BRESSER Additional / Spare Base Station for Weather Station 7003100CM3000/700100GYE000/7003100HZI000
Extended view of the weather: Get the values of your existing outdoor sensor and independent info about the indoor climate in an additional room.
- Base station for ClimateScout 7-in-1 Weather Station (7003100)
- Displays a wide range of measurements and historical data
- Indoor sensor: Indoor temperature, humidity and air pressure
- Dimensions: 180 x 138 x 28 mm / Weight: 327 g
- External sensor not included!
- Modern design, clearly structured display
- Time and date setting, backlight
- Alarm with snooze button and frost warning
- Room climate indicator
- Maximum and minimum value alarm function
Product number:
7003110CM3000
EAN:
4007922070612
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER Additional / Spare Base Station for Weather Station 7003100CM3000/700100GYE000/7003100HZI000"
If you have a 7-in-1 ClimateScout Weather Station, this additional base station allows you to access the full range of functions and weather data in an additional room. For example, by placing the additional base station in your bedroom, you can view the measurements from your outdoor sensor and decide what to wear for the day based on the weather conditions. The original base station can then be kept in your living room to give everyone in your household an overview of the outdoor temperature, outdoor humidity, wind speed, wind direction, rainfall, UV and light intensity. With this additional base station, you can see what the weather is doing from both rooms! The base station also has a sleek, elegant design that was designed specially for BRESSER and fits in with all interior styles.
Monitor your indoor climate with an additional ClimateScout base station
In addition to the data from your outdoor sensors (not included), the additional base station also shows you indoor measurements. Is mould likely to develop in your bathroom? Is the air in your baby's bedroom too dry? Simply place the additional station in the corresponding location and the built-in sensor will show you the indoor temperature (°C/°F), humidity and air pressure. Happy or sad smiley, with or without drops: Thanks to the graphical indoor climate indicator, you can quickly ascertain the current comfort level and take appropriate action to improve your indoor climate. There is also a weather alarm, which allows you to set your desired maximum and minimum weather values independently of your other base station. Your additional base station will inform you when the temperature, humidity, rainfall, wind speed and other values reach your preset limits.
Radio-controlled clock
In addition to a modern design, the weather console also features a radio controlled clock that syncs the time via a DCF signal and automatically switches between winter and summer time. If you need an early start, the base station also has a built-in alarm. If you need a few extra minutes in bed, simply press the snooze button to silence the alarm for 5 minutes. During the winter, you can enable the frost alarm, which makes the alarm go off 30 minutes earlier when the outdoor temperature drops below -3 °C. The intuitive display also shows The day of the week, date and phases of the moon at the top of the screen.
View your weather data in an extra room with this additional base station!
BASE STATION FEATURES
Monitor your indoor climate with an additional ClimateScout base station
In addition to the data from your outdoor sensors (not included), the additional base station also shows you indoor measurements. Is mould likely to develop in your bathroom? Is the air in your baby's bedroom too dry? Simply place the additional station in the corresponding location and the built-in sensor will show you the indoor temperature (°C/°F), humidity and air pressure. Happy or sad smiley, with or without drops: Thanks to the graphical indoor climate indicator, you can quickly ascertain the current comfort level and take appropriate action to improve your indoor climate. There is also a weather alarm, which allows you to set your desired maximum and minimum weather values independently of your other base station. Your additional base station will inform you when the temperature, humidity, rainfall, wind speed and other values reach your preset limits.
Radio-controlled clock
In addition to a modern design, the weather console also features a radio controlled clock that syncs the time via a DCF signal and automatically switches between winter and summer time. If you need an early start, the base station also has a built-in alarm. If you need a few extra minutes in bed, simply press the snooze button to silence the alarm for 5 minutes. During the winter, you can enable the frost alarm, which makes the alarm go off 30 minutes earlier when the outdoor temperature drops below -3 °C. The intuitive display also shows The day of the week, date and phases of the moon at the top of the screen.
View your weather data in an extra room with this additional base station!
BASE STATION FEATURES
- Receives weather data from 7-in-1 outdoor sensor for ClimateScout Weather Station via 868 MHz RF transmission frequency
- Clear, professional display with time and comprehensive weather information
- Integrated sensor for indoor temperature (°C/°F), humidity and air pressure with air pressure trend (24 hours)
- Room climate indicator
- Maximum and minimum value alarm
- Automatic cycle mode displays the different channels from additional sensors (not included) in 4-second intervals
- DCF time synchronisation (Central European Time, time delay can be set for use in other time zones), automatically switches between winter and summer time
- Alarm with snooze function and frost warning
- Time, calendar, day of the week and moon phase display
- Min./max. memory (up to 24 hours)
- Backlight
- Displays the graphical weather trend (12 hours)
- Displays the outdoor temperature (°C/°F), humidity, air pressure, UV index and light intensity (Klux, Kfc, W/m2)
- Displays the Beaufort index (scale for measuring wind speed)
- Displays rainfall data: hourly, daily, weekly, monthly, total precipitation (in/mm) - with indicator
- Weather index display for dewpoint, windchill factor and heat index
- Displays day of the week and wind direction in 5 languages EN/DE/FR/ES/IT)
- Can be wall-mounted or placed on desktop
- Base station dimensions: 180 x 135 x 22 mm (W x H x D)
- Display size: 125 x 77 mm (W x H)
- Power supply: 4x AA (not included)
- Additional base station
- External sensor not included!
- Instruction manual
| Assembly required: | No |
|---|---|
| Batteries included: | No |
| Batteries required: | Yes |
| Body material: | Plastic |
| Colour: | black |
| Display size (diagonal in cm): | 14.6 |
| Extended warranty (years): | 5 |
| Material: | Plastic |
| Measurement function: | Barometric pressure , Humidity , Temperature |
| Net weight (without access.) (g): | 327 |
| Number of sensors included in the package: | 0 |
| Total height (mm): | 28 |
| Total length (mm): | 180 |
| Total width (mm): | 138 |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
- If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
- The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
- CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
- Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
- The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery
Compatible Sensors
BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
€34.95*
Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz.
Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station.This device is compatible with weather stations with the following article numbers:
15659162691642116427164447002531700254170025717002582700258670026107002620700315070032007003210700322070032307003240700330070034007003500700351070035207003700700380070039007004406700630079025317902541790258079025817902585790258679032007903210790322079032307903300790350079035109080600908070090808007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2
Compatible with the following weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 700258070025817002585WSX1001000000WSX1001CM3LC1WSX1001CM3LC2
FEATURES
Temperature measuring
Humidity measuring
7 channels settable
RC frequency: 868 MHz
Extra long radio range of 150 meters!
Suitable for smarthome systems by Tuya
Powered by battery; 2x AA (LR6) (not included!)
SCOPE OF DELIVERY
Remote sensor
Available
BRESSER Spa and Pool thermometer
€39.00*
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home.
This device is compatible with weather stations with the following article numbers:
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
FEATURES
Floating pool sensor for measuring the water temperature
LCD display for displaying the temperature (°C/°F)
Wireless frequency: 868 MHz
Wireless transmission range of up to 30 m to optional base station
7 available channels
Waterproof (IPX7)
Powered by 2x AA batteries (not included)
DELIVERY CONTENT
Pool thermometer
Instruction manual
Available
BRESSER 7-in-1 Outdoor Sensor
€119.00*
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.
Compatible with the following devices:151971519815199156601642116427164441651170025417002582700258670026107002620700330070033607003400700350070035107004406780001179025417902586790323079033007903500790351090806007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES
Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre
Measures the outdoor temperature and outdoor humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Transmission range of up to 150 metres
Place in an unobstructed location in order to obtain accurate sunlight and rain data
Power supply: 3x AA batteries (not included)
SCOPE OF DELIVERY
Wireless sensor
Mounting materials
Base station is not included!
Instruction manual
Available
BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation
€149.00*
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.
Compatible with the following devices:151971519815199156601626916421164271644416511700254170025827002586700261070026207003200700321070032207003230700324070033007003350700336070034007003500700351070037007003800700390070044067902541790258679032007903210790322079032307903300790335079035007903510908060090807007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES
Measures the temperature and humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Solar power for longer battery lifespan
Range: up to 150 m
Power supply: 3x AA batteries (not included)
Dimensions: 420 x 170 x 213 mm
SCOPE OF DELIVERY
Wireless sensor with installation material
Base station not included!
Instruction manual
Available
BRESSER Soil Temperature and Moisture Meter
€39.00*
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions.
This device is compatible with weather stations with the following article numbers:
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
FEATURES
Wireless and compact soil sensor
Measures the soil humidity
Measures the soil temperature
Transmission interval: 60 seconds
Extra-long range of up to 150 metres
Cable length: approx. 140 cm
7 available channels
LED indicator for data transmission
Weatherproof housing
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Soil sensor
Instruction manual
Available
BRESSER Precision Thermo-Hygro Sensor
€34.95*
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre.
This device is compatible with weather stations with the following article numbers:
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
FEATURES
Temperature measurement function
Humidity measurement function
7 available channels
Built-in display, can also be used as a standalone solution without a weather centre
Temperature range: -20 ~ 60℃
Wireless frequency: 868 MHz
Ultra-long range of up to 150 m
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Outdoor sensor
Instruction manual
Available
Skip product gallery
Customers also bought
%
BRESSER 7-in-1 Exclusive Weather Station ClimateScout RC
€129.00*
An exclusive Bresser designed weather station, the BRESSER 7-in-1 Weather Station ClimateScout RC Weather Station. A quick glance in the morning onto your BRESSER weather station gives you all the weather information you need for the day. Your current local outdoor temperature and humidity are shown as well as the current wind speed and direction. How much did it rain during the night? These and many others of the frequently asked weather questions are answered by a quick look onto the main station's display. Have you ever wondered why temperatures feel differently outside then you had imagined it would feel like? The new Feels Like Feature will help you with that. It takes the heat index or windchill into consideration and provides a calculated result to give you a much better indication of how the current weather actually feels outside. It sure beats running in and out and having to change clothing. The Wind Gauge has been optimized and now measures in 360° and 16 directional points, giving you very precise wind readings. Furthermore, the radiation shield has been upgraded to enhance the temperature and humidity sensor circulation. All in all this 7-in-1 complete set of weather station main unit and professional 7-in-1 weather sensor is the perfect weather station for those that want accurate and up to date information. FEATURES (main unit):Clear professional display for time & full weather information Receive your local weather data via the 7-in-1 weather sensor via 868 MHz RF
transmission frequency RCC time synchronization & automatic switch between standard and daylight saving time (DCF) For UK Users who can receive the European DCF time synchronization signal the time can be automatically received using the UK time offset functionBuzzer alarm clock with ice pre-alert function Display time, calendar, weekday & Moon phaseAble to set the moon phase display for Northern / Southern hemisphere Buzzer alarm clock with ice pre-alert function Indoor temperature (°C/°F) & humidity readings with comfort indication & trend Outdoor temperature (°C/°F) & humidity readings with trend Gust or Average wind speed (mph, m/s, km/h, knots), Beaufort & wind level Real time & dominant wind direction in 360° & 16-direction resolution UV index (0 – 16) Light intensity reading (Klux, Kfc, W/m2) Measure Rain rate, Hourly, Daily, Weekly, Monthly, Total rainfall (in/ mm) with
indicator Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Barometric pressure in relative or absolute readings (hPa, inHg, mmHg) Weather index for outdoor feels like, heat index, wind chill, dew point readings Max / Min memory records & past 24hrs hourly record Hi / Lo alert setting (indoor/ outdoor temperature & humidity) Alert setting (weather index, High wind-speed, High daily rainfall & Pressure drop) Flashing indicator for Hi/Lo alert warning on the LCD display UV and light calibration 5 languages for weekday and wind direction display (EN/ DE/ FR/ ES/ IT) Amber backlight Long-range transmission up to 150m (450 ft.) Supports up to 3 pcs wireless extra sensors , for instance 7009999 Thermo-/Hygrometer Outdoor Sensor, Pool Sensor SP6001LC2000, or Soil Sensor SP60020LC2000 (Not included) Wall mount/ desktop usage Product size: Main unit: 180 x 136 x 23 mm (W x H x D) Display VA size: 125x77mm (W x H) Battery requirements: Main unit: 4x AA ; Sensor 3x AA (Not included)FEATURES (7-in-1 SENSOR)Measurement of Outdoor Temperature and Humidity, Wind Speed and Direction, Rain Gauge, UV and Light Intensity MeasurementUp to 150 m transmission range using 868 MhZ transmission frequencyShould be placed in an unobstructed location so that sun and rain data can be used properlyCan be mounted on wall or post using the included adapterProduct size: Sensor: 344 x 394 x 136 mm (W x H x D) SCOPE OF DELIVERY1x Main Unit, additional main units can be purchased using the BRESSER item codes 7003110CM3000 (black housing), 7003110GYE000 (white housing), 700311QT5000 (grey housing)1x wireless 7-in-1 Professional Weather Sensor including mounting stand
Available
BRESSER Additional / Spare Base Station for the Wi-Fi HD TFT Professional Weather Station 7003500
€229.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
7-inch HD TFT display (17.8 cm) with versatile display modes Multi-channel overview showing live data from all wireless sensors Displays accurate readings from the 7-in-1 outdoor sensor (not included): (temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity) Seamless WLAN transmission to the AWEKAS weather portal (German interface) WLAN for sharing data on up to 3 platforms (Weather Underground, ProWeatherLive, Weathercloud, plus one additional) Graphical weather history (24 hours / 30 days) Historical data exportable to a USB drive (USB not included) Indoor temperature (°C/°F) and humidity, with trend tracking Beaufort scale for wind classification Detailed weather forecasts Air pressure monitoring Weather indices: feels-like temperature, dew point, wind chill, heat Daily and overall max/min memory Weather data calibration options Hi/Lo alarm settings for extreme conditions Custom labels for additional sensors Syncs with internet UTC time; time zone selection included Alarm clock with volume control and frost alert Time, calendar, weekday, and moon phase displays Sunrise/sunset and moonrise/moonset information Customisable display settings: light or dark mode Adjustable display brightness and contrast; day and night modes Supports six languages: English, German, French, Italian, Spanish, Dutch OTA and USB firmware updates Works with up to 7 sensors (not included, available separately) Mounting options: desktop stand or wall mounting Powered by mains adapter (included) and a CR2032 backup battery (not included)
SCOPE OF DELIVERY Base station Power adapter No wireless sensorincluded! Instruction manual
Available
BRESSER Additional / Spare Base Station for Weather Station 7003100CM3000/700100GYE000/7003100HZI000
From
€39.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit.
70031000000007003100CM3000700100GYE0007003100HZI000Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
Receives weather data from 7-in-1 outdoor sensor for ClimateScout Weather Station via 868 MHz RF transmission frequency
Clear, professional display with time and comprehensive weather information
Integrated sensor for indoor temperature (°C/°F), humidity and air pressure with air pressure trend (24 hours)
Room climate indicator
Maximum and minimum value alarm
Automatic cycle mode displays the different channels from additional sensors (not included) in 4-second intervals
DCF time synchronisation (Central European Time, time delay can be set for use in other time zones), automatically switches between winter and summer time
Alarm with snooze function and frost warning
Time, calendar, day of the week and moon phase display
Min./max. memory (up to 24 hours)
Backlight
Displays the graphical weather trend (12 hours)
Displays the outdoor temperature (°C/°F), humidity, air pressure, UV index and light intensity (Klux, Kfc, W/m2)
Displays the Beaufort index (scale for measuring wind speed)
Displays rainfall data: hourly, daily, weekly, monthly, total precipitation (in/mm) - with indicator
Weather index display for dewpoint, windchill factor and heat index
Displays day of the week and wind direction in 5 languages EN/DE/FR/ES/IT)
Can be wall-mounted or placed on desktop
Base station dimensions: 180 x 135 x 22 mm (W x H x D)
Display size: 125 x 77 mm (W x H)
Power supply: 4x AA (not included)
DELIVERY CONTENT
Additional base station
External sensor not included!
Instruction manual
Available
Skip product gallery
Customers also viewed
BRESSER Additional / Spare Base Station for Weather Station 7003100CM3000/700100GYE000/7003100HZI000
From
€39.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit.
70031000000007003100CM3000700100GYE0007003100HZI000Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
Receives weather data from 7-in-1 outdoor sensor for ClimateScout Weather Station via 868 MHz RF transmission frequency
Clear, professional display with time and comprehensive weather information
Integrated sensor for indoor temperature (°C/°F), humidity and air pressure with air pressure trend (24 hours)
Room climate indicator
Maximum and minimum value alarm
Automatic cycle mode displays the different channels from additional sensors (not included) in 4-second intervals
DCF time synchronisation (Central European Time, time delay can be set for use in other time zones), automatically switches between winter and summer time
Alarm with snooze function and frost warning
Time, calendar, day of the week and moon phase display
Min./max. memory (up to 24 hours)
Backlight
Displays the graphical weather trend (12 hours)
Displays the outdoor temperature (°C/°F), humidity, air pressure, UV index and light intensity (Klux, Kfc, W/m2)
Displays the Beaufort index (scale for measuring wind speed)
Displays rainfall data: hourly, daily, weekly, monthly, total precipitation (in/mm) - with indicator
Weather index display for dewpoint, windchill factor and heat index
Displays day of the week and wind direction in 5 languages EN/DE/FR/ES/IT)
Can be wall-mounted or placed on desktop
Base station dimensions: 180 x 135 x 22 mm (W x H x D)
Display size: 125 x 77 mm (W x H)
Power supply: 4x AA (not included)
DELIVERY CONTENT
Additional base station
External sensor not included!
Instruction manual
Available
%
BRESSER Additional / Spare Base Station for Weather Station 7003300 up to LOT No. 1599948
€117.00*
€149.00*
(21.48% saved)
NOTE: This base station is compatible with weather stations with item no. 7003300 AND LOT no. up to 1599948. You can find the item and LOT number of your weather station printed on the back of the base station.
Elegant and colourful: The additional base station allows you to view the data from your Wi-Fi comfort weather station in an additional room, such as a bedroom. The readings from your 7-in-1 outdoor sensor including outdoor temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity are transmitted wirelessly, giving your everything that you need to decide what to wear for the day.
Built-in alarm
The additional base station will help to give you a relaxing start to the day. It features a built-in alarm and a snooze button that silences the alarm to give you an extra few minutes in bed. The clock is synchronized automatically via the Internet to ensure that you won't be late to work. The modern LCD colour display can be viewed from any angle and shows you all relevant weather data including a weather forecast to help you decide what to wear for the day. The additional base station also displays a range of other useful data, including the perceived temperature, sunburn time, Beaufort level and historical data. Smart function for icy weather: Thanks to the built-in frost alarm, the alarm goes off 30 minutes earlier when the outdoor temperature drops below -3 °C.
Create the perfect indoor climate with the additional base station
In addition to the outdoor conditions such as rain, wind and sunshine, the indoor climate can have a big impact on our health and wellbeing. The base station features a built-in sensor that measures the room humidity and temperature and stores the maximum and minimum values. This helps you to take action to prevent excessively dry air in winter and stop mould from forming in rooms with a high humidity, such as the kitchen. An optimal indoor climate is indicated by a smiley face on the graphical comfort indicator. If the display shows a frowning smiley, this indicates that you need to take action to improve the indoor climate.
Get a better overview of the weather and your indoor climate with the additional base station for your Wi-Fi Comfort Weather Station.
BASE STATION FEATURES
7.4-inch colour display with detailed time and weather information
LCD display with adjustable contrast for multiple viewing angles
Wi-Fi connection for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud
Indoor temperature (°C/°F) and humidity with comfort indicator
Displays the outdoor temperature (°C/ °F) and humidity
UV index with UV level indicator
Light intensity display
Sunburn time display (in mins)
Wind speed display (gusts or average wind speed)
Beaufort scale display (scale for classifying the wind speed)
Wind direction display (current and predominant, 16 directions)
Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation)
Weather forecast (sunny, partly cloudy, overcast, rain, storm, snow)
Atmospheric pressure display
Perceived outdoor temperature
Weather index for dewpoint, windchill factor and heat index
Min./max. memory (up to 24 hours)
High/low alarm with flashing symbol on the display
Alarm with ice/frost warning
Time (synced via the Internet), date, day of the week and moon phase
Sunrise and sunset
Weather data calibration
3 different display brightness levels High/Low/Off
7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU)
Supports firmware updates
Supports 7-in-1 wireless sensor (not included)
Supports up to 7 additional wireless sensors (not included)
Dimensions: 202 x 138 x 38 mm / Weight: 510 g
Power supply: Power adapter (included) and 3x AAA backup batteries (not included)
Installation: Wall or stand
DELIVERY CONTENT
Base station
Power adapter
External sensor not included!
Instruction manual
Available
%
BRESSER 7-in-1 Exclusive Weather Station ClimateScout RC
€129.00*
An exclusive Bresser designed weather station, the BRESSER 7-in-1 Weather Station ClimateScout RC Weather Station. A quick glance in the morning onto your BRESSER weather station gives you all the weather information you need for the day. Your current local outdoor temperature and humidity are shown as well as the current wind speed and direction. How much did it rain during the night? These and many others of the frequently asked weather questions are answered by a quick look onto the main station's display. Have you ever wondered why temperatures feel differently outside then you had imagined it would feel like? The new Feels Like Feature will help you with that. It takes the heat index or windchill into consideration and provides a calculated result to give you a much better indication of how the current weather actually feels outside. It sure beats running in and out and having to change clothing. The Wind Gauge has been optimized and now measures in 360° and 16 directional points, giving you very precise wind readings. Furthermore, the radiation shield has been upgraded to enhance the temperature and humidity sensor circulation. All in all this 7-in-1 complete set of weather station main unit and professional 7-in-1 weather sensor is the perfect weather station for those that want accurate and up to date information. FEATURES (main unit):Clear professional display for time & full weather information Receive your local weather data via the 7-in-1 weather sensor via 868 MHz RF
transmission frequency RCC time synchronization & automatic switch between standard and daylight saving time (DCF) For UK Users who can receive the European DCF time synchronization signal the time can be automatically received using the UK time offset functionBuzzer alarm clock with ice pre-alert function Display time, calendar, weekday & Moon phaseAble to set the moon phase display for Northern / Southern hemisphere Buzzer alarm clock with ice pre-alert function Indoor temperature (°C/°F) & humidity readings with comfort indication & trend Outdoor temperature (°C/°F) & humidity readings with trend Gust or Average wind speed (mph, m/s, km/h, knots), Beaufort & wind level Real time & dominant wind direction in 360° & 16-direction resolution UV index (0 – 16) Light intensity reading (Klux, Kfc, W/m2) Measure Rain rate, Hourly, Daily, Weekly, Monthly, Total rainfall (in/ mm) with
indicator Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Barometric pressure in relative or absolute readings (hPa, inHg, mmHg) Weather index for outdoor feels like, heat index, wind chill, dew point readings Max / Min memory records & past 24hrs hourly record Hi / Lo alert setting (indoor/ outdoor temperature & humidity) Alert setting (weather index, High wind-speed, High daily rainfall & Pressure drop) Flashing indicator for Hi/Lo alert warning on the LCD display UV and light calibration 5 languages for weekday and wind direction display (EN/ DE/ FR/ ES/ IT) Amber backlight Long-range transmission up to 150m (450 ft.) Supports up to 3 pcs wireless extra sensors , for instance 7009999 Thermo-/Hygrometer Outdoor Sensor, Pool Sensor SP6001LC2000, or Soil Sensor SP60020LC2000 (Not included) Wall mount/ desktop usage Product size: Main unit: 180 x 136 x 23 mm (W x H x D) Display VA size: 125x77mm (W x H) Battery requirements: Main unit: 4x AA ; Sensor 3x AA (Not included)FEATURES (7-in-1 SENSOR)Measurement of Outdoor Temperature and Humidity, Wind Speed and Direction, Rain Gauge, UV and Light Intensity MeasurementUp to 150 m transmission range using 868 MhZ transmission frequencyShould be placed in an unobstructed location so that sun and rain data can be used properlyCan be mounted on wall or post using the included adapterProduct size: Sensor: 344 x 394 x 136 mm (W x H x D) SCOPE OF DELIVERY1x Main Unit, additional main units can be purchased using the BRESSER item codes 7003110CM3000 (black housing), 7003110GYE000 (white housing), 700311QT5000 (grey housing)1x wireless 7-in-1 Professional Weather Sensor including mounting stand
Available
BRESSER Thermo-Hygrometer with Ventilation Recommendation VentAir H
€29.99*
Get a true room climate expert now with the BRESSER Thermo-Hygrometer with Ventilation Recommendation VentAir H. You can easily read on the stylish screen whether it is time for fresh air. Perfect for effectively preventing mould and excessively dry air! Additionally, the high-quality thermometer and hygrometer precisely measure the temperature and humidity indoors as well as outdoors. And with the additional comfort indicator, you can always keep an optimal eye on the room climate.
Intuitive operation and practical functions
Effortlessly achieve the perfect room climate: The thermo-hygrometer with ventilation recommendation is equipped with user-friendly touch buttons. Interested in the highs and lows of your room's air quality? Simply call up the maximum and minimum values for temperature and humidity. This way, you can also keep an eye on the development of your room climate. Flexible placement thanks to high-quality outdoor sensor
Whether in the garden, on the balcony, or in the front yard – with a range of up to 50 m, you have plenty of flexibility in where you place it. The integrated display shows the current temperature and humidity values directly on site. Naturally, the wireless sensor is water-repellent, making it perfect for outdoor use.
Ensure fresh air at home, in the office, and more – with the BRESSER Thermo-Hygrometer with Ventilation Recommendation VentAir H.
BASE STATION FEATURES
Ventilation recommendation for easy improvement of room climate
Ideal for early prevention of mould and excessively dry indoor air
Room climate comfort indicator
Outdoor temperature (°C / °F)
Indoor temperature (°C / °F)
Relative humidity (indoor and outdoor) (%)
Time display
Operation via user-friendly touch buttons on the display
Min/Max value memory for temperature and humidity
With backlight
Thermo-hygro outdoor sensor (1x included)
Range: up to 50 m
Battery operated: 3x AAA batteries (not included)
OUTDOOR SENSOR FEATURES
Measurement of temperature and humidity
Clear LCD display
IP protection class: IP44
Dimensions: 71 x 65 x 23 mm / Weight: 44 g
Battery operated: 2x AAA batteries (not included)
SCOPE OF DELIVERY
Base station
Outdoor sensor
User manual
Available
Grey Wind Vane
€17.99*
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519915200152011650970025107002511700251270025137002520CM300070025257002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002582700258570025867002590700261070026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT5000700440678025207802580780315078033009080500908060096025107002520000000700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000
Available
