Action Cam LED Torch
- Action Cam LED light for convincing brightness
- 3 LED's, 30m waterproof, 900mAh battery capacity
- 3 light modes: High/Low/SOS, color temperature 5600K
- Dimensions: 74 x 47 x 65 mm; Weight: 95 g
- Incl: Lamp, USB cable, holder, rechargeable battery
- Suitable for night shots, for diving, for badly exposed rooms
- LED charge indicator
- Brightness: 360 lm
- Colour temperature: 5600K
€14.99*
% €34.95* (57.11% saved)Available, delivery time: 1-3 days
True art of living consists in seeing the wonderful in the everyday. (Pearl S. Buck)
Table of Contents
1. The History2. The Features
2.1 The Key Figures
2.2 The Magnification
2.3 The Objective Diameter
2.4 The Exit Pupil
2.5 The Twilight Factor
2.6 The Brightness
2.7 The Interpupillary Distance
2.8 The Eye Relief (Focal Point of the Eyepiece)
2.9 The Field of View
2.10 The Focus
2.11 The Rubber Armor
3. The Glass
3.1 The Coating
3.2 The Glass Material
3.3 Porro or Roof Prisms
3.4 Achromats
4. Types of Binoculars
4.1 Binocom or Nautic
4.2 Night Glass or Night Vision Device
4.3 Residual Light Amplifiers
You might be interested in this!
Entdecken Sie unsere Ratgeber!
Using the supplied mounting and the fixing screw the LED light can be attached to almost all Action Cams.
The 3 integrated LED's provide a convincing brightness, so that you can also take photos and videos at night without any problems. The illumination is adjustable in three different light levels (High/ Low/ SOS) .
The BRESSER Action Cam LED light is up to 30m waterproof, which is why diving with the LED light for underwater photography is no problem.
The supplied and replaceable battery can be charged with the included USB charging cable . The battery capacity is 900 mAh.
FEATURES
- 3 bright LED's
- brightness: 360 lm
- Colour temperature: 5600K
- 3 light levels: High/ Low and SOS
- Suitable for night shots, for diving, for badly lit rooms
- Housing waterproof: 30 m
- Battery capacity: 900 mAh
- LED charge indicator
- LED Lamp
- USB charging cable
- Holder
- knurled screw
- Battery
- Manual
Batteries included: | 0 |
---|---|
Colour: | black |
Extended warranty (years): | 5 |
Material: | Plastic |
Net Weight total (incl. accessories) (g): | 148 |
Net weight (without access.) (g): | 95 |
Total height (mm): | 65 |
Total length (mm): | 74 |
Total width (mm): | 47 |
Waterproof 8): | 1 |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- Suffocation risk Keep packaging materials such as plastic bags and rubber bands out of the reach of children, as these materials pose a suffocation hazard. This product contains small parts that could be swallowed by children.
- Leaking battery acid can cause chemical burns. Avoid contact with battery acid on skin, eyes, and mucous membranes. If contact occurs, immediately rinse the affected area thoroughly with water and seek medical attention.
- Electrical shock - Never bend, kink, or pull on the power and connection cables, extensions, and adapters. Protect the cables from sharp edges and heat. Before operation, check the device, cables, and connections for damage. Never use a damaged device or a device with damaged power cables. Damaged parts must be immediately replaced by an authorized service center.
- NOTICE! Do not disassemble the device! In case of a defect, please contact the service center in your country. Do not immerse the device in water. Do not expose the device to excessive force, shocks, dust, extreme temperatures, or high humidity, as this may cause malfunctions, shorter electronic lifespan, damaged batteries, and warped parts. If the product is functioning, a slight click will occur every few seconds. This is a normal phenomenon as the lens captures the image.
- Do not expose the device to high temperatures. Do not short-circuit the device or throw it into fire. Excessive heat or improper handling can cause a short circuit, fire, or explosion.
- Do not interrupt an ongoing data connection to a computer before all data has been transferred. This could lead to data loss, for which the manufacturer is not liable.
- Disposal: Dispose of packaging materials properly according to their type, such as paper or cardboard. Contact your local waste disposal service or environmental authority for information on proper disposal. Do not dispose of electronic devices in household waste! The integrated battery should only be removed for disposal. Opening the housing may damage the device. Fully discharge the battery before disposal. Remove all screws from the housing and open the housing. Remove the battery connections and take the battery out. Cover the exposed contacts with tape and pack the battery in a way that it cannot shift in the packaging.