Depending on the magnification factor, the magnification range of the microscope can be varied
- Magnification: 2x
- Scope of delivery: Additional lens
€127.90*
Unfortunately, no longer available
Product number:
5941483
EAN:
4007922151304
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER Additional Lens 2.0 x"
With this objectives it is possible to extend the magnification range of the microscope. They are attached in front of the pair of objectives via the M48 thread. Please note that the additional objective will alter the working distance, i.e. the distance between the microscope head and the object that is in focus.
Additional objectives with magnifications < 1.0 will raise the working distance. This might be especially helpful when manipulating samples by hand or use of tools is necessary (soldering, engraving etc.). Objectives with magnifications > 1.0 will lower the working distance.
Additional lens is suitable for:
Additional objectives with magnifications < 1.0 will raise the working distance. This might be especially helpful when manipulating samples by hand or use of tools is necessary (soldering, engraving etc.). Objectives with magnifications > 1.0 will lower the working distance.
Additional lens is suitable for:
- Bresser Stereo Microscopes Advance ICD (5804000)
- Bresser Science ETD-101 (5806100)
- 1x Additional Objective 2.0x
| Batteries required: | No |
|---|---|
| Colour: | black |
| Extended warranty (years): | 5 |
| Material: | Aluminium |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- In case of defects, contact your retailer or the manufacturer.
- Small parts can be swallowed. Keep small parts out of reach of children, allow children to work with the device only under supervision.
- Keep packaging materials away from children. There is a risk of suffocation.
Skip product gallery
Customers also viewed
%
BRESSER additional objective 0.75x
€35.00*
€94.90*
(63.12% saved)
Additional objective for Bresser Stereo Microscopes Advance ICD 5804000 and Science ETD-101 5806100With this objectives it is possible to extend the magnification range of the microscope. They are attached in front of the pair of objectives via the M48 thread. Please note that the additional objective will alter the working distance, i.e. the distance between the microscope head and the object that is in focus.Additional objectives with magnifications < 1.0 will raise the working distance. This might be especially helpful when manipulating samples by hand or use of tools is necessary (soldering, engraving etc.). Objectives with magnifications > 1.0 will lower the working distance.Art.Nr. 5941480 0.5 x Magnification Art.Nr. 5941481 0.75 x Magnification Art.Nr. 5941482 1.5 x Magnification Art.Nr. 5941483 2.0 x Magnification
Available
