BRESSER 59-42320 Spare Bulb LED connecter plug

Slides and cover glasses are an indispensable accessory which has also impact on the image quality. For most biological microscopes, the cover glass thickness is an important optical parameter, which is therefore included in the optical design and, if so, printed on the sleeve of every objective. You can usually see the number 0.17 which is the thickness in millimeters. For demanding applications in the laboratory, or for microphotography, using cover glasses with the desired thickness and high quality is necessary.The cover glasses included in the set are made of Boro 3.3 glass and are standardized to a thickness of 0.16-0.19mm. So they match the desired 0.17mm really good and give the best possible image quality. These Boro 3.3 cover glasses are pure white, without streaks and are pre-cleaned and ready to use. They are also especially suitable for fluorescence microscopy.The slides are made of soda lime glass, and have ground edges for safe handling. They have a matte field for writing on both sides (top and bottom). Slides and cover glasses are packed separately and in a vacuum sealed bag, containing moisture absorbent. They can be stored for a long time without loss of quality from hydrolysis and are easy to take out.

The immersion oil is used as a medium to get focus with a 100x oil objective. Without this oil it's not possible to get a sharp image.Volume: 5 ml

The set slides / cover plates is use to make Preparations for biological microscopes. The slide holds the preparation it will be covered with a cover plate.SCOPE OF DELIVERY50 blank slides 76x26mm100 cover plates (0,17mm thickness)These BRESSER slides and cover glasses are compatible with the following BRESSER microscopes:Duolux (5012000)BioDiscover (5013000)BIORIT (5101000)Erudit DLX (5102000)ERUDIT MO (5110000)Researcher Bino (5722100)Researcher Trinocular (5723100)LCD microscope (5201000, 5201002)Science TRM 301 (5760100)BioScience Bino (5750500)BioScience Trino (5750600)Science ADL 601 P (5770200)Science ADL 601 F (5770500)Science MPO 401 (5780000)Science IVM-401 (5790000)

Photo adapters are used to mount a camera on a microscope. SLR cameras work without their own objective. The magnification is made only by the microscope objectives. A specific T2-ring is necessary!With the BRESSER photo adapter 23 mm reflex cameras can be connected to microscopes with a eyepiece tube diameter of 23 mm. The camera is connected to the photo adapter via an optionally available T2 ring. The photo adapter is put into the eyepiece tube of the microscope instead of the eyepiece. Depending on type of construction and sensor or film size shadows may occur at the margins of the image.This photo adapter is compatible with the following BRESSER microscopes:Researcher Bino (5722100)Researcher Trinocular (5723100)Analyth Bino (5730000)BioScience Bino (5750500)Biolux ICD (5802000)Advance ICD (5804000)

With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely. When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass. With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows. FEATURES complete set for safe cleaning of camera lenses bellows for removing coarse dirt particles and fluff without scratching the lens lint-free microfibre cloth approx. 14,5x14,5cm lens cleaning pencil for safe cleaning of optical and coated glass SCOPE OF DELIVERY 1x bellows 1x lens cleaning pen 1x microfiber cloth

NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. With the included smartphone camera adapter you can take pictures of your observations right through the telescope's eyepiece. Moon, planets, stars – the BRESSER Polaris-II 102/600 EQ3 lens telescope takes beginners a lot closer to the beauties of the universe. The complete set comes with everything you need to admire the night sky: the astronomical lens telescope with 102 mm aperture and 600 mm focal length, the equatorial mount, the tripod and a wide range of accessories for exciting astronomical observations. Explore the fascinating surface of the moon and marvel at the sight of the planets. But you can go even further than that, because the entry-level telescope also shows you star clusters and gas nebulae in the deep sky range. Operation is very easy – so you are off to a successful start in astronomy in no time. Getting started in astronomy with a classic – the telescope Effortless handling, impressive images: As an easy-to-use Fraunhofer-type achromatic refractor, this classic lens telescope is the perfect first telescope for beginners and children. Thanks to its modern, precisely coated optics, it offers good imaging properties as well. The 102 mm aperture already collects a lot of light from the celestial objects. In addition, 102 mm aperture and 600 mm focal length result in an average focal ratio (ratio of aperture to focal length) of about 1 to 6 (F/6). Because of this average focal ratio the beginner’s telescope is an all-rounder for all celestial objects. So observe interesting details on the moon and planets with high magnifications. Or choose a medium to low magnification and admire the sight of open star clusters such as the Pleiades, globular clusters like M13 or gas nebulae like the Orion Nebula M42. Speaking of magnifications: How big will the celestial objects appear through this telescope for beginners? The aperture of 102 mm achieves a resolving power that easily allows magnifications of up to about 200x with sharp images. Technically, the telescope can do more. However, with increasing magnification, the images can become blurred. And the telescope is not the only factor determining the possible degree of magnification. The air turbulence in the atmosphere (seeing conditions) also plays a major role. Solid base for your celestial exploration – mount and tripod Found the perfect observation site? Then set up the telescope on the height-adjustable aluminium tripod with equatorial mount. The advantage of equatorial mounts: Unlike with an azimuthal mount, you don’t have to move both axes at the same time. Instead, one axis is simply aligned parallel to the Earth's axis at the beginning. In this so-called alignment, you point the axis in the direction of the polar star. After that, you can track the celestial bodies just on this one axis. Another benefit of this mount: you move the axes via two flexible shafts with fine adjustment. Perfect for delicate as well as comfortable adjustment and tracking of the entry-level telescope. To ensure that your accessories are always within reach during fascinating discoveries, there is an extra storage plate between the tripod legs.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable! Everything for your first steps in stargazing – the accessories The astronomy set contains lots of accessories so that you can immediately set off on your discovery tour of the night sky. Use the LED finder to precisely align your beginner's telescope and thus find celestial objects more easily. You just have to install the direction finder in parallel on your telescope. It projects a red dot onto a small ground-glass screen that appears to be floating in front of the sky when you look through. Since the aperture of your telescope points in the exact same direction, this helps you to keep track of the night sky. Two eyepieces (K-20mm, K-4mm) are included so that you can admire celestial bodies in two different magnifications. Still not enough for you? Then simply triple the magnification of the eyepieces with the 3x Barlow lens. And should you ever wish to change perspective during your astronomical observations, the standard tube diameter of 31.7 mm (1.25 inch) gives you a wide choice of additionally available eyepieces. The 90-degree star diagonal mirror, on the other hand, provides more convenience and a comfortable view. Even if your entry-level telescope is pointed vertically upwards, you can simply look in from the side. Discover the wonderful world of astronomy with the BRESSER Polaris-II 102/600 EQ3 lens telescope. FEATURES Telescope for beginners with 102 mm aperture and 600 mm focal length Achromatic refractor type Fraunhofer Good for observing Moon and planets as well as deep sky objects such as star clusters and gas nebulae Height-adjustable tripod with equatorial EQ3 mount Easy to use, very good for beginners Objective sun filter for solar observation included Smartphone holder for photography through the telescope Focal ratio F/6, thus well usable in all magnification ranges 50.8 mm (2 inch) focuser with adapter to 31.7 mm (1.25 inch) Two eyepieces and one Barlow lens with 31.7 mm (1.25 inch) sockets for different magnifications Easy to transport and therefore well suited as a travel telescope SCOPE OF DELIVERY Refractor telescope Aluminium tripod Equatorial EQ3 mount Eyepieces: 4 mm and 20 mm (1.25 inch sockets) Barlow lens 3x (1.25 inch socket) Star diagonal mirror LED illuminated dot finder Smartphone holder Objective solar filter Accessory tray Astronomy software for download Instruction manual