Skip to main content Skip to search Skip to main navigation

BRESSER Additional / Spare Base Station for Weather Station 7002520CM3000

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
  • If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
  • The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
  • CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
  • Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
  • The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery

Spare Parts

Stand for the weather station, item no. 9080600, 7002520CM3000, 7002580
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:16421164237002520CM30007002580790252079025809080600

Available

€4.99*
Power supply 4.5V-0.3A (EU) straight
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:164237002520CM300079025207002520000000

Available

€14.99*
Skip product gallery

Customers also viewed

BRESSER Additional / Replacement Base Station for the WSX3001 Professional Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Would you like to view your weather data in an additional room? Are you looking for a gift to enable your neighbours to monitor your local weather? Or maybe the base station from your BRESSER Professional Wi-Fi Weather Station didn’t survive your recent move or your child’s latest tantrum? Whether you’re looking for an extension or a replacement, this base station will allow you to access all of your measurements on the large 20 cm screen. In addition to displaying the data from your 7-in-1 sensor (not included), it can also show the readings from up to 7 compatible additional sensors (not included). Share your weather data worldwide The base station can also be connected to online platforms such as Wundergound or Weathercloud so that you can share and access your weather data online. And with the German-language portal AWEKAS, you can integrate your measurements into your smart home system (configuration instructions: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/). Additional base station – monitor the indoor climate in another room If your existing base station is in the living room, you can place a second base station in the kitchen or your child’s bedroom to view your local weather data in an additional room. The base station features a built-in thermo-hygro sensor, which measures the ambient temperature and humidity and displays a smiley symbol to indicate the quality of the indoor climate. You can then take effective measures to prevent the risk of mould or dry air. The additional base station is also ideal as a bedside clock. It features a built-in backlight that can be dimmed or switched off completely to ensure you get a good night’s sleep. And so that you wake up on time, it also has a practical alarm with a snooze function, as well as a frost warning function that triggers that alarm 30 minutes earlier when the outdoor temperature drops below -3°C – plenty of time to ensure that you get to work or school safely. Access all the practical functions of your BRESSER Professional Wi-Fi weather station with this additional/replacement base station. FEATURES WiFi connection with internet time synchronisation and support for firmware updates Publish your weather data on Wunderground or Weathercloud Indoor temperature (°C/ °F) and humidity (%) Displays the outdoor temperature (°C/ °F) and humidity (%) Light intensity (Klux / Kfc / W/m²) Displays the current UV index, exposure level and recommended protection Displays the sunburn time (mins) based on the current UV level Wind direction and speed (m/s; km/h; Knoten; mph) Beaufort index (scale for measuring wind speed) Air pressure with 24-hour history (hPa/inHg/mmHg) Rainfall with history (day/week/month) Graphical weather forecast for next 12-24 hours Weather index (‘feels like’ function, dew point, heat index, wind chill factor) Trend indicator shows the weather trends for the next few minutes Visual comfort level indicator for room temperature and humidity Phases of the moon Sunrise and sunset times Alarm with snooze function (5 minutes) and ice/frost warning Weekday alarm Min./max. memory (up to 24 hours) LED backlight, amber-coloured Wall bracket and table stand Supports a 7-in-1 sensor and up to 7 indoor sensors (sensors are not included) Dimensions: 215 x 172 x 29 mm and weight: 639 g Power supply: Power adapter and 3x AAA batteries as backup batteries (batteries are not included) Integrated Wi-Fi transmission to AWEKAS Security protocol: supports WPA3 encryption for firmware version 1.09 and above DELIVERY CONTENT Base station with stand Power adapter Instruction manual

Available

€99.00*
%
BRESSER Additional / Spare Base Station for Weather Station 7002550CM3000
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Base station for 5-in-1 multisensor and other weather stations Indoor temperature (°C/°F) and humidity Graphical weather trend display (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min./max. memory (up to 24 hours) SCOPE OF DELIVERY Base station Stand Power adapter

Available

€49.00* €119.00* (58.82% saved)
%
BRESSER Additional / Spare Base Station for Weather Station 7002525
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Receives weather data from the 5-in-1 external sensor Large colour display and elegant design Graphical weather trend (12 hours) Measures the indoor temperature (°C/°F), humidity and air pressure Displays the outdoor temperature (°C/ °F) and humidity Displays the wind speed and wind direction Beaufort scale display (scale for measuring wind speed) Precipitation display with history (day/week/month) Historical bar graph display for precipitation (last 5 days) and change in air pressure (last 1, 3, 6,12 and 24 hours) Indoor climate indicator Maximum and minimum value alarm Min./max. memory (up to 24 hours) Weather index display: Feels like (perceived temperature), dew point, wind chill factor, heat index and Beaufort index Radio-controlled time and date settings(PLEASE SET HOUR OFFSET TO -1 IN THE TIME SETTING MENU IF IN THE UK, IRELAND OR PORTUGAL TO RECEIVE THE CORRECT TIME FOR THESE AREAS) Moon phase display Alarm function with snooze button and ice warning function 5 languages for day of the week display (EN, DE, FR, ES, IT) Ambient light sensor for automatic dimming of the LED backlight Power supply: Power adapter, CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station with standPower adapterInstruction manual

Available

€54.90* €69.00* (20.43% saved)
%
BRESSER Additional / Replacement Base Station for the 7003220 6-Day 4CAST PRO SF Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 6-day weather forecast (today and 5 following days) Large 25.4 cm (10-inch) colour display with stylish design Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€75.00* €175.00* (57.14% saved)
%
BRESSER Additional / Spare Base Station for Weather Station 7002510 from LOT no. 1181632
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 The base station from the 5-in-1 weather station – now also individually – for an overview of measured values in multiple rooms. A base station in the living room and one in the bedroom, giving you an ideal overview whichever room you’re in. The clearly structured display on the base station also displays a range of history data. It enables internal storage and evaluation of the measured data over a 24-hour period. Using the measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, which is indicated on the display by six graphical symbols. There is a programmable alarm function for maximum and minimum values, which can emit an acoustic alarm and light signal if either value is reached. A special frost/ice warning alarm can also be configured for outdoor temperatures from -3 °C. A poor indoor climate can pose a particular health risk for children and the elderly. The BRESSER 5-in-1 weather station offers a smart feature to help tackle this. The indoor climate indicator uses symbols to visualise the current status of the indoor climate. In addition, the BRESSER 5-in-1 weather station also offers radio-controlled time and date setting (DCF time signal). The current central European time (CET) and date with day will be displayed within a few minutes of the device being switched on. For the moonstruck, the display also indicates the various phases of the moon. A wake function with snooze function is also included. FEATURES Base station for 5-in-1 multisensor and other weather stations Indoor temperature (°C/°F) and humidity Graphical weather trend display (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min/max memory (up to 24 hours) LED backlight, amber-coloured with removable stand and suspension device Requires 3x AA batteries WHAT’S INCLUDED Base station Stand

Currently unavailable

€63.00* €69.00* (8.7% saved)
%
BRESSER Additional / Spare Base Station for Weather Station 7002580
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Base station for 5-in-1 multi-sensor and other weather stations Indoor temperature (°C/°F) and humidity Displays the graphical weather trend (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min./max. memory (up to 24 hours) SCOPE OF DELIVERY Base station Stand Power adapter

Currently unavailable

€119.00* €129.00* (7.75% saved)
%
BRESSER Additional / Spare Base Station for Weather Station 7002586
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002582700258670026207003100CM30007003100GYE0007003100HZI0007003100QT500070033007003600CM30007003600GYE0007003600QT5000908060070031000000007003600000000 Get clarity on the current wind and weather: You have purchased the BRESSER WiFi ClearView Weather Stationand now know your local wind speed, wind direction, humidity, temperature, precipitation values, as well as UV level and light intensity. But where should you put the base station? In the living room, your whole family will benefit from being able to glance quickly at the clear 21 cm TRUE BLACK colour display. But wouldn’t it also be great in the bedroom, so that as soon as you’ve switched off the alarm you’ll know whether blue sky and sunshine await? With this additional BRESSER base station, you don’t need to decide on just one room. Simply connect to your 7-in-1 external sensor and you have immediate access to your measured values in another room. You can count on the usual functions whenever you need them, including reliable local weather trend forecasts for the next 12 hours, displayed as graphics, so know when to organize a spontaneous BBQ. In the winter months, the frost alarm will alert you when the external temperature falls below -3 °C: Caution, risk of black ice! You can also see the date, day of the week, timeand moon phases so you have an idea of the ‘signs of the times’. Plus, for a more long-term view, the memory function stores historical measured data from the past 24 hours. Time to give your BRESSER WiFi ClearView Weather Station a breath of fresh air Are there early signs of mould formation in your bathroom? Is the air in your children’s bedroom too dry because of the central heating? The additional BRESSER base station allows you to respond to unusual situations like these with utmost flexibility, as two stations mean two separate measured results for indoor temperature, humidity and air pressure. Position the device in a critical location and the integrated sensor will measure the current room temperature, humidity and air pressure at that location. A graphical room climate indicator will alert you when the air is optimal, too dry or too damp. In addition, you can also set an independent maximum/minimum value alarm with audible and light signal on the additional station itself. On the road often? In addition to the base station at home, you can use the WiFi function to access your measured data through weather portals such as AWEKAS any time, anywhere. Or, use AWEKAS to transmit your data to your Smart Home controller. Risk more than just a glance— this BRESSER base station displays reliable weather data from your 7-in-1 external sensor at an additional location. FEATURES 8.3” colour display (19.3 x 9.3 cm) for detailed time and weather information WiFi connection with internet time synchronisation Receives weather data from the 7-in-1 external sensor and from the optional wireless thermo-hygro sensors on 868 MHz Suitable for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud Integrated sensor for indoor temperature (°C/°F), humidity and air pressure External temperature (°C/°F), humidity, wind direction, wind speed, UV level and light intensity Precise wind direction display (16 directions) Graphical weather trend display (sunny, partly cloudy, overcast, rain, storm, snow) Beaufort index display (scale for measuring wind speed) Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation) Room climate indicator Weather index display for dewpoint, windchill factor and heat index Time, calendar, day of the week and moon phase display Alarm function with snooze button Ice/frost alarm Min./max. memory (up to 24 hours) Alarm with LED indicator 3 different display brightness levels High/Low/Off 7 languages for days of the week Firmware updates supported Supports up to 7 additional wireless sensors (optional) (item no. 7009999) Integrated WiFi transmission to AWEKAS SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€169.00* €179.00* (5.59% saved)