BRESSER Additional / Spare Base Station for Weather Station 7003100CM3000/700100GYE000/7003100HZI000
Extended view of the weather: Get the values of your existing outdoor sensor and independent info about the indoor climate in an additional room.
- Base station for ClimateScout 7-in-1 Weather Station (7003100)
- Displays a wide range of measurements and historical data
- Indoor sensor: Indoor temperature, humidity and air pressure
- Dimensions: 180 x 138 x 28 mm / Weight: 327 g
- External sensor not included!
- Modern design, clearly structured display
- Time and date setting, backlight
- Alarm with snooze button and frost warning
- Room climate indicator
- Maximum and minimum value alarm function
€69.00*
Currently not available
Product number:
7003110QT5000
EAN:
4007922070629
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER Additional / Spare Base Station for Weather Station 7003100CM3000/700100GYE000/7003100HZI000"
If you have a 7-in-1 ClimateScout Weather Station, this additional base station allows you to access the full range of functions and weather data in an additional room. For example, by placing the additional base station in your bedroom, you can view the measurements from your outdoor sensor and decide what to wear for the day based on the weather conditions. The original base station can then be kept in your living room to give everyone in your household an overview of the outdoor temperature, outdoor humidity, wind speed, wind direction, rainfall, UV and light intensity. With this additional base station, you can see what the weather is doing from both rooms! The base station also has a sleek, elegant design that was designed specially for BRESSER and fits in with all interior styles.
Monitor your indoor climate with an additional ClimateScout base station
In addition to the data from your outdoor sensors (not included), the additional base station also shows you indoor measurements. Is mould likely to develop in your bathroom? Is the air in your baby's bedroom too dry? Simply place the additional station in the corresponding location and the built-in sensor will show you the indoor temperature (°C/°F), humidity and air pressure. Happy or sad smiley, with or without drops: Thanks to the graphical indoor climate indicator, you can quickly ascertain the current comfort level and take appropriate action to improve your indoor climate. There is also a weather alarm, which allows you to set your desired maximum and minimum weather values independently of your other base station. Your additional base station will inform you when the temperature, humidity, rainfall, wind speed and other values reach your preset limits.
Radio-controlled clock
In addition to a modern design, the weather console also features a radio controlled clock that syncs the time via a DCF signal and automatically switches between winter and summer time. If you need an early start, the base station also has a built-in alarm. If you need a few extra minutes in bed, simply press the snooze button to silence the alarm for 5 minutes. During the winter, you can enable the frost alarm, which makes the alarm go off 30 minutes earlier when the outdoor temperature drops below -3 °C. The intuitive display also shows The day of the week, date and phases of the moon at the top of the screen.
View your weather data in an extra room with this additional base station!
BASE STATION FEATURES
Monitor your indoor climate with an additional ClimateScout base station
In addition to the data from your outdoor sensors (not included), the additional base station also shows you indoor measurements. Is mould likely to develop in your bathroom? Is the air in your baby's bedroom too dry? Simply place the additional station in the corresponding location and the built-in sensor will show you the indoor temperature (°C/°F), humidity and air pressure. Happy or sad smiley, with or without drops: Thanks to the graphical indoor climate indicator, you can quickly ascertain the current comfort level and take appropriate action to improve your indoor climate. There is also a weather alarm, which allows you to set your desired maximum and minimum weather values independently of your other base station. Your additional base station will inform you when the temperature, humidity, rainfall, wind speed and other values reach your preset limits.
Radio-controlled clock
In addition to a modern design, the weather console also features a radio controlled clock that syncs the time via a DCF signal and automatically switches between winter and summer time. If you need an early start, the base station also has a built-in alarm. If you need a few extra minutes in bed, simply press the snooze button to silence the alarm for 5 minutes. During the winter, you can enable the frost alarm, which makes the alarm go off 30 minutes earlier when the outdoor temperature drops below -3 °C. The intuitive display also shows The day of the week, date and phases of the moon at the top of the screen.
View your weather data in an extra room with this additional base station!
BASE STATION FEATURES
- Receives weather data from 7-in-1 outdoor sensor for ClimateScout Weather Station via 868 MHz RF transmission frequency
- Clear, professional display with time and comprehensive weather information
- Integrated sensor for indoor temperature (°C/°F), humidity and air pressure with air pressure trend (24 hours)
- Room climate indicator
- Maximum and minimum value alarm
- Automatic cycle mode displays the different channels from additional sensors (not included) in 4-second intervals
- DCF time synchronisation (Central European Time, time delay can be set for use in other time zones), automatically switches between winter and summer time
- Alarm with snooze function and frost warning
- Time, calendar, day of the week and moon phase display
- Min./max. memory (up to 24 hours)
- Backlight
- Displays the graphical weather trend (12 hours)
- Displays the outdoor temperature (°C/°F), humidity, air pressure, UV index and light intensity (Klux, Kfc, W/m2)
- Displays the Beaufort index (scale for measuring wind speed)
- Displays rainfall data: hourly, daily, weekly, monthly, total precipitation (in/mm) - with indicator
- Weather index display for dewpoint, windchill factor and heat index
- Displays day of the week and wind direction in 5 languages EN/DE/FR/ES/IT)
- Can be wall-mounted or placed on desktop
- Base station dimensions: 180 x 135 x 22 mm (W x H x D)
- Display size: 125 x 77 mm (W x H)
- Power supply: 4x AA (not included)
- Additional base station
- External sensor not included!
- Instruction manual
| Assembly required: | No |
|---|---|
| Batteries included: | No |
| Batteries required: | Yes |
| Body material: | Plastic |
| Colour: | black |
| Display size (diagonal in cm): | 14.6 |
| Extended warranty (years): | 5 |
| Material: | Plastic |
| Measurement function: | Barometric pressure , Humidity , Temperature |
| Net weight (without access.) (g): | 327 |
| Number of sensors included in the package: | 0 |
| Total height (mm): | 28 |
| Total length (mm): | 180 |
| Total width (mm): | 138 |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
- If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
- The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
- CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
- Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
- The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery
Compatible Sensors
BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
€34.95*
Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz.
Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station.This device is compatible with weather stations with the following article numbers:
15659162691642116427164447002531700254170025717002582700258670026107002620700315070032007003210700322070032307003240700330070034007003500700351070035207003700700380070039007004406700630079025317902541790258079025817902585790258679032007903210790322079032307903300790350079035109080600908070090808007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2
Compatible with the following weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 700258070025817002585WSX1001000000WSX1001CM3LC1WSX1001CM3LC2
FEATURES
Temperature measuring
Humidity measuring
7 channels settable
RC frequency: 868 MHz
Extra long radio range of 150 meters!
Suitable for smarthome systems by Tuya
Powered by battery; 2x AA (LR6) (not included!)
SCOPE OF DELIVERY
Remote sensor
Available
BRESSER Spa and Pool thermometer
€39.00*
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home.
This device is compatible with weather stations with the following article numbers:
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
FEATURES
Floating pool sensor for measuring the water temperature
LCD display for displaying the temperature (°C/°F)
Wireless frequency: 868 MHz
Wireless transmission range of up to 30 m to optional base station
7 available channels
Waterproof (IPX7)
Powered by 2x AA batteries (not included)
DELIVERY CONTENT
Pool thermometer
Instruction manual
Available
BRESSER 7-in-1 Outdoor Sensor
€119.00*
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.
Compatible with the following devices:151971519815199156601642116427164441651170025417002582700258670026107002620700330070033607003400700350070035107004406780001179025417902586790323079033007903500790351090806007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES
Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre
Measures the outdoor temperature and outdoor humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Transmission range of up to 150 metres
Place in an unobstructed location in order to obtain accurate sunlight and rain data
Power supply: 3x AA batteries (not included)
SCOPE OF DELIVERY
Wireless sensor
Mounting materials
Base station is not included!
Instruction manual
Available
BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation
€149.00*
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.
Compatible with the following devices:151971519815199156601626916421164271644416511700254170025827002586700261070026207003200700321070032207003230700324070033007003350700336070034007003500700351070037007003800700390070044067902541790258679032007903210790322079032307903300790335079035007903510908060090807007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES
Measures the temperature and humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Solar power for longer battery lifespan
Range: up to 150 m
Power supply: 3x AA batteries (not included)
Dimensions: 420 x 170 x 213 mm
SCOPE OF DELIVERY
Wireless sensor with installation material
Base station not included!
Instruction manual
Available
BRESSER Soil Temperature and Moisture Meter
€39.00*
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions.
This device is compatible with weather stations with the following article numbers:
151961519715198151991520115439154401565915660162691642116427164441647916508165117002541700258070025817002582700258570025867002610700262070031507003200700321070032207003230700324070033007003400700350070035107003520700370070038007003900700440670063007902541790258079025817902585790258679032007903210790322079032307903300790350079035109080600908070090808007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX1001000000WSX1001CM3LC1WSX1001CM3LC2WSX3001000000WSX3001CM3LC1WSX3001CM3LC2
FEATURES
Wireless and compact soil sensor
Measures the soil humidity
Measures the soil temperature
Transmission interval: 60 seconds
Extra-long range of up to 150 metres
Cable length: approx. 140 cm
7 available channels
LED indicator for data transmission
Weatherproof housing
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Soil sensor
Instruction manual
Available
BRESSER Precision Thermo-Hygro Sensor
€34.95*
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre.
This device is compatible with weather stations with the following article numbers:
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
FEATURES
Temperature measurement function
Humidity measurement function
7 available channels
Built-in display, can also be used as a standalone solution without a weather centre
Temperature range: -20 ~ 60℃
Wireless frequency: 868 MHz
Ultra-long range of up to 150 m
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Outdoor sensor
Instruction manual
Available
Skip product gallery
Customers also viewed
BRESSER Additional / Replacement Base Station for 7003510 MeteoChamp Weather Station
€329.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
Large 17.8 cm (7-inch) HD TFT colour display with various display modes
Multi-channel overviews for displaying all live data from the wireless sensors
Publish your weather data via Wi-Fi on up to 3 weather platforms
(ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform)
Measures the indoor temperature and humidity
Displays the graphical weather trend (last 24 hours)
Weather forecast
Beaufort scale display (scale for classifying the wind speed)
Air pressure
Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index)
Maximum/minimum value memory
Trend display for all temperature and humidity measurements
Historical data log, exportable to USB drive (not included)
Individually configurable weather alarm for different measurements
Weather data calibration
Synchronization with Internet UTC time with time zone selection
Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times
Built-in alarm with ice/frost alarm
Choose between dark or light display
Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually)
7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE)
Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system)
Supports up to 7 wireless sensors (not included, see accessories)
Mounting options: Can be placed on tabletop with built-in stand or wall-mounted
Power supply: Power adapter (included), CR2032 backup battery (not included)
SCOPE OF DELIVERY
Base station
Power adapter
External sensor not included!
Instruction manual
Available
BRESSER Additional / Spare Base Station for Weather Station 7003100CM3000/700100GYE000/7003100HZI000
From
€39.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit.
70031000000007003100CM3000700100GYE0007003100HZI000Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
Receives weather data from 7-in-1 outdoor sensor for ClimateScout Weather Station via 868 MHz RF transmission frequency
Clear, professional display with time and comprehensive weather information
Integrated sensor for indoor temperature (°C/°F), humidity and air pressure with air pressure trend (24 hours)
Room climate indicator
Maximum and minimum value alarm
Automatic cycle mode displays the different channels from additional sensors (not included) in 4-second intervals
DCF time synchronisation (Central European Time, time delay can be set for use in other time zones), automatically switches between winter and summer time
Alarm with snooze function and frost warning
Time, calendar, day of the week and moon phase display
Min./max. memory (up to 24 hours)
Backlight
Displays the graphical weather trend (12 hours)
Displays the outdoor temperature (°C/°F), humidity, air pressure, UV index and light intensity (Klux, Kfc, W/m2)
Displays the Beaufort index (scale for measuring wind speed)
Displays rainfall data: hourly, daily, weekly, monthly, total precipitation (in/mm) - with indicator
Weather index display for dewpoint, windchill factor and heat index
Displays day of the week and wind direction in 5 languages EN/DE/FR/ES/IT)
Can be wall-mounted or placed on desktop
Base station dimensions: 180 x 135 x 22 mm (W x H x D)
Display size: 125 x 77 mm (W x H)
Power supply: 4x AA (not included)
DELIVERY CONTENT
Additional base station
External sensor not included!
Instruction manual
Available
