Skip to main content Skip to search Skip to main navigation

BRESSER 7-in-1 WiFi Weather Station 4CAST with 6-Day Forecast

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

BRESSER 4CAST PRO SF WLAN-Wetter-Center 7-in-1 solar



Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
  • If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
  • The AC/DC adapter serves as a disconnecting device. - The device’s AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
  • CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
  • Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
  • The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery

Compatible Sensors

BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1565970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station. FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

Available

€34.95*
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

€39.00*
%
BRESSER 7-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003200700321070032207003230700324070033007003360700340070035007003510700370070038007003900700440690806009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Solar-powered outdoor sensor Mounting materials Base station is not included! Instruction manual

Available

€159.00* €169.00* (5.92% saved)
BRESSER PM2.5/10 Air Quality Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700321070032207003230700324070035207003700700380070039009080700 A useful extension to your BRESSER weather station, or also ideal as a practical standalone solution: This PM2.5/PM10 particulate meter will help you to keep track of the air that you breathe. The high-precision meter reliably detects two types of health-relevant particulate matter that causes air pollution: particles with a diameter of less than 10 μm (PM10) and less than 2.5 μm (PM2.5). Measurements – the current reading and the average particulate concentration from the past 24 hours – are displayed on the built-in display and on your weather centre. The base station can be placed at a distance of up to 150 metres from the meter. FEATURES High-precision PM2.5/PM10 meter Can be used alone or with select BRESSER weather stations LCD screen for displaying the current reading and the PM2.5/PM10 concentration from the past 24 hours Battery level indicator 4 available channels Transmission frequency: 868 MHz Range of up to 150 m Power supply: 3 rechargeable AA batteries (included) or USB port (cable included) DELIVERY CONTENT PM2.5/PM10 air quality meter 3 rechargeable AA batteries USB cable Instruction manual

Currently unavailable

€109.00*
%
BRESSER Water Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198152011543915440156597002610700262070032007003210700322070032307003240700352070038009080700 Whether it’s the washing machine in your basement or the dishwasher in the kitchen, old appliances are susceptible to water leaks. The BRESSER water detector triggers a 90 dB alarm tone when it detects a leak. If the sensor is connected to your BRESSER weather station, a symbol will also appear on the display of your base station, allowing you to take action before the water causes serious damage. Also a handy helper in aquaristics, where leaks occur frequently, for example when the sealing gasket on the external filter needs to be changed. FEATURES Water sensor for detecting water leaks Loud 90 dB alarm tone Range of up to 150 mCable length: approx. 140 cm 7 available channels Wireless and compact design Power supply: 2x AA batteries (not included) DELIVERY CONTENT Water detector Instruction manual

Available

€29.00* €45.00* (35.56% saved)
%
BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700320070032107003220700323070032407003300700335070033607003400700350070035107003600CM30007003600GYE0007003600QT500070037007003800700390070044069080600908070070031000000007003600000000WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 420 x 170 x 213 mm SCOPE OF DELIVERY Wireless sensor with installation material Base station not included! Instruction manual

Available

€139.00* €149.00* (6.71% saved)
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

€39.00*
BRESSER Precision Thermo-Hygro Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

€34.95*
BRESSER Lightning Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154407002610700262070032107003220700323070032407003520 The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels. FEATURES Lightning sensor for measuring lightning strikes Displays a light signal when a lightning strike is detected The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour LED indicator for data transmission Range of up to 100 metres Adjustable sensor sensitivity (high/medium/low) Power supply: 2x AA batteries (not included) DELIVERY CONTENT Lightning sensor Instruction manual

Available

€45.00*
Skip product gallery

Compatible Base Stations

BRESSER Additional / Replacement Base Station for Weather Station 7003400
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519970034007004406 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Weather station with 8” (20 cm) screen for detailed weather insights Displays accurate data from the 8-in-1 outdoor sensor (outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, WBGT) WiFi connection for sharing local weather data on platforms like Weather Underground and Weathercloud Heat stress index with four alert levels Indoor temperature and humidity with trend indicators Indoor climate comfort indicator Weather forecast and barometric pressure readings Max./min. memory High/low alerts for all relevant parameters Automatic time and date synchronisation via the internet*** Moon phase, sunrise/sunset display Alarm clock with frost alert Easy setup and calibration via the WSLink app Power source: mains adapter (included), CR2032 backup battery (not included) SCOPE OF DELIVERYBase station with power adapter No outdoor sensor included! Instruction manual

Available

€89.00*
BRESSER Additional / Spare Base Station for Weather Station 7003240
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Graphic weather forecast for the next 11 days (today and next 10 days)/for 24 hours (now and next 23 hours) from the ProWeatherLife server 11-day forecast for maximum and minimum temperature, as well as average temperature and chance of precipitation from the ProWeatherLife server Local visibility and cloud cover via the ProWeatherLive server WiFi connection for publishing local weather data on ProWeatherLive and up to 2 other weather platforms (e.g. AWEKAS) Indoor temperature (°C/°F) and humidity with trend Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Trend graph for air pressure, precipitation, temperature (indoor/outdoor) or humidity (indoor/outdoor) on the display Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Wind gusts and average wind speed, Beaufort scale (wind speed scale) Sunburn time display Air pressure Set weather notifications via the ProWeatherLive server Maximum/minimum value memory Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm clock with frost alarm WSLink app for easy connection to WiFi and weather platform, weather data calibration and for firmware updates 7 languages for day of the week (EN, DE, FR, ES, IT, NL, RU) Supports additional optional sensors Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station No outdoor sensor included!Mains plug Instruction manual

Available

€159.00*
BRESSER Additional / Spare Base Station for Weather Station 15198
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519715198 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time. FEATURES BASE STATION 24-hour and 14-day local forecasts with temperature highs, lows and rain probability (via ProWeatherLife server) Large 10-inch (25.4 cm) colour display Wi-Fi connection for publishing data to ProWeatherLive and Weathercloud Internet-based visibility and cloud cover Precise measurements from the outdoor sensor (not included) Indoor temperature and humidity with comfort indicator Air pressure display Heat stress index Beaufort scale for wind strength Weather indices: feels-like temperature, heat index, dew point, wind chill Max/min memory Weather alerts via ProWeatherLive Time, date, weekday and moon phase Sunrise/sunset and moonrise/moonset times Backlight with automatic dimmer WSLink app for easy Wi-Fi setup, data calibration and firmware updates Power supply: mains adapter (included), 1x CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Stand Power adapter

Available

€179.00*
BRESSER Additional / Replacement Base Station for Weather Station 7003300 from LOT No. 1605517 onwards
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002582700258670026207003100CM30007003100GYE0007003100HZI0007003100QT500070033007003600CM30007003600GYE0007003600QT5000908060070031000000007003600000000 Want to share your weather data with your immediate neighbours? Or do you need a replacement base station because your device didn’t survive the last house move or a wild game of tag with the kids? Whether as an extension or a spare part – get all the functions of your existing weather station with item number 7002530 back on screen in no time with this base station. FEATURES7.4-inch colour display for detailed time and weather information LC display contrast adjustment for different viewing angles Wi-Fi connection for publishing data on weather platforms such as AWEKAS, Weather Underground and Weathercloud Indoor temperature (°C/°F) and humidity with comfort indicator Display of outdoor temperature (°C/°F) and humidity UV index with UV level indicator Light intensity display Sunburn time display (min.) Wind speed display (gusts or average speed) Beaufort scale level (scale for classifying wind speed) Wind direction display (current and prevailing, based on 16 directions) Rainfall display (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Feels-like outdoor temperature Weather index for dew point, wind chill factor and heat index Min./max. value memory (up to 24 hours) High/low value alarm with flashing symbol on the display Alarm clock with ice/frost warning Time (internet time synchronisation), date, weekday and moon phase Sunrise and sunset Weather data calibration 3 display brightness levels: High / Low / Off 7 languages for weekday (EN/ DE/ FR/ ES/ IT/ NL/ RU) Supports firmware updates Security type: supports WPA3 encryption Supports one 7-in-1 wireless professional sensor Supports up to 7 additional wireless sensors (7009999, SP60010000000, SM60020000000) Dimensions: 202 x 138 x 38 mm / Weight: 510 g Power supply: mains adapter (included) and 3x AAA backup batteries (not included) Mounting: wall-mounted or stand SCOPE OF DELIVERY Base station No outdoor sensor included! Instruction manual

€149.00*
%
BRESSER Additional / Replacement Base Station for the WSX3001 Professional Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Would you like to view your weather data in an additional room? Are you looking for a gift to enable your neighbours to monitor your local weather? Or maybe the base station from your BRESSER Professional Wi-Fi Weather Station didn’t survive your recent move or your child’s latest tantrum? Whether you’re looking for an extension or a replacement, this base station will allow you to access all of your measurements on the large 20 cm screen. In addition to displaying the data from your 7-in-1 sensor (not included), it can also show the readings from up to 7 compatible additional sensors (not included). Share your weather data worldwide The base station can also be connected to online platforms such as Wundergound or Weathercloud so that you can share and access your weather data online. And with the German-language portal AWEKAS, you can integrate your measurements into your smart home system (configuration instructions: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/). Additional base station – monitor the indoor climate in another room If your existing base station is in the living room, you can place a second base station in the kitchen or your child’s bedroom to view your local weather data in an additional room. The base station features a built-in thermo-hygro sensor, which measures the ambient temperature and humidity and displays a smiley symbol to indicate the quality of the indoor climate. You can then take effective measures to prevent the risk of mould or dry air. The additional base station is also ideal as a bedside clock. It features a built-in backlight that can be dimmed or switched off completely to ensure you get a good night’s sleep. And so that you wake up on time, it also has a practical alarm with a snooze function, as well as a frost warning function that triggers that alarm 30 minutes earlier when the outdoor temperature drops below -3°C – plenty of time to ensure that you get to work or school safely. Access all the practical functions of your BRESSER Professional Wi-Fi weather station with this additional/replacement base station. FEATURES WiFi connection with internet time synchronisation and support for firmware updates Publish your weather data on Wunderground or Weathercloud Indoor temperature (°C/ °F) and humidity (%) Displays the outdoor temperature (°C/ °F) and humidity (%) Light intensity (Klux / Kfc / W/m²) Displays the current UV index, exposure level and recommended protection Displays the sunburn time (mins) based on the current UV level Wind direction and speed (m/s; km/h; Knoten; mph) Beaufort index (scale for measuring wind speed) Air pressure with 24-hour history (hPa/inHg/mmHg) Rainfall with history (day/week/month) Graphical weather forecast for next 12-24 hours Weather index (‘feels like’ function, dew point, heat index, wind chill factor) Trend indicator shows the weather trends for the next few minutes Visual comfort level indicator for room temperature and humidity Phases of the moon Sunrise and sunset times Alarm with snooze function (5 minutes) and ice/frost warning Weekday alarm Min./max. memory (up to 24 hours) LED backlight, amber-coloured Wall bracket and table stand Supports a 7-in-1 sensor and up to 7 indoor sensors (sensors are not included) Dimensions: 215 x 172 x 29 mm and weight: 639 g Power supply: Power adapter and 3x AAA batteries as backup batteries (batteries are not included) Integrated Wi-Fi transmission to AWEKAS Security protocol: supports WPA3 encryption for firmware version 1.09 and above DELIVERY CONTENT Base station with stand Power adapter Instruction manual

Available

€99.00* €299.00* (66.89% saved)
%
BRESSER Additional / Replacement Base Station for the 7003220 6-Day 4CAST PRO SF Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 6-day weather forecast (today and 5 following days) Large 25.4 cm (10-inch) colour display with stylish design Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€99.00* €175.00* (43.43% saved)
NATIONAL GEOGRAPHIC Additional / Replacement Base Station for Weather Station 9080600
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002582700258670026207003100CM30007003100GYE0007003100HZI0007003100QT500070033007003600CM30007003600GYE0007003600QT5000908060070031000000007003600000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 5.7'' colour display for detailed time and weather information Wi-Fi connection with internet time synchronisation Receives weather data from the 7-in-1 professional sensor (not included) and from the wireless thermo-hygro sensor (not included) via 868 MHz Publish your local weather station data on platforms such as Weather Cloud Displays time, calendar, day of the week, and moon phase Alarm function Ice/frost warning Indoor temperature (°C / °F) and humidity with comfort indicator Outdoor temperature (°C / °F) and humidity display UV level and light intensity display Gust and average wind speed display Wind direction display (based on 16 compass points) Rainfall display (hourly, daily, weekly, monthly, total) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure Feels-like outdoor temperature Weather index including dew point, wind chill, and heat index Min./max. value memory (up to 24 hours) Alarm with LED indicator Weather calibration 3 display brightness levels: High / Low / Off 7 language options for the day of the week Supports firmware updates Security type: supports WPA3 encryption from firmware version 2.0 Supports a wireless 7-in-1 professional weather sensor (not included) Supports up to 7 additional wireless sensors (not included – item no.: 7009999) Easy setup and updates via WSLink app SCOPE OF DELIVERY Base station Power adapter No outdoor sensor included! Instruction manual

Available

€119.00*
%
BRESSER Additional / Spare Base Station for Weather Station 7002586
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002582700258670026207003100CM30007003100GYE0007003100HZI0007003100QT500070033007003600CM30007003600GYE0007003600QT5000908060070031000000007003600000000 Get clarity on the current wind and weather: You have purchased the BRESSER WiFi ClearView Weather Station and now know your local wind speed, wind direction, humidity, temperature, precipitation values, as well as UV level and light intensity. But where should you put the base station? In the living room, your whole family will benefit from being able to glance quickly at the clear 21 cm TRUE BLACK colour display. But wouldn’t it also be great in the bedroom, so that as soon as you’ve switched off the alarm you’ll know whether blue sky and sunshine await? With this additional BRESSER base station, you don’t need to decide on just one room. Simply connect to your 7-in-1 external sensor and you have immediate access to your measured values in another room. You can count on the usual functions whenever you need them, including reliable local weather trend forecasts for the next 12 hours, displayed as graphics, so know when to organize a spontaneous BBQ. In the winter months, the frost alarm will alert you when the external temperature falls below -3 °C: Caution, risk of black ice! You can also see the date, day of the week, time and moon phases so you have an idea of the ‘signs of the times’. Plus, for a more long-term view, the memory function stores historical measured data from the past 24 hours. Time to give your BRESSER WiFi ClearView Weather Station a breath of fresh air Are there early signs of mould formation in your bathroom? Is the air in your children’s bedroom too dry because of the central heating? The additional BRESSER base station allows you to respond to unusual situations like these with utmost flexibility, as two stations mean two separate measured results for indoor temperature, humidity and air pressure. Position the device in a critical location and the integrated sensor will measure the current room temperature, humidity and air pressure at that location. A graphical room climate indicator will alert you when the air is optimal, too dry or too damp. In addition, you can also set an independent maximum/minimum value alarm with audible and light signal on the additional station itself. On the road often? In addition to the base station at home, you can use the WiFi function to access your measured data through weather portals such as AWEKAS any time, anywhere. Or, use AWEKAS to transmit your data to your Smart Home controller. Risk more than just a glance— this BRESSER base station displays reliable weather data from your 7-in-1 external sensor at an additional location. FEATURES 8.3” colour display (19.3 x 9.3 cm) for detailed time and weather information WiFi connection with internet time synchronisation Receives weather data from the 7-in-1 external sensor and from the optional wireless thermo-hygro sensors on 868 MHz Suitable for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud Integrated sensor for indoor temperature (°C/°F), humidity and air pressure External temperature (°C/°F), humidity, wind direction, wind speed, UV level and light intensity Precise wind direction display (16 directions) Graphical weather trend display (sunny, partly cloudy, overcast, rain, storm, snow) Beaufort index display (scale for measuring wind speed) Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation) Room climate indicator Weather index display for dewpoint, windchill factor and heat index Time, calendar, day of the week and moon phase display Alarm function with snooze button Ice/frost alarm Min./max. memory (up to 24 hours) Alarm with LED indicator 3 different display brightness levels High/Low/Off 7 languages for days of the week Firmware updates supported Supports up to 7 additional wireless sensors (optional) (item no. 7009999) Integrated WiFi transmission to AWEKAS SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Currently unavailable

€169.00* €179.00* (5.59% saved)
BRESSER Additional / Spare Base Station for the Wi-Fi HD TFT Professional Weather Station 7003500
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 7-inch HD TFT display (17.8 cm) with versatile display modes Multi-channel overview showing live data from all wireless sensors Displays accurate readings from the 7-in-1 outdoor sensor (not included): (temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity) Seamless WLAN transmission to the AWEKAS weather portal (German interface) WLAN for sharing data on up to 3 platforms (Weather Underground, ProWeatherLive, Weathercloud, plus one additional) Graphical weather history (24 hours / 30 days) Historical data exportable to a USB drive (USB not included) Indoor temperature (°C/°F) and humidity, with trend tracking Beaufort scale for wind classification Detailed weather forecasts Air pressure monitoring Weather indices: feels-like temperature, dew point, wind chill, heat Daily and overall max/min memory Weather data calibration options Hi/Lo alarm settings for extreme conditions Custom labels for additional sensors Syncs with internet UTC time; time zone selection included Alarm clock with volume control and frost alert Time, calendar, weekday, and moon phase displays Sunrise/sunset and moonrise/moonset information Customisable display settings: light or dark mode Adjustable display brightness and contrast; day and night modes Supports six languages: English, German, French, Italian, Spanish, Dutch OTA and USB firmware updates Works with up to 7 sensors (not included, available separately) Mounting options: desktop stand or wall mounting Powered by mains adapter (included) and a CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Power adapter No wireless sensorincluded! Instruction manual

Available

€229.00*
%
BRESSER Additional / Replacement Base Station for 7003510 MeteoChamp Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Large 17.8 cm (7-inch) HD TFT colour display with various display modes Multi-channel overviews for displaying all live data from the wireless sensors Publish your weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform) Measures the indoor temperature and humidity Displays the graphical weather trend (last 24 hours) Weather forecast Beaufort scale display (scale for classifying the wind speed) Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Maximum/minimum value memory Trend display for all temperature and humidity measurements Historical data log, exportable to USB drive (not included) Individually configurable weather alarm for different measurements Weather data calibration Synchronization with Internet UTC time with time zone selection Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times Built-in alarm with ice/frost alarm Choose between dark or light display Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually) 7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE) Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system) Supports up to 7 wireless sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter (included), CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€299.00* €329.00* (9.12% saved)
%
BRESSER Additional / Replacement Base Station for the 7003230 8-Day 4CAST XL Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 8-day weather forecast (today and 7 following days) Extra large 48.3 cm (19”) colour display with slim bezel Wide-angle display for easy reading of measurements when wall-mounted Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€359.00* €549.00* (34.61% saved)
%
BRESSER Additional / Spare Base Station for Weather Station 7003300 up to LOT No. 1599948
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002582700258670026207003100CM30007003100GYE0007003100HZI0007003100QT500070033007003600CM30007003600GYE0007003600QT5000908060070031000000007003600000000 Elegant and colourful: The additional base station allows you to view the data from your Wi-Fi comfort weather station in an additional room, such as a bedroom. The readings from your 7-in-1 outdoor sensor including outdoor temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity are transmitted wirelessly, giving your everything that you need to decide what to wear for the day. Built-in alarm The additional base station will help to give you a relaxing start to the day. It features a built-in alarm and a snooze button that silences the alarm to give you an extra few minutes in bed. The clock is synchronized automatically via the Internet to ensure that you won't be late to work. The modern LCD colour display can be viewed from any angle and shows you all relevant weather data including a weather forecast to help you decide what to wear for the day. The additional base station also displays a range of other useful data, including the perceived temperature, sunburn time, Beaufort level and historical data. Smart function for icy weather: Thanks to the built-in frost alarm, the alarm goes off 30 minutes earlier when the outdoor temperature drops below -3 °C. Create the perfect indoor climate with the additional base station In addition to the outdoor conditions such as rain, wind and sunshine, the indoor climate can have a big impact on our health and wellbeing. The base station features a built-in sensor that measures the room humidity and temperature and stores the maximum and minimum values. This helps you to take action to prevent excessively dry air in winter and stop mould from forming in rooms with a high humidity, such as the kitchen. An optimal indoor climate is indicated by a smiley face on the graphical comfort indicator. If the display shows a frowning smiley, this indicates that you need to take action to improve the indoor climate. Get a better overview of the weather and your indoor climate with the additional base station for your Wi-Fi Comfort Weather Station. BASE STATION FEATURES 7.4-inch colour display with detailed time and weather information LCD display with adjustable contrast for multiple viewing angles Wi-Fi connection for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud Indoor temperature (°C/°F) and humidity with comfort indicator Displays the outdoor temperature (°C/ °F) and humidity UV index with UV level indicator Light intensity display Sunburn time display (in mins) Wind speed display (gusts or average wind speed) Beaufort scale display (scale for classifying the wind speed) Wind direction display (current and predominant, 16 directions) Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation) Weather forecast (sunny, partly cloudy, overcast, rain, storm, snow) Atmospheric pressure display Perceived outdoor temperature Weather index for dewpoint, windchill factor and heat index Min./max. memory (up to 24 hours) High/low alarm with flashing symbol on the display Alarm with ice/frost warning Time (synced via the Internet), date, day of the week and moon phase Sunrise and sunset Weather data calibration 3 different display brightness levels High/Low/Off 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports 7-in-1 wireless sensor (not included) Supports up to 7 additional wireless sensors (not included) Dimensions: 202 x 138 x 38 mm / Weight: 510 g Power supply: Power adapter (included) and 3x AAA backup batteries (not included) Installation: Wall or stand DELIVERY CONTENT Base station Power adapter External sensor not included! Instruction manual

Currently unavailable

€117.00* €149.00* (21.48% saved)
%
BRESSER Additional Base Station for the 7003200 4-Day 4CAST Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.700320070032107003360 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 4-day weather forecast (today and 3 following days) with symbols Receives weather data from the 7-in-1 outdoor sensor Wi-Fi connection for sharing local weather data on the ProWeatherLive platform Forecast for maximum and minimum temperature and chance of rainfall via ProWeatherLive Weather warnings via ProWeatherLive server Indoor temperature (°C/°F) and humidity with comfort indicator Displays the outdoor temperature (°C/ °F) and humidity Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed with trend indicator Beaufort index (scale for measuring wind speed) Wind direction display (current and predominant, 16 directions) UV level display Light intensity display Sunburn time display (in mins) Precipitation display (hourly, daily, weekly, monthly, total precipitation) Air pressure Weather data calibration Maximum/minimum value memory (daily/total) Colour display Backlight with automatic dimming function Time, calendar, day of the week and moon phase display Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter and CR2032 back-up battery (not included) Dimensions: 187 x 118 x 18 mm SCOPE OF DELIVERY Base station Power adapter Instruction manual

Available

€99.00* €149.00* (33.56% saved)
%
BRESSER Additional / Spare Base Station for Weather Station 7003210
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.700320070032107003360 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 6-day weather forecast (today and 5 following days) Wi-Fi connection for sharing local weather data on portals such as ProWeatherLive and AWEKAS Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity with comfort indicator Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Large colour display Backlight with automatic dimming function Time, calendar, day of the week and moon phase display Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) Dimensions: 215 x 176 x 25 mm SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Currently unavailable

€135.00* €179.00* (24.58% saved)
Skip product gallery

Spare Parts

Black Wind Vane
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519670025417003200700321070032207003230700324070033607003500700351070035207003700700380070039007803200780321078035209080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000

Available

€17.99*
Black Rain Funnel
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519670025417003200700321070032207003230700324070033607003500700351070035207003700700380070039007803200780321078035209080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000

Available

€17.99*
Replaceable Thermo-Hygro Sensor Module TH03 for Multi-Sensors
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:WARNING: For one or more compatible weather stations, compatibility must be checked not only by the item number but also by the lot number! If there is a lot number restriction, it is indicated in brackets next to the item number.15196 (from lot number 1609997)15197 (from lot number 1609998)15198 (from lot number 1609999)15199 (from lot number 1610000)15200 (from lot number 1610001)15201 (from lot number 1610002)15245 (from lot number 1610419)15439 (from lot number 1612530)15440 (from lot number 1612531)15656HC3 (Not compatible with HC2 and HC1!)15657HC3 (Not compatible with HC2 and HC1!)15658HC3 (Not compatible with HC2 and HC1!)15659 (from lot number 1613296)15660 (from lot number 1613297)15663HC3 (Not compatible with HC2 and HC1!)16479 (from lot number PO0000212)16509HC3 (Not compatible with HC2 and HC1!)16510HC3 (Not compatible with HC2 and HC1!)7002510 (from lot number 1604893)7002511 (from lot number 1605506)7002512 (from lot number 1605507)7002525 (from lot number 1605508)7002541 (from lot number 1603270)7002550CM3000 (from lot number 1604894)7002550GYE000 (from lot number 1603234)7002550MGU0007002550QT5000 (from lot number 1612624)7002580 (from lot number 1611741)7002581 (from lot number 1603236)7002582 (from lot number 1608426)7002585 (from lot number 1605512)7002586 (from lot number 1605513)7002590 (from lot number 838433)7002620 (from lot number 1600096)7003100CM3000 (from lot number 1611715)7003100GYE000 (from lot number 1059567)7003100HZI000 (from lot number 1059568)7003100QT5000 (from lot number 1226688)7003150 (from lot number 1600099)7003200 (from lot number 1605514)7003210 (from lot number 1604275)7003220 (from lot number 1602916)7003230 (from lot number 1602917)7003240 (from lot number 1603246)7003300 (from lot number 1605517)7003350 (from lot number 1606311)7003360 (from lot number 1605518)7003400 (from lot number 1596981)7003500 (from lot number 1602918)7003510 (from lot number 1602034)7003520 (from lot number 1600098)7003600CM3000 (from lot number 1610669)7003600GYE000 (from lot number 1274953)7003600QT5000 (from lot number 1077389)7003700 (from lot number 1590021)7003800 (from lot number 1611718)7003900 (from lot number 1604767)7004406 (from lot number 1600100)7802580HC3 (Not compatible with HC2 and HC1!)7803150HC3 (Not compatible with HC2 and HC1!)7803200HC3 (Not compatible with HC2 and HC1!)7803210HC3 (Not compatible with HC2 and HC1!)7803300HC3 (Not compatible with HC2 and HC1!)7803350HC3 (Not compatible with HC2 and HC1!)7803520HC3 (Not compatible with HC2 and HC1!)9080500 (from lot number 1603264)9080600 (from lot number 1608115)9080700 (from lot number 1604765)9080800 (from lot number 1604766)9602510 (from lot number 1164820)700255000000070031000000007003600000000WSX1001CM3LC1 (from lot number 874894)WSX1001CM3LC2 (from lot number 874894)WSX3001 (from lot number 1603270)WSX3001CM3LC1 (from lot number 1603270)WSX3001CM3LC2 (from lot number 1603270)WSX1001000000 (from lot number 874894)WSX3001000000 (from lot number 1603270)

Available

€24.90*
Mounting rod and mounting hardware A
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:15196151971519815245154391544015656156571565870025417003200700321070032207003230700324070033607003500700351070035207003700700380070039007803200780321078035209080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000

Available

€24.90*
Power supply 5V-1A (EU/UK) angled
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1489514993149981500415013151301519815199152431541816269164271647916511166307000023700002770000307002541700258270025867003150700321070032207003240700335070033607003400700370070038007003900700433070043407004350700436070043707004380700440670065007006510700651170072017007350700751170075207007620790254179025867903210790322079033509070600907070090707109080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000

Available

€14.99*
BRESSER Wind Cups (Version B)
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:WARNING: For one or more compatible weather stations, compatibility must be checked not only by the item number but also by the lot number! If there is a lot number restriction, it is indicated in brackets next to the item number.7003200 (from lot number 1590020)7003210 (from lot number 1590020)7003220 (from lot number 1590020)7003230 (from lot number 1590020)7003240 (from lot number 1590020)7003350 (from lot number 1590020)7003360 (from lot number 1590020)7003500 (from lot number 1590020)7003510 (from lot number 1590020)7003700 (from lot number 1590021)7003800 (from lot number 1590020)780320078032107803350WSX3001 (from lot number 1590020)WSX3001CM3LC1 (from lot number 1590020)WSX3001CM3LC2 (from lot number 1590020)WSX3001000000 (from lot number 1590020)

Available

€17.99*
Battery compartment cover for 7-in-1 and 9-in-1 sensor
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519670025417003200700321070032207003230700324070033607003500700351070035207003700700380070039007803200780321078035209080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000

Available

€4.99*
Skip product gallery

Accessories

%
BRESSER Additional / Replacement Base Station for the 7003220 6-Day 4CAST PRO SF Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 6-day weather forecast (today and 5 following days) Large 25.4 cm (10-inch) colour display with stylish design Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€99.00* €175.00* (43.43% saved)
BRESSER Precision Thermo-Hygro Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

€34.95*
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

€39.00*
BRESSER PM2.5/10 Air Quality Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700321070032207003230700324070035207003700700380070039009080700 A useful extension to your BRESSER weather station, or also ideal as a practical standalone solution: This PM2.5/PM10 particulate meter will help you to keep track of the air that you breathe. The high-precision meter reliably detects two types of health-relevant particulate matter that causes air pollution: particles with a diameter of less than 10 μm (PM10) and less than 2.5 μm (PM2.5). Measurements – the current reading and the average particulate concentration from the past 24 hours – are displayed on the built-in display and on your weather centre. The base station can be placed at a distance of up to 150 metres from the meter. FEATURES High-precision PM2.5/PM10 meter Can be used alone or with select BRESSER weather stations LCD screen for displaying the current reading and the PM2.5/PM10 concentration from the past 24 hours Battery level indicator 4 available channels Transmission frequency: 868 MHz Range of up to 150 m Power supply: 3 rechargeable AA batteries (included) or USB port (cable included) DELIVERY CONTENT PM2.5/PM10 air quality meter 3 rechargeable AA batteries USB cable Instruction manual

Currently unavailable

€109.00*
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

€39.00*
%
BRESSER Water Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198152011543915440156597002610700262070032007003210700322070032307003240700352070038009080700 Whether it’s the washing machine in your basement or the dishwasher in the kitchen, old appliances are susceptible to water leaks. The BRESSER water detector triggers a 90 dB alarm tone when it detects a leak. If the sensor is connected to your BRESSER weather station, a symbol will also appear on the display of your base station, allowing you to take action before the water causes serious damage. Also a handy helper in aquaristics, where leaks occur frequently, for example when the sealing gasket on the external filter needs to be changed. FEATURES Water sensor for detecting water leaks Loud 90 dB alarm tone Range of up to 150 mCable length: approx. 140 cm 7 available channels Wireless and compact design Power supply: 2x AA batteries (not included) DELIVERY CONTENT Water detector Instruction manual

Available

€29.00* €45.00* (35.56% saved)
BRESSER Lightning Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154407002610700262070032107003220700323070032407003520 The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels. FEATURES Lightning sensor for measuring lightning strikes Displays a light signal when a lightning strike is detected The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour LED indicator for data transmission Range of up to 100 metres Adjustable sensor sensitivity (high/medium/low) Power supply: 2x AA batteries (not included) DELIVERY CONTENT Lightning sensor Instruction manual

Available

€45.00*
BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1565970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station. FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

Available

€34.95*
%
BRESSER 7-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003200700321070032207003230700324070033007003360700340070035007003510700370070038007003900700440690806009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Solar-powered outdoor sensor Mounting materials Base station is not included! Instruction manual

Available

€159.00* €169.00* (5.92% saved)
Skip product gallery

Customers also bought

BRESSER Precision Thermo-Hygro Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

€34.95*
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

€39.00*
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

€39.00*
%
BRESSER Additional / Replacement Base Station for the 7003220 6-Day 4CAST PRO SF Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 6-day weather forecast (today and 5 following days) Large 25.4 cm (10-inch) colour display with stylish design Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€99.00* €175.00* (43.43% saved)
BRESSER Lightning Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154407002610700262070032107003220700323070032407003520 The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels. FEATURES Lightning sensor for measuring lightning strikes Displays a light signal when a lightning strike is detected The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour LED indicator for data transmission Range of up to 100 metres Adjustable sensor sensitivity (high/medium/low) Power supply: 2x AA batteries (not included) DELIVERY CONTENT Lightning sensor Instruction manual

Available

€45.00*
BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1565970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station. FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

Available

€34.95*
Skip product gallery

Customers also viewed

%
BRESSER 7-in-1 Solar 6-Day 4CAST PRO Wi-Fi Weather Station
Stay on top of the weather with the BRESSER 7-in-1 Solar 6-Day 4CAST PRO Wi-Fi Weather Station. The weather station features a stylish colour display and shows a reliable 6-day weather forecast. Data for the weather forecast is transferred from the ProWeatherLive platform to the solar-powered Wi-Fi weather station and displayed as a graphic symbol. The display also shows the local visibility and cloud cover from the ProWeatherLive server.  Eco-friendly solar-powered weather station The weather station comes with a solar-powered outdoor sensor, which provides reliable data for 7 local weather measurements: temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity. The measurements are then sent to the base station within a range of up to 150 metres. The large solar panel is easily brought into the perfect position. The built-in battery stores the solar energy to power the outdoor sensor in your garden or on your house or garage roof. Feature-packed base station In addition to an intuitive display that shows the measurements from the solar-powered wireless sensor, the base station also features numerous other functions. For example, it measures the indoor temperature, humidity and air pressure and features a comfort indicator that displays a smiley to show you whether the indoor climate is ideal. You can then take measures to prevent mildew and dry air. In addition, the solar-powered weather station also calculates a number of other useful readings such as the perceived temperature, sunburn time in minutes and the Beaufort index to help you choose the right clothes, avoid sunburn and ensure adequate wind protection. And in order to stay on top of the weather, the maximum/minimum memory allows you to keep an eye on the latest meteorological developments, either on a daily basis or from a certain point in time. Share data from your weather station and use it smartly Access your own measurements from anywhere and share them with others: with the solar weather station with rain gauge and anemometer and a weather platform such as ProWeatherLive, Weather Underground or WeatherCloud, you are just a few clicks away. You can also connect the weather station to the German portal AWEKAS. If you have a smart home, you can transfer measurement data from the solar weather station to your smart home system free of charge. To upload your readings, simply configure the settings as described in the following link: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ Solar-powered weather station with built-in clock and alarm Time, date, day of the week and moon phase - the 4CAST PRO Wi-Fi Solar Weather Station has everything that you need to stay on top of the time. It also displays the times for sunrise and sunset, as well as moonrise and moonset. No matter whether you're a late riser or early riser, the alarm clock with snooze function is guaranteed to wake you up in good time. When the ice/frost alarm is activated, the alarm goes off 30 minutes earlier if the temperature is below -3 °C, leaving you plenty to time to plan your journey. Get eco-friendly meteorological data - with the BRESSER 7-in-1 Solar 6-Day 4CAST PRO Wi-Fi Weather Station. BASE STATION FEATURES 6-day weather forecast (today and 5 following days) Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive and AWEKAS Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity with comfort indicator Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather alert settings via ProWeatherLife Weather data calibration Maximum/minimum value memory (daily/total) Intuitive colour display Backlight with automatic dimming function Time, calendar, day of the week and moon phase display Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) Dimensions: 215 x 176 x 25 mm Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES OF 7-IN-1 OUTDOOR SENSOR Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm DELIVERY CONTENT Base station Solar-powered outdoor sensor Power adapter Instruction manual

Available

€279.00* €299.00* (6.69% saved)
%
BRESSER Additional / Replacement Base Station for the 7003220 6-Day 4CAST PRO SF Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 6-day weather forecast (today and 5 following days) Large 25.4 cm (10-inch) colour display with stylish design Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€99.00* €175.00* (43.43% saved)
%
BRESSER 8-Day 4CAST XL 7-in-1 Wi-Fi Weather Station with Solar-powered Sensor
The BRESSER 8-day 4CAST XL 7-in-1 Wi-Fi Weather Station with a solar-powered sensor features a modern design with a huge 48.3 cm (19”) wide-angle colour screen for displaying your meteorological data. Ideal for offices, schools and plant nurseries – the base station is perfect for providing an overview of the weather in large rooms. In addition to displaying the data from your outdoor sensor, the Wi-Fi weather station can also connect to the Internet to display forecast data from the ProWeatherLive platform, including an 8-day weather forecast with maximum/minimum temperatures and the chance of rain, as well as the local visibility and cloud cover. Solar-powered weather station The weather station comes with an eco-friendly 7-in-1 outdoor sensor that operates via solar power and measures the temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. The sensor uses the sunlight as power-source. Simply align the large solar panel with the sun. In case the sun doesn't shine, 3 AA batteries (not included) serve as a backup. The data will then be displayed on your base station, which has a range of up to 150 metres. Wi-Fi weather station with feature-packed base station In addition to displaying the measurements from your outdoor sensor, the base station of the 8-day 4CAST XL Wi-Fi Weather Station also has many other functions. For example, it comes with a built-in thermo/hygro sensor which measures the ambient indoor temperature, humidity and air pressure. There is also a maximum/minimum memory – perfect for monitoring your indoor climate and preventing mildew and excessively dry air. The max/min values for outdoor, temperature, rainfall and other outdoor measurements can also be viewed on the display. In addition to weather data, the large screen has plenty of space for displaying the time, date, day of the week and moon phase. The sunrise/moonrise and sunset/moonset times are also displayed at the top of the screen. Share your weather data and connect to your smart home The readings from the wireless solar-powered sensor can be published on the Internet with a few simple clicks so that you can access your data remotely using the ProWeatherLive weather platform (with a web browser or the app). You can also send the measurements from your weather station to a smart home system free of charge using the German-language portal AWEKAS. Simply follow the link below to configure the settings: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ Solar-powered weather data: Monitor the local weather conditions with the BRESSER 8-day 4CAST XL 7-in-1 Wi-Fi weather Station with a solar-powered sensor. BASE STATION FEATURES 8-day weather forecast (today and 7 following days) Extra large 48.3 cm (19”) colour display with slim bezel Wide-angle display for easy reading of measurements when wall-mounted Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) Dimensions: 418 x 309 x 33 mm / Weight: 2031g Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES OF 7-IN-1 OUTDOOR SENSOR Powered via a large movable solar panel When there is insufficient sunlight, operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Power supply: Solar panel, 3x AA back-up batteries (not included) Range: up to 150 m Dimensions: 217 x 365 x 200 mm / Weight: 534g DELIVERY CONTENT Base station Solar-powered outdoor sensor Power adapter Instruction manual

Available

€549.00* €579.00* (5.18% saved)
BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor
Stay one step ahead of the weather with the BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor. Thanks to the large, clear 10-inch (25.4 cm) display, you’ll have all the key data in front of you at a glance. Standout features include the detailed forecast and the WBGT heat stress level, helping you stay safe and comfortable on hot days. And with a Wi-Fi connection, your personalised weather updates are always within easy reach - wherever you are. Comprehensive forecasts straight to your screen Planning a barbecue or a family outing? The local 24-hour and 14-day forecasts, including maximum and minimum temperatures and chance of rain, powered by the ProWeatherLife server, make it easy to pick the perfect time. This weather station with outdoor sensor also provides internet-based data on visibility and cloud cover. Want to share your readings? Simply publish them via Wi-Fi to ProWeatherLive or Weathercloud - and connect with the global weather community. 8-in-1 outdoor sensor: compact, precise, reliable This clever all-rounder measures temperature, humidity, wind speed and direction, rainfall, UV level, light intensity and WBGT. The large adjustable solar panel keeps it running sustainably, while 3 AA batteries (not included) step in when sunlight is limited. With a range of up to 150 m and a durable, weatherproof housing, you can set it up just where you need it for the most accurate results. WBGT - stay safe in the heat When the mercury soars, heat can take a toll on your body. That’s where the Wet Bulb Globe Temperature (WBGT) comes in. It combines three factors - air temperature, mean radiant temperature and wet-bulb temperature - to calculate heat stress accurately. If the wet-bulb temperautre value stays above 35 °C, your body starts absorbing heat from its surroundings, which can quickly become dangerous. Whether you’re training, gardening or enjoying the outdoors, this digital weather station gives you the exact WBGT reading at all times. The heat stress index also provides a simple warning, so you know when to take a break. Indoor climate check included A healthy climate isn’t just for outside. The base station also measures indoor temperature and humidity via its built-in thermometer and hygrometer. The handy comfort indicator lets you know straight away whether your home or office needs airing. It also tracks air pressure, a reliable sign of changing weather. Detailed weather analysis with alerts This garden weather station doesn’t stop at the basics. It also calculates feels-like temperature, heat index, dew point and wind chill, plus shows you wind strength using the Beaufort scale. The max/min memory highlights local weather trends, and with ProWeatherLive alerts you’ll always be prepared for what’s coming. With its rain gauge and wealth of features, it’s like having your own personal weather assistant. Secure your professional weather overview now - with the BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor! FEATURES BASE STATION 24-hour and 14-day local forecasts with temperature highs, lows and rain probability (via ProWeatherLife server) Large 10-inch (25.4 cm) colour display Wi-Fi connection for publishing data to ProWeatherLive and Weathercloud Internet-based visibility and cloud cover Precise measurements from the 8-in-1 solar-powered outdoor sensor(temperature, humidity, wind speed/direction, rainfall, UV level, light intensity, WBGT) Indoor temperature and humidity with comfort indicator Air pressure display Heat stress index Beaufort scale for wind strength Weather indices: feels-like temperature, heat index, dew point, wind chill Max/min memory Weather alerts via ProWeatherLive Time, date, weekday and moon phase Sunrise/sunset and moonrise/moonset times Backlight with automatic dimmer WSLink app for easy Wi-Fi setup, data calibration and firmware updates Compatible with additional optional sensors (not included, see BRESSER accessories): Optional thermo-hygro sensors for indoor climate Optional soil and pool sensors for the garden Optional water detectors and lightning sensors Optional PM2.5/10, CO2 and HCHO+VOC sensors for air quality Power supply: mains adapter (included), 1x CR2032 backup battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.FEATURES SENSOR Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity and WBGT Powered by large, adjustable solar panel Back-up power with 3x AA batteries (not included) Weatherproof housing Range up to 150 m SCOPE OF DELIVERY Base station with mains adapter 8-in-1 outdoor sensor Instruction manual

Available

€299.00*
BRESSER 7-in-1 LoRa Home Weather Station Terral
Go the extra distance with this LoRa wireless weather station: the BRESSER 7-in-1 LoRa Home Weather Station Terral delivers accurate readings and much more – straight to your display, even from far away. Whether you're at breakfast, grabbing your car keys or airing out the house, you’ll always be up to speed with the local weather. Long-range performance meets modern tech with this LoRa weather station Mounted on the roof, fence or at the bottom of the garden – the 7-in-1 sensor stays reliably connected. With a maximum range of up to 1.5 km in open spaces, the device keeps your base station constantly updated. Modern long-range radio technology ensures stable and dependable data transfer. And with its integrated solar panel, the multi-sensor extends battery life – a win for both you and the environment. Your smart weather station for indoors and out A quick glance at the display: does the weather forecast show sunshine or showers? You'll instantly know whether to pack sunglasses or an umbrella. The Terral professional weather station provides key info including outdoor temperature, humidity, wind speed and direction, rainfall, UV level and light intensity. Indoors, it helps you maintain a comfortable climate with its reliable room temperature and humidity readings. Smart features – online with your wireless weather station Thanks to its Wi-Fi functionality, your weather station connects directly to the digital weather world: your data can be uploaded in moments to platforms like Weathercloud and Wunderground. Local readings become global insights – and you're part of the weather-savvy community. You can access your data anytime, anywhere. Stay in control – with memory and alert functions at home Ready for anything: your weather station keeps track of the highest and lowest values like a logbook. Whether it’s a heatwave on the patio or a cold snap in the greenhouse, the max./min. value memory keeps you informed. For unusual readings – like strong gusts, heavy rain, pressure drops or frost – the station’s configurable alerts notify you as needed. Every measurement can be individually assigned an alarm based on your own thresholds. With the BRESSER 7-in-1 LoRa Home Weather Station Terral, you’ll always have the weather in sight – even across long distances, with full flexibility. FEATURES BASE STATION Wi-Fi connection for publishing local weather data to Wunderground and Weathercloud Indoor temperature (°C/°F) and humidity Displays accurate readings from the 7-in-1 outdoor sensor (outdoor temperature, humidity, wind speed/direction, rainfall, UV level, light intensity) Weather forecast Air pressure Max./min. value memory High/low value alert Time, date, moon phase, alarm clock with 2 alarm times Wall-mountable or freestanding Power supply: mains adapter (included), 3x AAA backup batteries (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES SENSOR LoRa transmission range of up to 1.5 km (in open areas without obstructions) Measures outdoor temperature, humidity, wind speed/direction, rainfall, UV level, light intensity Solar panel to extend battery life Battery powered: 3x AA (not included) SCOPE OF DELIVERY Base station 7-in-1 LoRa sensor Mounting materials Manual

Available

€279.00*
%
BRESSER Wi-Fi ClearView Weather Station with 7-in-1 Sensor
The new BRESSER WIFI ClearView Weather Station with 7-in-1 sensor offers a very comprehensive range of weather data. The multifunctional outdoor sensor can easily be installed with the included mounting accessories! The outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, precipitation, as well as UV level and light intensity via 868 MHz frequency to the base station. The base station shows a large variety of current and historical local weather data on its 8.3'' TRUE BLACK colour display. The latter allows internal storage and evaluation of the measurement data over a period of 24 hours. A very reliable forecast for the upcoming 12h is calculated by your local weather data which will be displayed on the base station. The WIFI function allows users to share their local data via apps such as 'Weather Underground'' or ''Weather Cloud''. In addition, the WIFI function enables Internet Time Synchronization and firmware updates. An alarm can be individually programmed for maximum and minimum values, which triggers both an acoustic and a light alarm signal when the specified value is reached. For outside temperatures from -3°C, a special alarm can also be activated for frost/ice warnings. A poor indoor climate often poses health risks, especially for children and elderly people. The BRESSER WIFI ClearView Weather Station offers a smart feature for this. The indoor climate indicator informs about current indoor climate conditions by means of the room climate indicator. For all ''moon addicts'' the different moon phases are also displayed. An alarm clock with snooze function is also included in the range of functions. This station can also be connected to the mulitlingual portal AWEKAS* (*EU customers only) . Optionally you can transmit your weather data to AWEKAS or call up your weather data worldwide. Transfer data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home home control system. FEATURES8.3'' colour display (19.3 x 9.3 cm) for detailed time and weather information WIFIconnection Internet time synchronization Receives weather data from the 7-in-1 sensor and the wireless thermo-hygro sensor via 868 MHz Publish your local data from your weather station on platforms like 'Weather Underground'', ''Weather Cloud" and "AWEKAS*" (*EU customers only)Display of time, calendar, weekday and moon phase wake-up function Ice/Frost warning Interior temperature (°C / °F) Humidity with comfort display Outdoor temperature (°C / °F) Display of UV level and light intensity Display of gusts and average wind speed Wind direction (exact display based on 16 directions) Rainfall (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Perceived outdoor temperature weather index for dew point, wind chill factor and heat index Min/max value memory (up to 24 hours) Alarm with LED display Weather Calibration 3 different display brightness levels: High / Low / Off 7 languages for the weekday Support of firmware updates Security type: supports WPA3 encryptionSupport a wireless 7-in-1 sensor with 150 m transmission range (included) Supports up to 7 additional wireless sensors (optional) (Art.-No.: 7009999) Integrated WIFI transmission to AWEKAS* (*EU customers only) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.What's IncludedBase station Outdoor sensor 7-in-1 incl. mounting accessories Power supply unit and cable, batteries not included

Available

€199.00* €249.00* (20.08% saved)
%
BRESSER 11-Day 4Cast CV Wi-Fi Weather Station 7-in-1
With the BRESSER 11-Day 4Cast CV WiFi Weather Station 7-in-1 you’ll never find yourself left out in the cold by the weather again. The weather station, with 7-in-1 solar outdoor sensor, supplements the on-site data with plenty of practical information from the ProWeatherLive platform. A special highlight: the extensive weather forecast, with the outlook for the next 11 days and a detailed overview of the next 24 hours. Information on local visibility and cloud cover also helps passionate amateur meteorologists to keep a close eye on the weather. You’ll always be up to date, whenever and wherever you are – choose to view your data, incl. max./min. values, conveniently on the clear display of the weather station, in the ProWeatherLive app or in a web browser. Environmentally-friendly and user-friendly – weather station with solar sensor Quick to install and connect to the base station, the 7-in-1 wireless sensor reliably supplies data measured directly on site, including temperature, humidity, wind speed, wind direction, precipitation amount, UV level and light intensity. Meanwhile, the power of the sun ensures smooth operation via the large solar panel. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries as a back-up during installation and they will take care of the power supply. A comfortable indoor climate with the WiFi weather station Outdoors, the weather station puts in a great performance with anemometer and rain gauge as well as thermometer and hygrometer, UV and light sensors. What about the climate indoors? A thermo-hygro sensor has been integrated into the base station so that you can always keep an eye on the indoor temperature and humidity. The trend display, which can be called up directly on the display, is perfect for preventing excessively dry air or mould. Trends you will be able to see include development of the room climate, so that you can respond by introducing fresh air or by humidifying if you need to. In addition, with ProWeatherLife, you can receive notifications when the indoor temperature and humidity change, as well as important weather parameters. Optional extensions for your WiFi weather station Want to adapt your weather station to your needs? No problem! It comes with a range of optional extensions through the following additional sensors (not included): Optional thermo-hygro sensors for indoor climate Optional soil and pool sensors for the garden Optional water detector and lightning sensors Optional PM2.5/10, CO2 and HCHO+VOC sensors for air quality For the perfect extensions, browse our BRESSER accessories to see which additional sensors are compatible (not included). Stay up to date on your local weather and indoor climate easily, whenever and wherever, with the BRESSER 11-Day 4Cast CV WiFi Weather Station 7-in-1. BASE STATION FEATURES Graphic weather forecast for the next 11 days (today and next 10 days)/for 24 hours (now and next 23 hours) from the ProWeatherLife server 11-day forecast for maximum and minimum temperature, as well as average temperature and chance of precipitation from the ProWeatherLife server Local visibility and cloud cover via the ProWeatherLive server WiFi connection for publishing local weather data on ProWeatherLive and up to 2 other weather platforms (e.g. AWEKAS) Indoor temperature (°C/°F) and humidity with trend Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Trend graph for air pressure, precipitation, temperature (indoor/outdoor) or humidity (indoor/outdoor) on the display Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Wind gusts and average wind speed, Beaufort scale (wind speed scale) Sunburn time display Air pressure Set weather notifications via the ProWeatherLive server Maximum/minimum value memory Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm clock with frost alarm WSLink app for easy connection to WiFi and weather platform, weather data calibration and for firmware updates 7 languages for day of the week (EN, DE, FR, ES, IT, NL, RU) Supports additional optional sensors Power supply: Mains plug (included), CR2032 back-up battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES OF 7-IN-1 OUTDOOR SENSOR Measurement of temperature, humidity, wind speed, wind direction, precipitation quantity, UV level and light intensity Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included)Range: 150 mSize: 390 x 174 x 465 mm SCOPE OF DELIVERY Base station Solar-powered outdoor sensor Power adapter Instruction manual

Available

€289.00* €299.00* (3.34% saved)