Skip to main content Skip to search Skip to main navigation

BRESSER Additional / Spare Base Station for Weather Station 7002525

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
  • If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
  • The AC/DC adapter serves as a disconnecting device. - The device’s AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
  • CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
  • Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
  • The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery

Compatible Sensors

BRESSER 5-in-1 Outdoor Sensor
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. You can check the LOT number on your unit as well as on the packaging. Compatible with the following devices: 15200 15201 15659 16410 7002510, LOT number 1156743 or higher 7002511, LOT number 1156743 or higher 7002512, LOT number 1156743 or higher 7002513, LOT number 1156743 or higher 7002525 7002550CM3000 7002550GYE000 7002550MGU000 7002550QT5000 7002571 7002580 7002581 7002585 7002590 7002610 7002620 7800004 7800006 7800008 7800011 7902510 7902511 7902512 7902513 7902525 7902550 7902551 7902552 7902580 7902581 7902585 9080500 9602510 7002550000000 WSX1001CM3LC1 WSX1001CM3LC2 WSX1001000000 PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. You can check the LOT number on your unit as well as on the packaging. FEATURES Replacement wireless sensor, transmits data to the WiFi colour weather centre Measures wind speed, wind direction, humidity, external temperature and precipitation Transmission frequency: 868 MHz Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Multifunctional external sensor Mounting materials No base station included Instruction manual

Available

€99.00*
Skip product gallery

Spare Parts

Power supply Micro-USB 5V-0.6A (EU)
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:700252579025259080500

Available

€14.99*
Stand for the weather station base unit, item no. 7002525 (black)
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:70025257902525

Available

€4.99*
Skip product gallery

Customers also bought

BRESSER Weather Station 5-in-1 Beaufort
The BRESSER Beaufort 5-in-1 Weather Station has everything you need to stay on top of the weather. The weather station also has a large colour display with an intuitive, easy-to-read layout. Thanks to the elegant design, the device blends in perfectly in any home - from a country house to minimalist decor. The outdoor temperature and humidity readings from the 5-in-1 outdoor sensor are supplemented by the integrated thermal/hygro sensor on the base station, which provides precise data on indoor temperature, humidity and air pressure. And so that you always know which way the wind is blowing from - as well as how much it's rained - the weather station also features an anemometer and a rain gauge. Practical features and useful weather data Featuring an outdoor sensor, the weather station offers numerous features to keep you meteorologically informed throughout the day. For example, the graphic weather forecast will show you what kind of weather you can expect over the next 12 hours. Meanwhile, the perceived ('feels like') temperature factors in the impact of wind and humidity on the outdoor temperature, and helps you to choose the right clothes. In addition to the dew point, wind chill and heat index, the weather station also shows you the wind speed using the Beaufort index so that you always know how strong the wind is blowing. However, it's not just the outdoor conditions that are important. The weather station also features a graphic indoor climate indicator, which uses a smiley to show you whether the indoor temperature and humidity are at an optimal level. If your struggle with mildew or dry air, you can set a maximum and minimum value alarm that informs you when the preset limits have been reached. This alarm can also be set for the other measured values. If you're a keen meteorologist or gardener and want to follow recent trends in weather, the weather station also features a historical bar chart for precipitation and air pressure, as well as a min/max value memory. Radio-controlled clock with built-in alarm In addition to extensive meteorological data, the weather station also features a radio-controlled clock that sets the time automatically. After it has been connected to the power supply, the base station automatically searches for the corresponding radio signal. A few minutes later, the time, date and day of the week will appear on the display, together with the current moon phase. (PLEASE SET HOUR OFFSET TO -1 IN THE TIME SETTING MENU IF IN THE UK, IRELAND OR PORTUGAL TO RECEIVE THE CORRECT TIME FOR THESE AREAS). The weather station is ideal for bedrooms: the built-in light sensor automatically adjusts the display brightness to the surroundings so that your sleep is not disturbed. There is also a built-in alarm clock with a snooze function. During the winter, the ice/forst alarm activates the alarm 30 minutes earlier when the temperature is below -3 °C. View the time and weather on a colour display with the BRESSER Beaufort 5-in-1 Weather Station. BASE STATION FEATURES Receives weather data from the 5-in-1 external sensor Large colour display and elegant design Graphical weather trend (12 hours) Measures the indoor temperature (°C/°F), humidity and air pressure Displays the outdoor temperature (°C/ °F) and humidity Displays the wind speed and wind direction Beaufort scale display (scale for measuring wind speed) Precipitation display with history (day/week/month) Historical bar graph display for precipitation (last 5 days) and change in air pressure (last 1, 3, 6,12 and 24 hours) Indoor climate indicator Maximum and minimum value alarm Min./max. memory (up to 24 hours) Weather index display: Feels like (perceived temperature), dew point, wind chill factor, heat index Radio-controlled time and date settings Moon phase display Alarm function with snooze button and ice warning function 5 languages for day of the week display (EN, DE, FR, ES, IT) Ambient light sensor for automatic dimming of the LED backlight Power supply: Power adapter, CR2032 back-up battery (not included) Dimensions: 182 x 118 x 20 mm / Weight: 225 g OUTDOOR SENSOR FEATURES Measures the temperature, humidity, wind speed, wind direction and precipitation Transmission range: up to 150 m Battery operated: 3x AA (not included) Dimensions: 343.5 x 393.5 x 136 mm DELIVERY CONTENT Base station Multi-sensor with mounting materials Power adapter Instruction manual

Available

€159.00*
Skip product gallery

Customers also viewed

BRESSER 5-in-1 Outdoor Sensor
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. You can check the LOT number on your unit as well as on the packaging. Compatible with the following devices: 15200 15201 15659 16410 7002510, LOT number 1156743 or higher 7002511, LOT number 1156743 or higher 7002512, LOT number 1156743 or higher 7002513, LOT number 1156743 or higher 7002525 7002550CM3000 7002550GYE000 7002550MGU000 7002550QT5000 7002571 7002580 7002581 7002585 7002590 7002610 7002620 7800004 7800006 7800008 7800011 7902510 7902511 7902512 7902513 7902525 7902550 7902551 7902552 7902580 7902581 7902585 9080500 9602510 7002550000000 WSX1001CM3LC1 WSX1001CM3LC2 WSX1001000000 PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. You can check the LOT number on your unit as well as on the packaging. FEATURES Replacement wireless sensor, transmits data to the WiFi colour weather centre Measures wind speed, wind direction, humidity, external temperature and precipitation Transmission frequency: 868 MHz Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Multifunctional external sensor Mounting materials No base station included Instruction manual

Available

€99.00*
BRESSER Additional / Spare Base Station for Weather Station 7002580
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 15200152017002525700257170025807002581700258570025907006300WSH4102Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Base station for 5-in-1 multi-sensor and other weather stations Indoor temperature (°C/°F) and humidity Displays the graphical weather trend (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min./max. memory (up to 24 hours) SCOPE OF DELIVERY Base station Stand Power adapter

Available

€129.00*
BRESSER Additional / Spare Base Station for Weather Station 7002586
Get clarity on the current wind and weather: You have purchased the BRESSER WiFi ClearView Weather Station and now know your local wind speed, wind direction, humidity, temperature, precipitation values, as well as UV level and light intensity. But where should you put the base station? In the living room, your whole family will benefit from being able to glance quickly at the clear 21 cm TRUE BLACK colour display. But wouldn’t it also be great in the bedroom, so that as soon as you’ve switched off the alarm you’ll know whether blue sky and sunshine await? With this additional BRESSER base station, you don’t need to decide on just one room. Simply connect to your 7-in-1 external sensor and you have immediate access to your measured values in another room. You can count on the usual functions whenever you need them, including reliable local weather trend forecasts for the next 12 hours, displayed as graphics, so know when to organize a spontaneous BBQ. In the winter months, the frost alarm will alert you when the external temperature falls below -3 °C: Caution, risk of black ice! You can also see the date, day of the week, time and moon phases so you have an idea of the ‘signs of the times’. Plus, for a more long-term view, the memory function stores historical measured data from the past 24 hours. Time to give your BRESSER WiFi ClearView Weather Station a breath of fresh air Are there early signs of mould formation in your bathroom? Is the air in your children’s bedroom too dry because of the central heating? The additional BRESSER base station allows you to respond to unusual situations like these with utmost flexibility, as two stations mean two separate measured results for indoor temperature, humidity and air pressure. Position the device in a critical location and the integrated sensor will measure the current room temperature, humidity and air pressure at that location. A graphical room climate indicator will alert you when the air is optimal, too dry or too damp. In addition, you can also set an independent maximum/minimum value alarm with audible and light signal on the additional station itself. On the road often? In addition to the base station at home, you can use the WiFi function to access your measured data through weather portals such as AWEKAS any time, anywhere. Or, use AWEKAS to transmit your data to your Smart Home controller. Risk more than just a glance— this BRESSER base station displays reliable weather data from your 7-in-1 external sensor at an additional location. FEATURES 8.3” colour display (19.3 x 9.3 cm) for detailed time and weather information WiFi connection with internet time synchronisation Receives weather data from the 7-in-1 external sensor and from the optional wireless thermo-hygro sensors on 868 MHz Suitable for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud Integrated sensor for indoor temperature (°C/°F), humidity and air pressure External temperature (°C/°F), humidity, wind direction, wind speed, UV level and light intensity Precise wind direction display (16 directions) Graphical weather trend display (sunny, partly cloudy, overcast, rain, storm, snow) Beaufort index display (scale for measuring wind speed) Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation) Room climate indicator Weather index display for dewpoint, windchill factor and heat index Time, calendar, day of the week and moon phase display Alarm function with snooze button Ice/frost alarm Min./max. memory (up to 24 hours) Alarm with LED indicator 3 different display brightness levels High/Low/Off 7 languages for days of the week Firmware updates supported Supports up to 7 additional wireless sensors (optional) (item no. 7009999) Integrated WiFi transmission to AWEKAS SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€179.00*
%
BRESSER Additional / Spare Base Station for Weather Station 7002510 from LOT no. 1181632
The base station from the 5-in-1 weather station – now also individually – for an overview of measured values in multiple rooms. A base station in the living room and one in the bedroom, giving you an ideal overview whichever room you’re in. The BRESSER base station works with the BRESSER 5-in-1 weather station 7002510 (LOT no. 1181632 or higher) as well as many other BRESSER weather stations. (For compatibility, see below). The clearly structured display on the base station also displays a range of history data. It enables internal storage and evaluation of the measured data over a 24-hour period. Using the measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, which is indicated on the display by six graphical symbols. There is a programmable alarm function for maximum and minimum values, which can emit an acoustic alarm and light signal if either value is reached. A special frost/ice warning alarm can also be configured for outdoor temperatures from -3 °C. A poor indoor climate can pose a particular health risk for children and the elderly. The BRESSER 5-in-1 weather station offers a smart feature to help tackle this. The indoor climate indicator uses symbols to visualise the current status of the indoor climate. In addition, the BRESSER 5-in-1 weather station also offers radio-controlled time and date setting (DCF time signal). The current central European time (CET) and date with day will be displayed within a few minutes of the device being switched on. For the moonstruck, the display also indicates the various phases of the moon. A wake function with snooze function is also included. Compatibility with the following weather stations: 7002510 BRESSER 5-in-1 Weather Station black (LOT no. 1181632 or higher)7002511 BRESSER 5-in-1 Weather Station white7002512 BRESSER WTW 5-in-1 Weather Station WTW7002520CM3000 BRESSER 5-in-1 Professional Weather Station with 256 Colour Display black7002550CM3000 BRESSER 5-in-1 Comfort Weather Station with Colour Display black PLEASE NOTE: You will find the item and LOT number of your weather station printed on the back of the base station. FEATURES Base station for 5-in-1 multisensor and other weather stations Indoor temperature (°C/°F) and humidity Graphical weather trend display (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min/max memory (up to 24 hours) LED backlight, amber-coloured with removable stand and suspension device Requires 3x AA batteries WHAT’S INCLUDED Base station Stand

Available

€63.00* €69.00* (8.7% saved)
%
BRESSER Additional / Spare Base Station for Weather Station 7002520CM3000
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 70025200000007002520CM3000Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Base station for 5-in-1 multi-sensor Compatible with weather station with item no.: 7002520CM3000 Indoor temperature (°C/°F) and humidity Graphical weather trend display (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Display changes colour based on outdoor temperature Alarm function Ice/frost warning Min./max. memory (up to 24 hours) SCOPE OF DELIVERY Base station Stand Power adapter

Available

€60.00* €99.00* (39.39% saved)
Battery Compartment Cover with Rubber Ring for 5-in-1 sensors
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519915200152011650970025107002511700251270025137002520CM300070025257002550CM30007002550GYE0007002550MGU0007002550QT500070025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070034007003600CM30007003600GYE0007003600QT500070044067802520780258078031507803300908050090808007002520000000700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

€17.99*