BRESSER Barlow Lens 2x 1.25"

Quality Barlow lens with 2x magnification factor and a plug-in diameter of 1.25 inch (31.7mm). Suitable for the BRESSER Carbon Look telescope series as a spare part.

  • BRESSER barlow lens with 2x magnification
  • Barrel diameter 1.25 inch (31.7mm)
  • Allows double magnification for more detail
  • Suitable as accessory for the BRESSER Carbon Look Telescope series among others as a spare part
  • Coated lenses to reduce light reflections

€12.90*

Available, delivery time: 1-3 days

Product number: 4901200
EAN: 4007922076423
WEEE-Reg.-Nr.: DE 34323861

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!
Product information "BRESSER Barlow Lens 2x 1.25""
BRESSER Barlow Lens 2x 1.25”

Category: Spare Part for Carbon Look Telescope Series 

Description: The BRESSER Barlow Lens with 2x magnification and a barrel diameter of 1.25 inches (31.7mm) enables double magnification for more detail. Suitable as an accessory and spare part for the BRESSER Carbon Look Telescope series.
Batteries required: No
Colour: black
Material: Aluminium

Produkt- und Sicherheitshinweise


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.

Customers also bought

BRESSER Eyepiece K 20mm 1.25"
BRESSER Eyepiece K 20mm 1.25" Category: Replacement part for Carbon Look Telescope series Description: The BRESSER Eyepiece K 20mm 1.25" is a quality eyepiece with a focal length of 20mm. The fitting diameter is 1.25 inches (31.7mm), suitable for standard magnifications. Suitable as a replacement part for the BRESSER Carbon Look Telescope series. The lens surfaces are coated to suppress reflections. The reversible rubber eyecup provides additional comfort.

€12.90*
BRESSER Eyepiece K 4mm 1.25"
BRESSER Eyepiece K 4mm 1.25”Category: Spare Part for Carbon Look Telescope Series Description: The BRESSER Eyepiece K 4mm 1.25 is a quality eyepiece with a focal length of 4mm, perfect for highly magnified observations of celestial objects like planets. The barrel diameter is 1.25 inches (31.7mm). Suitable as a spare part for the BRESSER Carbon Look Telescope series. The reversible rubber eyecup provides additional comfort."

€12.90*
BRESSER Eyepiece K 10mm 1.25"
BRESSER Eyepiece K 10mm 1.25" Category: Replacement part for the Carbon Look Telescope series Description: The BRESSER Eyepiece K 10mm 1.25" is a quality eyepiece with a focal length of 10mm, ideal for medium magnifications. The fitting diameter is 1.25 inches (31.7mm). Suitable as a replacement part for the BRESSER Carbon Look Telescope series. The lens surfaces are coated to suppress reflections. The reversible rubber eyecup ensures comfortable observations.

€12.90*
BRESSER 10mm Plössl eyepiece 31,7mm/1,25"
BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 10 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

€29.00*
BRESSER Barlow Lens 3x 1.25"
BRESSER Barlow Lens 3x 1.25”Category: Spare Part for Carbon Look Telescope SeriesDescription: The BRESSER Barlow Lens with 3x magnification and a barrel diameter of 1.25 inches (31.7mm) enables triple magnification for more detail. Suitable as an accessory and spare part for the BRESSER Carbon Look Telescope series.

€12.90*
BRESSER Universal Smartphone Adapter Deluxe
Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

€14.90*

Customers also viewed

BRESSER Barlow Lens 2x 31.8mm/1.25"
With the usage of barlow lenses, you can extend the equivalent focal length of telescopes and hence increase the magnification of your observed targets. Subsequently, you can use lower power eyepieces in Barlows to act as much more powerful eyepieces, but retain the larger ocular size and more comfortable viewing that comes with lower power eyepiece designs.Due to their two lens design, these Barlow lenses provide a brilliant image quality for the whole visual field and are suitable for observations and photography.  The black coloured Barlow element cell in this BRESSER Barlow Lens 2x 31.8mm/1.25," can be unscrewed and has the same thread as 1.25" filters, allowing it to be mounted in 1.25" eyepieces, t-adapters and other accessories, giving you flexibility of use and the ability to vary magnification in different accessories.  For instance, the black Barlow cell screwed into the average length nosepiece of a standard push fit t-adapter will give around 1.6x magnification on an attached DSLR.  This can be very useful when trying to get to photographic focus with some Newtonians and Solar Telescopes, which lack the necessary amount of in focus travel to get a camera to a prime focus position.FEATURESsuitable for observations and photographydoubling of the focal lengthtwo lens designfully multi-coatedWHAT'S INCLUDEDBarlow lens (1pc)

€29.90*
BRESSER Barlow Lens 3x 1.25"
BRESSER Barlow Lens 3x 1.25”Category: Spare Part for Carbon Look Telescope SeriesDescription: The BRESSER Barlow Lens with 3x magnification and a barrel diameter of 1.25 inches (31.7mm) enables triple magnification for more detail. Suitable as an accessory and spare part for the BRESSER Carbon Look Telescope series.

€12.90*
BRESSER Achromatic 3x (1.25") Barlow Lens
The magnification of your telescope can be trippled with the use of this achromatic BRESSER Barlow Lens 3x 31.7 mm (1.25'').

€32.00*
BRESSER Eyepiece K 10mm 1.25"
BRESSER Eyepiece K 10mm 1.25" Category: Replacement part for the Carbon Look Telescope series Description: The BRESSER Eyepiece K 10mm 1.25" is a quality eyepiece with a focal length of 10mm, ideal for medium magnifications. The fitting diameter is 1.25 inches (31.7mm). Suitable as a replacement part for the BRESSER Carbon Look Telescope series. The lens surfaces are coated to suppress reflections. The reversible rubber eyecup ensures comfortable observations.

€12.90*
BRESSER Star Diagonal 90 Degrees 1.25"
BRESSER Star Diagonal 90 Degrees 1.25”Category: Spare Part for Carbon Look Telescope SeriesDescription: The BRESSER Star Diagonal with a 90-degree angle and a barrel diameter of 1.25 inches (31.7mm) provides comfortable and upright observations, especially at the zenith. Suitable ONLY for refractors (lens telescopes) and ideal as a spare part for the BRESSER Carbon Look Telescope series.Note: NOT suitable for reflectors (Newtonian telescopes, reflecting telescopes)!

€12.90*
Vixen 2x Barlow Lens with T2 Thread
This Barlow lens doubles the focal length of your telescope. It allows you to make astronomical observations with a higher magnification than a conventional eyepiece. Thanks to the Barlow lens between the eyepiece, you can obtain a greater magnification whilst maintaining a comfortable interpupillary distance.This Vixen 2x Barlow lens is ideal for observing and photographing lunar landscapes and details on the brighter planets. The Barlow lens also features a T2 connection for photography with DSLR cameras. With T2 extension tubes, it can also be used as a camera projection adapter.With a deflecting prism, the Barlow lens enables you to obtain a magnification factor of 3.3x.FEATURES2x Barlow lenses with T2 thread2-lens optical systemDoubles the magnification factorAlso suitable as a camera adapter31.7 mm sleeveWeight: 80 gDELIVERY CONTENT 2x Barlow lenses Dust caps

€59.00*
BRESSER 10mm Plössl eyepiece 31,7mm/1,25"
BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 10 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

€29.00*