Skip to main content Skip to search Skip to main navigation

Black Rain Funnel

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • RISK OF SUFFOCATION! Improper use of this product can lead to suffocation, especially in children. Therefore, it is essential to follow the safety information below. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a suffocation risk! This product contains small parts that could be swallowed by children! There is a suffocation risk!
  • Risk of electric shock! This device contains electronic parts powered by a power source (power supply and/or batteries). Improper use of this product poses a risk of electric shock. An electric shock can cause serious to fatal injuries. Therefore, be sure to follow the safety information below. Never leave children unsupervised when handling the device! The device must only be used as described in the instructions, otherwise, there is a risk of electric shock!
  • Explosion risk! Improper use of this product poses an explosion risk. Be sure to follow the safety information below to avoid an explosion. Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device and batteries, or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
  • Risk of material damage! Improper handling may damage the device and/or accessories. Therefore, use the device only according to the following safety information. Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device for repair if necessary. Do not immerse the device in water! Do not expose the device to shocks, vibrations, dust, prolonged high temperatures, or extreme humidity. This may lead to malfunctions, short circuits, as well as damage to batteries and components. Only use the recommended batteries. Always replace weak or used batteries with a completely new set of fully charged batteries. Do not use batteries from different brands, types, or varying capacities. Remove batteries from the device when it is not used for an extended period.
  • Risk of voltage damage! The manufacturer is not liable for voltage damage resulting from incorrectly inserted batteries!
Skip product gallery

Customers also bought

Black Wind Vane
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519670025417003200700321070032207003230700324070033607003500700351070035207003700700380070039007803200780321078035209080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000

Available

€17.99*
BRESSER Wind Cups (Version B)
With this high-quality spare part, your BRESSER Multi outdoor sensor will be up and running again in no time.Compatible with weather stations with item number 7003700, 7003800, 7003240, 7003360, 7003350, 7003230, 7003220, 7003210, 7003200, 7003500, 7003510, WSX3001, 7803210 , 7803200, 7803510, 7803520, 7002541, 9080700, 7003900, 15196, 7003520 AND LOT number 1289012B, 1289032B, 1289061A, 1289061B, 1591529A,1590020 and aboveThe spare part is only compatible if both the item number and the LOT number of your weather station are included in the lists above.

Available

€17.99*
Black Wind Cups
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:15199152001520116268165097002510700251170025127002513700252570025317002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002582700258570025867002590700261070026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT50007004406780258078031507803300908050090806009602510700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

€17.99*
BRESSER Soil Temperature and Moisture Meter
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. This device is compatible with weather stations with the following article numbers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ireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

€39.00*
BRESSER Precision Thermo-Hygro Sensor
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. This device is compatible with weather stations with the following article numbers: 151961519715198151991520115439154401565915660162691642116427164441647916508165117002531700254170025717002580700258170025827002585700258670026107002620700315070032007003210700322070032307003240700330070034007003500700351070035207003700700380070039007004406700630079025317902541790258079025817902585790258679032007903210790322079032307903300790350079035109080600908070090808007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX1001000000WSX1001CM3LC1WSX1001CM3LC2WSX3001000000WSX3001CM3LC1WSX3001CM3LC2 FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

€34.95*
BRESSER Spa and Pool thermometer
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. This device is compatible with weather stations with the following article numbers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loating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

€39.00*
Skip product gallery

Customers also viewed

Grey Rain Funnel
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519915201165097002510700251170025127002520CM300070025257002550CM30007002550GYE0007002550MGU0007002550QT50007002580700258170025827002585700258670026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT500070044067802520780258078031507803300908050090806007002520000000700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

€17.99*
BRESSER Wind Cups (Version B)
With this high-quality spare part, your BRESSER Multi outdoor sensor will be up and running again in no time.Compatible with weather stations with item number 7003700, 7003800, 7003240, 7003360, 7003350, 7003230, 7003220, 7003210, 7003200, 7003500, 7003510, WSX3001, 7803210 , 7803200, 7803510, 7803520, 7002541, 9080700, 7003900, 15196, 7003520 AND LOT number 1289012B, 1289032B, 1289061A, 1289061B, 1591529A,1590020 and aboveThe spare part is only compatible if both the item number and the LOT number of your weather station are included in the lists above.

Available

€17.99*
Black Wind Vane
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519670025417003200700321070032207003230700324070033607003500700351070035207003700700380070039007803200780321078035209080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000

Available

€17.99*
Rain funnel for the weather station, item no. 7002530
This high-quality spare part will quickly get your weather station working again. IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:7002530

Available

€17.99*
BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station with Various Display Modes
What is the weather doing? The BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station will show you everything that you need to answer this question. The dynamic 17.8 cm (7-inch) HD TFT colour screen displays the measurements from the two included sensors in a range of different display modes. With a simple button press, you can view the weather data that you need: the home screen with the basic data and a reliable weather forecast, the detailed view with more data including maximum and minimum values and trends, or the overview screen with the temperature and air pressure. And for passionate weather enthusiasts, the Wi-Fi weather station can also display historical data. The data protocol delivers detailed measurements at intervals of 5, 10 or 30 minutes – all of which can be exported via USB for further analysis on your PC. All max/min values for the past day can also be displayed on the Wi-Fi weather station with a simple button press. You can also view a history graph to analyse the recent trends in the weather. Solar weather station with 7-in-1 sensor and thermo-hygro wireless sensor The MeteoChamp Weather Station comes with two feature-packed outdoor sensors: one 7-in-1 sensor and one wireless thermo-hygro sensor.The 7-in-1 wireless sensor reliably measures the outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. And what’s more, this multi-sensor with a large solar panel is powered by solar power. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries as a back-up during installation and they will take care of the power supply. The thermo-hygro wireless sensor is responsible for indoors. Because the climate there influences our well-being just as much as it does outside. That's why in addition to the built-in hygro-thermo sensor inside the base station this wireless thermo-hygro sensor measures the indoor temperature and humidity in an additional room. This way you can check in a flash whether the air in the bathroom is dry enough or the temperature in the children's room is pleasant - and give mould as well as excessively dry air no chance. Perfectly networked – share measurements from your Wi-Fi weather station In the age of the Internet, we want to be able to access our local weather data remotely and share it with others. The solar weather station comes with a Wi-Fi function that allows you to do just that – on up to 3 weather platforms. The Wi-Fi weather station features native support for the popular weather services ProWeatherLive, Weather Underground and Weathercloud, which can be configured in a few simple steps. If you prefer to use another platform such as the German-language portal AWEKAS, you can also connect your weather station to your desired provider. And if you have a smart home, the Wi-Fi weather station can be connected directly to your smart home system with our partner AWEKAS. For more information, visit the following link: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ The weather station also has another smart feature to ensure that you have plenty of time to get ready on frosty mornings: an ice/frost alarm. This makes the built-in alarm go off 30 minutes earlier when the outdoor temperature drops below -3 °C. The solar weather station also has an individually configurable weather alarm, which notifies you when the wind speed, rainfall or other readings exceed or drop below your preset limits. Keep track of the weather with the comprehensive measurements and display options on the BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station. BASE STATION FEATURES Large 17.8 cm (7-inch) HD TFT colour display with various display modes Multi-channel overviews for displaying all live data from the wireless sensors Publish your weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform) Displays precise measurement data from the 7-in-1 outdoor sensor (Outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity) Displays precise measurement data from the thermo-hygro sensor (temperature and humidity) Measures the indoor temperature and humidity Displays the graphical weather trend (last 24 hours) Weather forecast Beaufort scale display (scale for classifying the wind speed) Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Maximum/minimum value memory Trend display for all temperature and humidity measurements Historical data log, exportable to USB drive (not included) Individually configurable weather alarm for different measurements Weather data calibration Synchronization with Internet UTC time with time zone selection Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times Built-in alarm with ice/frost alarm Choose between dark or light display Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually) 7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE) Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system) Supports up to 5 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter (included), CR2032 backup battery (not included) Dimensions: 192 x 22 x 140 mm / Weight: 380 g FEATURES OF 7-IN-1 SOLAR-POWERED OUTDOOR SENSOR Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Range: Up to 150 m Dimensions: 410 x 170 x 225 mm / Weight: 533 g THERMO-HYGRO SENSOR FEATURES Measures the temperature and humidity Range: up to 150 m Power supply: 2x AA batteries (not included) Dimensions: 61 x 113 x 39.5 mm SCOPE OF DELIVERY 1x Base station 1x Solar-powered outdoor sensor 1x Wireless thermo-hygro sensor Power adapter Instruction manual

Available

€499.00*
BRESSER 4CAST 18,5" WiFi Home Weather Station with 8-in-1 Sensor
The BRESSER 4CAST 18.5" Wi-Fi Weather Station with 8-in-1 Sensor gives you the ultimate weather overview at a glance. Its huge display brings together a wealth of local measurements and online climate data. The highlights: a detailed 14-day forecast and Wet Bulb Globe Temperature with heat stress level. And with built-in Wi-Fi, the weather information is always just a tap away - wherever you are.Smarter forecasts with Wi-Fi Planning a barbecue or other outdoor events? Thanks to the local 14-day and 24-hour forecast you’ll always pick the perfect moment. Alongside temperature highs and lows and rain probability, the ProWeatherLive server also delivers local visibility and cloud cover directly to your screen. And if you want to share your own measurements, simply upload them via Wi-Fi to ProWeatherLive or Weathercloud - and join the global weather community. 8-in-1 outdoor sensor - your complete weather toolkit The 8-in-1 sensor is a powerhouse of precision. Temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity and WBGT - all captured by one compact device. Its large adjustable solar panel powers the unit sustainably, while three AA batteries (not included) step in when the sun doesn’t shine. With a range of up to 150 metres, you can place it exactly where it delivers the most accurate readings. WBGT - stay safe in the heat When summer temperatures soar, your health can be at risk. The Wet Bulb Globe Temperature combines three key values - air temperature, mean radiant temperature and wet-bulb temperature - to give a precise picture of heat stress on your body. If the crucial humidity-based wet-bulb value stays above 35 °C for too long, your body absorbs heat from its surroundings - and that can be dangerous. Whether exercising, gardening or enjoying the outdoors, this professional station keeps the WBGT value in sight, while the heat stress index shows you instantly when it’s time to take a break. The digital weather station as indoor climate advisor Comfort doesn’t stop at the front door. The base station’s built-in thermometer and hygrometer keep track of indoor temperature and humidity. The comfort indicator gives a quick visual cue if your living room, bedroom or office could do with an adjustment. The station also monitors air pressure - ideal for spotting changes in the weather before they arrive. Everything you need - indices and alerts This garden weather station calculates all the extras: feels-like temperature, heat index, dew point and wind chill. The Beaufort scale reveals how powerful the wind really is, while the max./min. memory lets you track trends at a glance. And with ProWeatherLive alerts, you’ll never be caught unprepared. With its rain gauge and more, this station quickly becomes your reliable all-weather partner.Get your complete weather insight today with the BRESSER 4CAST 18.5" Wi-Fi Weather Station with 8-in-1 Sensor! FEATURES BASE STATION Huge, easy-to-read 18.5-inch display (47 cm) Local 24-hour/14-day forecast with highs, lows and chance of rain via ProWeatherLife server Wi-Fi connection for sharing local data on ProWeatherLive or Weathercloud Local visibility and cloud cover via ProWeatherLive server Indoor temperature and humidity with comfort indicator Air pressure monitoring Precise readings from the 8-in-1 solar outdoor sensor (temperature, humidity, wind speed/direction, rainfall, UV level, light intensity, WBGT) Heat stress index Beaufort scale (wind strength classification) Weather indices (feels-like temperature, heat index, dew point, wind chill factor) Time, date, weekday and moon phase Sunrise/sunset and moonrise/moonset Max./min. memory Weather alerts via ProWeatherLive Backlight with auto-dimmer WSLink app for simple Wi-Fi setup, data calibration and firmware updates Compatible with optional sensors (not included, see BRESSER accessories): Optional thermo-hygro sensors for indoor climate Optional soil and pool sensors for garden use Optional water and lightning detectors Optional PM2.5/10, CO2 and HCHO+VOC sensors for air quality Power supply: mains adapter (included), 1x CR2032 back-up battery (not included) FEATURES SENSORS Measures temperature, humidity, wind speed/direction, rainfall, UV level, light intensity and WBGT Powered by large adjustable solar panel Runs on 3x AA batteries (not included) when sunlight is insufficient Waterproof housing Long transmission range up to 150 m SCOPE OF DELIVERY Base station with mains adapter 8-in-1 sensor Instruction manual

Available

€599.00*
Black Wind Cups
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:15199152001520116268165097002510700251170025127002513700252570025317002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002582700258570025867002590700261070026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT50007004406780258078031507803300908050090806009602510700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

€17.99*