Skip to main content Skip to search Skip to main navigation

BRESSER 11-Day 4Cast CV Wi-Fi Weather Station 7-in-1

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
  • If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
  • The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
  • CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
  • Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
  • The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery

Compatible Sensors

BRESSER HCHO + VOC Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700324070035207003700700380070039009080700 If there’s something in the air, it’s probably not very good for us. This could be formaldehyde (HCHO) or Volatile Organic Compounds (VOC), which can enter our ambient air through things like furniture, materials, tobacco smoke, paints or adhesives. With the BRESSER HCHO + VOC Sensor, you can keep an eye on the air quality and take targeted measures to improve the situation. The integrated LC display of the sensor displays precise formaldehyde readings as well as the VOC level in the air. Already have a compatible weather station from BRESSER? Then you can quickly connect the HCHO + VOC sensor and start to display the readings there as well. Use the BRESSER HCHO + VOC Sensor as a stand-alone solution to keep an eye on your air quality, or as an extension for your weather station. FEATURES Sensor for formaldehyde measurement (HCHO) with VOC content (Volatile Organic Compounds) Can be used alone or with select BRESSER weather stations Integrated LC display (37 x 21 mm) for displaying HCHO values and VOC content With battery level indicator 4 available channels Range: up to 150 m Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included) Size: 82 x 120.5 x 43 mm SCOPE OF DELIVERY HCHO + VOC Sensor 3x AA rechargeable batteries, 1.2 V USB cable Weather station not included Instruction manual

Available

€99.00*
BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1565970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station. FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

Available

€34.95*
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

€39.00*
%
BRESSER 7-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003200700321070032207003230700324070033007003360700340070035007003510700370070038007003900700440690806009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Solar-powered outdoor sensor Mounting materials Base station is not included! Instruction manual

Available

€159.00* €169.00* (5.92% saved)
%
BRESSER Water Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198152011543915440156597002610700262070032007003210700322070032307003240700352070038009080700 Whether it’s the washing machine in your basement or the dishwasher in the kitchen, old appliances are susceptible to water leaks. The BRESSER water detector triggers a 90 dB alarm tone when it detects a leak. If the sensor is connected to your BRESSER weather station, a symbol will also appear on the display of your base station, allowing you to take action before the water causes serious damage. Also a handy helper in aquaristics, where leaks occur frequently, for example when the sealing gasket on the external filter needs to be changed. FEATURES Water sensor for detecting water leaks Loud 90 dB alarm tone Range of up to 150 mCable length: approx. 140 cm 7 available channels Wireless and compact design Power supply: 2x AA batteries (not included) DELIVERY CONTENT Water detector Instruction manual

Available

€29.00* €45.00* (35.56% saved)
%
BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700320070032107003220700323070032407003300700335070033607003400700350070035107003600CM30007003600GYE0007003600QT500070037007003800700390070044069080600908070070031000000007003600000000WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 420 x 170 x 213 mm SCOPE OF DELIVERY Wireless sensor with installation material Base station not included! Instruction manual

Available

€139.00* €149.00* (6.71% saved)
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

€39.00*
Skip product gallery

Compatible Base Stations

BRESSER Additional / Spare Base Station for Weather Station 7003240
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Graphic weather forecast for the next 11 days (today and next 10 days)/for 24 hours (now and next 23 hours) from the ProWeatherLife server 11-day forecast for maximum and minimum temperature, as well as average temperature and chance of precipitation from the ProWeatherLife server Local visibility and cloud cover via the ProWeatherLive server WiFi connection for publishing local weather data on ProWeatherLive and up to 2 other weather platforms (e.g. AWEKAS) Indoor temperature (°C/°F) and humidity with trend Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Trend graph for air pressure, precipitation, temperature (indoor/outdoor) or humidity (indoor/outdoor) on the display Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Wind gusts and average wind speed, Beaufort scale (wind speed scale) Sunburn time display Air pressure Set weather notifications via the ProWeatherLive server Maximum/minimum value memory Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm clock with frost alarm WSLink app for easy connection to WiFi and weather platform, weather data calibration and for firmware updates 7 languages for day of the week (EN, DE, FR, ES, IT, NL, RU) Supports additional optional sensors Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station No outdoor sensor included!Mains plug Instruction manual

Available

€159.00*
BRESSER Additional / Replacement Base Station for the WSX3001 Professional Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Would you like to view your weather data in an additional room? Are you looking for a gift to enable your neighbours to monitor your local weather? Or maybe the base station from your BRESSER Professional Wi-Fi Weather Station didn’t survive your recent move or your child’s latest tantrum? Whether you’re looking for an extension or a replacement, this base station will allow you to access all of your measurements on the large 20 cm screen. In addition to displaying the data from your 7-in-1 sensor (not included), it can also show the readings from up to 7 compatible additional sensors (not included). Share your weather data worldwide The base station can also be connected to online platforms such as Wundergound or Weathercloud so that you can share and access your weather data online. And with the German-language portal AWEKAS, you can integrate your measurements into your smart home system (configuration instructions: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/). Additional base station – monitor the indoor climate in another room If your existing base station is in the living room, you can place a second base station in the kitchen or your child’s bedroom to view your local weather data in an additional room. The base station features a built-in thermo-hygro sensor, which measures the ambient temperature and humidity and displays a smiley symbol to indicate the quality of the indoor climate. You can then take effective measures to prevent the risk of mould or dry air. The additional base station is also ideal as a bedside clock. It features a built-in backlight that can be dimmed or switched off completely to ensure you get a good night’s sleep. And so that you wake up on time, it also has a practical alarm with a snooze function, as well as a frost warning function that triggers that alarm 30 minutes earlier when the outdoor temperature drops below -3°C – plenty of time to ensure that you get to work or school safely. Access all the practical functions of your BRESSER Professional Wi-Fi weather station with this additional/replacement base station. FEATURES WiFi connection with internet time synchronisation and support for firmware updates Publish your weather data on Wunderground or Weathercloud Indoor temperature (°C/ °F) and humidity (%) Displays the outdoor temperature (°C/ °F) and humidity (%) Light intensity (Klux / Kfc / W/m²) Displays the current UV index, exposure level and recommended protection Displays the sunburn time (mins) based on the current UV level Wind direction and speed (m/s; km/h; Knoten; mph) Beaufort index (scale for measuring wind speed) Air pressure with 24-hour history (hPa/inHg/mmHg) Rainfall with history (day/week/month) Graphical weather forecast for next 12-24 hours Weather index (‘feels like’ function, dew point, heat index, wind chill factor) Trend indicator shows the weather trends for the next few minutes Visual comfort level indicator for room temperature and humidity Phases of the moon Sunrise and sunset times Alarm with snooze function (5 minutes) and ice/frost warning Weekday alarm Min./max. memory (up to 24 hours) LED backlight, amber-coloured Wall bracket and table stand Supports a 7-in-1 sensor and up to 7 indoor sensors (sensors are not included) Dimensions: 215 x 172 x 29 mm and weight: 639 g Power supply: Power adapter and 3x AAA batteries as backup batteries (batteries are not included) Integrated Wi-Fi transmission to AWEKAS Security protocol: supports WPA3 encryption for firmware version 1.09 and above DELIVERY CONTENT Base station with stand Power adapter Instruction manual

Available

€99.00*
%
BRESSER Additional / Replacement Base Station for the 7003220 6-Day 4CAST PRO SF Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 6-day weather forecast (today and 5 following days) Large 25.4 cm (10-inch) colour display with stylish design Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€75.00* €100.00* (25% saved)
%
BRESSER Additional / Replacement Base Station for 7003510 MeteoChamp Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Large 17.8 cm (7-inch) HD TFT colour display with various display modes Multi-channel overviews for displaying all live data from the wireless sensors Publish your weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform) Measures the indoor temperature and humidity Displays the graphical weather trend (last 24 hours) Weather forecast Beaufort scale display (scale for classifying the wind speed) Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Maximum/minimum value memory Trend display for all temperature and humidity measurements Historical data log, exportable to USB drive (not included) Individually configurable weather alarm for different measurements Weather data calibration Synchronization with Internet UTC time with time zone selection Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times Built-in alarm with ice/frost alarm Choose between dark or light display Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually) 7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE) Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system) Supports up to 7 wireless sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter (included), CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€299.00* €329.00* (9.12% saved)
%
BRESSER Additional / Replacement Base Station for the 7003230 8-Day 4CAST XL Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 8-day weather forecast (today and 7 following days) Extra large 48.3 cm (19”) colour display with slim bezel Wide-angle display for easy reading of measurements when wall-mounted Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€359.00* €549.00* (34.61% saved)
Skip product gallery

Spare Parts

Black Wind Vane
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519670025417003200700321070032207003230700324070033607003500700351070035207003700700380070039007803200780321078035209080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000

Available

€17.99*
Black Rain Funnel
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519670025417003200700321070032207003230700324070033607003500700351070035207003700700380070039007803200780321078035209080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000

Available

€17.99*
Replaceable Thermo-Hygro Sensor Module TH03 for Multi-Sensors
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:WARNING: For one or more compatible weather stations, compatibility must be checked not only by the item number but also by the lot number! If there is a lot number restriction, it is indicated in brackets next to the item number.15196 (from lot number 1609997)15197 (from lot number 1609998)15198 (from lot number 1609999)15199 (from lot number 1610000)15200 (from lot number 1610001)15201 (from lot number 1610002)15245 (from lot number 1610419)15439 (from lot number 1612530)15440 (from lot number 1612531)15656HC3 (Not compatible with HC2 and HC1!)15657HC3 (Not compatible with HC2 and HC1!)15658HC3 (Not compatible with HC2 and HC1!)15659 (from lot number 1613296)15660 (from lot number 1613297)15663HC3 (Not compatible with HC2 and HC1!)16479 (from lot number PO0000212)16509HC3 (Not compatible with HC2 and HC1!)16510HC3 (Not compatible with HC2 and HC1!)7002510 (from lot number 1604893)7002511 (from lot number 1605506)7002512 (from lot number 1605507)7002525 (from lot number 1605508)7002541 (from lot number 1603270)7002550CM3000 (from lot number 1604894)7002550GYE000 (from lot number 1603234)7002550MGU0007002550QT5000 (from lot number 1612624)7002580 (from lot number 1611741)7002581 (from lot number 1603236)7002582 (from lot number 1608426)7002585 (from lot number 1605512)7002586 (from lot number 1610009)7002590 (from lot number 838433)7002620 (from lot number 1600096)7003100CM3000 (from lot number 1611715)7003100GYE000 (from lot number 1059567)7003100HZI000 (from lot number 1059568)7003100QT5000 (from lot number 1226688)7003150 (from lot number 1600099)7003200 (from lot number 1605514)7003210 (from lot number 1604275)7003220 (from lot number 1602916)7003230 (from lot number 1602917)7003240 (from lot number 1603246)7003300 (from lot number 1605517)7003350 (from lot number 1606311)7003360 (from lot number 1605518)7003400 (from lot number 1596981)7003500 (from lot number 1602918)7003510 (from lot number 1602034)7003520 (from lot number 1600098)7003600CM3000 (from lot number 1610669)7003600GYE000 (from lot number 1274953)7003600QT5000 (from lot number 1077389)7003700 (from lot number 1590021)7003800 (from lot number 1611718)7003900 (from lot number 1604767)7004406 (from lot number 1600100)7802580HC3 (Not compatible with HC2 and HC1!)7803150HC3 (Not compatible with HC2 and HC1!)7803200HC3 (Not compatible with HC2 and HC1!)7803210HC3 (Not compatible with HC2 and HC1!)7803300HC3 (Not compatible with HC2 and HC1!)7803350HC3 (Not compatible with HC2 and HC1!)7803520HC3 (Not compatible with HC2 and HC1!)9080500 (from lot number 1603264)9080600 (from lot number 1608115)9080700 (from lot number 1604765)9080800 (from lot number 1604766)9602510 (from lot number 1164820)700255000000070031000000007003600000000WSX1001CM3LC1 (from lot number 874894)WSX1001CM3LC2 (from lot number 874894)WSX3001 (from lot number 1603270)WSX3001CM3LC1 (from lot number 1603270)WSX3001CM3LC2 (from lot number 1603270)WSX1001000000 (from lot number 874894)WSX3001000000 (from lot number 1603270)

Available

€24.90*
Mounting rod and mounting hardware A
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:15196151971519815245154391544015656156571565870025417003200700321070032207003230700324070033607003500700351070035207003700700380070039007803200780321078035209080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000

Available

€24.90*
Power supply 5V-1A (EU/UK) angled
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:148951499314998150041501315130151981519915243154181626916427164791651116630166707000023700002770000307002541700258270025867003150700321070032207003240700335070033607003400700370070038007003900700433070043407004350700436070043707004380700440670065007006510700651170072017007350700751170075207007620790254179025867903210790322079033509070600907070090707109080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000

Available

€14.99*
BRESSER Wind Cups (Version B)
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:WARNING: For one or more compatible weather stations, compatibility must be checked not only by the item number but also by the lot number! If there is a lot number restriction, it is indicated in brackets next to the item number.7003200 (from lot number 1590020)7003210 (from lot number 1590020)7003220 (from lot number 1590020)7003230 (from lot number 1590020)7003240 (from lot number 1590020)7003350 (from lot number 1590020)7003360 (from lot number 1590020)7003500 (from lot number 1590020)7003510 (from lot number 1590020)7003700 (from lot number 1590021)7003800 (from lot number 1590020)780320078032107803350WSX3001 (from lot number 1590020)WSX3001CM3LC1 (from lot number 1590020)WSX3001CM3LC2 (from lot number 1590020)WSX3001000000 (from lot number 1590020)

Available

€17.99*
Battery compartment cover for 7-in-1 and 9-in-1 sensor
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519670025417003200700321070032207003230700324070033607003500700351070035207003700700380070039007803200780321078035209080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000

Available

€4.99*
Skip product gallery

Customers also bought

BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

€39.00*
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

€39.00*
%
BRESSER 9-in-1 MeteoChamp HD WiFi Weather Station
Perfect for passionate weather enthusiasts: The BRESSER 9-in-1 MeteoChamp HD WiFi Weather Station offers everything a hobby meteorologist's heart desires with various display modes, a sophisticated multi-sensor with 9 different sensors, and comprehensive data storage with export options. Additionally, the extensive weather forecast, the heat stress index, and the air quality data make it easy to plan your outdoor activities while keeping health in mind. And thanks to the Wi-Fi connection, you always have your own measurements on the go on your mobile device. Weather station perfectly presenting extensive measurement data How strong will the wind blow in my face shortly? With the wireless weather station, you can answer this and other meteorological questions in no time. The partially solar-powered multi-sensor measures all relevant weather parameters from temperature to air pressure with precision. Trend graphs, data log, channel overview or max/min value display – enjoy numerous possibilities to evaluate the data at a glance on the screen. A CSV export to your PC can also be done in no time. Detailed weather forecast for long-term planning Do you want to know if your weekend trip will be ruined by rain? With the MeteoChamp, you will have a comprehensive weather forecast on your screen in no time. Find out what to expect hourly for the next 24 hours or daily for the next 14 days in terms of climate. The temperature and precipitation probability forecast helps you with your planning. Carefree summer fun – with the heat stress index When the weather is nice, many head outdoors. But when the sun is too strong, we need to take care of our health during strenuous activities. This is where the heat stress index comes into play, calculated by the weather station. It is based on the Wet Bulb Globe Temperature, which considers the key heat factors in the environment. The four warning levels help you stay safe and healthy on hot days. Breathe easy – with the air quality display How clean is the air you breathe? The local AQI (Air Quality Index) shows you directly whether the air in your surroundings is clean. Also, current data on pollutant exposure from PM2.5, PM10, NO2, SO2, O3, and CO from the internet are available at the press of a button. For data measured directly on-site, you can expand your weather station with optional CO2 sensors (not included), in addition to optional thermo-hygro sensors (not included) or water detectors (not included). Keep an eye on the climate with the help of a versatile weather expert: the BRESSER 9-in-1 MeteoChamp HD WiFi Weather Station. FEATURES BASE STATION Weather station with HD display for various display modes Display of the exact measurement data from the 9-in-1 outdoor sensor (outdoor temperature, outdoor humidity, wind speed, wind direction, precipitation amount, UV level, light intensity, WBGT, air pressure) Heat stress index based on WBGT Weather forecast (14 days / 24 hours) including temperature and precipitation probability WiFi connection for sharing and retrieving local data on platforms like ProWeatherLive (3 years membership included), WeatherUnderground, and Weathercloud Indoor temperature (°C/°F) and humidity Display of internet data on local AQI value (Air Quality Index) and the 6 most important pollutants (PM2.5, PM10, NO2, SO2, O3, CO) Multi-channel overviews of live data from all wireless sensors Felt outdoor temperature and dew point Max/min value memory with timestamp Trend graphs over 72 hours for all sensors Data storage with export function High/low value alarm for various measurements Weather data calibration Alarm clock with frost warning Time and date (internet time synchronisation) Moon phase, sunrise/sunset, moonrise/moonset Expandable with the following optional sensors: Up to 7x thermo-hygro, ground, and/or pool sensors (not included) Up to 7x water detectors (not included) 1x PM2.5/10 sensor (not included) 1x CO2 sensor (not included) 1x HCHO and VOC sensor (not included) 1x lightning sensor (not included) Various backgrounds adjustable Power supply: Power plug (included), CR2032 back-up battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES MULTISENSOR Measures temperature, humidity, wind speed, wind direction, precipitation amount, UV level, light intensity, air pressure, WBGT Operates via a large movable solar panel If there is insufficient sunlight, operates on 3x AA batteries (not included) Waterproof housing High range up to 150 m SCOPE OF DELIVERY Base station including power plug 9-in-1 outdoor sensor Manual

Available

€429.00* €449.00* (4.45% saved)
%
BRESSER 7-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003200700321070032207003230700324070033007003360700340070035007003510700370070038007003900700440690806009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Solar-powered outdoor sensor Mounting materials Base station is not included! Instruction manual

Available

€159.00* €169.00* (5.92% saved)
Skip product gallery

Customers also viewed

%
BRESSER Wi-Fi ClearView Weather Station with 7-in-1 Sensor
The new BRESSER WIFI ClearView Weather Station with 7-in-1 sensor offers a very comprehensive range of weather data. The multifunctional outdoor sensor can easily be installed with the included mounting accessories! The outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, precipitation, as well as UV level and light intensity via 868 MHz frequency to the base station. The base station shows a large variety of current and historical local weather data on its 8.3'' TRUE BLACK colour display. The latter allows internal storage and evaluation of the measurement data over a period of 24 hours. A very reliable forecast for the upcoming 12h is calculated by your local weather data which will be displayed on the base station. The WIFI function allows users to share their local data via apps such as 'Weather Underground'' or ''Weather Cloud''. In addition, the WIFI function enables Internet Time Synchronization and firmware updates. An alarm can be individually programmed for maximum and minimum values, which triggers both an acoustic and a light alarm signal when the specified value is reached. For outside temperatures from -3°C, a special alarm can also be activated for frost/ice warnings. A poor indoor climate often poses health risks, especially for children and elderly people. The BRESSER WIFI ClearView Weather Station offers a smart feature for this. The indoor climate indicator informs about current indoor climate conditions by means of the room climate indicator. For all ''moon addicts'' the different moon phases are also displayed. An alarm clock with snooze function is also included in the range of functions. This station can also be connected to the mulitlingual portal AWEKAS* (*EU customers only) . Optionally you can transmit your weather data to AWEKAS or call up your weather data worldwide. Transfer data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home home control system. FEATURES8.3'' colour display (19.3 x 9.3 cm) for detailed time and weather information WIFIconnection Internet time synchronization Receives weather data from the 7-in-1 sensor and the wireless thermo-hygro sensor via 868 MHz Publish your local data from your weather station on platforms like 'Weather Underground'', ''Weather Cloud" and "AWEKAS*" (*EU customers only)Display of time, calendar, weekday and moon phase wake-up function Ice/Frost warning Interior temperature (°C / °F) Humidity with comfort display Outdoor temperature (°C / °F) Display of UV level and light intensity Display of gusts and average wind speed Wind direction (exact display based on 16 directions) Rainfall (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Perceived outdoor temperature weather index for dew point, wind chill factor and heat index Min/max value memory (up to 24 hours) Alarm with LED display Weather Calibration 3 different display brightness levels: High / Low / Off 7 languages for the weekday Support of firmware updates Security type: supports WPA3 encryptionSupport a wireless 7-in-1 sensor with 150 m transmission range (included) Supports up to 7 additional wireless sensors (optional) (Art.-No.: 7009999) Integrated WIFI transmission to AWEKAS* (*EU customers only) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.What's IncludedBase station Outdoor sensor 7-in-1 incl. mounting accessories Power supply unit and cable, batteries not included

Available

€199.00* €249.00* (20.08% saved)
%
BRESSER 7-in-1 WiFi Weather Station 4CAST with 6-Day Forecast
Stay on top of the weather with the BRESSER 7-in-1 WiFi Weather Station 4CAST with 6-Day Forecast! The weather station displays a 6-day weather forecast with maximum/minimum temperature readings, and also tells you the chance of rain. It also features a 10-inch display, which ensures that all the weather stats are easy to read. The modern Wi-Fi weather station with a solar-powered sensor obtains the forecast data via the Internet from the ProWeatherLive platform. In addition to the weather forecast, the weather station also displays the local visibility and cloud cover. Eco-friendly weather station with solar-powered sensor, ideal for amateur meteorologists The weather station comes with a solar-powered outdoor sensor, which is powered by solar energy and measures temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity. Simply align the large solar panel with the sun according to your location. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries (not included) as a back-up during installation, and they will take care of the power supply. All the measurements will appear on the screen of the base station, which can be located up to 150 metres away. Wi-Fi weather station with feature-packed base station The base station of the 6-day 4CAST PRO SF weather station features a stylish design and displays the data received from the solar-powered sensor. It also takes its own readings via the built-in thermo/hygro sensor, which measures the ambient indoor temperature, humidity and air pressure. Together with the maximum/minimum memory, this enables you to keep an eye on the indoor climate and effectively prevent mildew and excessively dry air. Outdoor temperature, precipitation and more – you can also view the maximum/minimum readings for the other measurements made by the solar-powered sensor. Share weather data and use it with your smart home Access the measurements from your solar-powered sensor remotely and share them with others: with a few clicks, you can send your weather station data to the ProWeatherLive platform. If you have a smart home, you can also make use of the German-language portal AWEKAS, which allows you to transfer measurement data from the solar-powered sensor to your smart home system free of charge. Simply follow the link below to set up the weather station for your smart home system: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ Never lose track of time In addition to its elegant, contemporary design, the 4CAST PRO SF Wi-Fi weather station allows you to keep track of the time, date, day of the week and moon phase via the large display. For people who enjoy watching the sunset or observing the moon, the weather station also displays the sunrise/moonrise and sunset/moonset times.  Solar-powered weather data: Stay informed of the weather with the BRESSER 7-in-1 WiFi Weather Station 4CAST with 6-Day Forecast! BASE STATION FEATURES 6-day weather forecast (today and 5 following days) Large 10” display with stylish design Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) Dimensions: 219 x 200 x 26 mm Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES OF 7-IN-1 OUTDOOR SENSOR Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm DELIVERY CONTENT Base station Solar-powered outdoor sensor Power adapter Instruction manual

Available

€149.00* €219.00* (31.96% saved)
BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor
Stay one step ahead of the weather with the BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor. Thanks to the large, clear 10-inch (25.4 cm) display, you’ll have all the key data in front of you at a glance. Standout features include the detailed forecast and the WBGT heat stress level, helping you stay safe and comfortable on hot days. And with a Wi-Fi connection, your personalised weather updates are always within easy reach - wherever you are. Comprehensive forecasts straight to your screen Planning a barbecue or a family outing? The local 24-hour and 14-day forecasts, including maximum and minimum temperatures and chance of rain, powered by the ProWeatherLife server, make it easy to pick the perfect time. This weather station with outdoor sensor also provides internet-based data on visibility and cloud cover. Want to share your readings? Simply publish them via Wi-Fi to ProWeatherLive or Weathercloud - and connect with the global weather community. 8-in-1 outdoor sensor: compact, precise, reliable This clever all-rounder measures temperature, humidity, wind speed and direction, rainfall, UV level, light intensity and WBGT. The large adjustable solar panel keeps it running sustainably, while 3 AA batteries (not included) step in when sunlight is limited. With a range of up to 150 m and a durable, weatherproof housing, you can set it up just where you need it for the most accurate results. WBGT - stay safe in the heat When the mercury soars, heat can take a toll on your body. That’s where the Wet Bulb Globe Temperature (WBGT) comes in. It combines three factors - air temperature, mean radiant temperature and wet-bulb temperature - to calculate heat stress accurately. If the wet-bulb temperautre value stays above 35 °C, your body starts absorbing heat from its surroundings, which can quickly become dangerous. Whether you’re training, gardening or enjoying the outdoors, this digital weather station gives you the exact WBGT reading at all times. The heat stress index also provides a simple warning, so you know when to take a break. Indoor climate check included A healthy climate isn’t just for outside. The base station also measures indoor temperature and humidity via its built-in thermometer and hygrometer. The handy comfort indicator lets you know straight away whether your home or office needs airing. It also tracks air pressure, a reliable sign of changing weather. Detailed weather analysis with alerts This garden weather station doesn’t stop at the basics. It also calculates feels-like temperature, heat index, dew point and wind chill, plus shows you wind strength using the Beaufort scale. The max/min memory highlights local weather trends, and with ProWeatherLive alerts you’ll always be prepared for what’s coming. With its rain gauge and wealth of features, it’s like having your own personal weather assistant. Secure your professional weather overview now - with the BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor! FEATURES BASE STATION 24-hour and 14-day local forecasts with temperature highs, lows and rain probability (via ProWeatherLife server) Large 10-inch (25.4 cm) colour display Wi-Fi connection for publishing data to ProWeatherLive and Weathercloud Internet-based visibility and cloud cover Precise measurements from the 8-in-1 solar-powered outdoor sensor(temperature, humidity, wind speed/direction, rainfall, UV level, light intensity, WBGT) Indoor temperature and humidity with comfort indicator Air pressure display Heat stress index Beaufort scale for wind strength Weather indices: feels-like temperature, heat index, dew point, wind chill Max/min memory Weather alerts via ProWeatherLive Time, date, weekday and moon phase Sunrise/sunset and moonrise/moonset times Backlight with automatic dimmer WSLink app for easy Wi-Fi setup, data calibration and firmware updates Compatible with additional optional sensors (not included, see BRESSER accessories): Optional thermo-hygro sensors for indoor climate Optional soil and pool sensors for the garden Optional water detectors and lightning sensors Optional PM2.5/10, CO2 and HCHO+VOC sensors for air quality Power supply: mains adapter (included), 1x CR2032 backup battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.FEATURES SENSOR Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity and WBGT Powered by large, adjustable solar panel Back-up power with 3x AA batteries (not included) Weatherproof housing Range up to 150 m SCOPE OF DELIVERY Base station with mains adapter 8-in-1 outdoor sensor Instruction manual

Available

€299.00*
%
BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station with Various Display Modes
What is the weather doing? The BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station will show you everything that you need to answer this question. The dynamic 17.8 cm (7-inch) HD TFT colour screen displays the measurements from the two included sensors in a range of different display modes. With a simple button press, you can view the weather data that you need: the home screen with the basic data and a reliable weather forecast, the detailed view with more data including maximum and minimum values and trends, or the overview screen with the temperature and air pressure. And for passionate weather enthusiasts, the Wi-Fi weather station can also display historical data. The data protocol delivers detailed measurements at intervals of 5, 10 or 30 minutes – all of which can be exported via USB for further analysis on your PC. All max/min values for the past day can also be displayed on the Wi-Fi weather station with a simple button press. You can also view a history graph to analyse the recent trends in the weather. Solar weather station with 7-in-1 sensor and thermo-hygro wireless sensor The MeteoChamp Weather Station comes with two feature-packed outdoor sensors: one 7-in-1 sensor and one wireless thermo-hygro sensor.The 7-in-1 wireless sensor reliably measures the outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. And what’s more, this multi-sensor with a large solar panel is powered by solar power. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries as a back-up during installation and they will take care of the power supply. The thermo-hygro wireless sensor is responsible for indoors. Because the climate there influences our well-being just as much as it does outside. That's why in addition to the built-in hygro-thermo sensor inside the base station this wireless thermo-hygro sensor measures the indoor temperature and humidity in an additional room. This way you can check in a flash whether the air in the bathroom is dry enough or the temperature in the children's room is pleasant - and give mould as well as excessively dry air no chance. Perfectly networked – share measurements from your Wi-Fi weather station In the age of the Internet, we want to be able to access our local weather data remotely and share it with others. The solar weather station comes with a Wi-Fi function that allows you to do just that – on up to 3 weather platforms. The Wi-Fi weather station features native support for the popular weather services ProWeatherLive, Weather Underground and Weathercloud, which can be configured in a few simple steps. If you prefer to use another platform such as the German-language portal AWEKAS, you can also connect your weather station to your desired provider. And if you have a smart home, the Wi-Fi weather station can be connected directly to your smart home system with our partner AWEKAS. For more information, visit the following link: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ The weather station also has another smart feature to ensure that you have plenty of time to get ready on frosty mornings: an ice/frost alarm. This makes the built-in alarm go off 30 minutes earlier when the outdoor temperature drops below -3 °C. The solar weather station also has an individually configurable weather alarm, which notifies you when the wind speed, rainfall or other readings exceed or drop below your preset limits. Keep track of the weather with the comprehensive measurements and display options on the BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station. BASE STATION FEATURES Large 17.8 cm (7-inch) HD TFT colour display with various display modes Multi-channel overviews for displaying all live data from the wireless sensors Publish your weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform) Displays precise measurement data from the 7-in-1 outdoor sensor (Outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity) Displays precise measurement data from the thermo-hygro sensor (temperature and humidity) Measures the indoor temperature and humidity Displays the graphical weather trend (last 24 hours) Weather forecast Beaufort scale display (scale for classifying the wind speed) Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Maximum/minimum value memory Trend display for all temperature and humidity measurements Historical data log, exportable to USB drive (not included) Individually configurable weather alarm for different measurements Weather data calibration Synchronization with Internet UTC time with time zone selection Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times Built-in alarm with ice/frost alarm Choose between dark or light display Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually) 7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE) Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system) Supports up to 5 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter (included), CR2032 backup battery (not included) Dimensions: 192 x 22 x 140 mm / Weight: 380 g Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES OF 7-IN-1 SOLAR-POWERED OUTDOOR SENSOR Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Range: Up to 150 m Dimensions: 410 x 170 x 225 mm / Weight: 533 g THERMO-HYGRO SENSOR FEATURES Measures the temperature and humidity Range: up to 150 m Power supply: 2x AA batteries (not included) Dimensions: 61 x 113 x 39.5 mm SCOPE OF DELIVERY 1x Base station 1x Solar-powered outdoor sensor 1x Wireless thermo-hygro sensor Power adapter Instruction manual

Available

€449.00* €499.00* (10.02% saved)
BRESSER 7-in-1 LoRa Home Weather Station Terral
Go the extra distance with this LoRa wireless weather station: the BRESSER 7-in-1 LoRa Home Weather Station Terral delivers accurate readings and much more – straight to your display, even from far away. Whether you're at breakfast, grabbing your car keys or airing out the house, you’ll always be up to speed with the local weather. Long-range performance meets modern tech with this LoRa weather station Mounted on the roof, fence or at the bottom of the garden – the 7-in-1 sensor stays reliably connected. With a maximum range of up to 1.5 km in open spaces, the device keeps your base station constantly updated. Modern long-range radio technology ensures stable and dependable data transfer. And with its integrated solar panel, the multi-sensor extends battery life – a win for both you and the environment. Your smart weather station for indoors and out A quick glance at the display: does the weather forecast show sunshine or showers? You'll instantly know whether to pack sunglasses or an umbrella. The Terral professional weather station provides key info including outdoor temperature, humidity, wind speed and direction, rainfall, UV level and light intensity. Indoors, it helps you maintain a comfortable climate with its reliable room temperature and humidity readings. Smart features – online with your wireless weather station Thanks to its Wi-Fi functionality, your weather station connects directly to the digital weather world: your data can be uploaded in moments to platforms like Weathercloud and Wunderground. Local readings become global insights – and you're part of the weather-savvy community. You can access your data anytime, anywhere. Stay in control – with memory and alert functions at home Ready for anything: your weather station keeps track of the highest and lowest values like a logbook. Whether it’s a heatwave on the patio or a cold snap in the greenhouse, the max./min. value memory keeps you informed. For unusual readings – like strong gusts, heavy rain, pressure drops or frost – the station’s configurable alerts notify you as needed. Every measurement can be individually assigned an alarm based on your own thresholds. With the BRESSER 7-in-1 LoRa Home Weather Station Terral, you’ll always have the weather in sight – even across long distances, with full flexibility. FEATURES BASE STATION Wi-Fi connection for publishing local weather data to Wunderground and Weathercloud Indoor temperature (°C/°F) and humidity Displays accurate readings from the 7-in-1 outdoor sensor (outdoor temperature, humidity, wind speed/direction, rainfall, UV level, light intensity) Weather forecast Air pressure Max./min. value memory High/low value alert Time, date, moon phase, alarm clock with 2 alarm times Wall-mountable or freestanding Power supply: mains adapter (included), 3x AAA backup batteries (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES SENSOR LoRa transmission range of up to 1.5 km (in open areas without obstructions) Measures outdoor temperature, humidity, wind speed/direction, rainfall, UV level, light intensity Solar panel to extend battery life Battery powered: 3x AA (not included) SCOPE OF DELIVERY Base station 7-in-1 LoRa sensor Mounting materials Manual

Available

€279.00*
%
BRESSER 7-in-1 Solar 6-Day 4CAST PRO Wi-Fi Weather Station
Stay on top of the weather with the BRESSER 7-in-1 Solar 6-Day 4CAST PRO Wi-Fi Weather Station. The weather station features a stylish colour display and shows a reliable 6-day weather forecast. Data for the weather forecast is transferred from the ProWeatherLive platform to the solar-powered Wi-Fi weather station and displayed as a graphic symbol. The display also shows the local visibility and cloud cover from the ProWeatherLive server.  Eco-friendly solar-powered weather station The weather station comes with a solar-powered outdoor sensor, which provides reliable data for 7 local weather measurements: temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity. The measurements are then sent to the base station within a range of up to 150 metres. The large solar panel is easily brought into the perfect position. The built-in battery stores the solar energy to power the outdoor sensor in your garden or on your house or garage roof. Feature-packed base station In addition to an intuitive display that shows the measurements from the solar-powered wireless sensor, the base station also features numerous other functions. For example, it measures the indoor temperature, humidity and air pressure and features a comfort indicator that displays a smiley to show you whether the indoor climate is ideal. You can then take measures to prevent mildew and dry air. In addition, the solar-powered weather station also calculates a number of other useful readings such as the perceived temperature, sunburn time in minutes and the Beaufort index to help you choose the right clothes, avoid sunburn and ensure adequate wind protection. And in order to stay on top of the weather, the maximum/minimum memory allows you to keep an eye on the latest meteorological developments, either on a daily basis or from a certain point in time. Share data from your weather station and use it smartly Access your own measurements from anywhere and share them with others: with the solar weather station with rain gauge and anemometer and a weather platform such as ProWeatherLive, Weather Underground or WeatherCloud, you are just a few clicks away. You can also connect the weather station to the German portal AWEKAS. If you have a smart home, you can transfer measurement data from the solar weather station to your smart home system free of charge. To upload your readings, simply configure the settings as described in the following link: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ Solar-powered weather station with built-in clock and alarm Time, date, day of the week and moon phase - the 4CAST PRO Wi-Fi Solar Weather Station has everything that you need to stay on top of the time. It also displays the times for sunrise and sunset, as well as moonrise and moonset. No matter whether you're a late riser or early riser, the alarm clock with snooze function is guaranteed to wake you up in good time. When the ice/frost alarm is activated, the alarm goes off 30 minutes earlier if the temperature is below -3 °C, leaving you plenty to time to plan your journey. Get eco-friendly meteorological data - with the BRESSER 7-in-1 Solar 6-Day 4CAST PRO Wi-Fi Weather Station. BASE STATION FEATURES 6-day weather forecast (today and 5 following days) Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive and AWEKAS Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity with comfort indicator Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather alert settings via ProWeatherLife Weather data calibration Maximum/minimum value memory (daily/total) Intuitive colour display Backlight with automatic dimming function Time, calendar, day of the week and moon phase display Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) Dimensions: 215 x 176 x 25 mm Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES OF 7-IN-1 OUTDOOR SENSOR Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm DELIVERY CONTENT Base station Solar-powered outdoor sensor Power adapter Instruction manual

Available

€279.00* €299.00* (6.69% saved)
%
BRESSER 7-in-1 LoRa 4Cast Home Weather Station
With the BRESSER 7-in-1 LoRa 4Cast Home Weather Station, you can monitor conditions up to 1.5 km away. LoRa technology makes this exceptional transmission range possible across open terrain, pulling in all seven measurement parameters from the precision outdoor sensor. The ProWeatherLive server adds a detailed 14-day weather forecast – complete with high and low temperatures and precipitation probability. Local visibility and cloud cover data also updates instantly on the crisp display, giving you a true all-round weather picture for smarter daily planning. Serious range, serious data – the 7-in-1 outdoor sensor The 7-in-1 outdoor sensor keeps tabs on outdoor temperature, humidity, wind speed and direction, rainfall, UV level and light intensity, sending every reading via LoRa technology over distances of up to 1.5 km straight to the base station. The adjustable solar panel keeps the solar weather station running longer between battery changes, while integrated bird spikesstop birds from perching on the outdoor sensor and fouling the readings. Your data, shared with the world – the Wi-Fi weather station The digital weather station connects via Wi-Fi to platforms including ProWeatherLive, Weather Underground and Weathercloud, putting your local measurements online for anyone to access via browser or app. Getting the LoRa wireless weather station up and running takes just minutes with the WSLink app. It also crunches the numbers on feels-like temperature, wind chill, heat index and dew point, plus wind strength rated on the Beaufort scale. Indoor comfort, outdoor trends – all on one display Worried about damp or dry air? The built-in comfort indicator tells you at a glance whether your indoor temperature and humidity are where they should be – perfect for home, office or anywhere else. The 22.8 cm True Black colour display with touch keys and night light mode also keeps you across relative and absolute air pressure. Max./min. value memory and a high/low value alert mean temperature swings never catch you off guard. The little extras that make a big difference Step outside prepared every morning – the built-in alarm clock with frost pre-alert gives you a heads-up the moment temperatures threaten to drop below zero. Daily sunrise and sunset times, moonrise and moonset and the current moon phase round out the picture, and optional additional sensors let the system grow as your needs do. Get the full weather story, every day – with the BRESSER 7-in-1 LoRa 4Cast Home Weather Station. FEATURES BASE STATION Local 24-hr/14-day forecast with high and low temperatures and precipitation probability via ProWeatherLive server Displays exact readings from the 7-in-1 outdoor sensor (outdoor temperature, humidity, wind speed/direction, rainfall, UV level, light intensity) Wi-Fi connection for publishing local weather data to ProWeatherLive (PWL), Weather Underground, Weathercloud or another platform Local visibility and cloud cover via ProWeatherLive server Beaufort scale for wind strength classification Weather forecast Indoor temperature (°C/°F) and humidity with comfort indicator Air pressure Max./min. value memory High/low value alert Feels-like temperature, heat index, wind chill, dew point Time, date, moon phase, alarm clock with frost pre-alert Sunrise/moonrise, sunset/moonset 22.8 cm True Black colour display (9") Expandable with optional sensors (see compatible accessories) Easy configuration and calibration via WSLink app Touch button controls Night light mode for controlling screen brightness at night Wall mounting or freestanding on a table Power supply: DC 5V 1A USB power adapter (included), backup battery: CR2032 (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.FEATURES OUTDOOR SENSOR LoRa transmission range of up to 1.5 km (in open terrain without obstacles) Measures outdoor temperature, humidity, wind speed/direction, rainfall, UV level, light intensity With bird spikes Adjustable solar panel to extend battery life Battery-powered: 3x AA (not included) Water-resistant housing SCOPE OF DELIVERY Base station LoRa outdoor sensor with bird spikes Power supply Mounting hardware Instruction manual

Available

€339.00* €399.00* (15.04% saved)