Appropriate microscopes for...

The Nexcope NIB900 is a high-quality research microscope that already integrates two contrast methods: phase contrast and fluorescence. This means it leaves nothing to be desired for life science and cell culture research. You can observe your samples either on a standard slide, in cell culture plates (Terasaki standard) or in a Petri dish. High-quality optical equipment 10x N-iPLEN PH Plan S-APO objective, NA 0.30, 1.2 mm 20x N-iPLEN PH Plan S-APO objective, NA 0.45, with correction ring for vessel base 0-2 mm 40x N-iPLEN PH Plan S-APO objective, NA 0.60, with correction ring for vessel base 0-2 mm WF 10x FN 22 eyepieces for spectacle wearers, integrated dioptre adjustment +/- 4 dpt Illumination and contrast methods The bright LED illumination for transmitted light / brightfield and phase contrast delivers high-contrast, high-resolution images in combination with the S-Apo objectives and the high numerical aperture. Adjusting the phase contrast is very easy with the integrated Bertrand lens: you no longer need a separate centring telescope and can check the alignment at the touch of a button. Special applications often require working with fluorescence. With the integrated LED fluorescence illumination, you can choose from 3 wavelengths (GBU) for fluorescence excitation. The illumination is conveniently controlled and adjusted via a separate control panel. The display is clear and easy to read. In addition, the intensity and the illuminated field can be adjusted using several sliders. This protects your cell culture from unnecessary radiation and ensures you always work with optimal settings. The microscope is prepared for use with 3D Emboss contrast. The Köhler illumination unit features a condenser with a high numerical aperture of 0.55, putting it far ahead of other inverted microscopes. The working distance is generously dimensioned at 26 mm. For easy handling and sample changing, the illumination unit can be folded away. The phase contrast unit is integrated. Mechanics The microscope features a large stage with an adjustment range of 130x85 mm. Various inserts for Petri dishes, Terasaki plates etc. are available. The focusing drive is coaxial on both sides and moves the stage by 9 mm. One full turn of the coarse focus moves the sample by 2 mm; one full turn of the fine focus moves it by 0.2 mm. Ergonomic design The NIB900 features numerous functions that make ergonomic working possible. The most important controls are positioned close together and are easy to reach. The mechanical stage drive is positioned low and, thanks to the universal joint, can also be operated at a slight angle, enabling a comfortable hand position. The eyepiece distance for spectacle wearers can be adjusted between 48 and 75 mm, and +/- 8 dpt can be compensated for, as both eyepieces are equipped with correction. Below the viewing port, the most important status indicators can be read on a display, where the brightness of the transmitted light is also adjusted. Scope of delivery: Inverted microscope incl. 3 Plan SApo objectives Pair of WF 10x eyepieces Condenser NA 0.55 incl. phase contrast unit UV protection screen, handles (2) Control panel for LED fluorescence 12V 1.5A power supply unit (microscope) 5V 6A power supply unit (fluorescence illumination) Sliders / diaphragms for transmitted light illumination (4) Device comes in two boxes: 56x56x51 cm 28 kg 62x57x47 cm 16 kg Device dimensions: 87x40x67.5 cm, total 38 kg

This incident/transmitted light microscope is the ideal choice for entering the world of microscopy. Exclusive accessories such as dissecting instruments, transport case and an electronic eyepiece are already included. With a magnification of 40x-1024x, it is also suitable for school or hobby use.  FEATURESBeginner's microscopeIncident and transmitted lightMagnification: 40-1024xUSB eyepiece: resolution 640x480 pixelsTransport case SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYMicroscopeObjectives: 4x, 10x, 40xEyepieces: 10x, 16x1.6x barlow lensColor filter wheel with aperturesMicroscope utensils (tweezers, pipette)5 Slides, 20 cover glasses5 PreparationsYeast, sea salt, Brine shrimp eggs, Gum media, Hatchery, MicrocutUSB eyepiece with softwareDust coverTransport caseInstruction manual

The BRESSER TRM-301 is a trinocular biological microscope of first-class quality: This means excellent imaging, good ergonomy, high stability and a modern attractive design. It is a laboratory microscope, which permits an intensive use, e.g. in medicine, biology, agriculture and industry area. Also, we can recommend it to the engaged hobbyist as his "microscope for a lifetime". A particular important feature of the TRM-301 is its ability for the Köhler illumination. This optimal illumination is bright, cool (going easy on the object), homogenous, reflex free and rich in contrast, so it makes the full use of the microscope optics. The Köhler illumination is standard for scientific research and microphotography. It is achieved with the fixed field diaphragm and the adjustable Abbe condenser (numerical aperture 1.25; with iris diaphragm). Naturally, the TRM-301 has the other features, which are typical for high-quality microscopes: lengthwise and cross moveable stage, ergonomic coaxial focusing knobs (fine focus: 200 µm / full turn), continous dimmer, planachromatic objectives (4x, 10x, 40x, 100x-oil retractable), 10x wide field eyepieces (mounted in 30° inclined eyepiece tubes), adjustment of eye relief, diopter adjustment and the phototube. FEATURESbiological microscopetype head: trinocularmagnification: 40x - 1000x2 eyepieces: both WF 10x (23mm)4 objectives: 4x, 10x, 40x, 100x oiltype objectives: planachromaticcondensor: Abbe N.A. 1.25illumination: 12V / 30W halogen with dimmerSCOPE OF DELIVERYMicroscope2x Eyepiece (WF 10x)4x Objective ( PL4x, PL10x, PL40x, PL100x oil)Coxial mechanical stage with Nonius scaleimmersion oildust coverpower cable

In the microscope's basis, there are a transmitted light halogen illuminator (20 W) as well as the power supply and the continuous adjustable dimmers for reflected light and transmitted light. The trinocular head attachment works with both illumination modes. It also allows photography and binocular visual observation. The inclination of the eyepiece tubes is 30°. With the polarization head attachment, the instrument is suitable for the internal structure of materials and for condition monitoring of different mechanical apparatus in college and factory. The reflected light halogen illumination (20W), which goes through the objective onto the object, can be modified for special purposes with a colour filter wheel and the polarizer/analyzer combination. The Science ADL 601P is an instrument with an excellent value for money. It has also the other features, which are typical for high-quality microscopes: fourfold objective nosepiece, lengthwise and cross moveable stage, coaxial focusing knobs (concerning fine drive: 200 µm / full turn), adjustment of eye relief, diopter adjustment and the phototube. Optional available, general accessories are the wide field eyepieces (WF10x, WF16x), the dividing eyepiece (WF10x), different planachromatic DIN objectives (e.g. 4x, 5x, 10x, 20x, 40x retractable, 60x retractable, 100x-oil retractable), the Abbe condenser (numerical aperture 1,25; with iris diaphragm and auxiliary lens), dark field condensers (dry and oil), immersion oil and phase contrast set.  Features • Type: Biological microscope • View: Binocular • Application range: Biology, Gemology, Mineralogy, Botany • Illumination: Halogen • Level: Intermediate, Expert • Warranty: 2 years • 1.25 Abbe-condenser with iris diaphragm and filter holder • Incl. adjustable mechanical stage • Integr. dimmer • Adjustable eye relief • Diopter adjustment Specifications • Comfortable binocular view, 30° inclined • Transmitted 6V/20W, adjustable • Magnifications: 40x-600x • Eyepieces: 2x WF10x • Eyepiece diameter: 23.2 mm • Objectives: PL-5x, PLL-10x, PLL-40x, PLL-60x • Power supply: 220/240V Included Accessories • 4 DIN-objectives • 2x 10x eyepieces • 1.25 Abbe-condenser with iris diaphragm and filter holder • Polariser-/Analyser-Attachment • Additional Halogen-Incident-Illumination for Polarisation

Powerful combination set for precise observations and sharp representations. This high-quality set combines the professional digital microscope DST-0745, the modern microscope camera MikroCam PRO HDMI 5MP, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live displays.The microscope in detailThe BRESSER DST-0745 is a special microscope that operates with a C-Mount camera (not included).Thus, direct viewing on a screen is possible. Due to the vertically mounted optics, there is no image shift when focusing. This is especially advantageous for "focus stacking" shots.The zoom is continuously adjustable from 0.7x to 4.5x. A coarse and fine focus makes focusing easier, especially at high magnifications.Due to the convenient and user-friendly operation, the digital microscope is particularly suitable for daily use in the workshop. Measurements, quality controls of surfaces, or checking components and raw materials become easy with the workshop microscope. Insects, plants, and rocks are also impressively displayed.The DST-0745 workshop microscope is not suitable for visual observation, as it is only a zoom lens. It is used in conjunction with a MikroCam C-Mount.It is designed for camera sensors of about 1/2".With the two flexible incident light lamps, the light can be optimally positioned.The transmitted light illumination helps in observing transparent objects. The brightness of both illuminations can be adjusted in five levels.The magnification of a USB camera differs from the objective magnification. Therefore, a total magnification of the digital system cannot be specified. It depends on the sensor size and the display on a monitor.Compatible MikroCam cameras:5914122 MikroCam SF Full HD5914321 MikroCam SP 3.1 MP5914520 MikroCam SP 5.0 MP5914522 MikroCam SF 5.0 MP5914822 MikroCam SF UHD5914912 MikroCamII 12MP USB 3.05914170 MikroCam MINI Full HD HDMI5914185 MikroCam PRO HDMI 5MP5914190 MikroCam Pro HDMI AutofocusFEATURES OF THE MICROSCOPEDesigned for C-Mount microscope camerasUp to 1/2" sensor size is suitableMax. object height: 190 mmContinuously adjustable zoom (0.7x - 4.5x)Two flexible incident light LED lampsLED transmitted light illuminationAdjustable brightnessSCOPE OF DELIVERY OF THE MICROSCOPEZoom objective head 0.7x - 4.5xStand with incident and transmitted light illuminationGlass object plate (one side frosted)Plastic object plate (one side white, one side black)Power supply, user manual, dust coverThe microscope camera in detailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality while also being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images.For high-resolution micro photos, this camera features a high-quality Sony 5MP sensor, allowing images and videos to be saved on an SD card with higher resolution than Full HD.The operation of the camera functions is done via mouse directly on the screen menu. Through the screen menu, measurements can also be performed, making your microscope with the MikroCam Pro HDMI 5MP a fully functional digital measuring microscope.Additionally, the camera can also provide the microscope view in a wireless network via WiFi module. However, a connection to the PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.The professional software MikroCamLabII is still included, allowing images to be edited and evaluated later with the software.Software for image evaluation included in the following languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseSimplified ChineseTraditional ChineseThe software features numerous functions for image processingMeasurement function (additional object micrometer required, e.g., Bresser article no. 5916720): lengths, angles, areas (polygons, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range)FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY OF THE MICROSCOPE CAMERAMikroCam Pro HDMI 5MP with C-Mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)The display in detailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen provides brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems like floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so that cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done with two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

Powerful combination set for precise observations and sharp representations. This high-quality set combines the professional digital microscope DST-0745, the modern microscope camera MikroCam PRO HDMI Autofocus, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live displays.The Microscope in DetailThe BRESSER DST-0745 is a special microscope that operates with a C-Mount camera (not included).Thus, direct viewing on a screen is possible. Due to the vertically mounted optics, there is no image shift when focusing. This is especially advantageous for "focus stacking" shots.The zoom is continuously adjustable from 0.7x to 4.5x. A coarse and fine focus makes it easier to sharpen, especially at high magnifications.Due to the convenient and user-friendly operation, the digital microscope is particularly suitable for daily use in the workshop. Measurements, quality controls of surfaces, or checking components and raw materials become easy with the workshop microscope. Insects, plants, and rocks are also impressively displayed.The DST-0745 workshop microscope is not suitable for visual observation, as it is only a zoom lens. It is used in conjunction with a MikroCam C-Mount.It is designed for camera sensors of about 1/2".With the two flexible incident light lamps, the light can be optimally positioned.The transmitted light illumination helps in observing transparent objects. The brightness of both illuminations can be adjusted in five levels.The magnification of a USB camera differs from the lens magnification. Therefore, a total magnification of the digital system cannot be specified. It depends on the sensor size and the display on a monitor.Compatible MikroCam cameras:5914122 MikroCam SF Full HD5914321 MikroCam SP 3.1 MP5914520 MikroCam SP 5.0 MP5914522 MikroCam SF 5.0 MP5914822 MikroCam SF UHD5914912 MikroCamII 12MP USB 3.05914170 MikroCam MINI Full HD HDMI5914185 MikroCam PRO HDMI 5MP5914190 MikroCam Pro HDMI AutofocusFEATURES OF THE MICROSCOPEDesigned for C-Mount microscope camerasUp to 1/2" sensor size is suitableMax. object height: 190 mmContinuously adjustable zoom (0.7x - 4.5x)Two flexible incident light LED lampsLED transmitted light illuminationAdjustable brightnessSCOPE OF DELIVERY OF THE MICROSCOPEZoom lens head 0.7x - 4.5xStand with incident and transmitted light illuminationGlass object plate (one side frosted)Plastic object plate (one side white, one side black)Power supply, user manual, dust coverThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality while being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images. Due to its very high light sensitivity, good image quality is ensured even in low light. Thus, this model is especially recommended for dark field or phase contrast.The autofocus allows optimal focusing of the camera without using the focusing wheels of the microscope. This ensures parfocality on various trinocular microscopes. The focusable range extends from the 0 position, which corresponds to the C-Mount distance, over a maximum focus of 5.4 mm forward, thus also reaching the CS-Mount distance and additionally up to 10.6 mm inward to cover an even larger area. In addition to autofocus, the camera can also be manually focused using a mouse. A focus adjustment to a specific area is also possible.The operation of the camera functions is done via mouse directly on the screen menu. Measurements can be performed via the screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully-fledged digital measuring microscope.The MikroCam PRO HDMI Autofocus offers a variety of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine visionThus, the MikroCam PRO Autofocus is excellent as an industrial camera with a very good price-performance ratio.Additionally, the camera can also provide the microscope view in a wireless network via WiFi module. If the camera is connected via HDMI, images and videos can be recorded directly on an SD card (not included). However, a connection to the PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (*Object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-Mount distance) to 10.6 mm1/4" tripod thread, e.g. for a photo tripodC-Mount thread: for easy adaptability, also suitable for C-Mount lensesSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY OF THE MICROSCOPE CAMERACamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. Thus, observation can be done independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

The well-designed combo set with the professional Science MTL-201 microscope and the high-resolution MikroCam PRO HDMI autofocus, together with the 13.3" monitor, offers a powerful complete solution for precise metallurgical examinations and diverse laboratory applications. The direct image transmission to the monitor enables comfortable live observation, vivid presentations, and efficient documentation - ideal for research and quality assurance.The Microscope in DetailThe BRESSER Science MTL 201 is a specialised reflected light microscope that allows the observation of non-transparent surfaces at higher magnifications (50x-800x). Ideal fields of application for this very solidly manufactured instrument include metallography (e.g. polished sections of metals and alloys), mineralogy, precision mechanics, electronics, and the semiconductor industry; it is suitable for scientific research and teaching as well as industrial production (e.g. quality control). According to its purpose, the MTL 201 features a very large stage (250 mm x 230 mm), which can be roughly moved with a handle and finely adjusted with cross and longitudinal drives. For perfect focusing, coarse and fine focus (coaxial; approx. 70 µm/turn) are available. The reflected light illumination is provided by a halogen bulb (20 W) with adjustable light intensity through the objective. A centring field diaphragm, a selection of filters (yellow, green, blue, matte), and a polariser/analyser combination are available to the observer. The five-position turret is equipped with planachromatic DIN objectives (5x, 10x, 20x, 40x, 80x). The trinocular microscope head carries the eyepiece tubes inclined at 30° and the photo tube. The widefield eyepieces (WF10x) are adjustable for eye relief and dioptre difference. The photo tube allows digital image capture, e.g. via an optionally available PC eyepiece. Additional optional accessories: eyepiece (WF16x), measuring eyepiece (WF10x), planachromatic objective (50x).The BRESSER Science MTL 201 is a specialised reflected light microscope that enables surface examinations of metals or plastics. Thus, it is excellently suited for quality testing or tissue examination.MICROSCOPE SCOPE OF DELIVERYMicroscopeEyepieces (2 pieces WF 10x)Objectives (5x, 10x, 20x, 40x, 80x)Coaxial cross tableColour filters (green, blue, yellow, matte)Dust coverPower cableThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality combined with user-friendly operation. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (Art. No. 5914110) can be mounted directly on the camera and provides brilliant and high-contrast images. Due to its very high light sensitivity, good image quality is ensured even in low light. This model is particularly recommended for darkfield or phase contrast.The autofocus allows optimal focusing of the camera without using the microscope's focus wheels. This ensures parfocality on various trinocular microscopes. The focussable range extends from position 0, which corresponds to the C-Mount distance, through focusing up to 5.4 mm forward, thus also reaching the CS-Mount distance, and additionally up to 10.6 mm inward to cover an even larger range. Besides autofocus, the camera can also be focused manually via mouse. Focus adjustment to a specific area is also possible.Camera functions are operated via mouse directly on the on-screen menu. Measurements can be performed via the on-screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully functional digital measuring microscope.The MikroCam PRO HDMI Autofocus offers a variety of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine visionThus, the MikroCam PRO Autofocus is excellently suited as an industrial camera with a very good price-performance ratio.Additionally, the camera can provide the microscope view in a wireless network via WiFi module. When connected via HDMI, images and videos can be recorded directly on an SD card (not included). A USB connection to a PC is not provided for this model. For this, we recommend the MikroCam Pro HDMI 5914180 model.MICROSCOPE CAMERA FEATURESHDMI connection for monitor or televisionBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (*object micrometer Art. No. 5916720 required for calibration)Wide dynamic range function (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-Mount distance) to 10.6 mm1/4" tripod thread, e.g. for a photo tripodC-Mount thread: for easy adaptability, also suitable for C-Mount objectivesSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and simultaneously view the image on the monitor. The display provides optimal image quality with a wide viewing angle of 178°! Thus, several people can view the image without loss of quality.The microscope camera image is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. Display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is especially advantageous when working under microscopic control.Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable short, angled HDMI cable is also included, so cable clutter at the workplace is avoided. Mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.DISPLAY FEATURES16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINIWide viewing angle (178°)No separate power supply necessarySCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Allen keyUser manual

Make amazing discoveries in the microcosmos and capture image and video? That is now possible and you don't need a PC to do it. The digital BRESSER Biolux Touch HDMI microscope is the perfect tool to do it. It is very versatile, ideal for school and hobby. You can easily view the image on the touchscreen.  The integrated, high quality 5MP camera sensor captures images and HD videos directly onto an SD card (SD card not included).The camera is controlled via the touch screen with an intuitive and multi language user menu. With two fingers you can zoom in to see even more detail.The microscope is also perfect to use in schools, for teaching or seminars. The live stream from the microscope can be viewed on a big monitor or TV screen with the HDMI connection. HDMI will deliver a latency free video stream with a framerate of 30 fps.The mechanical crosstable and the coarse and fine focus makes adjusting and screening the sample easy. The 40x objective is sufficient to view small microorganisms and even bacteria, e.g. from a hay infusion. With the additional reflected light you can also view (small) non transparent samples, like plant matter, sand, or insects. The reflected light should be used with the 4x lens. A sample preparation is usually not necessary in this viewing mode, which makes it especially easy for children to get their first glimpse of the micro world.FEATURESCapture images and HD video directly, no PC neededWith 5MP Aptina CMOS camera sensorLCD screen with touch and zoom functionWith fine focus and mechanical crosstableSlot for SD card (up to 32GB, not included)HDMI Type A socketUSB socket3 objectives: 4x/10x/40xLED light (transmitted / reflected), dimmableWith many accessoriesSCOPE OF DELIVERYMicroscope with touch screenHDMI cableAC adapter 5V, 1A (EU)Set of tools (preparation needles, pipette, tweezers, MikroCut)Artemia set to hatch fairy shrimpsCase with 5 prepared slides, 10 empty slides and 10 cover glassesDust cover

This NATIONAL GEOGRAPHIC 40x1280 reflected and transmitted light microscope is a perfect device to get an excellent access into the world of microscopy. Due to many exclusive accessories like a set of dissecting instruments or a seperate electronical eyepiece, you can expand your beginner´s model. Furthermore, a smartphone holder gives the possibilty to make pictures of your observations with your smartphone. The smartphone holder allows for an easy observation as well as saving your observations on your smartphone. FEATUREScombination of reflected and transmitted lighta wide range of magnificationsextensive range of accessories for an immediate startSCOPE OF DELIVERY2 eyepieces (10X WF ; 16X WF) 2-fold Barlow lens Power cable Plastic box with 5 blank slides, 10 cover plates, 5 prepared slides Pipette Tweezers Hatchery MicroCut Specimen (yeast, gum media, sea salt, shrimp eggs) Smartphone holder

In contrast to usual light, polarized light has a preferred vibration plane of the light waves. Polarized light lets be seen anisotropic objects, whose observable properties are depending on the direction, "in a new light": crystals, but also animal hairs, feathers, muscles, nerve fibres and vegetable cell walls, which have a preferred direction of its biomolecules, show structures now, which were hidden in the normal bright field image. Images made by polarized light are often characterized by a fantastic coloring. Polarization microscopes are used particularly in mineralogy, geology, biology and medicine. In order to change the object's direction in a controlled way, the Science MPO 401 has a round, center-adjustable and full rotatable object stage with degree scale. The illumination and observation unit encloses e. g. the halogen bulb lamp (20 W) with dimmer, the field diaphragm (used to achieve the Köhler illumination), the 360° rotatable polarizer (for the production of polarized light), centering implements for the objectives and the analyzer attachment (for the analysis of the polarized light). The analyzer attachment is meant for receiving the 360° rotatable analyzer and optional available sliders (Bertrand lens for conoscopy; quartz wedge, lambda plate and lambda/4 plate used in order to get special colour effects). The wide field eyepieces (WF10x), which are also optional available, are placed at the trinocular head with an inclination of 30°. They have eye relief adjustment as well as diopter adjustment. The images shown by them are bright, true colored, sharp and rich in details. Apart from the slips and eyepieces, which were mentioned above, the accessories of the MPO 401 contain a dividing eyepiece (WF10x), the Abbe condenser with iris diaphragm, special polarization objectives (4x, 10x, 40x retractable, 100x-oil retractable), filters (blue, ground glass) and immersion oil. SCOPE OF DELIVERYmicroscope2x WF10x eyepieces 4 DIN-objectives (PL4x, PL10x, PL40x, PL100x oil)360° rotatable mechanical stage phasen shifter Amici Bertrand lenspolarizer/analyzer combinationdust coverpower cable

This high-quality combination set, consisting of the professional Science TRM-301 microscope, the powerful MikroCam PRO HDMI 5MP, and the matching 13.3" HDMI monitor, offers a complete solution for modern laboratory use and impressive presentations. It combines precise microscopy with crystal-clear live image transmission – ideal for research, teaching, and demonstrations.The Microscope in DetailThe BRESSER Science TRM-301 is a trinocular transmitted light microscope of top class: Excellent image reproduction, good ergonomics, high stability, and an appealing design characterize it. As a fully usable laboratory microscope, it finds wide applications in medicine, biology, agriculture, and industry. It is also highly recommended for the dedicated hobby microscopist as a ''microscope for life''.A particularly important feature of the TRM-301 is its ability for so-called Köhler illumination. Through this optimal specimen illumination, which is exceptionally bright, cool (specimen-friendly), uniform, glare-free, and high-contrast, the performance of the microscope optics is fully utilized. It therefore represents the standard in scientific work and microphotography. The Köhler illumination is adjustable with the fixed built-in field diaphragm and the height-adjustable and centering Abbe condenser (numerical aperture 1.25; with iris diaphragm).Of course, the TRM-301 also features the other typical equipment for high-quality microscopes: with a cross stage that moves both horizontally and vertically with Nonius scales, ergonomic coaxial focusing drives (the fine drive achieves 200 µm/revolution), stepless lamp dimmer, plan achromatic objectives (4x, 10x, 40x, 100x-oil spring), 10x wide field eyepieces (in 30° inclined eyepiece tubes), inter-pupillary distance and diopter adjustment, as well as a photo tube.FEATURES OF THE MICROSCOPETransmitted light microscopeType of head: TrinocularMagnification: 40x - 1000x2 eyepieces: both WF 10x (23mm)4 objectives: 4x, 10x, 40x, 100x oilType of objectives: Plan achromaticCondenser: Abbe N.A. 1.25Illumination: 12V/30W halogen with dimmerSCOPE OF DELIVERY OF THE MICROSCOPEMicroscope2x eyepiece4x objectivecoaxial cross stage with Nonius adjustmentImmersion oilDust coverPower supply 12V, 4AThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality while also being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images.For high-resolution micro photos, this camera features a high-quality Sony 5MP sensor, allowing images and videos to be saved on an SD card with higher resolution than Full HD.The operation of the camera functions is done via mouse directly on the screen menu. Through the screen menu, measurements can now also be performed, turning your microscope with the MikroCam Pro HDMI 5MP into a fully-fledged digital measuring microscope.Additionally, the camera can also provide the microscope view in a wireless network via WiFi module. However, a connection to the PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.The professional software MikroCamLabII is still included, allowing images to be edited and evaluated later with the software.Software for image evaluation included in the following languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseSimplified ChineseTraditional ChineseThe software features numerous functions for image processingMeasurement function (additional object micrometer required, e.g., Bresser article no. 5916720): lengths, angles, areas (polygons, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range)FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY OF THE MICROSCOPE CAMERAMikroCam Pro HDMI 5MP with C-Mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so that cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done with two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply requiredSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyOperating instructions

The New BRESSER Science TFM-301 is a trinocular microsscope, which is equipped with semiplan objectives. In addition to the binocular viewing pictures can also be made via the trinocular tube with C mount thread. The WF 10x eyepieces offer a large visual field of 20mm. The interpupillary distance can be adjusted from ca. 55mm to 75mm. Dioptre adjustments are possible with both eyepieces.The Köhler illumination is regulable with the built-in luminous-field diaphragm and the vertically and horizontally adjustable Abbe condenser (numerical aperture 1.25, with iris diaphragm). An imprint of the different possible magnifications on the condenser makes the adjustment of the iris diaphragm very fast and precise.Coaxial pinions drive the stage and focus which enables ergonomic operation of the microscope.The trinocular tube enables the direct attachment of a c-mount camera or MikroCam.SCOPE OF DELIVERYMicroscope with integrated LED illuminationsemiplan objectives (4x, 10x, 40x, 100x oil)2x eyepieces (WF 10x)Mains adapterMains adapterManualImmersion oilDust cover

Because of its large swing range and very large working distance the BRESSER Biorit ICD CS offers an excellent basis for various observations . It is the perfect choice for fine handiwork, e.g. soldering of SMD components, quality control of parts, electronics etc.FEATURESstereo microscope with large swing range and high working distanceLED illumination/AC Powerworking distance with 1.0x objective (approx.): 230 mm / swing arm: 210 mmobject height: 70 mmSCOPE OF DELIVERYstereomicroscopedust cover1 pair of rubber eye cupsadditional objective 0,5x / 1.0x / 2.0xpower cable

The BRESSER Science MTL 201 is a special reflected light microscope, which allows to observe non-transparent surfaces at higher magnifications (50x-800x). This solid designed instrument is ideal for working in metallography (e. g. microscopy of polished samples of metals or alloys), mineralogy, precision engineering and electronics. It is suitable for scientific research, teaching demonstration and industrial production (e.g. quality controlling). According to its purposes, the MTL 201 is equipped with a large stage (250 mm x 230 mm), which can be moved coarsely by a quick adjustment lever and finely by a transverse and a longitudinal knob. The focuser has coarse and fine drive (coaxial; circa 70 µm/ full turn). The illumination is done by a halogen lamp (20 W) with a dimmer. The light comes through the objective from above onto the sample. There are a field diaphragm, which can be centered, some filters (yellow, green, blue, ground glass) and a polarizer/analyzer combination. The fivefold nosepiece is equipped with planachromatic DIN objectives (5x, 10x, 20x, 40x, 80x). The trinocular head bears two 30° inclined ocular tubes and the photo tube. The oculars (with 10x wide field lenses) have diopter and eye relief adjustments. The photo tube allows for digital imaging, e. g. with an optional available PC eyepiece. Further optional accessories: Eyepiece (WF16x), dividing eyepiece (WF10x), planachromatic objective (50x). FEATURESType: Metallurgical microscopeView: Trinocular Comfortable binocular view, 30° declinedApplication range: Metallurgy, Mineralogy, Research, Laboratory, Quality inspection, Quality inspectionIllumination: Halogen Transmitted 12V/30W, adjustableLevel: Intermediate, ExpertWarranty: 2 yearsIntegr. dimmerGenerously dimensioned object plateAdjustable eye reliefDiopter Adjustment SCOPE OF DELIVERYMicroscopeEyepieces (2x WF 10x)Objective lenses (5x, 10x, 20x, 40x, 80x)Coaxial stageColour filters (green, blue, yellow, matt)Dust coverPower cable

Whether for school, university, or a hobby, the high-quality BRESSER Biorit SE 1600x Microscope is perfect for a wide range of applications. Thanks to the optional battery operation, it’s also portable. The adjustable LED lighting of the Biorit SE 1600x ensures ideal illumination, with separate controls for both transmitted and incident light, allowing you to dim each light independently. The microscope offers a magnification range of 40x to 1600x, and the 2x Barlow lens allows for additional zooming. Precise observations are supported by the coarse and fine focus adjustments. To protect your samples, the 40x objective lens is spring-loaded. The colour filter wheel makes it easy to highlight different details of your samples. With a modern design and a rear-facing revolving nosepiece, the microscope is extremely user-friendly. The Biorit SE 1600x also features a 360° rotatable monocular viewing head, and it can be powered via a computer or power bank (not included) using the included USB cable and power adapter. To help you get started right away, the microscope comes with 5 prepared slides and blank slides for your own samples. The smartphone camera holder lets you easily take photos and videos through the eyepiece.  FEATURES Biological microscope suitable for beginners and advanced users Magnification: 40x – 1600x Three objectives in the revolving nosepiece: 4x, 10x, 40x Eyepieces: WF10x, WF20x 2x Barlow lens Eyepiece diameter: 23.2 mm Applications: Biology, Botany, Education LED incident and transmitted light Integrated dimmer Coarse and fine focus Comfortable monocular viewing with a 360° rotatable head Power supply: 3 AA batteries (not included), mains plug with USB cable SCOPE OF DELIVERY Microscope 5 prepared slides Blank slides Smartphone holder WF10x and WF20x eyepieces 2x Barlow lens 2 pipettes Protective cover Mains plug USB cable User manual

In the microscope's basis, there are a transmitted light LED illuminator (3 W) as well as the power supply and the continuous adjustable dimmer for transmitted light. The trinocular head allows to mount a SLR camera or a USB microscope camera with an optional adapter. The inclination of the eyepiece tubes is 30°. The fluorescence attachment includes a special LED wheel with four different lamps (green, blue, violett, ultraviolett), a filter wheel and a radiation shield. The LED lamps produces the exciting radiation in order to get fluorescence. Fluorescence microscopy is done e. g. in biology, medicine, microchemistry, geology, semiconductor production and environmental protection. The Science ADL 601F LED is an instrument with an excellent value for money. It has also the other features, which are typical for high-quality microscopes: fourfold objective nosepiece, lengthwise and cross moveable stage, coaxial focusing knobs (concerning fine drive: 200 µm / full turn), adjustment of eye relief, diopter adjustment and the phototube. Optional available, general accessories are the wide field eyepieces (WF10x, WF15x), the dividing eyepiece (WF10x), and dark field condensers (dry and oil). FEATURESType: biology MicroscopeView: TrinocularApplication range: Biology, Gemology, Botany, Education, Teaching, Entomology, Forensic, Research, Laboratory, Medical science, Pathology, Veterinary medicineIllumination:  LEDLevel: Intermediate, ExpertWarranty: 2 years1.25 Abbe-condenser with iris diaphragm and filter holderIncl. adjustable mechanical stage Integr. dimmerAdjustable eye reliefDiopter adjustment SCOPE OF DELIVERYMicroscope4 DIN-objectives (PL 4x, PL 10x, PL 100x oil, PL-FL 40x)2x 10x eyepieces 1.25 Abbe-condenser with iris diaphragm and filter holderFluorescence attachment with LED wheel (green, blue, violett, ultraviolett) and respective emission filtersImmersion oilFull Koehler illumination for transmitted light

The powerful combination set with the professional Science ADL-601P microscope, the powerful MicroCam Mini HDMI, and the matching screen offers a comprehensive solution for demanding reflected and transmitted light observations. Ideal for modern laboratory use, it allows for comfortable live display, precise analyses, and efficient documentation – perfect for research and quality control.The Microscope in DetailThe BRESSER Science ADL 601 P is a professional transmitted and reflected light microscope. The microscope base contains a halogen transmitted light illumination (20 W) as well as the power supply and the two continuously adjustable dimmers for reflected and transmitted light. The two trinocular microscope heads combine both illumination functions, as well as the possibilities for photography and binocular observation; the inclination of the eyepiece tubes is 30°. With the polarization attachment, material science or apparatus technical investigations can be carried out in research, teaching, and production. The halogen reflected light illumination (20 W), which goes through the objective onto the specimen, can be modified by a color filter wheel and a polarizer/analyzer combination for special applications. Overall, the BRESSER Microscope Science ADL 601P is a uniquely priced instrument that also features the further equipment typical for high-quality microscopes: four-objective turret, cross table movable in both directions, coaxial focusing drives (fine: 200 µm/revolution), inter-pupillary distance and diopter adjustment, as well as a photo tube. Optional general accessories include wide-field eyepieces (WF10x, WF16x), measuring eyepiece (WF10x), various plan achromatic DIN objectives (e.g., 4x, 5x, 10x, 20x, 40x spring-loaded, 60x spring-loaded, 100x-oil spring-loaded), the Abbe condenser (numerical aperture 1.25; with iris diaphragm and additional lens), dark field condensers (dry and oil), immersion oil, as well as a phase contrast device.The Science ADL-601P combines a biological transmitted light microscope with a reflected light microscope. This also allows for the examination of surfaces at the highest resolution!SCOPE OF DELIVERY MICROSCOPEMicroscopeEyepieces (pair DIN WF 10x)Objectives (PL5x, PLL10x, PLL40x, PLL60x)Abbe condenser (1.25 with iris diaphragm)The Microscope Camera in DetailThe MicroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required for operating the camera; you can simply connect the MicroCam MINI Full HD HDMI to an existing monitor, TV, projector, or smartboard. This makes it ideal for use in teaching. Alternatively, a small monitor from BRESSER can also be mounted directly on the camera (see item no. 5914120).The connection via HDMI is easy to make, and the camera is ready for use immediately. No software installation, PC setup, etc. is necessary. Due to the lossless data transmission, very good image quality is achieved, and the image is always displayed with a consistently high frame rate of 60 fps and without delay. This is particularly advantageous when a microscope workstation is to be digitized, for example, in quality control or production.To control the camera, the included USB mouse is connected. This allows you to control the three menus (camera settings, measurement*, and display).*To take measurements with the camera, a calibration specimen is required (e.g., item no.: 5916710 or 5916720).The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and the mouse pointer are then not visible.Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for that. The USB port is only for controlling the camera with the mouse.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for direct connection to a monitor, TV, projector, or smartboardC-Mount thread for easy adaptability to various microscopes (manufacturer-independent)Compatible with USB sticks or SD card readers (max. storage size: 512 GB)No PC/laptop necessarySCOPE OF DELIVERY MICROSCOPE CAMERAMicroCam MINI Full HD HDMI with C-Mount connectionPower supply (12 V / 2A)USB mouseHDMI cable (approx. 1.5 m)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MicroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MicroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows for observation independent of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! This way, multiple people can view the image without loss of quality.The image from the microscope camera is always displayed on the HDMI screen without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than when using a USB camera on a laptop or PC. This is particularly advantageous when work is to be carried out under microscopic control.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be operated with the included Y-cable using the same power supply as the camera. A suitable short angled HDMI cable is also included, so cable clutter at the workplace is avoided. The mounting on a MicroCam PRO or MINI is done using two screws. Screws and tools are included in the delivery.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MicroCam PRO or MINILarge viewing angle (178°)No separate power supply necessarySCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

Powerful combo set for precise observations and razor-sharp images. This high-quality set combines the professional Science ETD-301 stereo microscope, the modern MikroCam Mini HDMI microscope camera, and a compact 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live presentations. A suitable adapter is also included.The Microscope in DetailThe BRESSER Science ETD-301 is a reflected and transmitted light stereo magnifier with high-quality optics. It is suitable for use in medicine, agriculture and forestry, criminology, scientific research institutes, and schools, as well as for assembly and inspection of small components in precision mechanics and electronics. The particularly wide base with object table allows viewing of larger objects. The maximum object height is approx. 85 mm. The large working distance of 100 mm allows working with tools, e.g. for preparing or dissecting, measuring or testing. The instrument features LED reflected and transmitted illumination, which can be used individually or combined and each continuously adjustable. The reflected light incidence angle is particularly user-friendly adjustable. With interchangeable widefield eyepieces (WF10x) and a 9x stereo zoom objective (0.7x - 6.3x), a continuous magnification range of 7x to 63x is achieved. The coarse and fine focusing allows precise sharpness adjustment, especially at high magnifications and for photography. The eye distance and dioptre adjustment are individually adjustable. The trinocular microscope head can be rotated 360° and has two eyepiece tubes inclined at 45°. The trinocular tube can carry a DSLR / system camera (APS-C or DX format) or a C-mount camera (sensor size up to 1'') using an optional adapter. A switch diverts the light path from one eyepiece to the camera. This provides 50% light, more than a microscope with a permanent beam splitter. To connect a DSLR / system camera, adapter Art. No. 5942100 and a camera-specific T2 ring are required. A C-mount camera is connected with adapter Art. No. 5942101. MICROSCOPE FEATURESWF 10x eyepieces with 22 mm field of view (based on a 1x objective)Large, continuously adjustable 9x zoom (7x - 63x magnification)Suitable for DSLR / system cameras and C-mount cameras with optional adaptersStand with coarse and fine focusing MICROSCOPE SCOPE OF DELIVERYMicroscope zoom headMicroscope stand with power cableWF 10x eyepieces with 22 mm field of view (2 pieces)Translucent plastic object plateDust coverThe Microscope Camera in DetailThe MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector or smartboard. This makes it ideal for use in teaching. Alternatively, a small BRESSER monitor can be mounted directly on the camera (see Art. No. 5914120). The HDMI connection is easy to make and the camera is ready to use immediately. No software installation, PC setup, etc. is necessary. Thanks to lossless data transmission, very good image quality is achieved and the image always has a consistently high frame rate of 60 fps and is delay-free. This is particularly advantageous when a microscope workstation is to be digitised, e.g. in quality control or production. The supplied USB mouse is connected for control. This allows the three menus (camera settings, measurement* and display) to be controlled. *To perform measurements with the camera, a calibration slide is required (e.g. Art. No.: 5916710 or 5916720). The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and mouse pointer are then not visible. Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for this. The USB port is only for controlling the camera with the mouse. MICROSCOPE CAMERA FEATURES HDMI connection for direct connection to a monitor, TV, projector or smartboard C-mount thread for easy adaptability to various microscopes (manufacturer-independent) Compatible with USB sticks or SD card readers (max. storage size: 512 GB) No PC/laptop necessary MICROSCOPE CAMERA SCOPE OF DELIVERY MikroCam MINI Full HD HDMI with C-mount connection Power supply (12 V / 2A) USB mouse HDMI cable (approx. 1.5 m) The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMI The display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC. The size of the display is optimally chosen so that the microscope user can microscope as usual and simultaneously view the image on the monitor. The display delivers optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality. The image from the microscope camera is always displayed delay-free and with a high refresh rate of 60 FPS on the HDMI screen. Displaying via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out. Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture are unpleasant for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here. The display can be powered with the supplied Y-cable using the same power supply as the camera. A suitable short, angled HDMI cable is also included to avoid cable clutter at the workstation. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included. DISPLAY FEATURES 16:9 Full HD monitor with a resolution of 1920 x 1080 pixels Active area: 16.5 x 29.4 cm Easy mounting directly on a MikroCam PRO or MINI Wide viewing angle (178°) No separate power supply necessary SCOPE OF DELIVERY 13.3" display HDMI cable Y-cable for power supply via camera power supply Mounting screws (2 pieces) Allen key Operating instructions

Powerful combination set for precise observations and sharp representations. This high-quality set combines the professional digital microscope DST-0745, the modern microscope camera MikroCam Mini HDMI, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live displays.The microscope in detailThe BRESSER DST-0745 is a special microscope that operates with a C-Mount camera (not included).Thus, direct viewing on a screen is possible. Due to the vertically mounted optics, there is no image shift when focusing. This is especially advantageous for "focus stacking" shots.The zoom is continuously adjustable from 0.7x to 4.5x. A coarse and fine focus makes focusing easier, especially at high magnifications.Due to the convenient and user-friendly operation, the digital microscope is particularly suitable for daily use in the workshop. Measurements, quality controls of surfaces, or checking components and raw materials become easy with the workshop microscope. Insects, plants, and rocks are also impressively displayed.The DST-0745 workshop microscope is not suitable for visual observation, as it is only a zoom lens. It is used in conjunction with a MikroCam C-Mount.It is designed for camera sensors of about 1/2".With the two flexible incident light lamps, the light can be optimally positioned.The transmitted light illumination helps in observing transparent objects. The brightness of both illuminations can be adjusted in five levels.The magnification of a USB camera differs from the lens magnification. Therefore, a total magnification of the digital system cannot be specified. It depends on the sensor size and the display on a monitor.Compatible MikroCam cameras:5914122 MikroCam SF Full HD5914321 MikroCam SP 3.1 MP5914520 MikroCam SP 5.0 MP5914522 MikroCam SF 5.0 MP5914822 MikroCam SF UHD5914912 MikroCamII 12MP USB 3.05914170 MikroCam MINI Full HD HDMI5914185 MikroCam PRO HDMI 5MP5914190 MikroCam Pro HDMI AutofocusFEATURES OF THE MICROSCOPEDesigned for C-Mount microscope camerasUp to 1/2" sensor size is suitableMax. object height: 190 mmContinuously adjustable zoom (0.7x - 4.5x)Two flexible incident light LED lampsLED transmitted light illuminationAdjustable brightnessSCOPE OF DELIVERY OF THE MICROSCOPEZoom objective head 0.7x - 4.5xStand with incident and transmitted light illuminationGlass object plate (one side frosted)Plastic object plate (one side white, one side black)Power supply, user manual, dust coverThe microscope camera in detailThe MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector, or smartboard. This makes it ideal for use in education. Alternatively, a small monitor from BRESSER can also be mounted directly on the camera (see item no. 5914120).The HDMI connection is easy to make, and the camera is ready to use immediately. No software installation, PC setup, etc. is required. Through lossless data transmission, very good image quality is achieved, and the image is always displayed with a consistently high frame rate of 60 fps and without delay. This is particularly advantageous when a microscope workstation, for example, in quality control or production, needs to be digitized.To control the camera, the included USB mouse is connected. This allows you to control the three menus (camera settings, measurement*, and display).*To take measurements with the camera, a calibration specimen is required (e.g., item no.: 5916710 or 5916720).The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and the mouse pointer are then not visible.Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for that. The USB port is only for controlling the camera with the mouse.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for direct connection to a monitor, TV, projector, or smartboardC-Mount thread for easy adaptability to various microscopes (manufacturer-independent)Compatible with USB sticks or SD card readers (max. storage size: 512 GB)No PC/laptop necessarySCOPE OF DELIVERY OF THE MICROSCOPE CAMERAMikroCam MINI Full HD HDMI with C-Mount connectionPower supply (12 V / 2A)USB mouseHDMI cable (approx. 1.5 m)The display in detailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! This allows multiple people to view the image without loss of quality.The image from the microscope camera is always displayed on the HDMI screen without delay and with a high refresh rate of 60 FPS. The display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done with two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

The BRESSER DST-0745 is a special microscope that is operated with a c-mount camera (camera not included). This allows direct viewing on a screen. Due to the vertically installed optics, there is no shifting of the image when focusing. This is especially useful for "focus stacking" shots. The zoom is continuously adjustable from 0.7x - 4.5x. A coarse and fine focus adjustment facilitates focusing, especially at high magnifications. The convenient and user-friendly operation makes the digital microscope particularly suitable for daily use in the workshop. Measurements, quality control of surfaces or inspection of components and raw materials are easy with the workshop microscope. Insects, plants and rocks are also impressively displayed. The DST-0745 workshop microscope is not suitable for visual observation. It can only be used in combination with a MikroCam c-mount microscope camera. It is designed for camera sensors of about 1/2". Smaller sensors can be used without problems. With larger sensors there is vignetting, which becomes somewhat less at higher magnifications. Due to the two flexible incident light lamps, the light can be optimally positioned. The transmitted light illumination helps when observing transparent objects. The brightness of both illuminators can be adjusted in five steps. The magnification of a USB camera differs from the magnification of the lens. It depends, among other things, on the sensor size and the display on a monitor. It can be compared to macro lenses with macro factor 0.7:1 up to 4.5:1. Compatible MikroCam cameras: 5914131 MikroCam SP 1.3 MP 5914320 MikroCam SP 3.1 MP 5914520 MikroCam SP 5.0 MP 5914004 MicroCamII 5914020 MicroCamII 5914310 MicroCamII 5914912 MicroCamII 5914180 MikroCam PRO HDMI 5914190 MikroCam PRO HDMI 5MP 5914195 MikroCam Pro HDMI Autofocus FEATURES Designed for C-mount microscope cameras Up to 1/2" sea sensor size Continuous zoom (0.7x - 4.5x) Two flexible incident light LED lamps LED transmitted light illumination Adjustable brightness SCOPE OF DELIVERY Zoom lens head 0.7x - 4.5x Stand with incident and transmitted light illumination Object plate glass (one side frosted) Object plate plastic (one side white, one side black) Power supply unit, operating instructions, dust cover

The BRESSER BioScience is the perfect instrument for laboratory use. The size and ergonomic design is perfect for prolonged use. The Köhler Illumination System provides a brilliant image quality. The trinocular tube will connect a MicroCam or other C-Mount microscope camera directly with the optional C-Mount adapter 5942101. An optional adapter (5942100) for DSLR and system cameras is also available. The standard bright field illumination (30W halogen) ensures a pleasant and differentiated colour rendering and is also bright enough for contrasting method like phase contrast and dark field (optional)FEATURESKöhler Iluminatorseparate AC-adapter, for high safetycoaxial mechanical desk with nonius scalecoarse and fine focusing Eyepiece: 2x WF 10x/18 (23 mm diameter)4 Objectives with DIN 4x / 10x / 40x / 100x (oil) magnificationType of objective: AchromaticAbbe N.A. 1.25 CondenserIllumination: 12V/ 30W halogen with dimmerSCOPE OF DELIVERYmicroscopedust cover2x eyepiece4x DIN objectives1x condenserimmersion oil230V power supply (12V/ 3A)

The well-designed combo set with the professional Science MTL-201 microscope and the high-resolution MikroCam PRO HDMI 5MP, together with the 13.3" monitor, offers a powerful complete solution for precise metallurgical examinations and diverse laboratory applications. The direct image transmission to the monitor enables comfortable live observation, vivid presentations, and efficient documentation - ideal for research and quality assurance.The Microscope in DetailThe BRESSER Science MTL 201 is a specialised reflected light microscope that allows the observation of non-transparent surfaces at higher magnifications (50x-800x). Ideal fields of application for this very solidly manufactured instrument include metallography (e.g. polished sections of metals and alloys), mineralogy, precision mechanics, electronics, and the semiconductor industry; it is suitable for scientific research and teaching as well as industrial production (e.g. quality control). According to its purpose, the MTL 201 features a very large stage (250 mm x 230 mm), which can be roughly moved with a handle and finely adjusted with cross and longitudinal drives. For perfect focusing, coarse and fine focus (coaxial; approx. 70 µm/turn) are available. The reflected light illumination is provided by a halogen bulb (20 W) with adjustable light intensity through the objective. A centring field diaphragm, a selection of filters (yellow, green, blue, matte), and a polariser/analyser combination are available to the observer. The five-position turret is equipped with planachromatic DIN objectives (5x, 10x, 20x, 40x, 80x). The trinocular microscope head carries the eyepiece tubes inclined at 30° and the photo tube. The widefield eyepieces (WF10x) are adjustable for eye distance and dioptre difference. The photo tube allows digital image capture, e.g. via an optionally available PC eyepiece. Additional optional accessories: eyepiece (WF16x), measuring eyepiece (WF10x), planachromatic objective (50x).The BRESSER Science MTL 201 is a specialised reflected light microscope that enables surface examinations of metals or plastics. It is therefore excellently suited for quality testing or tissue examination.MICROSCOPE SCOPE OF DELIVERYMicroscopeEyepieces (2 pieces WF 10x)Objectives (5x, 10x, 20x, 40x, 80x)Coaxial cross tableColour filters (green, blue, yellow, matte)Dust coverPower cableThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality combined with user-friendly operation. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (Art. No. 5914110) can be mounted directly on the camera and provides brilliant and high-contrast images.For high-resolution microphotos, this camera features a high-quality Sony 5MP sensor, allowing images and videos to be saved on an SD card at resolutions higher than Full HD.The camera functions are operated via mouse directly on the on-screen menu. Measurements can now also be performed via the on-screen menu, turning your microscope with the MikroCam Pro HDMI 5MP into a fully-fledged digital measuring microscope.Additionally, the camera can provide the microscope view in a wireless network via a WiFi module. However, a USB connection to a PC is no longer provided with this model. For this, we recommend the MikroCam Pro HDMI 5914180 model.The professional MikroCamLabII software is still included, allowing images to be edited and analysed afterwards.Image Analysis Software Included in the Following Languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseChinese (Simplified)Chinese (Traditional)The software offers numerous functions for image processingMeasurement function (additional stage micrometer required e.g. Bresser article no. 5916720): distances, angles, areas (polygon, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range)MICROSCOPE CAMERA FEATURESHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (stage micrometer Art. No. 5916720 required for calibration)Wide dynamic range function (WDR)Saving images and videos on SD card (not included) max. 32 GBSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0MICROSCOPE CAMERA SCOPE OF DELIVERYMikroCam Pro HDMI 5MP with C-Mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can continue to use the microscope as usual and simultaneously view the image on the monitor. The display provides optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality.The microscope camera image is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. Display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is especially advantageous when working under microscopic control.Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture can be uncomfortable for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable short, angled HDMI cable is also included, so cable clutter at the workplace is avoided. Mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.DISPLAY FEATURES16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINIWide viewing angle (178°)No separate power supply necessarySCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Allen keyOperating instructions

The BRESSER Biolux NV comes with a wide range of accessories and is an ideal beginners' microscope. A unique feature of these models, the Barlow zoom system is inside the eyepiece tubes: With the barlow lens the magnification can be  varied by a factor of 2 in visual observation. This feature, together with 3 objectives and 2 interchangeable wide field eyepieces gives a magnification range from 20x to 1280x. With the mechanical desk you can move your sample precisely even when observing at high magnifications. For optimal illumination a variable LED for transmitted and incident light together with a filter wheel gives the ideal light for all samples. Light from above is especially imortant to observe non transparent samples like leaves, small insects and much more. This makes microscopy for beginners very easy! The power is supplied by batteries (3x AA). A dust cover, 5 prepared slides and 5 blank slides and cover slips are included for making your own samples. With the included HD camera you can observe your samples on the computer screen, and capture images and video with the included Windows software. The software is compatible with Windows 10 and 11. With this camera, you can always document your interesting observations and share them with others. FEATURESbiological microscope with HD cameraLED light for transmitted and incident lightbattery-poweredlots of accessoriesincident light for objects not higher than 4mm SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYSolid metal Microscopemechanical deskHD camera with metal housing, resolution 1280 x 7202 eyepieces: 5x and 16x3 objectives: 4x, 10x and 40x1 Barlow lens with 2x magnificationMicroscope toolsmechanical cross table5 prepared slides5 blank slidesDust cover and hard case

Powerful combination set consisting of the Science TFM-301 Trino Microscope, the MicroCam Mini HDMI camera, and a matching 13.3" monitor – ideal for school, hobby, and profession. This set combines the solid Science TFM-301 microscope with the MicroCam Mini HDMI and a 13.3" monitor to document observations directly.The microscope in detailThe NEW BRESSER Science TFM-301 microscope is equipped with semi-plan objectives.The binocular view allows for comfortable observation. The trinocular port offers the possibility to connect a C-Mount camera.The WF 10x eyepieces have a field of view of 20 mm and therefore provide a large field of view.The interpupillary distance can be adjusted from approximately 55 mm to approximately 75 mm. A diopter adjustment is possible with both eyepieces.The powerful and durable LED illumination is adjustable.The Köhler illumination can be adjusted with the fixed built-in field diaphragm and the height-adjustable and centering Abbe condenser (numerical aperture 1.25; with iris diaphragm). The condenser also features a printout of the various magnifications, allowing for quick and precise adjustment of the iris diaphragm.The coaxial drives of the stage adjustment and the coarse and fine focusing enable ergonomic working.The trinocular port allows for the direct connection of a C-Mount camera or MicroCam.SCOPE OF DELIVERY MICROSCOPEMicroscope stand with integrated LED illuminationSemi-plan objectives (4x, 10x, 40x, 100x oil)Two WF 10x eyepiecesC-Mount adapterImmersion oilDust coverPower supplyUser manualThe microscope camera in detailThe MicroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MicroCam MINI Full HD HDMI to an existing monitor, TV, projector, or smartboard. This makes it ideal for use in the classroom. Alternatively, a small monitor from BRESSER can also be mounted directly on the camera (see item no. 5914120).The HDMI connection is easy to make, and the camera is ready to use immediately. No software installation, PC setup, etc. is necessary. Due to the lossless data transmission, very good image quality is achieved, and the image is always displayed with a consistently high frame rate of 60 fps and without delay. This is particularly advantageous when a microscope workstation, for example, in quality control or production, needs to be digitized.To control the camera, the included USB mouse is connected. This allows you to control the three menus (camera settings, measurement*, and display).*To take measurements with the camera, a calibration specimen is required (e.g., item no.: 5916710 or 5916720).The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and the mouse pointer are then not visible.Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for that. The USB port is only for controlling the camera with the mouse.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for direct connection to a monitor, TV, projector, or smartboardC-Mount thread for easy adaptability to various microscopes (manufacturer-independent)Compatible with USB sticks or SD card readers (max. storage size: 512 GB)No PC/laptop necessarySCOPE OF DELIVERY MICROSCOPE CAMERAMicroCam MINI Full HD HDMI with C-Mount connectionPower supply (12 V / 2A)USB mouseHDMI cable (approx. 1.5 m)The display in detailThe Full HD display is the ideal complement to the BRESSER MicroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MicroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows for observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! This allows multiple people to view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work is to be carried out under microscopic control.Many users also benefit from improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so cable clutter at the workplace is avoided.The mounting on a MicroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MicroCam PRO or MINILarge viewing angle (178°)No separate power supply necessarySCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

The well-designed combination set with the professional Science MTL-201 microscope and the high-resolution MikroCam Mini HDMI, together with the 13.3" monitor, offers a powerful complete solution for precise metallurgical examinations and diverse laboratory applications. The direct image transmission to the monitor enables comfortable live observation, vivid presentations, and efficient documentation - ideal for research and quality assurance.The Microscope in DetailThe BRESSER Science MTL 201 is a specialised reflected light microscope that allows the observation of non-transparent surfaces at higher magnifications (50x-800x). Ideal applications for this very solidly manufactured instrument include metallography (e.g. polished sections of metals and alloys), mineralogy, precision mechanics, electronics, and the semiconductor industry; it is suitable for scientific research and teaching as well as industrial production (e.g. quality control). According to its purpose, the MTL 201 features a very large stage (250 mm x 230 mm), which can be moved roughly with a handle and finely with cross and longitudinal drives. For perfect focusing, coarse and fine focus (coaxial; approx. 70 µm/revolution) are available. The reflected light illumination is provided by a halogen bulb (20 W) with adjustable light intensity through the objective. A centring field diaphragm, a selection of filters (yellow, green, blue, matte), and a polariser/analyser combination are available to the observer. The five-position turret is equipped with planachromatic DIN objectives (5x, 10x, 20x, 40x, 80x). The trinocular microscope head carries the eyepiece tubes inclined at 30° and the photo tube. The widefield eyepieces (WF10x) are adjustable for eye distance and dioptre difference. The photo tube allows digital image capture, e.g. via an optionally available PC eyepiece. Additional optional accessories: eyepiece (WF16x), measuring eyepiece (WF10x), planachromatic objective (50x).The BRESSER Science MTL 201 is a specialised reflected light microscope that enables surface examinations of metals or plastics. It is therefore excellently suited for quality testing or tissue examination.MICROSCOPE SCOPE OF DELIVERYMicroscopeEyepieces (2 pieces WF 10x)Objectives (5x, 10x, 20x, 40x, 80x)Coaxial cross tableColour filters (green, blue, yellow, matte)Dust coverPower cableThe Microscope Camera in DetailThe MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector or smartboard. This makes it ideal for use in teaching. Alternatively, a small BRESSER monitor can be mounted directly on the camera (see item no. 5914120).The HDMI connection is easy to make and the camera is ready for use immediately. No software installation, PC setup, etc. is necessary. Thanks to the lossless data transmission, very good image quality is achieved and the image is always displayed with a consistently high frame rate of 60 fps and without delay. This is particularly advantageous when a microscope workstation is to be digitised, e.g. in quality control or production.The supplied USB mouse is connected for control. This allows the three menus (camera settings, measurement* and display) to be controlled.*To perform measurements with the camera, a calibration slide is required (e.g. item no.: 5916710 or 5916720).The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and mouse pointer are then not visible.Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for this. The USB port is only for controlling the camera with the mouse.MICROSCOPE CAMERA FEATURESHDMI connection for direct connection to a monitor, TV, projector or smartboardC-mount thread for easy adaptability to various microscopes (manufacturer-independent)Compatible with USB sticks or SD card readers (max. storage size: 512 GB)No PC/laptop necessaryMICROSCOPE CAMERA SCOPE OF DELIVERYMikroCam MINI Full HD HDMI with C-mount connectionPower supply (12 V / 2A)USB mouseHDMI cable (approx. 1.5 m)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and simultaneously view the image on the monitor. The display delivers optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. Displaying via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are unpleasant for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable short, angled HDMI cable is also included to avoid cable clutter at the workstation. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.DISPLAY FEATURES16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINIWide viewing angle (178°)No separate power supply necessarySCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Allen keyOperating instructions

The class set, consisting of 15 devices, of the Erudit DLX microscope with a magnification of 40x to 600x includes ten identical devices. These robust and powerful microscopes are ideal for school use and allow all learners a detailed and practical observation of the micro-world. A perfect companion for illustrative and modern biology or science lessons.The microscope in detailThe BRESSER Erudit DLX is a high-quality study microscope for various applications, e.g. in school, in studies, or as a hobby. The dimmable LED lighting of the Erudit DLX and a centrable and height-adjustable condenser (with iris diaphragm and filter holder) allow for optimal illumination. The achromatic DIN objectives ensure very good imaging. The 40x- and 60x-objectives are spring-loaded to prevent damage to the specimen. The microscope features a 360° rotatable monocular eyepiece, coarse and fine focusing, as well as a coaxial stage with Nonius.FEATURES OF THE MICROSCOPEType: Biological microscopeEyepiece: MonocularComfortable view, 360° rotatable headApplications: Biology, Botany, EducationLighting: LED, adjustable condenserTarget group: Beginners, AdvancedCoaxial stageIntegrated dimmerEyepiece: 10x with pointerObjectives: 4x, 10x, 40x, 60xMagnification: 40x, 100x, 400x, 600xSCOPE OF DELIVERY OF THE MICROSCOPEMicroscopeEyepiece 10x4 objectives (4x, 10x, 40x, 60x)Abbe condenser with iris diaphragm and filter holderBlue filterDust coverPower supply

The powerful combination set with the professional Science ADL-601P microscope, the high-performance MikroCam PRO HDMI 5MP, and the matching display offers a comprehensive solution for demanding brightfield and darkfield observations. Ideal for modern laboratory use, it enables comfortable live presentation, precise analysis, and efficient documentation – perfect for research and quality control.The Microscope in DetailThe BRESSER Science ADL 601 P is a professional brightfield and darkfield microscope. The microscope base features a halogen transmitted light illumination (20 W) as well as the power supply and the two continuously adjustable dimmers for brightfield and darkfield. The two trinocular microscope heads combine both illumination functions, as well as the possibilities for photography and binocular observation; the inclination of the eyepiece tubes is 30°. With the polarization attachment, material science or apparatus technical investigations can be carried out in research, teaching, and production. The halogen brightfield illumination (20 W), which goes through the objective onto the specimen, can be modified for special applications using a color filter wheel and a polarizer/analyzer combination. Overall, the BRESSER Microscope Science ADL 601P is a uniquely priced instrument that also features the further equipment typical for high-quality microscopes: four-objective turret, cross table with transverse and longitudinal movement, coaxial focusing drives (fine: 200 µm/revolution), eyepiece distance and diopter adjustment, as well as a photo tube. Optional general accessories include wide-field eyepieces (WF10x, WF16x), measuring eyepiece (WF10x), various plan achromatic DIN objectives (e.g., 4x, 5x, 10x, 20x, 40x spring-loaded, 60x spring-loaded, 100x oil spring-loaded), the Abbe condenser (numerical aperture 1.25; with iris diaphragm and additional lens), darkfield condensers (dry and oil), immersion oil, and a phase contrast device.The Science ADL-601P combines a biological transmitted light microscope with a brightfield microscope. This also allows for the examination of surfaces at the highest resolution!SCOPE OF DELIVERY MICROSCOPEMicroscopeEyepieces (pair DIN WF 10x)Objectives (PL5x, PLL10x, PLL40x, PLL60x)Abbe condenser (1.25 with iris diaphragm)The Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality while also being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images.For high-resolution micro photos, this camera features a high-quality Sony 5MP sensor, allowing images and videos to be saved on SD card with higher resolution than Full HD.The operation of the camera functions is done via mouse directly on the screen menu. Through the screen menu, measurements can now also be performed, turning your microscope with the MikroCam Pro HDMI 5MP into a fully-fledged digital measuring microscope.Additionally, the camera can also provide the microscope view in a wireless network via WiFi module. However, a connection to the PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.The professional software MikroCamLabII is still included, allowing images to be edited and evaluated later with the software.Software for image evaluation included in the following languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseSimplified ChineseTraditional ChineseThe software features numerous functions for image processingMeasurement function (additional object micrometer required, e.g., Bresser Art. No. 5916720): lengths, angles, areas (polygons, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range)FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or televisionBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY MICROSCOPE CAMERAMikroCam Pro HDMI 5MP with C-Mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen provides brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows for observation independent of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable short angled HDMI cable is also included, so that cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply requiredSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyOperating instructions

The New BRESSER Science TFM-201 is a binocular microsscope, which is equipped with semiplan objectives. The WF 10x eyepieces offer a large visual field of 20mm. The interpupillary distance can be adjusted from ca. 55mm to 75mm. Dioptre adjustments are possible with both eyepieces.The Köhler illumination is regulable with the built-in luminous-field diaphragm and the vertically and horizontally adjustable Abbe condenser (numerical aperture 1.25, with iris diaphragm). An imprint of the different possible magnifications on the condenser makes the adjustment of the iris diaphragm very fast and precise.Coaxial pinions drive the stage and focus which enables ergonomic operation of the microscope.SCOPE OF DELIVERYMicroscope with integrated LED illuminationsemiplan objectives (4x, 10x, 40x, 100x oil)2x eyepieces (WF 10x)Immersion oilDust coverMains adapterManual

This high-quality combination set, consisting of the professional Science TRM-301 microscope, the MicroCam Mini HDMI, and the matching 13.3" HDMI monitor, offers a complete solution for modern laboratory use and impressive presentations. It combines precise microscopy with crystal-clear live image transmission – ideal for research, teaching, and demonstrations. For a larger camera field of view, a 0.5x reduction lens and a corresponding adapter are also included.The Microscope in DetailThe BRESSER Science TRM-301 is a trinocular transmitted light microscope of top quality: Excellent image reproduction, good ergonomics, high stability, and an appealing design characterize it. As a fully functional laboratory microscope, it finds wide applications in medicine, biology, agriculture, and industry. It is also highly recommended for the dedicated hobby microscopist as a ''microscope for life''.A particularly important feature of the TRM-301 is its ability for so-called Köhler illumination. Through this optimal specimen illumination, which is exceptionally bright, cool (specimen-friendly), uniform, glare-free, and high-contrast, the performance of the microscope optics is fully utilized. It therefore represents the standard in scientific work and microphotography. The Köhler illumination is adjustable with the fixed built-in aperture diaphragm and the height-adjustable and centrable Abbe condenser (numerical aperture 1.25; with iris diaphragm).Of course, the TRM-301 also features the other typical equipment for high-quality microscopes: with a cross table that moves both horizontally and vertically with Nonius scales, ergonomic coaxial focusing drives (the fine drive achieves 200 µm/revolution), stepless lamp dimmer, plan achromatic objectives (4x, 10x, 40x, 100x-oil spring), 10x wide-field eyepieces (in 30° inclined eyepiece tubes), inter-pupillary distance and diopter adjustment, as well as a photo tube.FEATURES OF THE MICROSCOPETransmitted light microscopeType of head: TrinocularMagnification: 40x - 1000x2 eyepieces: both WF 10x (23mm)4 objectives: 4x, 10x, 40x, 100x oilType of objectives: Plan achromaticCondenser: Abbe N.A. 1.25Illumination: 12V/30W halogen with dimmerSCOPE OF DELIVERY OF THE MICROSCOPEMicroscope2x eyepiece4x objectivecoaxial cross table with Nonius adjustmentImmersion oilDust coverPower supply 12V, 4AThe Microscope Camera in DetailThe MicroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required for operating the camera; you can simply connect the MicroCam MINI Full HD HDMI to an existing monitor, TV, projector, or smartboard. This makes it ideal for use in the classroom. Alternatively, a small monitor from BRESSER can also be mounted directly on the camera (see item no. 5914120).The connection via HDMI is easy to make, and the camera is ready for use immediately. No software installation, PC setup, etc. is necessary. Through lossless data transmission, very good image quality is achieved, and the image is always displayed with a consistently high frame rate of 60 fps and without delay. This is particularly advantageous when a microscope workstation, for example in quality control or production, needs to be digitized.To control the camera, the included USB mouse is connected. This allows you to control the three menus (camera settings, measurement*, and display).*To take measurements with the camera, a calibration specimen is required (e.g., item no.: 5916710 or 5916720).The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and the mouse pointer are then not visible.Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for that. The USB port is only for controlling the camera with the mouse.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for direct connection to a monitor, TV, projector, or smartboardC-Mount thread for easy adaptability to various microscopes (manufacturer-independent)Compatible with USB sticks or SD card readers (max. storage size: 512 GB)No PC/laptop necessarySCOPE OF DELIVERY OF THE MICROSCOPE CAMERAMicroCam MINI Full HD HDMI with C-Mount connectionPower supply (12 V / 2A)USB mouseHDMI cable (approx. 1.5 m)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MicroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MicroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual while simultaneously viewing the image on the monitor. The display provides optimal image quality with a large viewing angle of 178°! This allows multiple people to view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so cable clutter at the workplace is avoided. The mounting on a MicroCam PRO or MINI is done using two screws. Screws and tools are included in the delivery.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MicroCam PRO or MINILarge viewing angle (178°)No separate power supply necessarySCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyOperating instructions

The powerful combination set with the professional Science ADL-601P microscope, the high-performance MikroCam PRO HDMI Autofocus, and the matching screen offers a comprehensive solution for demanding brightfield and darkfield observations. Ideal for modern laboratory use, it enables comfortable live display, precise analyses, and efficient documentation – perfect for research and quality control.The Microscope in DetailThe BRESSER Science ADL 601 P is a professional brightfield and darkfield microscope. The microscope base contains a halogen transmitted light illumination (20 W) as well as the power supply and the two continuously adjustable dimmers for brightfield and darkfield. The two trinocular microscope heads combine both illumination functions, as well as the possibilities for photography and binocular observation; the inclination of the eyepiece tubes is 30°. With the polarization attachment, material science or apparatus technical investigations can be carried out in research, teaching, and production. The halogen brightfield illumination (20 W), which goes through the objective onto the specimen, can be modified for special applications using a color filter wheel and a polarizer/analyzer combination. Overall, the BRESSER Microscope Science ADL 601P is a uniquely priced instrument that also features the further equipment typical for high-quality microscopes: four-objective turret, cross table with transverse and longitudinal movement, coaxial focusing drives (fine: 200 µm/revolution), inter-pupillary distance and diopter adjustment, as well as a photo tube. Optional general accessories include wide-field eyepieces (WF10x, WF16x), measuring eyepiece (WF10x), various plan achromatic DIN objectives (e.g., 4x, 5x, 10x, 20x, 40x spring-loaded, 60x spring-loaded, 100x-oil spring-loaded), the Abbe condenser (numerical aperture 1.25; with iris diaphragm and additional lens), darkfield condensers (dry and oil), immersion oil, and a phase contrast device.The Science ADL-601P combines a biological transmitted light microscope with a brightfield microscope. This also allows for the examination of surfaces at the highest resolution!SCOPE OF DELIVERY MICROSCOPEMicroscopeEyepieces (pair DIN WF 10x)Objectives (PL5x, PLL10x, PLL40x, PLL60x)Abbe condenser (1.25 with iris diaphragm)The Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality while being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images. Due to its very high light sensitivity, good image quality is ensured even in low light. This model is especially recommended for darkfield or phase contrast.The autofocus allows for optimal focusing of the camera without using the microscope's focusing wheels. This ensures parfocality on various trinocular microscopes. The focusable range extends from the 0 position, corresponding to the C-Mount distance, over a maximum forward focus of 5.4 mm, thus also reaching the CS-Mount distance and additionally up to 10.6 mm inward to cover an even larger range. Besides autofocus, the camera can also be manually focused using a mouse. A focus adjustment to a specific area is also possible.The operation of the camera functions is done via mouse directly on the screen menu. Measurements can be performed via the screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully-fledged digital measuring microscope.The MikroCam PRO HDMI Autofocus offers a variety of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine visionThus, the MikroCam PRO Autofocus is excellently suited as an industrial camera with a very good price-performance ratio.Additionally, the camera can also provide the microscope view in a wireless network via WiFi module. If the camera is connected via HDMI, images and videos can be recorded directly on an SD card (not included). However, a connection to the PC via USB is no longer provided for this model. For this purpose, we recommend the MikroCam Pro HDMI model 5914180.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (*Object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-Mount distance) to 10.6 mm1/4" tripod thread e.g. for a photo tripodC-Mount thread: for easy adaptability, also suitable for C-Mount objectivesSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY MICROSCOPE CAMERACamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. Thus, observation can be done independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be operated with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so that cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

The NIB 630 is the flagship of the NIB600 series of inverted microscopes. With such an inverted design, the device enables the microscopy of plankton, microalgae and cell cultures. Cell cultures can be examined directly in the culture vessel without taking samples. For particularly easy sample handling, it is equipped with a tiltable lighting unit. This means that even tall vessels can be placed comfortably without bumping against the lighting unit. The microscope head is equipped with a height-adjustable ergo viewing head. This allows users of different heights to adjust the microscope to a comfortable and ergonomic viewing height with a single hand movement. This special microscope is used in water management offices, research institutes and universities, in human and veterinary medicine, agriculture, marine biology, limnology, aquaculture and many more. The integrated display informs you at any time about the selected magnification and the status of the illumination as well as the ECO mode. The brightness can be programmed for each objective so that there is no need to readjust when changing magnification and the user is not blinded. OBJECTIVE The NEXCOPE NIB630 microscope is equipped with a quintuple nosepiece. A 4x planachromatic objective and one each of 10x, 20x and 40x planachromatic phase contrast objectives are included. The condenser has a numerical aperture of 0.3 and an extra long working distance. The objectives are calculated for a soil thickness of 1.2 mm. Please use appropriate culture vessels. The universal specimen holder is suitable for standard slides. EYEPIECES The eyepieces have a field of view of 22 mm. This gives you a very large field of view. The high eye point makes them very comfortable even for spectacle wearers. A rubber edge protects against scratches on contact. Dioptric compensation from -5 to +5 can be individually adjusted for each eyepiece. The interpupillary distance can be adjusted between 48 mm and 75 mm. The binocular can be tilted up and down to adjust the viewing height. ILLUMINATION The Koehler illumination provides the best possible light guidance of the microscopy light. This avoids stray light and only illuminates the just visible area in the specimen. This protects sensitive living specimens from excessive light irradiation. The powerful 3W LED can be adjusted in brightness and ensures optimal illumination. The brightness can be adjusted individually for each objective. If an objective is changed, the NEXCOPE NIB630 automatically adjusts the previously set brightness. The display shows the currently selected lens and the current brightness. The tiltable lighting unit makes it easier to work with taller sample vessels. The adjustable condenser with extra-long working distance enables quick readiness for use. MECHANICS In addition to coarse focusing, fine focusing helps to bring the specimen into focus very precisely. A full turn of the fine focusing knob moves the stage up or down by 0.2 mm. On the right side, the fine focus can be adjusted with a finger. The friction of the coarse focusing can also be varied. The fine focusing knobs are held magnetically and can be mounted on the left or right. The XY stage offers the possibility of inserting various holders. This allows slides or even petri dishes to be inserted. CAMERA CONNECTION The NEXCOPE NIB630 is specially designed for use with C-mount cameras. The camera connection is located on the side and has a switch between visual observation and camera (100/0 or 0/100). You can choose from two different adapters, depending on the sensor size: 0.5x C-mount adapter 1x C-mount adapter (already included in the scope of delivery) ACCESSORIES (optional) Hoffman Modulation Contrast Relief 3D contrast Terasaki holder, Petri dish holder 54 mm and 90 mm Camera adapter for C-mount 0.5x FEATURES Professional inverted transmitted light microscope Type of objectives: infinity plan achromatic (60 mm adjustment length, M25) Precise mechanics Very bright illumination SCOPE OF DELIVERY Inverted transmitted light microscope 4x objectives, of which 10x, 20x and 40x as phase contrast objectives Filter slider for phase contrast Universal sample holder Centering telescope for phase contrast

Because of its large swing range and very large working distance the BRESSER Biorit ICD CS offers an excellent basis for various observations. It is the perfect choice for fine handiwork, e.g. soldering of SMD components.FEATURESstereo microscope with large swing range and high working distanceLED illumination/AC Powerworking distance (approx.): 230 mm / swing arm: 210 mmobject height: 70 mmSCOPE OF DELIVERYstereomicroscopedust cover2 pairs of eyepieces, WF 10x / WF 20x1 pair of rubber eyecupspower cable

A digital microscope easily brings the microcosmos up on the screen. For a long time, these instruments were common only in the beginner's range. Now, the successful and proven Researcher series makes the step into the digital microscopy world and offers new options for microscopy in schools, for hobby or work. The optics and mechanics is the same as already well estabished in the Researcher Bino and Researcher Trino microscopes. Incuding 4 DIN objectives, Abbe condenser, coaxial fine focus and crosstable, the Researcher LCD is suitable for use in the microscopy hobby as well as in teaching or other work related applications. The highest magnification when using the 60x objective (compares to 600x on non digital microscopes) is high enough to view small microorganisms as microalgae, flagellates and bacteria. Other magnifications (20x, 100x oil) can be added later. The Researcher LCD is also compatible with our plan-achromatic objectives designed for 160mm optical tube length.The integrated, modern Sony camerasensor IMX206 with 16MP gives a brilliant image with good contrast on the monitor. The user can change settings and capture images and video conveniently with the touch screen. Images with 16MP and Full HD video can be stored directly on SD card (SD card not supplied). The microscope also has a HDMI connection, so the image is easily shown on a big monitor, TV, beamer or smartboard. The results can be shared with a bigger audience in lectures or teaching. FEATURESDigital microscope with integrated 7'' touchscreen 4 achromatic DIN objectives (RMS thread connection), parfocal length 45mm Objective magnifications of 4x, 10x, 40x, 60x (40x and 60x with specimen protection) Abbe condenser with iris diaphragm, fully adjustable and height adjustable High-contrast screen with natural colours, 1024x600px resolution Integrated Sony IMX206 camera sensor with 16MP HDMI port for connection to an external monitor SD card slot (supports up to 32GB, not included) USB port (for data transfer to SD card) SCOPE OF DELIVERYResearcher LCD Digital Microscope Set of 5 prepared slides and 5 blank slides Power adapter (EU) 5V 2A HDMI cable USB cable for transferring stored data to a PC Dust cover

The class set, consisting of 10 devices, of the Erudit DLX microscope with a magnification of 40x to 600x includes ten identical devices. These robust and powerful microscopes are ideal for school use and allow all learners to observe the microworld in detail and practically. A perfect companion for illustrative and modern biology or science lessons.The microscope in detailThe BRESSER Erudit DLX is a high-quality study microscope for various applications, e.g., in school, in studies, or as a hobby. The dimmable LED lighting of the Erudit DLX and a centrable and height-adjustable condenser (with iris diaphragm and filter holder) allow for optimal illumination. The achromatic DIN objectives ensure very good imaging. The 40x- and 60x-objectives are spring-loaded to prevent damage to the specimen. The microscope features a 360° rotatable monocular eyepiece, coarse and fine focusing, as well as a coaxial stage with Nonius. FEATURES OF THE MICROSCOPE Type: Biological microscope Eyepiece: MonocularComfortable view, 360° rotatable head Application areas: Biology, botany, education Illumination: LED, adjustable condenser Target group: Beginners, advanced users Coaxial stage Integrated dimmer Eyepiece: 10x with pointer Objectives: 4x, 10x, 40x, 60x Magnification: 40x, 100x, 400x, 600x SCOPE OF DELIVERY OF THE MICROSCOPE Microscope Eyepiece 10x 4 objectives (4x, 10x, 40x, 60x) Abbe condenser with iris diaphragm and filter holder Blue filter Dust cover Power supply

Professional combination set for precise analyses and sharp image transmission: This powerful set combines the high-quality digital microscope DST-0745 with the modern MikroCamII 12MP camera into an optimally coordinated unit. Ideal for detailed observations, high-resolution live displays, and reliable visual documentation of your work results.The microscope in detailThe BRESSER DST-0745 is a special microscope that operates with a C-Mount camera (not included). Thus, direct viewing on a screen is possible. Due to the vertically mounted optics, there is no image shift when focusing. This is particularly advantageous for "focus stacking" shots.The zoom is continuously adjustable from 0.7x to 4.5x. A coarse and fine focus makes it easier to sharpen, especially at high magnifications.Due to the convenient and user-friendly operation, the digital microscope is particularly suitable for daily use in the workshop. Measurements, quality controls of surfaces, or checking components and raw materials become easy with the workshop microscope. Insects, plants, and rocks are also impressively displayed.The DST-0745 workshop microscope is not suitable for visual observation, as it is only a zoom lens. It is used in conjunction with a MikroCam C-Mount.It is designed for camera sensors of about 1/2".With the two flexible incident light lamps, the light can be optimally positioned.The transmitted light illumination helps in observing transparent objects. The brightness of both illuminations can be adjusted in five levels.The magnification of a USB camera differs from the objective magnification. Therefore, a total magnification of the digital system cannot be specified. It depends on the sensor size and the display on a monitor.Compatible MikroCam cameras:5914122 MikroCam SF Full HD5914321 MikroCam SP 3.1 MP5914520 MikroCam SP 5.0 MP5914522 MikroCam SF 5.0 MP5914822 MikroCam SF UHD5914912 MikroCamII 12MP USB 3.05914170 MikroCam MINI Full HD HDMI5914185 MikroCam PRO HDMI 5MP5914190 MikroCam Pro HDMI AutofocusFEATURES OF THE MICROSCOPEDesigned for C-Mount microscope camerasUp to 1/2" sensor size is suitableMax. object height: 190 mmContinuously adjustable zoom (0.7x - 4.5x)Two flexible LED incident light lampsLED transmitted light illuminationAdjustable brightnessSCOPE OF DELIVERY OF THE MICROSCOPEZoom objective head 0.7x - 4.5xStand with incident and transmitted light illuminationGlass object plate (one side frosted)Plastic object plate (one side white, one side black)Power supply, user manual, dust coverThe microscope camera in detailThe BRESSER MikroCam II cameras allow for easy capturing of photos and videos with a microscope.The modern Sony® CMOS sensors deliver brilliant colors with very low image noise and are thus the perfect solution for applications where natural color reproduction is important. The included capture software allows for numerous settings when capturing still images and videos. An integrated measurement function* allows for measurement already in the live image. The software included supports the following languages: German, English, French, Polish, Turkish, Chinese.The housing features a C-Mount connection thread. For use on devices with a 23.2mm mount, an optional variable reduction lens 0.5x (Art. No. 5914005) is available. For special applications, the camera can also be mounted on the integrated 1/4'' tripod thread.The BRESSER MikroCamII is equipped with a USB 3.0 connection compared to the MikroCam SP, allowing for up to 8x higher data rates than with USB 2.0 connections. The cameras are thus capable of transmitting more than 25 images per second (depending on resolution, exposure time, and computer performance). This is particularly important for live microorganisms. The camera is exceptionally light-sensitive, allowing for work with short exposure times even at high magnifications or demanding contrast methods.FEATURES OF THE MICROSCOPE CAMERAHigh-quality metal housingMany software functions, such as measurement, focus stacking (to overlay multiple shots for increased depth of field), mosaic (to display larger image fields)Image and video capture, including time-lapse functionGood compatibility with various microscopesHigh-speed USB 3.0 connectionModern Sony® IMX226 sensor 7.53mm x 5.64mm (1/1.7'')SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 3.0, 3.1SCOPE OF DELIVERY OF THE MICROSCOPE CAMERACamera headUSB 3.0 cable23.2 mm adapter, 30 mm and 30.5 mmCapture and image editing software (for Windows)

The BRESSER Erudit DLX is a high-quality microscope for school, studies and hobby use. The LED illuminator and the height adjustable condenser (with diaphragm and filter holder) offer an optimal illumination. The achromatic DIN-objectives allow a very good image. The 40x and 100x objectives are resilient to save the preparation for damage. The microscope has a 360° rotatable monocular view coarse and fine focusing drive, and a coaxial mechanical desk with nonius. FEATURES Type: Biological microscope View: Monocular Comfortable view, 360° turnable head Application range: Biology, Botany, Education, Teaching Illumination: LED, adjustable condenser Level: Beginner, Intermediate coaxial mechanical stage Integrated dimmer Eyepiece: 10x with pointer Objectives: 4x, 10x, 40x, 60x Magnifications: 40x, 100x, 400x, 600x SCOPE OF DELIVERY Microscope body eyepiece 10x 4 objecitves (4x, 10x, 40x, 60x) Abbe condenser with field diaphragm and filter holder blue filter dust cover power supply

The BRESSER Analyth STR 10x - 60x Stereo Reflected and Transmitted Light Microscope features 3 different objective magnifications (1x, 2x, 3x), which can be easily switched by rotating the objective. This allows for magnifications of 10x, 20x, 30x, 40x and 60x. Two eyepiece pairs with 10x and 20x magnification are included. They are secured with a small screw to prevent them from falling out. The stereo design provides a particularly vivid and three-dimensional view of structured objects. The low initial magnification of 10x is especially suitable for working with children. This allows objects up to 20 mm in size to be viewed in full. The Analyth STR is therefore extremely versatile. It is suitable for insects, plants, minerals and much more, and can be used for hobbies, in schools and in professional settings. Of course, the stereo microscope can also be used for quality control, in horticulture and agriculture, for water analysis and many other applications. Interpupillary distance and dioptre adjustment can be set individually. The eyepieces offer a large field of view and can be fitted with rubber eyecups. The microscope can be powered either via the mains adapter or with 3 AA batteries (not included). Thanks to the practical carrying handle, it can be used on the go – for example, in the garden or during field trips. FEATURES Microscope with 5 magnifications: 10x, 20x, 40x, 60x Wide-field eyepieces with rubber eyecups and 20 mm field of view Bright, energy-efficient LED illumination, adjustable angle Illumination for reflected and transmitted light can be switched separately Dimmer via membrane buttons with status indicator Two stage plates (black/white and frosted glass), stage clips SCOPE OF DELIVERY Microscope with 3 objective pairs: 1x, 2x, 3x Metal stand with LED illumination, power supply and battery compartment 2 eyepiece pairs (10x, 20x) 1 pair of rubber eyecups Glass stage plate Plastic stage plate (black/white) Dust cover Instruction manual

The BRESSER USB Digital Microscope DST-1028 5MP enables easy and convenient observation of your specimen on the computer with detailed images. The digital handheld microscope is especially suitable for examining material samples, circuit boards and electronic components, but also plants, insects and much more. In addition to applications in school and hobby, the digital microscope is also suitable for tasks in quality assurance. The device features high-quality optics with continuous zoom. This enables documentation of the specimen between 10x and 280x magnifications. Depending on the object to be examined, the appropriate magnification can always be selected. With its ring light, the digital incident light microscope ensures optimal illumination and high-contrast images of your specimen. The ring light consists of eight LEDs. The brightness can be conveniently controlled with the dimmer, which is integrated in the USB connection cable. The microscope has a stable, adaptable metal stand, which can be adjusted in height depending on the object height and magnification used. This makes it possible to examine both larger and very flat objects (e.g. printing documents). At low magnifications, the working distance is 110 mm, so that working with tools, e.g. for preparation, is possible underneath. ​ FIELDS OF APPLICATIONQuality assuranceIndustryForensics (evidence material, authenticity testing)Scientific examinations (e.g. surfaces and structures)Jewellery collectibles and watchesPlants and plants diseases, pets e.g. in horticulture and agriculture FEATURESDigital USB incident light microscope with LED ring lightHigh-quality optics with continuous zoomGenerous working distance for larger objectsSolid metal construction Cable length: 1,2 mImage fields: 10x: 42 x 32 mm / 100x: 4,2 x 3,2 mm / 280x: 1,6 x 1,2 mmMax. object height: 10x – ca. 45 mm / 100x – ca. 160 mm / 280x – ca. 170 mm SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYDigital microscope incl. software download (for Windows only)Integrated USB port with adjustment wheel for light intensitymetal stand with integrated focusingExtension for tripod

The BRESSER Erudit Basic Mono is a versatile biological microscope. With its high quality optics it is the perfect choice for use in school or hobby. With battery powered LED lighting it can be used anywhere, e.g. for fieldwork or excursions. The microscope can be used on a great variety of subjects, for example thin sections, pond life, or blood smears. It is also a useful tool to look at parasites of pets and livestock (coccidia, helminths, skin and fur parasites).Three magnifications (40x, 100x, 400x) deliver good resolution to see small details. There is no need to work with immersion oil. The achromatic DIN objectives deliver sharp images with nice detail. The 40x objective is spring loaded to minimize the risk of damage to specimen or objective. The BRESSER Erudit Basic mono comes with a sturdy case for transport and storage, as well as with a smartphone holder for easy and convenient documentation of microscopic images and video.FEATURESType: Biological microscope, transmitted lightApplication: BiologyBattery powered long life LED light for mobile useCoarse and fine focus, coaxialCoaxial mechanical deskAdjustable Abbe condenser with diaphragm and filter holderComfortable eyepiece tube, 360° rotatableSturdy carry caseSPECIFICATIONSMagnifications: 40x, 100x, 400xAchromatic DIN-ObjectivesEyepiece barrel diameter 23,2mm, field number 18mmBattery powered LED lightSCOPE OF DELIVERYMicroscope body with LED lightWF 10x eyepieceAchromatic DIN-Objectives (4x, 10x, 40x)Abbe-Condenser N.A. 1,25, adjustable, with diaphragm and filter holderSmartphone holderCarry caseBox with preparations, empty slides and cover glasses

The Analyth STR comes with 3 different magnifications, that can easily be switched by turning the objective. It is easy to change magnifications from 10x to 20x or 40x. The stereo microscope will show structured objects nicely in 3D, which is especially impressive. The low starting magnification of 10x is helpful when working with children and will show objects in full up to a size of 20mm. With the wide magnification range, the Analyth STR is a versatile instrument. You can use it to view insects, plants, minerals and much more. It is useful for hobbyists, in schools and more. Typical professional applications include quality control, gardening or farming (pest control), hydrobiology and much more.The interpupilllary distance and the diopters can be adjusted to your needs. The eyepieces feature a big field of view of 20mm. They are equipped with rubber eyecups and have a locking screw to prevent loss or damage during transport.The power supply can be achieved through the AC adapter or with a set of 3 AA type batteries (batteries not included). This makes the microscope  perfect for mobile use, e.g. outside in the garden or for biology field work. FEATURES Microscope with 3 pairs of objectives, magnifications 10x; 20x; 40x Wide field eyepieces with eyecups and 20mm field of view Bright, economical LED illumination, angle adjustable Illumination for incident and transmitted light can be switched separately Dimmer operation via a foil switch with status display Two specimen plates (black/white or glass matt), with specimen clips SCOPE OF DELIVERY Microscope with 3 objective magnifications 1x; 2x; 4x Metal stand with LED illumination, power supply and battery compartment 2 eyepieces with rubber eyecups Glass object plate Plastic object plate (black/white) Dust cover Operating instructions

Fascinated by the world of tiny wonders? Discover the intricate microcosm with the NATIONAL GEOGRAPHIC Stereo Microscope. This incident light microscope illuminates your specimens from above, making it incredibly easy to get started. Simply place your sample on the stage, switch on the LED lighting, and begin exploring. You'll be captivated by the details that emerge when viewed through the 20x magnification stereo microscope. The two objectives and binocular view create a striking 3-dimensional effect, enhancing your experience. Not sure where to begin? Kick off your explorations with the included set of 12 mineral samples. Take the microscope on any outdoor adventure Always on the go with friends, discovering new things? The portable and ultra-light microscope is your perfect companion and not limited by power outlets thanks to its battery operation (batteries not included). Beetles, grass, sand, droplets, leaves – whatever you find, you can examine on the spot. The interpupillary distance is easily adjustable to suit each user. And when your curiosity is momentarily satisfied, your stereo microscope will be safely stored under the robust dust cover, ready for your next adventure. Uncover nature's tiny secrets with the NATIONAL GEOGRAPHIC Stereo Microscope. Included Rock Specimens:Shale Granite Pencil Stone Gesso Marble Snake Stone Calcite Quartz Phosphorite Grey Limestone Plant Fossil Gritstone FEATURES Suitable for children aged 6 and above Binocular view LED incident light 2x objectives (stereo) WF-10x oculars (stereo) 20x magnification Runs on 2x 1.5 V AA batteries (not included) Adjustable interpupillary distance SCOPE OF DELIVERY Stereo microscope 12 mineral samples in a plastic box Protective dust cover Instruction manual

The Researcher Bino is a professional microscope with transmitted illumination, equipped with brilliant optics, a robust metal body and precise workmanship. It is perfect for use in school, studies, and occupation. The comfortable binocular head provides an exceptional bright image and can be individually adjusted according to the observer's needs. The objective turret, is fitted with 4 DIN objectives and offers a large variety of magnification possibilities. Focussing is done through the use of the coarse and fine adjustment wheels. The illuminator and the double-lens condensor with iris diaphragm guarantee the perfect illumination of the observed object. Features • Type: Biological microscope • View: Binocular Comfortable binocular view, 360° turnable head • Application range: Biology, Botany, Education, Teaching, Entomology • Illumination: LED Transmitted • Level: Intermediate, Expert • Warranty: 5 years • Double-lens condensor with iris diaphragm • Incl. mechanical stage • Adjustable eye relief Specifications • Magnifications: 1000x max, 40-1000x Zoom • Eyepieces: WF 10x • Eyepiece diameter: 23.2 mm • Objectives: 4x, 10x, 40x, 100x (oil immersion) • Power supply: 220/240V Included Accessories • 4 DIN-objectives • 1x2 eyepieces • Mechanical stage • Condensor • Binocular head • Immersion oil

This high-quality combination set, consisting of the professional Science TRM-301 microscope, the powerful MikroCam PRO HDMI Autofocus, and the matching 13.3" HDMI monitor, offers a complete solution for modern laboratory use and impressive presentations. It combines precise microscopy with crystal-clear live image transmission – ideal for research, teaching, and demonstrations.The Microscope in DetailThe BRESSER Science TRM-301 is a trinocular transmitted light microscope of top class: Excellent image reproduction, good ergonomics, high stability, and an appealing design characterize it. As a fully usable laboratory microscope, it finds wide applications in medicine, biology, agriculture, and industry. It is also highly recommended for the dedicated hobby microscopist as a 'microscope for life'.A particularly important feature of the TRM-301 is its ability for so-called Köhler illumination. This optimal specimen illumination, which is exceptionally bright, cool (specimen-friendly), uniform, glare-free, and high-contrast, fully utilizes the performance of the microscope optics. It therefore represents the standard in scientific work and microphotography. The Köhler illumination is adjustable with the fixed built-in aperture diaphragm and the height-adjustable and centrable Abbe condenser (numerical aperture 1.25; with iris diaphragm).Of course, the TRM-301 also features the further typical equipment for high-quality microscopes: with a cross table that moves transversely and longitudinally with Nonius scales, ergonomic coaxial focusing drives (the fine drive achieves 200 µm/revolution), stepless lamp dimmer, plan achromatic objectives (4x, 10x, 40x, 100x-oil spring), 10x wide-field eyepieces (in 30° inclined eyepiece tubes), inter-pupillary distance and diopter adjustment, as well as a photo tube.FEATURES OF THE MICROSCOPETransmitted light microscopeHead type: TrinocularMagnification: 40x - 1000x2 eyepieces: both WF 10x (23mm)4 objectives: 4x, 10x, 40x, 100x oilObjective type: Plan achromaticCondenser: Abbe N.A. 1.25Illumination: 12V/30W halogen with dimmerSCOPE OF DELIVERY OF THE MICROSCOPEMicroscope2x eyepiece4x objectivecoaxial cross table with Nonius adjustmentImmersion oilDust coverPower supply 12V, 4AThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality while being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images. Due to its very high light sensitivity, good image quality is ensured even in low light. Thus, this model is especially recommended for dark field or phase contrast.The autofocus allows optimal focusing of the camera without using the microscope's focusing wheels. This ensures parfocality on various trinocular microscopes. The focusable range extends from the 0 position, corresponding to the C-Mount distance, over a maximum forward focusing of 5.4 mm, thus also reaching the CS-Mount distance and additionally up to 10.6 mm inward, to cover an even larger range. Besides autofocus, the camera can also be manually focused using a mouse. A focus adjustment to a specific area is also possible.The operation of the camera functions is done via mouse directly on the screen menu. Measurements can be performed via the screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully-fledged digital measuring microscope.The MikroCam PRO HDMI Autofocus offers a variety of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine visionThus, the MikroCam PRO Autofocus is excellently suited as an industrial camera with a very good price-performance ratio.Additionally, the camera can also provide the microscope view in a wireless network via a WiFi module. If the camera is connected via HDMI, images and videos can be recorded directly on an SD card (not included). However, a connection to the PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (*Object micrometer Art. No. 5916720 necessary for calibration)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-Mount distance) to 10.6 mm1/4" tripod thread, e.g., for a photo tripodC-Mount thread: for easy adaptability, also suitable for C-Mount objectivesSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY OF THE MICROSCOPE CAMERACamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. Thus, observation can be done independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so that cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyOperating instructions

The BRESSER Science ETD-301 is a stereo incident light and transmitted light microscope with high-quality optics.It is suitable for use in medicine, agriculture, forestry, forensics, scientific research institutes and schools as well as for the assembly and inspection of small components in precision mechanics and electronics.The particularly wide base with object table enables the viewing of larger objects. The maximum object height is approx. 85 mm. The large working distance of 100 mm allows working with tools, e.g. for dissecting, measuring or testing.The instrument has an LED incident light and a transmitted light illumination, which can be used individually or combined and each can be infinitely adjusted. The incident light angle can be adjusted in a particularly user-friendly way. With interchangeable wide-field eyepieces (WF10x) and a 9x stereo zoom lens (0.7x-6.3x), a continuous magnification range from 7x to 63x is realised.The coarse and fine focusing allows precise focusing, especially at high magnifications and in photography.The interpupillary distance and dioptric compensation are individually adjustable. The trinocular microscope head can be rotated 360° and has two 45° inclined eyepiece tubes.The trinocular tube can carry an SLR/system camera (APS-C or DX format) or a c-mount camera (sensor size up to 1") using an optional adapter. By means of a switch, the beam path of one eyepiece is deflected towards the camera. This provides 50% more light than a microscope with a permanent beam splitter.To connect an SLR or system camera, the adapter with item no. 5942100 and a camera-specific T2 ring are required.A c-mount camera is connected with the optional adapter item no. 5942101. FEATURESWF 10x eyepieces with 22 mm field of view (referring to a 1x objective)Large, continuous 9x zoom (7x - 63x magnification)With optional adapter suitable for SLR/system cameras and c-mount camerasTripod with coarse and fine focusSCOPE OF DELIVERYMicroscope zoom headLED microscope standWF 10x eyepieces with 22mm field of view (2 pieces)Translucent plastic object plateAC adapter (12V 3A)dust cover