos, this camera features a high-quality Sony 5MP sensor, allowing images and videos to be saved on an SD card with higher resolution than Full HD.The operation of the camera functions is done via mouse directly on the screen menu. Through the screen menu, measurements can now also be performed, turning your microscope with the MikroCam Pro HDMI 5MP into a fully-fledged digital measuring microscope.Additionally, the camera can also provide the microscope view wirelessly via a WiFi module. However, a connection to the PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.The professional software MikroCamLabII is still included, allowing images to be edited and evaluated later with the software.Software for image evaluation included in the following languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseSimplified ChineseTraditional ChineseThe software features numerous functions for image processingMeasurement function (additional object micrometer required, e.g., Bresser article no. 5916720): lengths, angles, areas (polygons, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range)FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7, or i9 processor from the 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY MICROSCOPE CAMERAMikroCam Pro HDMI 5MP with C-Mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen provides brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen, allowing the microscope user to microscope as usual while simultaneously viewing the image on the monitor. The display provides optimal image quality with a large viewing angle of 178°! This way, multiple people can view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, preventing cable clutter at the workplace. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

This high-quality combination set, consisting of the professional Science Infinity Microscope, the powerful MikroCam PRO HDMI Autofocus, and the matching 13.3" HDMI monitor, offers a complete solution for modern laboratory use and impressive presentations. It combines precise microscopy with crystal-clear live image transmission – ideal for research, teaching, and demonstrations.The Microscope in DetailThe NEW BRESSER Science Infinity microscope is the new flagship model of Bresser's biological microscope series. It features infinity-corrected planachromatic objectives with excellent image quality. Thanks to the contemporary optical design, you have great flexibility when connecting accessories such as cameras.The WF 10x eyepieces have a large field of view of 22 mm and are also ideal for glasses wearers. For protection, the eyepieces are equipped with a rubberized surface. The interpupillary distance can be adjusted from approximately 55 mm to approximately 75 mm. A diopter adjustment is possible with both eyepieces.The strong and durable LED illumination is adjustable and is also very suitable for contrast methods*.The Köhler illumination is adjustable with the built-in aperture diaphragm and the height-adjustable and centering Abbe condenser (numerical aperture 1.25; with iris diaphragm). The condenser also features a printout of the various magnifications, allowing for quick and precise adjustment of the iris diaphragm.The coaxial drives of the stage adjustment and the coarse and fine focusing enable ergonomic working.The trinocular port allows for the direct connection of a C-Mount camera or MikroCam.SCOPE OF DELIVERY MICROSCOPEMicroscope stand with integrated LED illuminationPlanachromatic, infinity-corrected objectives (4x, 10x, 40x, 100x oil)Two WF 10x eyepiecesImmersion oilDust coverPower supplyUser manual*With optional accessoriesThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality while being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera, providing brilliant and high-contrast images. Due to its very high light sensitivity, good image quality is ensured even in low light. This model is especially recommended for dark field or phase contrast.The autofocus allows for optimal focusing of the camera without using the microscope's focusing wheels. This ensures parfocality on various trinocular microscopes. The focusable range extends from the 0 position, corresponding to the C-Mount distance, through a maximum forward focus of 5.4 mm, thus also reaching the CS-Mount distance, and additionally up to 10.6 mm inward to cover an even larger range. Besides autofocus, the camera can also be manually focused using a mouse. Focus adjustment to a specific area is also possible.The operation of the camera functions is done via mouse directly on the on-screen menu. Measurements can be performed through the on-screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully functional digital measuring microscope.The MikroCam PRO HDMI Autofocus offers a variety of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine visionThus, the MikroCam PRO Autofocus is excellently suited as an industrial camera with a very good price-performance ratio.Additionally, the camera can also provide the microscope view in a wireless network via a WiFi module. When connected via HDMI, images and videos can be recorded directly on an SD card (not included). However, a connection to a PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (*Object micrometer Art. No. 5916720 necessary for calibration)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-Mount distance) to 10.6 mm1/4" tripod thread, e.g., for a photo tripodC-Mount thread: for easy adaptability, also suitable for C-Mount objectivesSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7, or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY MICROSCOPE CAMERACamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image editing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual while simultaneously viewing the image on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, multiple people can view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, preventing cable clutter at the workplace. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included in the delivery.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

This high-quality combination set, consisting of the professional Science TRM-301 microscope, the powerful MikroCam PRO HDMI 5MP, and the matching 13.3" HDMI monitor, offers a complete solution for modern laboratory use and impressive presentations. It combines precise microscopy with crystal-clear live image transmission – ideal for research, teaching, and demonstrations.The Microscope in DetailThe BRESSER Science TRM-301 is a trinocular transmitted light microscope of top class: Excellent image reproduction, good ergonomics, high stability, and an appealing design characterize it. As a fully usable laboratory microscope, it finds wide applications in medicine, biology, agriculture, and industry. It is also highly recommended for the dedicated hobby microscopist as a ''microscope for life''.A particularly important feature of the TRM-301 is its ability for so-called Köhler illumination. Through this optimal specimen illumination, which is exceptionally bright, cool (specimen-friendly), uniform, glare-free, and high-contrast, the performance of the microscope optics is fully utilized. It therefore represents the standard in scientific work and microphotography. The Köhler illumination is adjustable with the fixed built-in field diaphragm and the height-adjustable and centering Abbe condenser (numerical aperture 1.25; with iris diaphragm).Of course, the TRM-301 also features the other typical equipment for high-quality microscopes: with a cross stage that moves both horizontally and vertically with Nonius scales, ergonomic coaxial focusing drives (the fine drive achieves 200 µm/revolution), stepless lamp dimmer, plan achromatic objectives (4x, 10x, 40x, 100x-oil spring), 10x wide field eyepieces (in 30° inclined eyepiece tubes), inter-pupillary distance and diopter adjustment, as well as a photo tube.FEATURES OF THE MICROSCOPETransmitted light microscopeType of head: TrinocularMagnification: 40x - 1000x2 eyepieces: both WF 10x (23mm)4 objectives: 4x, 10x, 40x, 100x oilType of objectives: Plan achromaticCondenser: Abbe N.A. 1.25Illumination: 12V/30W halogen with dimmerSCOPE OF DELIVERY OF THE MICROSCOPEMicroscope2x eyepiece4x objectivecoaxial cross stage with Nonius adjustmentImmersion oilDust coverPower supply 12V, 4AThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality while also being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images.For high-resolution micro photos, this camera features a high-quality Sony 5MP sensor, allowing images and videos to be saved on an SD card with higher resolution than Full HD.The operation of the camera functions is done via mouse directly on the screen menu. Through the screen menu, measurements can now also be performed, turning your microscope with the MikroCam Pro HDMI 5MP into a fully-fledged digital measuring microscope.Additionally, the camera can also provide the microscope view in a wireless network via WiFi module. However, a connection to the PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.The professional software MikroCamLabII is still included, allowing images to be edited and evaluated later with the software.Software for image evaluation included in the following languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseSimplified ChineseTraditional ChineseThe software features numerous functions for image processingMeasurement function (additional object micrometer required, e.g., Bresser article no. 5916720): lengths, angles, areas (polygons, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range)FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY OF THE MICROSCOPE CAMERAMikroCam Pro HDMI 5MP with C-Mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so that cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done with two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply requiredSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyOperating instructions

This high-quality combination set, consisting of the professional Science TRM-301 microscope, the powerful MikroCam PRO HDMI Autofocus, and the matching 13.3" HDMI monitor, offers a complete solution for modern laboratory use and impressive presentations. It combines precise microscopy with crystal-clear live image transmission – ideal for research, teaching, and demonstrations.The Microscope in DetailThe BRESSER Science TRM-301 is a trinocular transmitted light microscope of top class: Excellent image reproduction, good ergonomics, high stability, and an appealing design characterize it. As a fully usable laboratory microscope, it finds wide applications in medicine, biology, agriculture, and industry. It is also highly recommended for the dedicated hobby microscopist as a 'microscope for life'.A particularly important feature of the TRM-301 is its ability for so-called Köhler illumination. This optimal specimen illumination, which is exceptionally bright, cool (specimen-friendly), uniform, glare-free, and high-contrast, fully utilizes the performance of the microscope optics. It therefore represents the standard in scientific work and microphotography. The Köhler illumination is adjustable with the fixed built-in aperture diaphragm and the height-adjustable and centrable Abbe condenser (numerical aperture 1.25; with iris diaphragm).Of course, the TRM-301 also features the further typical equipment for high-quality microscopes: with a cross table that moves transversely and longitudinally with Nonius scales, ergonomic coaxial focusing drives (the fine drive achieves 200 µm/revolution), stepless lamp dimmer, plan achromatic objectives (4x, 10x, 40x, 100x-oil spring), 10x wide-field eyepieces (in 30° inclined eyepiece tubes), inter-pupillary distance and diopter adjustment, as well as a photo tube.FEATURES OF THE MICROSCOPETransmitted light microscopeHead type: TrinocularMagnification: 40x - 1000x2 eyepieces: both WF 10x (23mm)4 objectives: 4x, 10x, 40x, 100x oilObjective type: Plan achromaticCondenser: Abbe N.A. 1.25Illumination: 12V/30W halogen with dimmerSCOPE OF DELIVERY OF THE MICROSCOPEMicroscope2x eyepiece4x objectivecoaxial cross table with Nonius adjustmentImmersion oilDust coverPower supply 12V, 4AThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality while being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images. Due to its very high light sensitivity, good image quality is ensured even in low light. Thus, this model is especially recommended for dark field or phase contrast.The autofocus allows optimal focusing of the camera without using the microscope's focusing wheels. This ensures parfocality on various trinocular microscopes. The focusable range extends from the 0 position, corresponding to the C-Mount distance, over a maximum forward focusing of 5.4 mm, thus also reaching the CS-Mount distance and additionally up to 10.6 mm inward, to cover an even larger range. Besides autofocus, the camera can also be manually focused using a mouse. A focus adjustment to a specific area is also possible.The operation of the camera functions is done via mouse directly on the screen menu. Measurements can be performed via the screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully-fledged digital measuring microscope.The MikroCam PRO HDMI Autofocus offers a variety of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine visionThus, the MikroCam PRO Autofocus is excellently suited as an industrial camera with a very good price-performance ratio.Additionally, the camera can also provide the microscope view in a wireless network via a WiFi module. If the camera is connected via HDMI, images and videos can be recorded directly on an SD card (not included). However, a connection to the PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (*Object micrometer Art. No. 5916720 necessary for calibration)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-Mount distance) to 10.6 mm1/4" tripod thread, e.g., for a photo tripodC-Mount thread: for easy adaptability, also suitable for C-Mount objectivesSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY OF THE MICROSCOPE CAMERACamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. Thus, observation can be done independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so that cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyOperating instructions

Powerful combo set for precise observations and razor-sharp images. This high-quality set combines the professional ETD-201 stereo microscope, the modern MikroCam PRO HDMI 5MP microscope camera, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live presentations.The Microscope in DetailThe BRESSER Science ETD-201 is an optically high-quality reflected and transmitted light stereo magnifier. It is suitable for use in medicine, agriculture and forestry, forensics, scientific research institutes and schools, as well as for assembly and inspection of small components in precision mechanics and electronics. The particularly wide base with object table and the exceptionally large height adjustment range allow the observation of larger objects. The instrument features LED reflected and transmitted illumination, which can be used individually or combined and each continuously adjusted. The reflected light incidence angle is especially user-friendly adjustable and lockable. With interchangeable widefield eyepieces (WF10x) and a 6.25x stereo zoom objective (0.8x-5x), a continuous magnification range of 8x to 50x is realised. The click-stop zoom locks at predefined positions, so magnifications can be exactly reproduced, e.g., for measurements under the microscope. The eyepieces have a field number of 22, allowing a visible field of view between 4.5 and 27.5 mm. The eye distance and dioptre adjustment are individually adjustable. The trinocular microscope head can be rotated 360° and features two eyepiece tubes inclined at 45° as well as a separate, parfocally adjustable camera tube for connecting a C-Mount camera, or MikroCam, up to a 1/2" sensor size. MICROSCOPE SCOPE OF DELIVERYMicroscope zoom headMicroscope standWF 10x eyepieces (2 pieces)C-Mount camera adapterUSB power supply cableGlass object platePlastic object plate (black/white)Dust coverOperating instructionsThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality combined with user-friendly operation. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be mounted directly on the camera and provides brilliant and high-contrast images. For high-resolution microphotos, this camera features a high-quality Sony 5MP sensor, so images and videos can be saved on an SD card at resolutions higher than Full HD. The camera functions are operated via mouse directly on the on-screen menu. Measurements can now also be performed via the on-screen menu, turning your microscope with the MikroCam Pro HDMI 5MP into a fully functional digital measuring microscope. Additionally, the camera can provide the microscope view wirelessly via a WiFi module. However, connection to a PC via USB is no longer supported with this model. For this, we recommend the MikroCam Pro HDMI 5914180 model. The professional MikroCamLabII software is still included, allowing images to be edited and analysed afterwards. Image Analysis Software Included in the Following Languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseSimplified ChineseTraditional Chinese The software offers numerous image processing functionsMeasurement function (additional object micrometer required, e.g., Bresser article no. 5916720): distances, angles, areas (polygon, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range) MICROSCOPE CAMERA FEATURESHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (object micrometer Art. No. 5916720 required for calibration)Wide dynamic range function (WDR)Saving images and videos on SD card (not included) max. 32 GB SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0 MICROSCOPE CAMERA SCOPE OF DELIVERYMikroCam Pro HDMI 5MP with C-Mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMI The display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC. The display size is optimally chosen so that the microscope user can continue to use the microscope as usual and simultaneously view the image on the monitor. The display provides optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality. The microscope camera image is always displayed on the HDMI screen without delay and with a high refresh rate of 60 FPS. Display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is especially advantageous when working under microscopic control. Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture can be uncomfortable for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here. The display can be powered with the included Y-cable using the same power supply as the camera. A suitable short, angled HDMI cable is also included, so cable clutter at the workplace is avoided. Mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included. DISPLAY FEATURES 16:9 Full HD monitor with a resolution of 1920 x 1080 pixels Active area: 16.5 x 29.4 cm Easy mounting directly on a MikroCam PRO or MINI Wide viewing angle (178°) No separate power supply required SCOPE OF DELIVERY 13.3" display HDMI cable Y-cable for power supply via camera power supply Mounting screws (2 pieces) Allen key Operating instructions

Powerful combo set for precise observations and sharp images. This high-quality set combines the professional Advance ICD stereo microscope, the modern MikroCam PRO HDMI autofocus microscope camera, a 0.5x reduction lens, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live presentations.The Microscope in DetailThe BRESSER Advance ICD is suitable as a zoom stereo loupe for a wide range of observations. Objects appear three-dimensional and plastic due to the Greenough design with two inclined objectives. The 3D image also makes working with tools (e.g. preparing, dissecting, soldering) much easier.The zoom allows stepless adjustment of magnification with a zoom factor of 4.0 (1x-4x). Only minimal refocusing is needed when zooming. For this, the Advance ICD has a coaxial focus drive with coarse and fine adjustment. This allows particularly sensitive focusing at high magnifications or for photography. The fine focus is also a great aid for focus stacking, e.g. with our MikroCam cameras (optional).The interpupillary distance is individually adjustable. Both eyepiece holders have a dioptre adjustment, allowing differences in visual acuity of up to approx. 8 dpt between the left and right eye to be compensated. The 10x widefield eyepieces with a field number of 22 are equipped with removable rubber eyecups. The microscope head can be adjusted very far in height on the stand rod. This allows very large objects up to an object height of approx. 22 cm to be observed.The bright LED incident light illumination is adjustable in its inclination. The particularly even and bright LED transmitted light illumination provides a homogeneous background for transmitted light specimens. The illumination can be set with a toggle switch, so incident and transmitted light can be used separately or together depending on the type of sample. You can conveniently adjust the brightness with the dimmer. The bright LED illumination produces no heat, so living samples can be safely observed over a longer period. A low-power 5V power adapter (with Euro and UK adapter) is used to power the long-lasting LED illumination. The power cable has a USB connector on one side.The Advance ICD can be used in many ways due to the large magnification range. In addition to the included 2x auxiliary lens, further additional objectives are available, allowing you to vary and adapt the magnification range, working distance, and depth of field even further to your requirements.These magnifications are possible in the basic configuration:10x eyepieces: 10x - 40x10x eyepieces plus 2x auxiliary lens: 20x - 80x20x eyepieces: 20x - 80x20x eyepieces plus 2x auxiliary lens: 80x - 160x(further magnifications possible with optional additional objectives or eyepiece magnifications)The third tube is designed for connecting a camera. A switch deflects the image of the left objective to the camera tube. Various adapters and reduction optics are available for C-mount cameras and DSLR or system cameras, so practically all cameras with removable lenses can be connected.APPLICATION AREASQuality control in industryMaterial testingLaboratoryBotany, horticulture, agricultureHydrology, aquaculture, aquaristics, marine biologyInsects, entomology, pest controlPlant physiology, raw materials, medicinal drugsSchool, teachingMICROSCOPE FEATURESTrinocular microscope head for visual observation and camera use with switchCompatible, among others, with BRESSER MikroCams (optional)1x-4x stereo zoom objective2x auxiliary lens (doubles magnification through eyepieces and zoom objective)Dioptre compensation in both eyepiece holdersAdjustable interpupillary distance (52 - 72 mm)Bright LED illumination (incident/transmitted light)2 different object plates for optimal contrast to the objectObservation of three-dimensional objects up to approx. 22 cm height possiblePower adapter Euro/UK (5V / 1,000 mA) with USB connectionRobust design with heavy base2 pairs of widefield eyepieces includedMICROSCOPE SCOPE OF DELIVERYMicroscope2 pairs of widefield eyepieces (WF 10x / WF 20x)2x auxiliary lens (1 piece)1 pair of rubber eyecupsPlastic object plate 94 mm (black/white)Glass object plate 94 mm (matte)Power adapter Euro/UK (5V / 1,000 mA)Dust coverOperating instructionsThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality combined with user-friendly operation. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (Art. No. 5914110) can be mounted directly on the camera and delivers brilliant and high-contrast images. Due to the very high light sensitivity, good image quality is ensured even in low light. This model is therefore particularly recommended for darkfield or phase contrast.The autofocus allows optimal focusing of the camera without using the microscope's focus wheels. This ensures parfocality on various trinocular microscopes. The focusable range extends from position 0, which corresponds to the C-mount distance, to a maximum focus of 5.4 mm forward, which also reaches the CS-mount distance, and additionally up to 10.6 mm inward to cover an even larger range. Besides autofocus, the camera can also be manually focused via mouse. Focus adjustment to a specific area is also possible.The camera functions are operated via mouse directly on the on-screen menu. Measurements can be performed via the on-screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully functional digital measuring microscope.The MikroCam PRO HDMI Autofocus offers a wide range of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine visionThis makes the MikroCam PRO Autofocus an excellent industrial camera with a very good price-performance ratio.Additionally, the camera can provide the microscope view in a wireless network via a WiFi module. When connected via HDMI, images and videos can be recorded directly on an SD card (not included). A USB connection to the PC is not provided for this model. For this, we recommend the MikroCam Pro HDMI 5914180 model.MICROSCOPE CAMERA FEATURESHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (*object micrometer Art. No. 5916720 required for calibration)Wide dynamic range function (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-mount distance) to 10.6 mm1/4" tripod thread, e.g. for a photo tripodC-mount thread: for easy adaptability, also suitable for C-mount objectivesSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and simultaneously view the image on the monitor. The display delivers optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. Displaying via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when working under microscopic control.Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included to avoid cable clutter at the workplace. Mounting on a MikroCam PRO or MINI is done with two screws. Screws and tools are included.DISPLAY FEATURES16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINIWide viewing angle (178°)No separate power supply necessarySCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Allen keyOperating instructions

Professional complete set for precise analyses and high-resolution image transmission: This powerful set combines the high-quality Science ETD-201 stereo microscope with the modern MikroCamII 12MP camera. It is ideal for fine detail observations, sharp live images, and reliable documentation of your results.The Microscope in DetailThe BRESSER Science ETD-201 is an optically high-quality reflected and transmitted light stereo microscope. It is suitable for use in medicine, agriculture and forestry, forensics, scientific research institutes and schools as well as for assembly and inspection of small components in precision mechanics and electronics. The particularly wide base with object table and the exceptionally large height adjustment range allow the observation of larger objects. The instrument features LED reflected and transmitted illumination, which can be used individually or combined and each dimmed steplessly. The reflected light incidence angle is particularly user-friendly adjustable and lockable. With interchangeable widefield eyepieces (WF10x) and a 6.25x stereo zoom objective (0.8x-5x), a continuous magnification range of 8x to 50x is realised. The click-stop zoom locks at predefined positions, so that magnifications can be exactly reproduced, e.g. for measurements on the microscope. The eyepieces have a field number of 22, allowing a visible field of view between 4.5 and 27.5 mm. The eye distance and dioptre adjustment are individually adjustable. The trinocular microscope head can be rotated 360° and has two eyepiece tubes inclined at 45° as well as a separate, parfocally adjustable camera tube for connecting a C-Mount camera, or MikroCam, up to a 1/2" sensor size. MICROSCOPE SCOPE OF DELIVERYMicroscope zoom headMicroscope standWF 10x eyepieces (2 pieces)C-Mount camera adapterUSB power supply cableGlass object platePlastic object plate (black/white)Dust coverOperating instructionsThe Microscope Camera in DetailThe BRESSER MikroCam II cameras enable easy capturing of photos and videos with a microscope. The modern Sony® CMOS sensors deliver brilliant colours with overall very low image noise and are therefore the perfect solution for applications where natural colour reproduction is important. The included capture software offers numerous settings for capturing single images and videos. An integrated measurement function* allows measurement already in the live image. The included software supports the following languages: German, English, French, Polish, Turkish, Chinese. The housing features a C-Mount connection thread. For use on devices with 23.2mm mount, an optional variable reduction optic 0.5x (Art. No. 5914005) is available. For special applications, the camera can also be mounted on the integrated 1/4'' tripod thread. Compared to the MikroCam SP, the BRESSER MikroCamII is equipped with a USB 3.0 connection. This allows up to 8 times higher data rates than USB 2.0 connections. The cameras are thus capable of transmitting more than 25 frames per second (depending on resolution, exposure time and computer performance). This is especially important for living microorganisms. The camera is exceptionally light-sensitive, allowing short exposure times even at high magnifications or demanding contrast methods. MICROSCOPE CAMERA FEATURESHigh-quality metal housingMany software functions, such as measurement, focus stacking (overlaying multiple shots for increased depth of field), mosaic (to display larger image fields)Image and video recording, including time-lapse functionGood compatibility with various microscopesHigh-speed USB 3.0 connectionModern Sony® IMX226 sensor 7.53mm x 5.64mm (1/1.7'') SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 3.0, 3.1 MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headUSB 3.0 cable23.2 mm adapter, 30 mm and 30.5 mmCapture and image processing software (for Windows)

Professional complete set for precise analyses and high-resolution image results: This powerful set combines the high-quality Advance ICD stereo microscope with the modern MikroCamII 12 MP camera and a 0.5x reduction lens. It is ideal for fine detail observations and high-resolution images, ensuring reliable documentation of your results.The microscope in detailThe BRESSER Advance ICD is suitable as a zoom stereo loupe for various observations. Objects appear three-dimensional and plastic due to the Greenough design with two inclined objectives. The 3D image also makes working with tools (e.g. preparing, dissecting, soldering) much easier.The zoom allows stepless adjustment of magnification with a zoom factor of 4.0 (1x-4x). Only minimal refocusing is needed when zooming. For this, the Advance ICD has a coaxial focusing drive with coarse and fine adjustment. This allows particularly sensitive focusing at high magnifications or for photography. The fine focus is also a great aid for focus stacking, e.g. with our MikroCam cameras (optional).The interpupillary distance is individually adjustable. Both eyepiece holders have a dioptre adjustment, allowing differences in visual acuity of up to approx. 8 dpt between the left and right eye to be compensated. The 10x widefield eyepieces with a field number of 22 are equipped with removable rubber eyecups. The microscope head can be adjusted very far in height on the stand rod. This allows observation of very large objects up to an object height of approx. 22 cm.The bright LED incident illumination is adjustable in inclination. The particularly even and bright LED transmitted illumination provides a homogeneous background for transmitted light specimens. The illumination can be set with a toggle switch, so incident and transmitted light can be used separately or together depending on the type of sample. You can conveniently adjust the brightness with the dimmer. The bright LED illumination produces no heat, so living samples can be safely observed over a longer period. A low-power 5V power adapter (with Euro and UK adapter) is used to power the long-lasting LED illumination. The power cable has a USB connection on one side.The Advance ICD can be used in many ways due to the large magnification range. In addition to the included 2x auxiliary lens, further additional objectives are available, allowing you to vary and adapt the magnification range, working distance, and depth of field even further to your requirements. These magnifications are possible in the basic configuration:10x eyepieces: 10x - 40x10x eyepieces plus 2x auxiliary lens: 20x - 80x20x eyepieces: 20x - 80x20x eyepieces plus 2x auxiliary lens: 80x - 160x(further magnifications possible with optional additional objectives or eyepiece magnifications)The third tube is designed for connecting a camera. A switch diverts the image from the left objective to the camera tube. Various adapters and reduction optics are available for C-mount cameras and DSLR or system cameras, so practically all cameras with removable lenses can be connected. APPLICATION AREASQuality control in industryMaterial testingLaboratoryBotany, horticulture, agricultureHydrology, aquaculture, aquaristics, marine biologyInsects, entomology, pest controlPlant physiology, raw materials, medicinal drugsSchool, teaching MICROSCOPE FEATURESTrinocular microscope head for visual observation and camera use with switchCompatible, among others, with BRESSER MikroCams (optional)1x-4x stereo zoom objective2x auxiliary lens (doubles magnification through eyepieces and zoom objective)Dioptre compensation in both eyepiece holdersAdjustable interpupillary distance (52 - 72 mm)Bright LED illumination (incident/transmitted light)2 different object plates for optimal contrast to the objectObservation of three-dimensional objects up to approx. 22 cm height possiblePower adapter Euro/UK (5V / 1,000 mA) with USB connectionRobust design with heavy base2 pairs of widefield eyepieces includedMICROSCOPE SCOPE OF DELIVERYMicroscope2 pairs of widefield eyepieces (WF 10x / WF 20x)2x auxiliary lens (1 piece)1 pair of rubber eyecupsPlastic object plate 94 mm (black/white)Glass object plate 94 mm (matte)Power adapter Euro/UK (5V / 1,000 mA)Dust coverOperating instructionsThe microscope camera in detailThe BRESSER MikroCam II cameras enable easy photo and video recording with a microscope. The modern Sony® CMOS sensors deliver brilliant colours with overall very low image noise and are thus the perfect solution for applications where natural colour reproduction is important. The included recording software offers numerous settings for capturing single images and videos. An integrated measurement function* allows measurement already in the live image. The included software supports the following languages: German, English, French, Polish, Turkish, Chinese. The housing has a C-mount connection thread. For use on devices with 23.2 mm mount, an optional variable 0.5x reduction optic (Art. No. 5914005) is available. For special applications, the camera can also be mounted on the integrated 1/4'' tripod thread. The BRESSER MikroCamII are equipped with a USB 3.0 connection compared to the MikroCam SP. This allows up to 8x higher data rates than USB 2.0 connections. The cameras can thus transmit more than 25 frames per second (depending on resolution, exposure time, and computer performance). This is especially important for living microorganisms. The camera is exceptionally light-sensitive, so short exposure times can be used even at high magnifications or demanding contrast methods. MICROSCOPE CAMERA FEATURESHigh-quality metal housingMany software functions, such as measurement, focus stacking (overlaying multiple images for increased depth of field), mosaic (to display larger image fields)Image and video recording, including time-lapse functionGood compatibility with various microscopesHigh-speed USB 3.0 connectionModern Sony® IMX226 sensor 7.53 mm x 5.64 mm (1/1.7'') SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 3.0, 3.1 MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headUSB 3.0 cable23.2 mm adapter, 30 mm and 30.5 mmRecording and image processing software (for Windows)

The BRESSER Science ETD-301 is a stereo incident light and transmitted light microscope with high-quality optics.It is suitable for use in medicine, agriculture, forestry, forensics, scientific research institutes and schools as well as for the assembly and inspection of small components in precision mechanics and electronics.The particularly wide base with object table enables the viewing of larger objects. The maximum object height is approx. 85 mm. The large working distance of 100 mm allows working with tools, e.g. for dissecting, measuring or testing.The instrument has an LED incident light and a transmitted light illumination, which can be used individually or combined and each can be infinitely adjusted. The incident light angle can be adjusted in a particularly user-friendly way. With interchangeable wide-field eyepieces (WF10x) and a 9x stereo zoom lens (0.7x-6.3x), a continuous magnification range from 7x to 63x is realised.The coarse and fine focusing allows precise focusing, especially at high magnifications and in photography.The interpupillary distance and dioptric compensation are individually adjustable. The trinocular microscope head can be rotated 360° and has two 45° inclined eyepiece tubes.The trinocular tube can carry an SLR/system camera (APS-C or DX format) or a c-mount camera (sensor size up to 1") using an optional adapter. By means of a switch, the beam path of one eyepiece is deflected towards the camera. This provides 50% more light than a microscope with a permanent beam splitter.To connect an SLR or system camera, the adapter with item no. 5942100 and a camera-specific T2 ring are required.A c-mount camera is connected with the optional adapter item no. 5942101. FEATURESWF 10x eyepieces with 22 mm field of view (referring to a 1x objective)Large, continuous 9x zoom (7x - 63x magnification)With optional adapter suitable for SLR/system cameras and c-mount camerasTripod with coarse and fine focusSCOPE OF DELIVERYMicroscope zoom headLED microscope standWF 10x eyepieces with 22mm field of view (2 pieces)Translucent plastic object plateAC adapter (12V 3A)dust cover

The New BRESSER Science Infinity is the new top of the range of the biology microscope series by BRESSER. It is based on infinitely corrected planachromatic objective lenses with superb image quality. Because of the modern design and optics the installation of accessories is very simple and one has many options. The WF 10x eyepieces offer a large visual field of 22mm and are also suitable for spectacle wearers. For protection purposes the eyepieces are rubber coated. The interpupillary distance can be adjusted from ca. 55mm to 75mm. Dioptre adjustments are possible with both eyepieces.The bright and durable LED illumination is dimmable and also very practical for darkfield microscopy*.The Full Köhler illumination is adjustable with the built-in luminous-field diaphragm and the vertically and horizontally adjustable Abbe condenser (numerical aperture 1.25, with iris diaphragm). An imprint of the different possible magnifications on the condenser makes the adjustment of the iris diaphragm very fast and precise.Coaxial pinions drive the stage and focus which enables ergonomic operation of the microscope.The trinocular tube enables the direct attachment of a c-mount camera or MikroCam.SCOPE OF DELIVERYMicroscope with integrated LED illuminationplanachromatic objectives, infinity corrected (4x, 10x, 40x, 100x oil)2x eyepieces (WF 10x)Mains adapterManualImmersion oilDust cover*only with optional accessories

Powerful combo set for precise observations and razor-sharp images. This high-quality set combines the professional EDT-201 stereo microscope, the modern MikroCam PRO HDMI Autofocus microscope camera, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live presentations.The Microscope in DetailThe BRESSER Science ETD-201 is an optically high-quality incident and transmitted light stereo microscope. It is suitable for use in medicine, agriculture and forestry, forensics, scientific research institutes and schools, as well as for assembly and inspection of small components in precision mechanics and electronics. The particularly wide base with object table and the exceptionally large height adjustment range allow the observation of larger objects. The instrument features LED incident and transmitted light illumination, which can be used individually or combined and each continuously dimmed. The incident light angle is particularly user-friendly adjustable and lockable. With interchangeable widefield eyepieces (WF10x) and a 6.25x stereo zoom objective (0.8x-5x), a continuous magnification range of 8x to 50x is realised. The click-stop zoom locks at predefined positions, so magnifications can be exactly reproduced, for example, for measurements under the microscope. The eyepieces have a field number of 22, allowing a visible field of view between 4.5 and 27.5 mm. The eye distance and dioptre adjustment are individually adjustable. The trinocular microscope head can be rotated 360° and features two eyepiece tubes inclined at 45° as well as a separate, parfocally adjustable camera tube for connecting a C-Mount camera,  or MikroCam, up to a 1/2" sensor size. MICROSCOPE SCOPE OF DELIVERYMicroscope zoom headMicroscope standWF 10x eyepieces (2 pieces)C-Mount camera adapterUSB power supply cableGlass object platePlastic object plate (black/white)Dust coverOperating instructionsThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality combined with user-friendly operation. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (Art. No. 5914110) can be mounted directly on the camera and provides brilliant and high-contrast images. Due to its very high light sensitivity, good image quality is ensured even in low light. This model is especially recommended for darkfield or phase contrast. The autofocus allows optimal focusing of the camera without using the microscope's focus wheels. This ensures parfocality on various trinocular microscopes. The focussable range extends from position 0, which corresponds to the C-Mount distance, over a focus of max. 5.4 mm forward, thus also reaching the CS-Mount distance, and additionally up to 10.6 mm inward to cover an even larger range. Besides autofocus, the camera can also be manually focused via mouse. Focus adjustment to a specific area is also possible. The camera functions are operated via mouse directly on the on-screen menu. Measurements can be performed via the on-screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully functional digital measuring microscope. The MikroCam PRO HDMI Autofocus offers a wide range of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine vision This makes the MikroCam PRO Autofocus an excellent industrial camera with a very good price-performance ratio. Additionally, the camera can provide the microscope view in a wireless network via a WiFi module. When connected via HDMI, images and videos can be recorded directly on an SD card (not included). A USB connection to a PC is not provided for this model. For this, we recommend the MikroCam Pro HDMI 5914180 model. MICROSCOPE CAMERA FEATURESHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (*object micrometer Art. No. 5916720 required for calibration)Wide dynamic range function (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-Mount distance) to 10.6 mm1/4" tripod thread, e.g. for a photo tripodC-Mount thread: for easy adaptability, also suitable for C-Mount objectives SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0 MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMI The display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC. The size of the display is optimally chosen so that the microscope user can microscope as usual and simultaneously view the image on the monitor. The display provides optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality. The microscope camera image is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. Displaying via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when working under microscopic control. Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here. The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included to avoid cable clutter at the workplace. Mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included. DISPLAY FEATURES 16:9 Full HD monitor with a resolution of 1920 x 1080 pixels Active area: 16.5 x 29.4 cm Easy mounting directly on a MikroCam PRO or MINI Wide viewing angle (178°) No separate power supply necessary SCOPE OF DELIVERY 13.3" display HDMI cable Y-cable for power supply via camera power supply Mounting screws (2 pieces) Allen key Operating instructions