BRESSER additional objective 0.5x

The zoom stereo microscope BRESSER Advance ICD is suitable for a wide variety of objects. Because of the Greenough design with two tilted objectives, you can view the sample in 3D. The three-dimensional view is also very helpful when working under the microscope, e.g. when soldering, dissecting or preparing a sample.The precise zoom enables you to view your sample in a wide range of magnifications from 1x to 4x (zoom ratio 4.0). When zooming, only slight refocussing is necessary. To do this, the Advance ICD microscope is equipped with a very precise, coaxial coarse and fine focus. The fine focus is especially helpful when using high magnifications or for imaging. When doing focus stacking with our MikroCam cameras (optional) the fine focus is also a big help.The interpupillary distance of the eyepiece pair is adjustable. Both eyepiece holders are equipped with diopter adjustment, which allows users with bad eyesight to compensate up to 8 dpt. difference between left and right eye. The 10x wide field eyepieces have field number (FN) 22 and are equipped with soft rubber eyecups. The microscope head can be moved on the long rod of the stand, which allows you to observe big samples up to a size of 22 cm.The angle of the bright LED reflected light illumination can be adjusted as necessary. The extra bright and even LED transmitted light provides a flat background when viewing transparent samples. The switch allows you to select reflected light, transmitted light or a combination of both to match your requirements. Brightness is adjustable with the dimmer. The bright light does not heat up, which allows you to observe also living specimens over a longer period of time. The long lasting LED is powered by a 5V AC adapter (EU/UK). The power cable comes with a USB plug.Fully equipped, the Advance ICD covers an exceptionally wide range of magnifications and is therefore suitable for a variety of tasks. Besides the included 2x lens there is also a selection of other auxiliary objectives available. With these, you are able to adjust magnification, working distance and depth of focus according to your needs.Magnifications in basic setting (no optional accessories):10x eyepieces: 10x – 40x10x eyepieces plus 2x auxiliary lens: 20x – 80x20x eyepieces: 20x – 80x20x eyepieces plus 2x auxiliary lens: 80x – 160x(other magnifications are possible when using other auxiliary lenses and/or eyepieces)The third tube is designed to permanently attach a camera. The image of the left eyepiece is diverted to the camera port with a lever/switch. We supply a selection of camera adapters for DSLR, mirrorless cameras and c-mount microscope cameras. This enables you to attach virtually any camera body as long as you have a model with interchangeable lens.APPLICATION RANGEQuality control in industryMaterials scienceLaboratoryBotany, gardening, farmingHydrology, aquaculture, fishkeepingInsects, Entomology, pest controlPlant physiology, raw food materials, medicinal herbsSchools, teachingFEATURESTrinocular head with 2 eyepieces and camera port with switchCompatible with BRESSER MikroCam cameras and others1x-4x stereo-zoom head2x auxiliary lensDiopter adjustment on both eyepiece holdersAdjustable interpupillary distance (52 – 72 mm)Bright LED light (reflected / transmitted)2 different object plates for best contrastView samples of up to 22 cm heightAC adapter Euro/UK (5V / 1000 mA) with USBHeavy build with metal standIncludes 2 pairs of widefield eyepiecesSCOPE OF DELIVERYMicroscope2 pairs of eyepieces (WF 10x / WF 20x)2x auxiliar lens (1 pcs)1 pair of rubber eyecupsObject plate 94 mm (black / white)Glass object plate 94 mm (matte)AC adapter Euro/UK (5V / 1000 mA)Dust coverPrinted manual

Connect your BRESSER Microscope or Telescope with a Nikon SLR camera and take images or videos of your observed object!The BRESSER T-Mount is the connecting piece between the camera adapter and SLR camera. To find out what T2-ring you need, look into the instruction manual of your camera.FEATURESConnecting piece between the camera adapter and Nikon SLR cameraHigh-quality and precise workmanship made of metalA corresponding camera adapter is neededSCOPE OF DELIVERYT2 Ring Nikon

Slides and cover glasses are an indispensable accessory which has also impact on the image quality. For most biological microscopes, the cover glass thickness is an important optical parameter, which is therefore included in the optical design and, if so, printed on the sleeve of every objective. You can usually see the number 0.17 which is the thickness in millimeters. For demanding applications in the laboratory, or for microphotography, using cover glasses with the desired thickness and high quality is necessary.The cover glasses included in the set are made of Boro 3.3 glass and are standardized to a thickness of 0.16-0.19mm. So they match the desired 0.17mm really good and give the best possible image quality. These Boro 3.3 cover glasses are pure white, without streaks and are pre-cleaned and ready to use. They are also especially suitable for fluorescence microscopy.The slides are made of soda lime glass, and have ground edges for safe handling. They have a matte field for writing on both sides (top and bottom). Slides and cover glasses are packed separately and in a vacuum sealed bag, containing moisture absorbent. They can be stored for a long time without loss of quality from hydrolysis and are easy to take out.

The BRESSER SLR camera adapter 2x T2 functions as an adapter between a microscope and a reflex or system camera. A camera-specific T2 ring is required for operation. This adapter is suitable for common microscopes with a 23.2 mm connection. Depending on the setup, you can achieve a parfocal image with a trinocular microscope. As with other adapters, the visible field of view remains smaller than the ocular field of view. FEATURES 23.2 mm plug connection T2 thread Integrated lens with 2x magnification SCOPE OF DELIVERY Camera adapter

The BRESSER Mechanical Stage for Stereo Microscopes allows precise object movement in both the X and Y directions, making accurate positioning easy. Each axis features a vernier scale for added precision. Thanks to its adjustable movement, the mechanical stage can also be used to create mosaic images when combined with a BRESSER MikroCam (II, SP, SF). It is designed to replace the standard stage plate on a microscope and is compatible with devices that have a 95 mm stage plate. The maximum movement range is 165 x 65 mm, depending on the microscope’s size. With a height of 26 mm above the microscope stage, the mechanical stage slightly reduces the maximum object height. Compatible with the following devices: BRESSER Erudit ICD (5803600) BRESSER Advance ICD (5804000) BRESSER DST-0745 (5808100) FEATURES Suitable for microscopes with a 95 mm object plate Maximum movement range: 165 x 65 mm (depending on the microscope size) Coaxial adjustment knobs for smooth operation Precision measuring bar with vernier scales on both axes Compatible with both reflected and transmitted light microscopy SCOPE OF DELIVERY Mechanical stage with glass plate and two object clamps

The BRESSER 0.5x reducing lens is designed to enlarge the image from a microscope camera. It increases the light intensity and therefore reduces the exposure time. In the case of trinocular microscopes, the adapter usually enables the focus to be matched to the focus of the eyepiece.It is compatible with focusers with a 23.2 mm receptacle. This adapter is specially designed for cameras with sensor sizes of 1/2'' or 1/3''. The connection is made via a 1'' C-mount thread. FEATURES:C-mount threadMicroscope connector: 23.2 mmMagnification factor: 0.5x DELIVERY CONTENT:0.5x reduction lens (fixed)