Skip to main content Skip to search Skip to main navigation

BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
  • If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
  • The AC/DC adapter serves as a disconnecting device. - The device’s AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
  • CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
  • Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
  • The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery

Compatible Sensors

%
BRESSER 8-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151971519815199 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures temperature, humidity, wind speed/direction, rainfall, UV level, light intensity and WBGT Powered by large adjustable solar panel Runs on 3x AA batteries (not included) when sunlight is insufficient Waterproof housing Long transmission range up to 150 m SCOPE OF DELIVERY 8-in-1 outdoor sensor Mounting material No base station included! Instruction manual

Available

€159.00* €169.00* (5.92% saved)
%
BRESSER HCHO + VOC Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700324070035207003700700380070039009080700 If there’s something in the air, it’s probably not very good for us. This could be formaldehyde (HCHO) or Volatile Organic Compounds (VOC), which can enter our ambient air through things like furniture, materials, tobacco smoke, paints or adhesives. With the BRESSER HCHO + VOC Sensor, you can keep an eye on the air quality and take targeted measures to improve the situation. The integrated LC display of the sensor displays precise formaldehyde readings as well as the VOC level in the air. Already have a compatible weather station from BRESSER? Then you can quickly connect the HCHO + VOC sensor and start to display the readings there as well. Use the BRESSER HCHO + VOC Sensor as a stand-alone solution to keep an eye on your air quality, or as an extension for your weather station. FEATURES Sensor for formaldehyde measurement (HCHO) with VOC content (Volatile Organic Compounds) Can be used alone or with select BRESSER weather stations Integrated LC display (37 x 21 mm) for displaying HCHO values and VOC content With battery level indicator 4 available channels Range: up to 150 m Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included) Size: 82 x 120.5 x 43 mm SCOPE OF DELIVERY HCHO + VOC Sensor 3x AA rechargeable batteries, 1.2 V USB cable Weather station not included Instruction manual

Available

€99.00* €189.00* (47.62% saved)
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

€39.00*
BRESSER 7-in-1 Outdoor Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700330070033607003400700350070035107003600CM30007003600GYE0007003600QT50007004406908060070031000000007003600000000WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre Measures the outdoor temperature and outdoor humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Transmission range of up to 150 metres Place in an unobstructed location in order to obtain accurate sunlight and rain data Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Wireless sensor Mounting materials Base station is not included! Instruction manual

Available

€119.00*
%
BRESSER 7-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003200700321070032207003230700324070033007003360700340070035007003510700370070038007003900700440690806009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Solar-powered outdoor sensor Mounting materials Base station is not included! Instruction manual

Available

€159.00* €169.00* (5.92% saved)
BRESSER PM2.5/10 Air Quality Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700321070032207003230700324070035207003700700380070039009080700 A useful extension to your BRESSER weather station, or also ideal as a practical standalone solution: This PM2.5/PM10 particulate meter will help you to keep track of the air that you breathe. The high-precision meter reliably detects two types of health-relevant particulate matter that causes air pollution: particles with a diameter of less than 10 μm (PM10) and less than 2.5 μm (PM2.5). Measurements – the current reading and the average particulate concentration from the past 24 hours – are displayed on the built-in display and on your weather centre. The base station can be placed at a distance of up to 150 metres from the meter. FEATURES High-precision PM2.5/PM10 meter Can be used alone or with select BRESSER weather stations LCD screen for displaying the current reading and the PM2.5/PM10 concentration from the past 24 hours Battery level indicator 4 available channels Transmission frequency: 868 MHz Range of up to 150 m Power supply: 3 rechargeable AA batteries (included) or USB port (cable included) DELIVERY CONTENT PM2.5/PM10 air quality meter 3 rechargeable AA batteries USB cable Instruction manual

Currently unavailable

€109.00*
%
BRESSER Water Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198152011543915440156597002610700262070032007003210700322070032307003240700352070038009080700 Whether it’s the washing machine in your basement or the dishwasher in the kitchen, old appliances are susceptible to water leaks. The BRESSER water detector triggers a 90 dB alarm tone when it detects a leak. If the sensor is connected to your BRESSER weather station, a symbol will also appear on the display of your base station, allowing you to take action before the water causes serious damage. Also a handy helper in aquaristics, where leaks occur frequently, for example when the sealing gasket on the external filter needs to be changed. FEATURES Water sensor for detecting water leaks Loud 90 dB alarm tone Range of up to 150 mCable length: approx. 140 cm 7 available channels Wireless and compact design Power supply: 2x AA batteries (not included) DELIVERY CONTENT Water detector Instruction manual

Available

€29.00* €45.00* (35.56% saved)
BRESSER CO2 Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700324070035207003700700380070039009080700 Add a breath of fresh air to your home or office just when you need it with the BRESSER CO2 Sensor. We all need healthy indoor air and enough oxygen to feel well and stay productive. That’s why it’s so important to air our spaces at regular intervals. The integrated display on the CO2 sensor quickly tells you when it’s the right time – you’ll see the carbon dioxide reading and level to give you an indication of the current air quality. The sensor also works well as an extension for a compatible weather station from BRESSER (not included). Connection is established quickly, and you’ll also be able to see CO2 levels on the screen. As a stand-alone solution or an extension for your weather station – ensure optimal fresh air supply with the BRESSER CO2 Sensor. FEATURES Wireless sensor for CO2 measurement Can be used alone or with select BRESSER weather stations Integrated LC display (37 x 21 mm) for displaying the current CO2 reading and level With battery level indicator Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included) 4 available channels Range: up to 150 m Size: 82 x 120.5 x 41 mm (W x H x D)  SCOPE OF DELIVERY CO2 Sensor 3x AA rechargeable batteries, 1.2 V USB cable Weather station and app not included! Instruction manual

Currently unavailable

€149.00*
%
BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700320070032107003220700323070032407003300700335070033607003400700350070035107003600CM30007003600GYE0007003600QT500070037007003800700390070044069080600908070070031000000007003600000000WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 420 x 170 x 213 mm SCOPE OF DELIVERY Wireless sensor with installation material Base station not included! Instruction manual

Available

€139.00* €149.00* (6.71% saved)
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

€39.00*
BRESSER Precision Thermo-Hygro Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

€34.95*
%
BRESSER 9-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199700261070026207003520 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, air pressure, WBGT Powered by large adjustable solar panel Backup with 3x AA batteries if sunlight is low (not included) Waterproof housing Wireless range up to 150 m SCOPE OF DELIVERY 9-in-1 outdoor sensor Mounting material No base station included! Instruction manual

Available

€109.00* €119.00* (8.4% saved)
BRESSER Lightning Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154407002610700262070032107003220700323070032407003520 The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels. FEATURES Lightning sensor for measuring lightning strikes Displays a light signal when a lightning strike is detected The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour LED indicator for data transmission Range of up to 100 metres Adjustable sensor sensitivity (high/medium/low) Power supply: 2x AA batteries (not included) DELIVERY CONTENT Lightning sensor Instruction manual

Available

€45.00*
Skip product gallery

Compatible Base Stations

BRESSER Additional / Spare Base Station for Weather Station 15198
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519715198 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time. FEATURES BASE STATION 24-hour and 14-day local forecasts with temperature highs, lows and rain probability (via ProWeatherLife server) Large 10-inch (25.4 cm) colour display Wi-Fi connection for publishing data to ProWeatherLive and Weathercloud Internet-based visibility and cloud cover Precise measurements from the outdoor sensor (not included) Indoor temperature and humidity with comfort indicator Air pressure display Heat stress index Beaufort scale for wind strength Weather indices: feels-like temperature, heat index, dew point, wind chill Max/min memory Weather alerts via ProWeatherLive Time, date, weekday and moon phase Sunrise/sunset and moonrise/moonset times Backlight with automatic dimmer WSLink app for easy Wi-Fi setup, data calibration and firmware updates Power supply: mains adapter (included), 1x CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Stand Power adapter

Available

€179.00*
Skip product gallery

Spare Parts

Replaceable Thermo-Hygro Sensor Module TH03 for Multi-Sensors
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:WARNING: For one or more compatible weather stations, compatibility must be checked not only by the item number but also by the lot number! If there is a lot number restriction, it is indicated in brackets next to the item number.15196 (from lot number 1609997)15197 (from lot number 1609998)15198 (from lot number 1609999)15199 (from lot number 1610000)15200 (from lot number 1610001)15201 (from lot number 1610002)15245 (from lot number 1610419)15439 (from lot number 1612530)15440 (from lot number 1612531)15656HC3 (Not compatible with HC2 and HC1!)15657HC3 (Not compatible with HC2 and HC1!)15658HC3 (Not compatible with HC2 and HC1!)15659 (from lot number 1613296)15660 (from lot number 1613297)15663HC3 (Not compatible with HC2 and HC1!)16479 (from lot number PO0000212)16509HC3 (Not compatible with HC2 and HC1!)16510HC3 (Not compatible with HC2 and HC1!)7002510 (from lot number 1604893)7002511 (from lot number 1605506)7002512 (from lot number 1605507)7002525 (from lot number 1605508)7002541 (from lot number 1603270)7002550CM3000 (from lot number 1604894)7002550GYE000 (from lot number 1603234)7002550MGU0007002550QT5000 (from lot number 1612624)7002580 (from lot number 1611741)7002581 (from lot number 1603236)7002582 (from lot number 1608426)7002585 (from lot number 1605512)7002586 (from lot number 1605513)7002590 (from lot number 838433)7002620 (from lot number 1600096)7003100CM3000 (from lot number 1611715)7003100GYE000 (from lot number 1059567)7003100HZI000 (from lot number 1059568)7003100QT5000 (from lot number 1226688)7003150 (from lot number 1600099)7003200 (from lot number 1605514)7003210 (from lot number 1604275)7003220 (from lot number 1602916)7003230 (from lot number 1602917)7003240 (from lot number 1603246)7003300 (from lot number 1605517)7003350 (from lot number 1606311)7003360 (from lot number 1605518)7003400 (from lot number 1596981)7003500 (from lot number 1602918)7003510 (from lot number 1602034)7003520 (from lot number 1600098)7003600CM3000 (from lot number 1610669)7003600GYE000 (from lot number 1274953)7003600QT5000 (from lot number 1077389)7003700 (from lot number 1590021)7003800 (from lot number 1611718)7003900 (from lot number 1604767)7004406 (from lot number 1600100)7802580HC3 (Not compatible with HC2 and HC1!)7803150HC3 (Not compatible with HC2 and HC1!)7803200HC3 (Not compatible with HC2 and HC1!)7803210HC3 (Not compatible with HC2 and HC1!)7803300HC3 (Not compatible with HC2 and HC1!)7803350HC3 (Not compatible with HC2 and HC1!)7803520HC3 (Not compatible with HC2 and HC1!)9080500 (from lot number 1603264)9080600 (from lot number 1608115)9080700 (from lot number 1604765)9080800 (from lot number 1604766)9602510 (from lot number 1164820)700255000000070031000000007003600000000WSX1001CM3LC1 (from lot number 874894)WSX1001CM3LC2 (from lot number 874894)WSX3001 (from lot number 1603270)WSX3001CM3LC1 (from lot number 1603270)WSX3001CM3LC2 (from lot number 1603270)WSX1001000000 (from lot number 874894)WSX3001000000 (from lot number 1603270)

Available

€24.90*
Mounting rod and mounting hardware A
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:15196151971519815245154391544015656156571565870025417003200700321070032207003230700324070033607003500700351070035207003700700380070039007803200780321078035209080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000

Available

€24.90*
Power supply 5V-1A (EU/UK) angled
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1489514993149981500415013151301519815199152431541816269164271647916511166307000023700002770000307002541700258270025867003150700321070032207003240700335070033607003400700370070038007003900700433070043407004350700436070043707004380700440670065007006510700651170072017007350700751170075207007620790254179025867903210790322079033509070600907070090707109080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000

Available

€14.99*
Skip product gallery

Accessories

BRESSER Precision Thermo-Hygro Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

€34.95*
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

€39.00*
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

€39.00*
%
BRESSER Water Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198152011543915440156597002610700262070032007003210700322070032307003240700352070038009080700 Whether it’s the washing machine in your basement or the dishwasher in the kitchen, old appliances are susceptible to water leaks. The BRESSER water detector triggers a 90 dB alarm tone when it detects a leak. If the sensor is connected to your BRESSER weather station, a symbol will also appear on the display of your base station, allowing you to take action before the water causes serious damage. Also a handy helper in aquaristics, where leaks occur frequently, for example when the sealing gasket on the external filter needs to be changed. FEATURES Water sensor for detecting water leaks Loud 90 dB alarm tone Range of up to 150 mCable length: approx. 140 cm 7 available channels Wireless and compact design Power supply: 2x AA batteries (not included) DELIVERY CONTENT Water detector Instruction manual

Available

€29.00* €45.00* (35.56% saved)
BRESSER Lightning Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154407002610700262070032107003220700323070032407003520 The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels. FEATURES Lightning sensor for measuring lightning strikes Displays a light signal when a lightning strike is detected The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour LED indicator for data transmission Range of up to 100 metres Adjustable sensor sensitivity (high/medium/low) Power supply: 2x AA batteries (not included) DELIVERY CONTENT Lightning sensor Instruction manual

Available

€45.00*
BRESSER PM2.5/10 Air Quality Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700321070032207003230700324070035207003700700380070039009080700 A useful extension to your BRESSER weather station, or also ideal as a practical standalone solution: This PM2.5/PM10 particulate meter will help you to keep track of the air that you breathe. The high-precision meter reliably detects two types of health-relevant particulate matter that causes air pollution: particles with a diameter of less than 10 μm (PM10) and less than 2.5 μm (PM2.5). Measurements – the current reading and the average particulate concentration from the past 24 hours – are displayed on the built-in display and on your weather centre. The base station can be placed at a distance of up to 150 metres from the meter. FEATURES High-precision PM2.5/PM10 meter Can be used alone or with select BRESSER weather stations LCD screen for displaying the current reading and the PM2.5/PM10 concentration from the past 24 hours Battery level indicator 4 available channels Transmission frequency: 868 MHz Range of up to 150 m Power supply: 3 rechargeable AA batteries (included) or USB port (cable included) DELIVERY CONTENT PM2.5/PM10 air quality meter 3 rechargeable AA batteries USB cable Instruction manual

Currently unavailable

€109.00*
%
BRESSER HCHO + VOC Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700324070035207003700700380070039009080700 If there’s something in the air, it’s probably not very good for us. This could be formaldehyde (HCHO) or Volatile Organic Compounds (VOC), which can enter our ambient air through things like furniture, materials, tobacco smoke, paints or adhesives. With the BRESSER HCHO + VOC Sensor, you can keep an eye on the air quality and take targeted measures to improve the situation. The integrated LC display of the sensor displays precise formaldehyde readings as well as the VOC level in the air. Already have a compatible weather station from BRESSER? Then you can quickly connect the HCHO + VOC sensor and start to display the readings there as well. Use the BRESSER HCHO + VOC Sensor as a stand-alone solution to keep an eye on your air quality, or as an extension for your weather station. FEATURES Sensor for formaldehyde measurement (HCHO) with VOC content (Volatile Organic Compounds) Can be used alone or with select BRESSER weather stations Integrated LC display (37 x 21 mm) for displaying HCHO values and VOC content With battery level indicator 4 available channels Range: up to 150 m Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included) Size: 82 x 120.5 x 43 mm SCOPE OF DELIVERY HCHO + VOC Sensor 3x AA rechargeable batteries, 1.2 V USB cable Weather station not included Instruction manual

Available

€99.00* €189.00* (47.62% saved)
BRESSER CO2 Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700324070035207003700700380070039009080700 Add a breath of fresh air to your home or office just when you need it with the BRESSER CO2 Sensor. We all need healthy indoor air and enough oxygen to feel well and stay productive. That’s why it’s so important to air our spaces at regular intervals. The integrated display on the CO2 sensor quickly tells you when it’s the right time – you’ll see the carbon dioxide reading and level to give you an indication of the current air quality. The sensor also works well as an extension for a compatible weather station from BRESSER (not included). Connection is established quickly, and you’ll also be able to see CO2 levels on the screen. As a stand-alone solution or an extension for your weather station – ensure optimal fresh air supply with the BRESSER CO2 Sensor. FEATURES Wireless sensor for CO2 measurement Can be used alone or with select BRESSER weather stations Integrated LC display (37 x 21 mm) for displaying the current CO2 reading and level With battery level indicator Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included) 4 available channels Range: up to 150 m Size: 82 x 120.5 x 41 mm (W x H x D)  SCOPE OF DELIVERY CO2 Sensor 3x AA rechargeable batteries, 1.2 V USB cable Weather station and app not included! Instruction manual

Currently unavailable

€149.00*
%
BRESSER 9-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199700261070026207003520 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, air pressure, WBGT Powered by large adjustable solar panel Backup with 3x AA batteries if sunlight is low (not included) Waterproof housing Wireless range up to 150 m SCOPE OF DELIVERY 9-in-1 outdoor sensor Mounting material No base station included! Instruction manual

Available

€109.00* €119.00* (8.4% saved)
%
BRESSER 8-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151971519815199 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures temperature, humidity, wind speed/direction, rainfall, UV level, light intensity and WBGT Powered by large adjustable solar panel Runs on 3x AA batteries (not included) when sunlight is insufficient Waterproof housing Long transmission range up to 150 m SCOPE OF DELIVERY 8-in-1 outdoor sensor Mounting material No base station included! Instruction manual

Available

€159.00* €169.00* (5.92% saved)
Skip product gallery

Customers also bought

BRESSER Precision Thermo-Hygro Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

€34.95*
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

€39.00*
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

€39.00*
BRESSER Lightning Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154407002610700262070032107003220700323070032407003520 The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels. FEATURES Lightning sensor for measuring lightning strikes Displays a light signal when a lightning strike is detected The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour LED indicator for data transmission Range of up to 100 metres Adjustable sensor sensitivity (high/medium/low) Power supply: 2x AA batteries (not included) DELIVERY CONTENT Lightning sensor Instruction manual

Available

€45.00*
%
BRESSER HCHO + VOC Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700324070035207003700700380070039009080700 If there’s something in the air, it’s probably not very good for us. This could be formaldehyde (HCHO) or Volatile Organic Compounds (VOC), which can enter our ambient air through things like furniture, materials, tobacco smoke, paints or adhesives. With the BRESSER HCHO + VOC Sensor, you can keep an eye on the air quality and take targeted measures to improve the situation. The integrated LC display of the sensor displays precise formaldehyde readings as well as the VOC level in the air. Already have a compatible weather station from BRESSER? Then you can quickly connect the HCHO + VOC sensor and start to display the readings there as well. Use the BRESSER HCHO + VOC Sensor as a stand-alone solution to keep an eye on your air quality, or as an extension for your weather station. FEATURES Sensor for formaldehyde measurement (HCHO) with VOC content (Volatile Organic Compounds) Can be used alone or with select BRESSER weather stations Integrated LC display (37 x 21 mm) for displaying HCHO values and VOC content With battery level indicator 4 available channels Range: up to 150 m Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included) Size: 82 x 120.5 x 43 mm SCOPE OF DELIVERY HCHO + VOC Sensor 3x AA rechargeable batteries, 1.2 V USB cable Weather station not included Instruction manual

Available

€99.00* €189.00* (47.62% saved)
BRESSER CO2 Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700324070035207003700700380070039009080700 Add a breath of fresh air to your home or office just when you need it with the BRESSER CO2 Sensor. We all need healthy indoor air and enough oxygen to feel well and stay productive. That’s why it’s so important to air our spaces at regular intervals. The integrated display on the CO2 sensor quickly tells you when it’s the right time – you’ll see the carbon dioxide reading and level to give you an indication of the current air quality. The sensor also works well as an extension for a compatible weather station from BRESSER (not included). Connection is established quickly, and you’ll also be able to see CO2 levels on the screen. As a stand-alone solution or an extension for your weather station – ensure optimal fresh air supply with the BRESSER CO2 Sensor. FEATURES Wireless sensor for CO2 measurement Can be used alone or with select BRESSER weather stations Integrated LC display (37 x 21 mm) for displaying the current CO2 reading and level With battery level indicator Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included) 4 available channels Range: up to 150 m Size: 82 x 120.5 x 41 mm (W x H x D)  SCOPE OF DELIVERY CO2 Sensor 3x AA rechargeable batteries, 1.2 V USB cable Weather station and app not included! Instruction manual

Currently unavailable

€149.00*
Skip product gallery

Customers also viewed

BRESSER 8-in-1 Wi-Fi Professional Home Weather Station Bise
With the BRESSER 8-in-1 Wi-Fi Professional Home Weather Station Bise, you’ll never be caught out by the weather. This sleek Wi-Fi weather station brings all the essentials - from climate to time data - together on a crisp 7.4-inch (18.8 cm) display. And when the mercury rises, the WBGT with heat stress level helps you keep your cool. Thanks to Wi-Fi connectivity, your data is always at hand - whether you’re out and about or taking it easy on the sofa. Your garden, your weather report Why rely on forecasts from miles away when your own outdoor sensor tells the full story? This weather station with outdoor sensor collects temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity and WBGT straight from your surroundings. With a 150 m range and a weatherproof housing, it’s easy to find the perfect spot for this powerful all-rounder. WBGT - a hot topic worth watching When the heat is on, your body needs extra care. That’s why the WBGT reading (Wet Bulb Globe Temperature) is so valuable. This digital weather station combines air temperature, mean radiant temperature and wet-bulb temperature to show how effectively your body can cool itself. If this last value stays above 35 °C for too long, it’s time to slow down. Whether you’re exercising, gardening or enjoying the outdoors, this professional weather station gives you round-the-clock WBGT values. The heat stress index also lets you know intuitively when to take it easy. Keep the indoors in check too This isn’t just about the great outdoors - the home weather station also keeps tabs on your indoor climate. The built-in thermometer monitors room temperature, the hygrometer measures humidity, and the comfort indicator gives you an instant smiley-face check on your air quality. Meanwhile, the integrated barometer tracks air pressure, warning you when a change in the weather is brewing. All the extras you’d expect from a pro This garden weather station doesn’t stop at the basics. Alongside exact measurements and a graphical forecast, it shows useful values such as feels-like temperature, heat index, dew point and wind chill. The Beaufort scale reveals just how breezy it will feel outdoors, while the max./min. memory tracks trends over time. Customisable high/low alarms alert you to conditions that matter most. And here’s a clever winter perk: when the temperature outside dips below -3°C, the alarm wakes you 30 minutes early so you can take your time on frosty mornings. Meet your all-in-one weather expert - the BRESSER 8-in-1 Wi-Fi Professional Home Weather Station Bise. FEATURES BASE STATION Wi-Fi connection for sharing local weather data on Weathercloud Displays readings from the 8-in-1 solar outdoor sensor (outdoor temperature, humidity, wind speed/direction, rainfall, UV level, light intensity, WBGT) Graphical weather forecast Air pressure Indoor temperature and humidity with comfort indicator Heat stress index Beaufort scale (wind force classification) Weather index (feels-like temperature, heat index, dew point, wind chill) Max./min. memory High/low alarms Automatic time, date and moon phase via internet sync Alarm clock with frost alert WSLink app for easy Wi-Fi setup, data calibration and firmware updates Supports up to 6 additional optional thermo-hygro sensors (not included, see BRESSER accessories) Power supply: USB cable with mains adapter (included), CR2032 backup battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES SENSOR Measures temperature, humidity, wind speed/direction, rainfall, UV level, light intensity and WBGT Weatherproof housing Range up to 150 m Powered by 3 x AA batteries (not included) SCOPE OF DELIVERY Base station with mains adapter 8-in-1 outdoor sensor Instruction manual

Available

€199.00*
BRESSER MeteoChamp 9-in-1 Wi-Fi Weather Station with Digital Photo Frame
With the BRESSER MeteoChamp 9-in-1 Wi-Fi Weather Station with Digital Photo Frame, you can keep an eye on the weather while enjoying your favourite images. Designed for keen amateur meteorologists, it combines clear display options, an advanced 9-in-1 multi-sensor and extensive data storage with export features – everything you need for accurate forecasts and analysis. And when it comes to preparing for outdoor plans, the comprehensive weather outlook, heat stress index and air quality data make it easy to look after your health. Thanks to Wi-Fi, your readings are also available on your mobile device wherever you are. A wealth of weather data – with the 9-in-1 sensor Curious which way the wind is blowing today? This wireless weather station gives you the answer in seconds. The solar-assisted outdoor sensor records everything from temperature and air pressure to light intensity with impressive accuracy. Channel overviews, max/min readings, trend graphs or a detailed data log – all appear at a glance on the stylish HD display. Prefer to analyse on your computer? Simply export the data in CSV format. Reliable forecasts for better planning Want to know if the barbecue will be rained off at the weekend? This garden weather station provides a detailed forecast – hourly for the next 24 hours and daily for the next 14 days. Even better: temperature trends and precipitation probability help you plan outdoor activities with confidence. Stay safe on hot days – with heat stress alerts When the sun shines, it’s tempting to head straight outdoors. But intense heat can be tough on the body. That’s where the heat stress index comes in. Based on the Wet Bulb Globe Temperature – a recognised measure that factors in temperature, humidity, wind and solar radiation – it gives you four warning levels to help you cope with the heat. Breathe easy – with local air quality measurement Fresh air or invisible pollutants? The local AQI (Air Quality Index) display shows you straight away. In addition, the digital weather station can access current online pollution data for PM2.5, PM10, NO2, SO2, O3 and CO. Want on-the-spot accuracy? Expand your setup with optional local sensors (see BRESSER accessories). Personal touches on your weather display – the smart photo frame function What makes this digital weather station with rain gauge unique? The integrated photo frame turns the display into your own gallery. Use the dedicated app to upload your favourite pictures to the base station, and enjoy an automatic slideshow of your memories alongside live weather data. A perfect blend of information and inspiration – ideal for the kitchen, living room or office. Keep track of the climate while reliving your favourite moments – with the BRESSER MeteoChamp 9-in-1 Wi-Fi Weather Station with Digital Photo Frame. FEATURES BASE STATION Large 10” HD TFT display (25.4 cm) with multiple viewing modes Shows live data from the 9-in-1 outdoor sensor (outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, WBGT, air pressure) Heat stress index based on WBGT Weather forecast (14 days / 24 hrs) with temperature and precipitation probability Wi-Fi connection for uploading local data to ProWeatherLive or Weathercloud Indoor temperature (°C/°F) and humidity Displays online AQI and six major pollutants (PM2.5, PM10, NO2, SO2, O3, CO) Multi-channel overview of all connected sensors Feels-like outdoor temperature and dew point Max./min. memory with time stamp 72-hour trend graphs for all sensors Data storage with export function (up to 3 years) High/low alarms for various parameters Data calibration Alarm clock with frost alert Works as a digital photo frame with automatic slideshow (Wi-Fi connection and app required) Time and date (internet time synchronisation) Moon phase, sunrise/sunset, moonrise/moonset Touch button operation Expandable with optional sensors: Up to 7x thermo-hygro, soil and/or pool sensors (not included) Up to 7x water detectors (not included) 1x PM2.5/10 sensor (not included) 1x CO2 sensor (not included) 1x HCHO and VOC sensor (not included) 1x lightning sensor (not included) Power supply: USB cable (included), 5V/1A EU/UK adapter (included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES SENSOR Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, air pressure, WBGT Powered by large adjustable solar panel Backup with 3x AA batteries if sunlight is low (not included) Waterproof housing Wireless range up to 150 m SCOPE OF DELIVERY Base station 9-in-1 outdoor sensor Instruction manual

Available

€549.00*
%
BRESSER 9-in-1 MeteoChamp HD WiFi Weather Station
Perfect for passionate weather enthusiasts: The BRESSER 9-in-1 MeteoChamp HD WiFi Weather Station offers everything a hobby meteorologist's heart desires with various display modes, a sophisticated multi-sensor with 9 different sensors, and comprehensive data storage with export options. Additionally, the extensive weather forecast, the heat stress index, and the air quality data make it easy to plan your outdoor activities while keeping health in mind. And thanks to the Wi-Fi connection, you always have your own measurements on the go on your mobile device. Weather station perfectly presenting extensive measurement data How strong will the wind blow in my face shortly? With the wireless weather station, you can answer this and other meteorological questions in no time. The partially solar-powered multi-sensor measures all relevant weather parameters from temperature to air pressure with precision. Trend graphs, data log, channel overview or max/min value display – enjoy numerous possibilities to evaluate the data at a glance on the screen. A CSV export to your PC can also be done in no time. Detailed weather forecast for long-term planning Do you want to know if your weekend trip will be ruined by rain? With the MeteoChamp, you will have a comprehensive weather forecast on your screen in no time. Find out what to expect hourly for the next 24 hours or daily for the next 14 days in terms of climate. The temperature and precipitation probability forecast helps you with your planning. Carefree summer fun – with the heat stress index When the weather is nice, many head outdoors. But when the sun is too strong, we need to take care of our health during strenuous activities. This is where the heat stress index comes into play, calculated by the weather station. It is based on the Wet Bulb Globe Temperature, which considers the key heat factors in the environment. The four warning levels help you stay safe and healthy on hot days. Breathe easy – with the air quality display How clean is the air you breathe? The local AQI (Air Quality Index) shows you directly whether the air in your surroundings is clean. Also, current data on pollutant exposure from PM2.5, PM10, NO2, SO2, O3, and CO from the internet are available at the press of a button. For data measured directly on-site, you can expand your weather station with optional CO2 sensors (not included), in addition to optional thermo-hygro sensors (not included) or water detectors (not included). Keep an eye on the climate with the help of a versatile weather expert: the BRESSER 9-in-1 MeteoChamp HD WiFi Weather Station. FEATURES BASE STATION Weather station with HD display for various display modes Display of the exact measurement data from the 9-in-1 outdoor sensor (outdoor temperature, outdoor humidity, wind speed, wind direction, precipitation amount, UV level, light intensity, WBGT, air pressure) Heat stress index based on WBGT Weather forecast (14 days / 24 hours) including temperature and precipitation probability WiFi connection for sharing and retrieving local data on platforms like ProWeatherLive (3 years membership included), WeatherUnderground, and Weathercloud Indoor temperature (°C/°F) and humidity Display of internet data on local AQI value (Air Quality Index) and the 6 most important pollutants (PM2.5, PM10, NO2, SO2, O3, CO) Multi-channel overviews of live data from all wireless sensors Felt outdoor temperature and dew point Max/min value memory with timestamp Trend graphs over 72 hours for all sensors Data storage with export function High/low value alarm for various measurements Weather data calibration Alarm clock with frost warning Time and date (internet time synchronisation) Moon phase, sunrise/sunset, moonrise/moonset Expandable with the following optional sensors: Up to 7x thermo-hygro, ground, and/or pool sensors (not included) Up to 7x water detectors (not included) 1x PM2.5/10 sensor (not included) 1x CO2 sensor (not included) 1x HCHO and VOC sensor (not included) 1x lightning sensor (not included) Various backgrounds adjustable Power supply: Power plug (included), CR2032 back-up battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES MULTISENSOR Measures temperature, humidity, wind speed, wind direction, precipitation amount, UV level, light intensity, air pressure, WBGT Operates via a large movable solar panel If there is insufficient sunlight, operates on 3x AA batteries (not included) Waterproof housing High range up to 150 m SCOPE OF DELIVERY Base station including power plug 9-in-1 outdoor sensor Manual

Available

€429.00* €449.00* (4.45% saved)
BRESSER 4CAST 18,5" WiFi Home Weather Station with 8-in-1 Sensor
The BRESSER 4CAST 18.5" Wi-Fi Weather Station with 8-in-1 Sensor gives you the ultimate weather overview at a glance. Its huge display brings together a wealth of local measurements and online climate data. The highlights: a detailed 14-day forecast and Wet Bulb Globe Temperature with heat stress level. And with built-in Wi-Fi, the weather information is always just a tap away - wherever you are.Smarter forecasts with Wi-Fi Planning a barbecue or other outdoor events? Thanks to the local 14-day and 24-hour forecast you’ll always pick the perfect moment. Alongside temperature highs and lows and rain probability, the ProWeatherLive server also delivers local visibility and cloud cover directly to your screen. And if you want to share your own measurements, simply upload them via Wi-Fi to ProWeatherLive or Weathercloud - and join the global weather community. 8-in-1 outdoor sensor - your complete weather toolkit The 8-in-1 sensor is a powerhouse of precision. Temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity and WBGT - all captured by one compact device. Its large adjustable solar panel powers the unit sustainably, while three AA batteries (not included) step in when the sun doesn’t shine. With a range of up to 150 metres, you can place it exactly where it delivers the most accurate readings. WBGT - stay safe in the heat When summer temperatures soar, your health can be at risk. The Wet Bulb Globe Temperature combines three key values - air temperature, mean radiant temperature and wet-bulb temperature - to give a precise picture of heat stress on your body. If the crucial humidity-based wet-bulb value stays above 35 °C for too long, your body absorbs heat from its surroundings - and that can be dangerous. Whether exercising, gardening or enjoying the outdoors, this professional station keeps the WBGT value in sight, while the heat stress index shows you instantly when it’s time to take a break. The digital weather station as indoor climate advisor Comfort doesn’t stop at the front door. The base station’s built-in thermometer and hygrometer keep track of indoor temperature and humidity. The comfort indicator gives a quick visual cue if your living room, bedroom or office could do with an adjustment. The station also monitors air pressure - ideal for spotting changes in the weather before they arrive. Everything you need - indices and alerts This garden weather station calculates all the extras: feels-like temperature, heat index, dew point and wind chill. The Beaufort scale reveals how powerful the wind really is, while the max./min. memory lets you track trends at a glance. And with ProWeatherLive alerts, you’ll never be caught unprepared. With its rain gauge and more, this station quickly becomes your reliable all-weather partner.Get your complete weather insight today with the BRESSER 4CAST 18.5" Wi-Fi Weather Station with 8-in-1 Sensor! FEATURES BASE STATION Huge, easy-to-read 18.5-inch display (47 cm) Local 24-hour/14-day forecast with highs, lows and chance of rain via ProWeatherLife server Wi-Fi connection for sharing local data on ProWeatherLive or Weathercloud Local visibility and cloud cover via ProWeatherLive server Indoor temperature and humidity with comfort indicator Air pressure monitoring Precise readings from the 8-in-1 solar outdoor sensor (temperature, humidity, wind speed/direction, rainfall, UV level, light intensity, WBGT) Heat stress index Beaufort scale (wind strength classification) Weather indices (feels-like temperature, heat index, dew point, wind chill factor) Time, date, weekday and moon phase Sunrise/sunset and moonrise/moonset Max./min. memory Weather alerts via ProWeatherLive Backlight with auto-dimmer WSLink app for simple Wi-Fi setup, data calibration and firmware updates Compatible with optional sensors (not included, see BRESSER accessories): Optional thermo-hygro sensors for indoor climate Optional soil and pool sensors for garden use Optional water and lightning detectors Optional PM2.5/10, CO2 and HCHO+VOC sensors for air quality Power supply: mains adapter (included), 1x CR2032 back-up battery (not included)Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES SENSORS Measures temperature, humidity, wind speed/direction, rainfall, UV level, light intensity and WBGT Powered by large adjustable solar panel Runs on 3x AA batteries (not included) when sunlight is insufficient Waterproof housing Long transmission range up to 150 m SCOPE OF DELIVERY Base station with mains adapter 8-in-1 sensor Instruction manual

Available

€599.00*
%
BRESSER 11-Day 4Cast CV Wi-Fi Weather Station 7-in-1
With the BRESSER 11-Day 4Cast CV WiFi Weather Station 7-in-1 you’ll never find yourself left out in the cold by the weather again. The weather station, with 7-in-1 solar outdoor sensor, supplements the on-site data with plenty of practical information from the ProWeatherLive platform. A special highlight: the extensive weather forecast, with the outlook for the next 11 days and a detailed overview of the next 24 hours. Information on local visibility and cloud cover also helps passionate amateur meteorologists to keep a close eye on the weather. You’ll always be up to date, whenever and wherever you are – choose to view your data, incl. max./min. values, conveniently on the clear display of the weather station, in the ProWeatherLive app or in a web browser. Environmentally-friendly and user-friendly – weather station with solar sensor Quick to install and connect to the base station, the 7-in-1 wireless sensor reliably supplies data measured directly on site, including temperature, humidity, wind speed, wind direction, precipitation amount, UV level and light intensity. Meanwhile, the power of the sun ensures smooth operation via the large solar panel. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries as a back-up during installation and they will take care of the power supply. A comfortable indoor climate with the WiFi weather station Outdoors, the weather station puts in a great performance with anemometer and rain gauge as well as thermometer and hygrometer, UV and light sensors. What about the climate indoors? A thermo-hygro sensor has been integrated into the base station so that you can always keep an eye on the indoor temperature and humidity. The trend display, which can be called up directly on the display, is perfect for preventing excessively dry air or mould. Trends you will be able to see include development of the room climate, so that you can respond by introducing fresh air or by humidifying if you need to. In addition, with ProWeatherLife, you can receive notifications when the indoor temperature and humidity change, as well as important weather parameters. Optional extensions for your WiFi weather station Want to adapt your weather station to your needs? No problem! It comes with a range of optional extensions through the following additional sensors (not included): Optional thermo-hygro sensors for indoor climate Optional soil and pool sensors for the garden Optional water detector and lightning sensors Optional PM2.5/10, CO2 and HCHO+VOC sensors for air quality For the perfect extensions, browse our BRESSER accessories to see which additional sensors are compatible (not included). Stay up to date on your local weather and indoor climate easily, whenever and wherever, with the BRESSER 11-Day 4Cast CV WiFi Weather Station 7-in-1. BASE STATION FEATURES Graphic weather forecast for the next 11 days (today and next 10 days)/for 24 hours (now and next 23 hours) from the ProWeatherLife server 11-day forecast for maximum and minimum temperature, as well as average temperature and chance of precipitation from the ProWeatherLife server Local visibility and cloud cover via the ProWeatherLive server WiFi connection for publishing local weather data on ProWeatherLive and up to 2 other weather platforms (e.g. AWEKAS) Indoor temperature (°C/°F) and humidity with trend Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Trend graph for air pressure, precipitation, temperature (indoor/outdoor) or humidity (indoor/outdoor) on the display Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Wind gusts and average wind speed, Beaufort scale (wind speed scale) Sunburn time display Air pressure Set weather notifications via the ProWeatherLive server Maximum/minimum value memory Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm clock with frost alarm WSLink app for easy connection to WiFi and weather platform, weather data calibration and for firmware updates 7 languages for day of the week (EN, DE, FR, ES, IT, NL, RU) Supports additional optional sensors Power supply: Mains plug (included), CR2032 back-up battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES OF 7-IN-1 OUTDOOR SENSOR Measurement of temperature, humidity, wind speed, wind direction, precipitation quantity, UV level and light intensity Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included)Range: 150 mSize: 390 x 174 x 465 mm SCOPE OF DELIVERY Base station Solar-powered outdoor sensor Power adapter Instruction manual

Available

€289.00* €299.00* (3.34% saved)
%
BRESSER 7-in-1 WiFi Weather Station 4CAST with 6-Day Forecast
Stay on top of the weather with the BRESSER 7-in-1 WiFi Weather Station 4CAST with 6-Day Forecast! The weather station displays a 6-day weather forecast with maximum/minimum temperature readings, and also tells you the chance of rain. It also features a 10-inch colour display, which ensures that all the weather stats are easy to read. The modern Wi-Fi weather station with a solar-powered sensor obtains the forecast data via the Internet from the ProWeatherLive platform. In addition to the weather forecast, the weather station also displays the local visibility and cloud cover. Eco-friendly weather station with solar-powered sensor, ideal for amateur meteorologists The weather station comes with a solar-powered outdoor sensor, which is powered by solar energy and measures temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity. Simply align the large solar panel with the sun according to your location. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries (not included) as a back-up during installation, and they will take care of the power supply. All the measurements will appear on the screen of the base station, which can be located up to 150 metres away. Wi-Fi weather station with feature-packed base station The base station of the 6-day 4CAST PRO SF weather station features a stylish design and displays the data received from the solar-powered sensor. It also takes its own readings via the built-in thermo/hygro sensor, which measures the ambient indoor temperature, humidity and air pressure. Together with the maximum/minimum memory, this enables you to keep an eye on the indoor climate and effectively prevent mildew and excessively dry air. Outdoor temperature, precipitation and more – you can also view the maximum/minimum readings for the other measurements made by the solar-powered sensor. Share weather data and use it with your smart home Access the measurements from your solar-powered sensor remotely and share them with others: with a few clicks, you can send your weather station data to the ProWeatherLive platform. If you have a smart home, you can also make use of the German-language portal AWEKAS, which allows you to transfer measurement data from the solar-powered sensor to your smart home system free of charge. Simply follow the link below to set up the weather station for your smart home system: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ Never lose track of time In addition to its elegant, contemporary design, the 4CAST PRO SF Wi-Fi weather station allows you to keep track of the time, date, day of the week and moon phase via the large display. For people who enjoy watching the sunset or observing the moon, the weather station also displays the sunrise/moonrise and sunset/moonset times.  Solar-powered weather data: Stay informed of the weather with the BRESSER 7-in-1 WiFi Weather Station 4CAST with 6-Day Forecast! BASE STATION FEATURES 6-day weather forecast (today and 5 following days) Large 10” colour display with stylish design Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) Dimensions: 219 x 200 x 26 mm Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES OF 7-IN-1 OUTDOOR SENSOR Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm DELIVERY CONTENT Base station Solar-powered outdoor sensor Power adapter Instruction manual

Available

€219.00* €319.00* (31.35% saved)
BRESSER 8-in-1 MeteoTemp JW Wi-Fi Home Weather Station
However unpredictable the weather might be, the BRESSER 8-in-1 MeteoTemp JW Wi-Fi Home Weather Station is always reliable. Its powerful 8-in-1 outdoor sensor gives you highly accurate data recorded right on your doorstep. Thanks to the Wi-Fi connection, you can easily share this information on platforms like ProWeatherLive, Weather Underground, or Weathercloud and access it anytime. With useful features like weather forecast, heat stress index, and alert functions, you’ll always be prepared for whatever the weather throws at you! WBGT and heat stress index – stay safe on hot days When the summer sun is beating down, the WBGT value (Wet Bulb Globe Temperature) and heat stress index help you plan outdoor activities safely. The four warning levels make it quick and easy to see what precautions you need to take for the current conditions. Perfect for athletes, outdoor enthusiasts and as garden weather station. Accurate measurements with the outdoor sensor Get precise data where it matters most. Once positioned correctly, the robust multi-sensor captures outdoor temperature, humidity, wind speed, wind direction, rainfall, UV levels, light intensity, and WBGT reliably. For planning the next 12 to 24 hours, check the graphical weather forecast based on data from the integrated barometer. Additional features make everyday life easier Is it too wet for the garden? Is it too windy for a walk in the park? The high/low-value alerts keep you informed of sudden changes in the weather. You can also monitor long-term trends with the max/min value memory and historical data storage (hourly data for 24 hours). To help maintain a healthy indoor environment, the weather station also includes a built-in thermo-hygrometer. Bring home your reliable weather assistant today with the BRESSER 8-in-1 MeteoTemp JW Wi-Fi Home Weather Station!FEATURES BASE STATIONWeather station with a large 10" (25.4 cm) display for comprehensive weather information Display of exact measurements from the 8-in-1 outdoor sensor (outdoor temperature, humidity, wind speed, wind direction, precipitation, UV levels, light intensity, WBGT) Wi-Fi connection to publish local weather data on online platforms such as Weather Underground, Weathercloud, and ProWeatherLive (3 years of membership included) Heat stress index Weather forecast Air pressure Indoor temperature and humidity Indoor climate comfort indicator Max./min. value memory High/low-value alarm for all relevant measurement parameters Historical memory (hourly for 24 hours) Feels like temperature, heat index, dew point, wind chill factor with trend Automatic time and date setting via the Internet Moon phase, sunrise and sunset times Alarm clock with frost alert function Expandable with up to 7 optional sensors (not included) Power supply: Mains adapter (included), CR2032 backup battery (not included) FEATURES SENSOR Measures temperature, humidity, wind speed, wind direction, precipitation, UV levels, light intensity, and WBGT Waterproof housing High range of up to 150 m Battery-powered: 3 x AA batteries (not included)Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. SCOPE OF DELIVERY Base station with power supply 8-in-1 multi-sensor Instruction manual

Available

€249.00*