Präzise Jagen Eyepiece for Duo Connector with 2.5 Magnification
€199.00*
Eyepiece with 2.5 MagnificationOur eyepiece connects directly to the DUO connector via the integrated interface, enhancing your attachment device with a two-and-a-half times magnification. This allows for precise targeting of game even at greater distances without any issues. The total length of the eyepiece, including the eyecup, is 10.5 cm. Additionally, the eyepiece is compatible with the small closure cap. FEATURES2.5 magnification for precise targeting at greater distancesDirect coupling to the DUO connectorTotal length including eyecup: 10.5 cmCompatible with the small closure capRobust and durable constructionSCOPE OF DELIVERY1x Eyepiece with 2.5 magnification
Available
Präzise Jagen Clamping Sleeve 63,5 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Available
Präzise Jagen DUO Connector with M52x0.75 Connection Thread
€95.00*
The DUO connector features an internal thread in various sizes, allowing it to be screwed directly onto the connection thread of the clip-on device.
Thanks to the integrated locking mechanism, unwanted rotation of the clip-on device is reliably prevented no additional locking nut is required.
The DUO connector is compatible with all sizes of clamping sleeves.
This allows you to use your clip-on device flexibly on any rifle with a clamping sleeve mounted on the riflescope.
The DUO connectors are made from high-quality aluminium and are optimally protected against corrosion and wear by a hard anodised coating ideal for tough hunting use.
Special versions: Pard FT32: With bayonet interface, installation possible by the customer. Night Spotter Evo: Requires DUO connector M52x0.75 mm and the included spacer ring; if not available, please order item AR-NS. HIKMICRO Thunder TE19C, TH35 and Pro TQ 50C as well as Cheetah: Require DUO connector M52x0.75 mm and an adapter piece; from generation 2.0 with external thread, no adapter piece is required. Pulsar Forward FN455: Requires DUO connector M52x0.75 mm and a spacer ring (please contact sales). Liemke Merlin 13: Thread M30x1, adapter ring to M52 included in the scope of delivery; compatible with our DUO connector DV-M52.
FEATURES
Internal thread in various sizes for direct mounting on the clip-on device Integrated locking mechanism prevents rotation without additional nut Compatible with all sizes of clamping sleeves Flexible use on multiple rifles Made from high-quality aluminium Hard anodised coating for corrosion and wear protection Available for numerous devices such as Pulsar Core, Pard FT32, Night Spotter Evo, HIKMICRO, Pulsar Forward FN455 and Liemke Merlin 13
SCOPE OF DELIVERY
DUO connector in the selected version Installation instructions
Currently not available
Präzise Jagen Clamping Sleeve 62 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Available
Präzise Jagen Fusion Adapter for Alpen APEX LT 2–12x44 Gen 2
€150.00*
The new Fusion Adapter was specifically developed for the secure and precise mounting of clip-on devices onto the riflescope. Unlike the traditional clamping sleeve, the adapter is not pushed on but screwed directly onto the riflescope and secured using thread clamping. This results in an especially stable and play-free connection between the clip-on device and the optic.
Mounting can be carried out on the APEX LT 2–12x44 Gen 2. Thanks to its compact design, the Fusion Adapter is particularly suitable for combination weapons or setups with very limited space at the objective lens.
A major advantage is the significant weight saving compared to conventional adapter solutions. The reduced weight improves the weapon's balance, facilitates handling, and increases comfort during longer use. At the same time, the adapter is recoil-proof up to 1000G Magnum – making it perfectly suitable even for the most powerful calibres.
The precisely manufactured internal thread ensures exact alignment of the adapter on the riflescope. The integrated bayonet on the front guarantees absolutely repeatable positioning with each attachment and removal.
The Fusion Adapter is made from high-quality aluminium, which is reliably protected against corrosion and wear by a hard anodised coating. This combines maximum stability with a modern, lightweight design.
Advantages at a glance:
Screw-on system instead of clamping → extremely stable connection Significant weight saving for improved balance and handling Also ideal where space at the objective is limited (e.g. combination weapons) Recoil-proof up to 1000G Magnum Exact alignment and repeatable mounting through precision internal thread & bayonet Robust, corrosion-protected aluminium construction
We explicitly point out that a clip-on device may only be mounted on a weapon if permitted by the legislation of the respective country. Mounting is carried out at your own risk and responsibility.
FEATURES:
Compatible with APEX LT 2–12x44 Gen 2 Secure thread clamping Stable and play-free connection Compact design Recoil-proof up to 1000G Magnum High-quality aluminium with hard anodised coating
SCOPE OF DELIVERY:
Fusion Adapter User manual
Available
Präzise Jagen Clamping Sleeve 56 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Available
Präzise Jagen Duo Connector with Screen Positioning for Pulsar Krypton & Proton
€115.00*
The DUO connector features a special screen alignment with an M35x1 connection thread for Pulsar Krypton I & II as well as Pulsar Proton clip-on devices.
This ensures that the screen of the clip-on device is always precisely aligned with the optical axis of the riflescope for a perfect and repeatable point of impact.
The DUO connector is compatible with all sizes of clamping sleeves.
This means you can use your clip-on device on any rifle equipped with a clamping sleeve on the riflescope regardless of the objective diameter.
Made from high-quality aluminium and finished with a hard anodised coating, the DUO connector is optimally protected against corrosion and wear for a long service life even under the toughest hunting conditions.
FEATURES
M35x1 connection thread for Pulsar Krypton I & II as well as Pulsar Proton clip-on Precise screen alignment with the optical axis of the riflescope Compatible with all sizes of clamping sleeves Flexible use of the clip-on device on multiple rifles High-quality aluminium construction with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
DUO connector in the selected version Installation instructions
Available
Präzise Jagen Clamping Sleeve 51,5 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Available
Präzise Jagen Clamping Sleeve 50 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Available
Präzise Jagen Clamping Sleeve 30 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Available
Präzise Jagen Clamping Sleeve 57,5 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Available
Präzise Jagen Advanced Quick-Release Adapter 56 mm M52x0.75
€179.00*
The ADVANCED quick-release adapter is equipped with an integrated thread clamp and provides a fast, secure and precise connection for your clip-on device.
With a push-on length of 40 mm, the adapter fits perfectly to the riflescope while compensating for tolerances of ±0.2 mm.
Thanks to the integrated thread clamp, no additional locking ring on the clip-on device is required unwanted loosening of the connection is reliably prevented.
The ADVANCED quick-release adapter is fitted with a precise M52x0.75 thread, making it compatible with a wide range of modern clip-on devices.
FEATURES
High-quality ADVANCED quick-release adapter with integrated thread clamp Push-on length 40 mm Compensates for ±0.2 mm tolerance on the riflescope No locking ring on the clip-on device required Prevents unwanted loosening of the threaded connection Equipped with M52x0.75 thread Robust construction for hunting use
SCOPE OF DELIVERY
ADVANCED quick-release adapter M52x0.75 Installation instructions
Currently not available
Präzise Jagen Clamping Sleeve 66 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Currently not available
Präzise Jagen Dust Protection Plug for Duo Connector
€34.95*
Dust protection for the attachment deviceWith this dust protection plug, you can securely seal the back of the DUO connector. This ensures that the eyepiece side of your attachment device is reliably protected from dirt, moisture, and damage during transport.FEATURESProtects the eyepiece side of the attachment deviceSeals the back of the DUO connectorProtection against dust, moisture, and damageIdeal for secure transportEasy handlingSCOPE OF DELIVERY1x Dust protection plug for DUO connector
Currently not available
Präzise Jagen Flip-Cover Small (for Clamping Sleeves up to ø61)
€28.90*
Flip-Cover Small (for Clamping Sleeves up to Ø61)With the Flip-Cover, you reliably seal the front end of the clamping sleeve, thus protecting the lens of your riflescope from dust, moisture, and damage during transport. The cover is attached directly to the clamping sleeve via a sturdy clamping ring. Thanks to the precise construction, the cover clamps securely and can be opened and closed silently ideal for hunting use. The Small version is suitable for all clamping sleeves with a housing diameter of up to 61 mm.FEATURESProtects the lens from dust, moisture, and damageRobust mounting via clamping ringFixed directly on the clamping sleeveSilent opening and closingVersion for clamping sleeves with a housing diameter of up to 61 mmSCOPE OF DELIVERY1x Flip-Cover Small (for clamping sleeves up to Ø61 mm)
Currently not available
Präzise Jagen Clamping Sleeve 64 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Incoming
Präzise Jagen Advanced Quick-Release Adapter 65 mm M52x0.75
€179.00*
The ADVANCED quick-release adapter is equipped with an integrated thread clamp and provides a fast, secure and precise connection for your clip-on device.
With a push-on length of 40 mm, the adapter fits perfectly to the riflescope while compensating for tolerances of ±0.2 mm.
Thanks to the integrated thread clamp, no additional locking ring on the clip-on device is required unwanted loosening of the connection is reliably prevented.
The ADVANCED quick-release adapter is fitted with a precise M52x0.75 thread, making it compatible with a wide range of modern clip-on devices.
FEATURES
High-quality ADVANCED quick-release adapter with integrated thread clamp Push-on length 40 mm Compensates for ±0.2 mm tolerance on the riflescope No locking ring on the clip-on device required Prevents unwanted loosening of the threaded connection Equipped with M52x0.75 thread Robust construction for hunting use
SCOPE OF DELIVERY
ADVANCED quick-release adapter M52x0.75 Installation instructions
Currently not available
Präzise Jagen Clamping Sleeve 46 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Currently not available
Präzise Jagen Clamping Sleeve 51 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Currently not available
Präzise Jagen Clamping Sleeve 63,5 mm - low Scope - for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
Special “Low Scope” version, which offers more space towards the barrel root thanks to a recess. For extremely low-profile riflescopes.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection “Low Scope” version with recess for low-profile riflescopes Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Currently not available
Präzise Jagen Clamping Sleeve 41 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Currently not available
Präzise Jagen Clamping Sleeve 59,5 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Currently not available
Präzise Jagen Clamping Sleeve 57 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Currently not available
Präzise Jagen Clamping Sleeve 40 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Currently not available
