BRESSER 7-in-1 Outdoor Sensor with Adjustable Solar Panel
This high-quality replacement part will quickly get your weather station back in working order.
- Please check compatibility
- You'll find an overview of all compatible devices below
- Base station not included!
Product number:
7803210
EAN:
4007922071985
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER 7-in-1 Outdoor Sensor with Adjustable Solar Panel"
This high-quality replacement part will quickly get your weather station back in working order.
IMPORTANT: Will this part fit your weather station?
This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices.
Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.
- 15197
- 15198
- 15199
- 15660
- 16269
- 16421
- 16427
- 16444
- 16511
- 7002541
- 7002582
- 7002586
- 7002610
- 7002620
- 7003200
- 7003210
- 7003220
- 7003230
- 7003240
- 7003300
- 7003360
- 7003400
- 7003500
- 7003510
- 7003700
- 7003800
- 7003900
- 7004406
- 7902541
- 7902586
- 7903200
- 7903210
- 7903220
- 7903230
- 7903300
- 7903500
- 7903510
- 9080600
- 9080700
- WSX3001000000
- WSX3001CM3LC1
- WSX3001CM3LC2
FEATURES
- Powered via a large movable solar panel
- In case of insufficient sunlight operation via 3x AA batteries (not included)
- Measures the temperature and humidity
- Measures the wind speed, wind direction and rainfall
- Measures the UV level and light intensity
- Range: up to 150 m
- Dimensions: 390 x 174 x 465 mm
SCOPE OF DELIVERY
- Solar-powered outdoor sensor
- Mounting materials
- Base station is not included!
- Instruction manual
| Assembly required: | No |
|---|---|
| Batteries included: | Yes |
| Batteries required: | Yes |
| Body material: | Plastic |
| Colour: | white |
| Extended warranty (years): | 5 |
| Features: | Alarm clock function , Temperature alarm , Weather forecast |
| Material: | Plastic |
| Measurement function: | Barometric pressure , Humidity (outside) , Light intensity , Outside temperature , Precipitation , UV level , Wind Direction , Wind speed |
| Net weight (without access.) (g): | 534 |
| Number of sensors included in the package: | 1 |
| Total height (mm): | 200 |
| Total length (mm): | 217 |
| Total width (mm): | 365 |
| Transmission frequency (MHz): | 868 |
| Transmission range (m): | 150 |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- RISK OF SUFFOCATION! Improper use of this product can lead to suffocation, especially in children. Therefore, it is essential to follow the safety information below. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a suffocation risk! This product contains small parts that could be swallowed by children! There is a suffocation risk!
- Risk of electric shock! This device contains electronic parts powered by a power source (power supply and/or batteries). Improper use of this product poses a risk of electric shock. An electric shock can cause serious to fatal injuries. Therefore, be sure to follow the safety information below. Never leave children unsupervised when handling the device! The device must only be used as described in the instructions, otherwise, there is a risk of electric shock!
- Explosion risk! Improper use of this product poses an explosion risk. Be sure to follow the safety information below to avoid an explosion. Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device and batteries, or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
- Risk of material damage! Improper handling may damage the device and/or accessories. Therefore, use the device only according to the following safety information. Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device for repair if necessary. Do not immerse the device in water! Do not expose the device to shocks, vibrations, dust, prolonged high temperatures, or extreme humidity. This may lead to malfunctions, short circuits, as well as damage to batteries and components. Only use the recommended batteries. Always replace weak or used batteries with a completely new set of fully charged batteries. Do not use batteries from different brands, types, or varying capacities. Remove batteries from the device when it is not used for an extended period.
- Risk of voltage damage! The manufacturer is not liable for voltage damage resulting from incorrectly inserted batteries!
Skip product gallery
Compatible Base Stations
BRESSER Additional / Spare Base Station for Weather Station 7003240
€159.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit.7003220
7003230
7003240
7003500
7003510
7003700
7003800
7003900
7009970
7009971
7009972
7009973
7009974
7009975
7009976
7009977
7009978
7009999
7803200
7803210
7803510/HC3
9080700
WSX3001000000Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
Graphic weather forecast for the next 11 days (today and next 10 days)/for 24 hours (now and next 23 hours) from the ProWeatherLife server
11-day forecast for maximum and minimum temperature, as well as average temperature and chance of precipitation from the ProWeatherLife server
Local visibility and cloud cover via the ProWeatherLive server
WiFi connection for publishing local weather data on ProWeatherLive and up to 2 other weather platforms (e.g. AWEKAS)
Indoor temperature (°C/°F) and humidity with trend
Displays precise measurement data from the 7-in-1 solar outdoor sensor
(Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity)
Trend graph for air pressure, precipitation, temperature (indoor/outdoor) or humidity (indoor/outdoor) on the display
Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index)
Wind gusts and average wind speed, Beaufort scale (wind speed scale)
Sunburn time display
Air pressure
Set weather notifications via the ProWeatherLive server
Maximum/minimum value memory
Displays the time, date, day of the week and moon phase
Sun/moonrise, sun/moonset
Alarm clock with frost alarm
WSLink app for easy connection to WiFi and weather platform, weather data calibration and for firmware updates
7 languages for day of the week (EN, DE, FR, ES, IT, NL, RU)
Supports additional optional sensors
Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY
Base station
No outdoor sensor included!Mains plug
Instruction manual
Available
BRESSER Additional / Replacement Base Station for the WSX3001 Professional Wi-Fi Weather Station
€299.00*
Would you like to view your weather data in an additional room? Are you looking for a gift to enable your neighbours to monitor your local weather? Or maybe the base station from your BRESSER Professional Wi-Fi Weather Station didn’t survive your recent move or your child’s latest tantrum? Whether you’re looking for an extension or a replacement, this base station will allow you to access all of your measurements on the large 20 cm screen. In addition to displaying the data from your 7-in-1 sensor (not included), it can also show the readings from up to 7 compatible additional sensors (not included).
Share your weather data worldwide
The base station can also be connected to online platforms such as Wundergound or Weathercloud so that you can share and access your weather data online. And with the German-language portal AWEKAS, you can integrate your measurements into your smart home system (configuration instructions: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/).
Additional base station – monitor the indoor climate in another room
If your existing base station is in the living room, you can place a second base station in the kitchen or your child’s bedroom to view your local weather data in an additional room. The base station features a built-in thermo-hygro sensor, which measures the ambient temperature and humidity and displays a smiley symbol to indicate the quality of the indoor climate. You can then take effective measures to prevent the risk of mould or dry air.
The additional base station is also ideal as a bedside clock. It features a built-in backlight that can be dimmed or switched off completely to ensure you get a good night’s sleep. And so that you wake up on time, it also has a practical alarm with a snooze function, as well as a frost warning function that triggers that alarm 30 minutes earlier when the outdoor temperature drops below -3°C – plenty of time to ensure that you get to work or school safely.
Access all the practical functions of your BRESSER Professional Wi-Fi weather station with this additional/replacement base station.
FEATURES
WiFi connection with internet time synchronisation and support for firmware updates
Publish your weather data on Wunderground or Weathercloud
Indoor temperature (°C/ °F) and humidity (%)
Displays the outdoor temperature (°C/ °F) and humidity (%)
Light intensity (Klux / Kfc / W/m²)
Displays the current UV index, exposure level and recommended protection
Displays the sunburn time (mins) based on the current UV level
Wind direction and speed (m/s; km/h; Knoten; mph)
Beaufort index (scale for measuring wind speed)
Air pressure with 24-hour history (hPa/inHg/mmHg)
Rainfall with history (day/week/month)
Graphical weather forecast for next 12-24 hours
Weather index (‘feels like’ function, dew point, heat index, wind chill factor)
Trend indicator shows the weather trends for the next few minutes
Visual comfort level indicator for room temperature and humidity
Phases of the moon
Sunrise and sunset times
Alarm with snooze function (5 minutes) and ice/frost warning
Weekday alarm
Min./max. memory (up to 24 hours)
LED backlight, amber-coloured
Wall bracket and table stand
Supports a 7-in-1 sensor and up to 7 indoor sensors (sensors are not included)
Dimensions: 215 x 172 x 29 mm and weight: 639 g
Power supply: Power adapter and 3x AAA batteries as backup batteries (batteries are not included)
Integrated Wi-Fi transmission to AWEKAS
Security protocol: supports WPA3 encryption for firmware version 1.09 and above
DELIVERY CONTENT
Base station with stand
Power adapter
Instruction manual
Available
BRESSER Additional / Replacement Base Station for the 7003220 6-Day 4CAST PRO SF Wi-Fi Weather Station
€175.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 70025417003200700321070032207003230700324070033607003500700351070037007003800700390070063009080700WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
6-day weather forecast (today and 5 following days)
Large 25.4 cm (10-inch) colour display with stylish design
Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive,
AWEKAS, Weather Underground or WeatherCloud
Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server
Local visibility and cloud cover via ProWeatherLive server
Indoor temperature (°C/°F) and humidity
Displays precise measurement data from the 7-in-1 solar outdoor sensor
(Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity)
Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index)
Gusts and average wind speed
Beaufort index (scale for measuring wind speed)
Sunburn time (in mins)
Air pressure
Weather data calibration
Weather alarm function via ProWeatherLive server
Maximum/minimum value memory (daily/total)
Backlight with automatic dimming function
Displays the time, date, day of the week and moon phase
Sun/moonrise, sun/moonset
Alarm with ice/frost warning
7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU)
Supports firmware updates
Supports up to 7 additional sensors (not included, see accessories)
Mounting options: Can be placed on tabletop with built-in stand or wall-mounted
Power supply: Mains plug (included), CR2032 back-up battery (not included)
SCOPE OF DELIVERY
Base station
Power adapter
External sensor not included!
Instruction manual
Available
BRESSER Additional / Spare Base Station for the Wi-Fi HD TFT Professional Weather Station 7003500
€229.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
7-inch HD TFT display (17.8 cm) with versatile display modes Multi-channel overview showing live data from all wireless sensors Displays accurate readings from the 7-in-1 outdoor sensor (not included): (temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity) Seamless WLAN transmission to the AWEKAS weather portal (German interface) WLAN for sharing data on up to 3 platforms (Weather Underground, ProWeatherLive, Weathercloud, plus one additional) Graphical weather history (24 hours / 30 days) Historical data exportable to a USB drive (USB not included) Indoor temperature (°C/°F) and humidity, with trend tracking Beaufort scale for wind classification Detailed weather forecasts Air pressure monitoring Weather indices: feels-like temperature, dew point, wind chill, heat Daily and overall max/min memory Weather data calibration options Hi/Lo alarm settings for extreme conditions Custom labels for additional sensors Syncs with internet UTC time; time zone selection included Alarm clock with volume control and frost alert Time, calendar, weekday, and moon phase displays Sunrise/sunset and moonrise/moonset information Customisable display settings: light or dark mode Adjustable display brightness and contrast; day and night modes Supports six languages: English, German, French, Italian, Spanish, Dutch OTA and USB firmware updates Works with up to 7 sensors (not included, available separately) Mounting options: desktop stand or wall mounting Powered by mains adapter (included) and a CR2032 backup battery (not included)
SCOPE OF DELIVERY Base station Power adapter No wireless sensorincluded! Instruction manual
Available
BRESSER Additional / Replacement Base Station for 7003510 MeteoChamp Weather Station
€329.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
Large 17.8 cm (7-inch) HD TFT colour display with various display modes
Multi-channel overviews for displaying all live data from the wireless sensors
Publish your weather data via Wi-Fi on up to 3 weather platforms
(ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform)
Measures the indoor temperature and humidity
Displays the graphical weather trend (last 24 hours)
Weather forecast
Beaufort scale display (scale for classifying the wind speed)
Air pressure
Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index)
Maximum/minimum value memory
Trend display for all temperature and humidity measurements
Historical data log, exportable to USB drive (not included)
Individually configurable weather alarm for different measurements
Weather data calibration
Synchronization with Internet UTC time with time zone selection
Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times
Built-in alarm with ice/frost alarm
Choose between dark or light display
Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually)
7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE)
Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system)
Supports up to 7 wireless sensors (not included, see accessories)
Mounting options: Can be placed on tabletop with built-in stand or wall-mounted
Power supply: Power adapter (included), CR2032 backup battery (not included)
SCOPE OF DELIVERY
Base station
Power adapter
External sensor not included!
Instruction manual
Available
Skip product gallery
Spare Parts
Black Wind Vane
€17.99*
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519670025417003200700321070032207003230700324070033607003500700351070035207003700700380070039007803200780321078035209080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000
Available
Black Rain Funnel
€17.99*
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519670025417003200700321070032207003230700324070033607003500700351070035207003700700380070039007803200780321078035209080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000
Available
Mounting rod and mounting hardware A
€24.90*
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:15196151971519815245154391544015656156571565870025417003200700321070032207003230700324070033607003500700351070035207003700700380070039007803200780321078035209080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000
Available
Battery compartment cover for 7-in-1 and 9-in-1 sensor
€4.99*
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519670025417003200700321070032207003230700324070033607003500700351070035207003700700380070039007803200780321078035209080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000
Available
Skip product gallery
Customers also bought
BRESSER Precision Thermo-Hygro Sensor
€34.95*
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre.
This device is compatible with weather stations with the following article numbers:
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
FEATURES
Temperature measurement function
Humidity measurement function
7 available channels
Built-in display, can also be used as a standalone solution without a weather centre
Temperature range: -20 ~ 60℃
Wireless frequency: 868 MHz
Ultra-long range of up to 150 m
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Outdoor sensor
Instruction manual
Available
BRESSER Spa and Pool thermometer
€39.00*
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home.
This device is compatible with weather stations with the following article numbers:
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
FEATURES
Floating pool sensor for measuring the water temperature
LCD display for displaying the temperature (°C/°F)
Wireless frequency: 868 MHz
Wireless transmission range of up to 30 m to optional base station
7 available channels
Waterproof (IPX7)
Powered by 2x AA batteries (not included)
DELIVERY CONTENT
Pool thermometer
Instruction manual
Available
BRESSER Soil Temperature and Moisture Meter
€39.00*
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions.
This device is compatible with weather stations with the following article numbers:
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
FEATURES
Wireless and compact soil sensor
Measures the soil humidity
Measures the soil temperature
Transmission interval: 60 seconds
Extra-long range of up to 150 metres
Cable length: approx. 140 cm
7 available channels
LED indicator for data transmission
Weatherproof housing
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Soil sensor
Instruction manual
Available
BRESSER Wi-Fi Gateway El Niño for 5-in-1 and 7-in-1 sensors
€129.00*
With the BRESSER Wi-Fi Gateway El Niño for 5-in-1 and 7-in-1 sensors, innovation flows through your weather data. This clever device allows you to access readings from your existing BRESSER weather station or various optional sensors (not included), wherever you are. It automatically uploads them to the most popular online platforms via Wi-Fi. With the built-in thermometer, hygrometer, and barometer, you can also monitor air pressure, indoor temperature, and humidity indoors.
A great upgrade: add Wi-Fi to your weather station
Already own a BRESSER weather station, but missing Wi-Fi to complete your meteorology setup? Check below to see if the Wi-Fi Gateway El Niño is compatible with your model. If it is, you can quickly transform your existing device into a Wi-Fi-enabled weather station. You can also add optional sensors (not included) for online data monitoring to enhance your weather tracking.
Always available: your weather data on online platforms
Stay up-to-date automatically: Your weather data is uploaded directly to platforms like ProWeatherLive, Weather Underground, and Weathercloud via the Wi-Fi Gateway. This allows you to share your station’s readings with the wider weather community. A handy extra: Three years of membership with ProWeatherLive are included with your purchase.
Customise your professional weather station
Do you have your own idea of what a weather station should look like? With the Wi-Fi Gateway for up to 20 sensors, you can create your perfect setup. Just consult the list of compatible BRESSER devices, and you’ll soon have your customised weather expert at your fingertips.
Whether you're expanding or starting from scratch, with the BRESSER Wi-Fi Gateway El Niño for 5-in-1 and 7-in-1 sensors, you can either bring your current weather station online or build your very own.
FEATURES
Compact Wi-Fi Gateway for automatically uploading local weather sensor data to online platforms Receives measurement data from optional weather sensors (not included) Publish data on ProWeatherLive (includes 3 years membership), Weather Underground, Weathercloud, and one additional platform Access your data online anytime, anywhere Measures indoor temperature, humidity, and air pressure Configure Wi-Fi, time, weather platforms, calibration, and firmware updates easily via the WSLink app Compatible with the following BRESSER weather stations:Item No: WSX3001 / 7003600QT5000 / 7003600GYE000 / 7003600CM3000 / 7003100QT5000 / 7003100HZI000 / 7003100GYE000 / 7003100CM3000 / 9080700 / 9080600 / 9080500 / 7003900 / 7003800 / 7003700 / 7003510 / 7003500 / 7003360 / 7003300 / 7003240 / 7003230 / 7003220 / 7003210 / 7003200 / 7002620 / 7002590 / 7002586 / 7002585 / 7002582 / 7002581 / 7002580 / 7002571 / 7002551 / 7002525**Item No.: 7002513 / 7002512 / 7002511 / 7002510 / 9602510 - exclusively LOT No. 1164820 and higher**Item No: 7002550QT5000 / 7002550GYE000 / 7002550CM3000 - exclusively LOT No. 973504 and higher**Compatible with many optional sensors (not included): 1x professional sensor (Item Numbers: 7802580 / 7803300 / 7803200 / 7803510) Up to 7x thermo-hygro sensors (Item Number: 7009971), soil sensors (Item Number: 7009972), or pool sensors (Item Number: 7009973) (not included) Up to 7x water detectors (Item Number: 7009975) (not included) 1x lightning sensor (Item Number: 7009976) (not included) 1x PM2.5/10 sensor (Item Number: 7009970) (not included) 1x CO2 sensor (Item Number: 7009977) (not included) 1x HCHO + VOC sensor (Item Number: 7009978) (not included) Mounting: Stand or wall mount Power supply: USB cable with power adapter
SCOPE OF DELIVERY
Gateway USB cable USB power adapter User manual ** Item No. and LOT No. are shown on the device and the packaging.
Available
%
BRESSER Water Detector
€29.00*
€45.00*
(35.56% saved)
Whether it’s the washing machine in your basement or the dishwasher in the kitchen, old appliances are susceptible to water leaks. The BRESSER water detector triggers a 90 dB alarm tone when it detects a leak. If the sensor is connected to your BRESSER weather station, a symbol will also appear on the display of your base station, allowing you to take action before the water causes serious damage.
Also a handy helper in aquaristics, where leaks occur frequently, for example when the sealing gasket on the external filter needs to be changed.
This device is compatible with weather stations with the following article numbers:
151961519715198152011543915440156591626916508165117002610700262070032007003210700322070032307003240700352070038007903200790321079032209080700
FEATURES
Water sensor for detecting water leaks
Loud 90 dB alarm tone
Range of up to 150 mCable length: approx. 140 cm
7 available channels
Wireless and compact design
Power supply: 2x AA batteries (not included)
DELIVERY CONTENT
Water detector
Instruction manual
Available
BRESSER Lightning Detector
€45.00*
The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels.
This device is compatible with weather stations with the following article numbers:
15196151971519815440162691650816511700261070026207003210700322070032307003240700352079032107903220
FEATURES
Lightning sensor for measuring lightning strikes
Displays a light signal when a lightning strike is detected
The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour
LED indicator for data transmission
Range of up to 100 metres
Adjustable sensor sensitivity (high/medium/low)
Power supply: 2x AA batteries (not included)
DELIVERY CONTENT
Lightning sensor
Instruction manual
Available
Skip product gallery
Customers also viewed
BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation
€149.00*
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.
Compatible with the following devices:151971519815199156601626916421164271644416511700254170025827002586700261070026207003200700321070032207003230700324070033007003350700336070034007003500700351070037007003800700390070044067902541790258679032007903210790322079032307903300790335079035007903510908060090807007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES
Measures the temperature and humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Solar power for longer battery lifespan
Range: up to 150 m
Power supply: 3x AA batteries (not included)
Dimensions: 420 x 170 x 213 mm
SCOPE OF DELIVERY
Wireless sensor with installation material
Base station not included!
Instruction manual
Available
BRESSER 7-in-1 Outdoor Sensor
€119.00*
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.
Compatible with the following devices:151971519815199156601642116427164441651170025417002582700258670026107002620700330070033607003400700350070035107004406780001179025417902586790323079033007903500790351090806007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES
Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre
Measures the outdoor temperature and outdoor humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Transmission range of up to 150 metres
Place in an unobstructed location in order to obtain accurate sunlight and rain data
Power supply: 3x AA batteries (not included)
SCOPE OF DELIVERY
Wireless sensor
Mounting materials
Base station is not included!
Instruction manual
Available
BRESSER 9-in-1 Outdoor Sensor with Adjustable Solar Panel
€119.00*
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.
Compatible with the following devices:151961519715198151991650816511700261070026207003520FEATURES
Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, air pressure, WBGT
Powered by large adjustable solar panel
Backup with 3x AA batteries if sunlight is low (not included)
Waterproof housing
Wireless range up to 150 m
SCOPE OF DELIVERY 9-in-1 outdoor sensor Mounting material No base station included! Instruction manual
Available
Replaceable Thermo-Hygro Sensor Module TH03 for Multi-Sensors
€24.90*
With this high-quality spare part, your BRESSER Multi outdoor sensor will be up and running again in no time.PLEASE NOTE: This sensor module is only compatible with certain sensor types. The sensor type is printed on the bottom of your sensor.This module is compatible with the following sensor types:15656/HC3
15657/HC3
15658/HC3
15663/HC3
16510/HC3
7802580/HC3
7803150/HC3
7803200/HC3
7803300/HC3
7803350/HC3
7803400/HC3
7803510/HC3
7803520/HC3
Available
BRESSER Additional / Replacement Base Station for the WSX3001 Professional Wi-Fi Weather Station
€299.00*
Would you like to view your weather data in an additional room? Are you looking for a gift to enable your neighbours to monitor your local weather? Or maybe the base station from your BRESSER Professional Wi-Fi Weather Station didn’t survive your recent move or your child’s latest tantrum? Whether you’re looking for an extension or a replacement, this base station will allow you to access all of your measurements on the large 20 cm screen. In addition to displaying the data from your 7-in-1 sensor (not included), it can also show the readings from up to 7 compatible additional sensors (not included).
Share your weather data worldwide
The base station can also be connected to online platforms such as Wundergound or Weathercloud so that you can share and access your weather data online. And with the German-language portal AWEKAS, you can integrate your measurements into your smart home system (configuration instructions: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/).
Additional base station – monitor the indoor climate in another room
If your existing base station is in the living room, you can place a second base station in the kitchen or your child’s bedroom to view your local weather data in an additional room. The base station features a built-in thermo-hygro sensor, which measures the ambient temperature and humidity and displays a smiley symbol to indicate the quality of the indoor climate. You can then take effective measures to prevent the risk of mould or dry air.
The additional base station is also ideal as a bedside clock. It features a built-in backlight that can be dimmed or switched off completely to ensure you get a good night’s sleep. And so that you wake up on time, it also has a practical alarm with a snooze function, as well as a frost warning function that triggers that alarm 30 minutes earlier when the outdoor temperature drops below -3°C – plenty of time to ensure that you get to work or school safely.
Access all the practical functions of your BRESSER Professional Wi-Fi weather station with this additional/replacement base station.
FEATURES
WiFi connection with internet time synchronisation and support for firmware updates
Publish your weather data on Wunderground or Weathercloud
Indoor temperature (°C/ °F) and humidity (%)
Displays the outdoor temperature (°C/ °F) and humidity (%)
Light intensity (Klux / Kfc / W/m²)
Displays the current UV index, exposure level and recommended protection
Displays the sunburn time (mins) based on the current UV level
Wind direction and speed (m/s; km/h; Knoten; mph)
Beaufort index (scale for measuring wind speed)
Air pressure with 24-hour history (hPa/inHg/mmHg)
Rainfall with history (day/week/month)
Graphical weather forecast for next 12-24 hours
Weather index (‘feels like’ function, dew point, heat index, wind chill factor)
Trend indicator shows the weather trends for the next few minutes
Visual comfort level indicator for room temperature and humidity
Phases of the moon
Sunrise and sunset times
Alarm with snooze function (5 minutes) and ice/frost warning
Weekday alarm
Min./max. memory (up to 24 hours)
LED backlight, amber-coloured
Wall bracket and table stand
Supports a 7-in-1 sensor and up to 7 indoor sensors (sensors are not included)
Dimensions: 215 x 172 x 29 mm and weight: 639 g
Power supply: Power adapter and 3x AAA batteries as backup batteries (batteries are not included)
Integrated Wi-Fi transmission to AWEKAS
Security protocol: supports WPA3 encryption for firmware version 1.09 and above
DELIVERY CONTENT
Base station with stand
Power adapter
Instruction manual
Available
BRESSER 5-in-1 Outdoor Sensor
€99.00*
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. You can check the LOT number on your unit as well as on the packaging.
Compatible with the following devices:
15200
15201
15659
16410
7002510, LOT number 1156743 or higher
7002511, LOT number 1156743 or higher
7002512, LOT number 1156743 or higher
7002513, LOT number 1156743 or higher
7002525
7002550CM3000
7002550GYE000
7002550MGU000
7002550QT5000
7002571
7002580
7002581
7002585
7002590
7002610
7002620
7800004
7800006
7800008
7800011
7902510
7902511
7902512
7902513
7902525
7902550
7902551
7902552
7902580
7902581
7902585
9080500
9602510
7002550000000
WSX1001CM3LC1
WSX1001CM3LC2
WSX1001000000
PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. You can check the LOT number on your unit as well as on the packaging.
FEATURES
Replacement wireless sensor, transmits data to the WiFi colour weather centre
Measures wind speed, wind direction, humidity, external temperature and precipitation
Transmission frequency: 868 MHz
Power supply: 3x AA batteries (not included)
SCOPE OF DELIVERY
Multifunctional external sensor
Mounting materials
No base station included
Instruction manual
Available
BRESSER Additional / Spare Base Station for Weather Station 7003240
€159.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit.7003220
7003230
7003240
7003500
7003510
7003700
7003800
7003900
7009970
7009971
7009972
7009973
7009974
7009975
7009976
7009977
7009978
7009999
7803200
7803210
7803510/HC3
9080700
WSX3001000000Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
Graphic weather forecast for the next 11 days (today and next 10 days)/for 24 hours (now and next 23 hours) from the ProWeatherLife server
11-day forecast for maximum and minimum temperature, as well as average temperature and chance of precipitation from the ProWeatherLife server
Local visibility and cloud cover via the ProWeatherLive server
WiFi connection for publishing local weather data on ProWeatherLive and up to 2 other weather platforms (e.g. AWEKAS)
Indoor temperature (°C/°F) and humidity with trend
Displays precise measurement data from the 7-in-1 solar outdoor sensor
(Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity)
Trend graph for air pressure, precipitation, temperature (indoor/outdoor) or humidity (indoor/outdoor) on the display
Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index)
Wind gusts and average wind speed, Beaufort scale (wind speed scale)
Sunburn time display
Air pressure
Set weather notifications via the ProWeatherLive server
Maximum/minimum value memory
Displays the time, date, day of the week and moon phase
Sun/moonrise, sun/moonset
Alarm clock with frost alarm
WSLink app for easy connection to WiFi and weather platform, weather data calibration and for firmware updates
7 languages for day of the week (EN, DE, FR, ES, IT, NL, RU)
Supports additional optional sensors
Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY
Base station
No outdoor sensor included!Mains plug
Instruction manual
Available
