BRESSER additional Objective 0.7x (ETD-201)

Halves the magnification factor of the ETD-201
Increases the working distance
Larger field of view for using a microscope camera
Screws into the lens housing under the lens
Working distance: 137 mm

€64.90*

Prices include VAT. Shipping costs not included

Available, delivery time: 2-4 days

Product number: 5941492

EAN: 4007922052021

WEEE-Reg.-Nr.: DE 34323861

Product information "BRESSER additional Objective 0.7x (ETD-201)"

In some applications, it is desirable to decrease the magnification factor. With this 0.7x lens, you can use the Science ETD-201 at magnifications of 5.6 to 35x.. The working distance is increased slightly. This is particularly useful if you need to work under the microscope. A larger and brighter field of view is also useful when using a microscope camera. The working distance is 137 mm.

This additional lens is compatible with the following BRESSER microscopes:

Science ETD 201 (5806200)

DELIVERY CONTENT

1x additional lens (0.7x magnification)

Batteries required:	No
Colour:	silver
Extended warranty (years):	5
Material:	Metal

Product and safety instructions

Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact:
www.bresser.de

Warning notes

In case of defects, contact your retailer or the manufacturer.
Small parts can be swallowed. Keep small parts out of reach of children, allow children to work with the device only under supervision.
Keep packaging materials away from children. There is a risk of suffocation.

Customers also viewed

BRESSER Additional Lens 2.0 x

With this objectives it is possible to extend the magnification range of the microscope. They are attached in front of the pair of objectives via the M48 thread. Please note that the additional objective will alter the working distance, i.e. the distance between the microscope head and the object that is in focus.Additional objectives with magnifications < 1.0 will raise the working distance. This might be especially helpful when manipulating samples by hand or use of tools is necessary (soldering, engraving etc.). Objectives with magnifications > 1.0 will lower the working distance.Additional lens is suitable for:Bresser Stereo Microscopes Advance ICD (5804000)Bresser Science ETD-101 (5806100)SCOPE OF DELIVERY1x Additional Objective 2.0x

Available

€125.00*

BRESSER additional objective 0.5x

Additional objective for BRESSER Stereo Microscopes Advance ICD 5804000 and Science ETD-101 5806100With this objectives it is possible to extend the magnification range of the microscope. They are attached in front of the pair of objectives via the M48 thread. Please note that the additional objective will alter the working distance, i.e. the distance between the microscope head and the object that is in focus.Additional objectives with magnifications < 1.0 will raise the working distance. This might be especially helpful when manipulating samples by hand or use of tools is necessary (soldering, engraving etc.). Objectives with magnifications > 1.0 will lower the working distance.Art.Nr. 5941480 0.5 x Magnification Art.Nr. 5941481 0.75 x Magnification Art.Nr. 5941482 1.5 x Magnification Art.Nr. 5941483 2.0 x Magnification

Available

€109.90*

BRESSER additional objective 0.75x

Additional objective for Bresser Stereo Microscopes Advance ICD 5804000 and Science ETD-101 5806100With this objectives it is possible to extend the magnification range of the microscope. They are attached in front of the pair of objectives via the M48 thread. Please note that the additional objective will alter the working distance, i.e. the distance between the microscope head and the object that is in focus.Additional objectives with magnifications < 1.0 will raise the working distance. This might be especially helpful when manipulating samples by hand or use of tools is necessary (soldering, engraving etc.). Objectives with magnifications > 1.0 will lower the working distance.Art.Nr. 5941480 0.5 x Magnification Art.Nr. 5941481 0.75 x Magnification Art.Nr. 5941482 1.5 x Magnification Art.Nr. 5941483 2.0 x Magnification

Available

€94.90*

BRESSER additional objective 1.5x

Available

€104.90*

BRESSER additional Objective 2x (ETD-201)

In some applications, it is desirable to increase the magnification by an additional 50x. With this 2x lens, you can use the Science ETD-201 at magnifications of 16 to 100x.. The working distance is reduced slightly. However, the depth of field is higher at the resulting magnification than when the magnification is increased by simply using another pair of eyepieces. A conversion lens is therefore the accessory of choice for magnifications greater than 50x. This additional lens is compatible with the following BRESSER microscopes: Science ETD 201 (5806200) DELIVERY CONTENT 1x additional lens (2x magnification)

Available

€69.90*

BRESSER Microscope Photo Adapter 23mm

Photo adapters are used to mount a camera on a microscope. SLR cameras work without their own objective. The magnification is made only by the microscope objectives. A specific T2-ring is necessary!With the BRESSER photo adapter 23 mm reflex cameras can be connected to microscopes with a eyepiece tube diameter of 23 mm. The camera is connected to the photo adapter via an optionally available T2 ring. The photo adapter is put into the eyepiece tube of the microscope instead of the eyepiece. Depending on type of construction and sensor or film size shadows may occur at the margins of the image.This photo adapter is compatible with the following BRESSER microscopes:Researcher Bino (5722100)Researcher Trinocular (5723100)Analyth Bino (5730000)BioScience Bino (5750500)Biolux ICD (5802000)Advance ICD (5804000)

Available

€27.00*

BRESSER DIN Objective 60x

The BRESSER DIN-Objective 60x is an achromatic objective with standard diameter to enhance the magnification variety of your BRESSER Erudit DLX or Researcher Microscope. The objective has a parfocal length of 45mm. It is not recommended for the models Erudit Basic Mono/Bino, as these have a shorter parfocal length.

Available

€49.90*