BRESSER Barlow Lens 3x 1.0"/24.5mm Barrel Diameter

The BRESSER Biolux NV comes with a wide range of accessories and is an ideal beginners' microscope. A unique feature of these models, the Barlow zoom system is inside the eyepiece tubes: With the barlow lens the magnification can be  varied by a factor of 2 in visual observation. This feature, together with 3 objectives and 2 interchangeable wide field eyepieces gives a magnification range from 20x to 1280x. With the mechanical desk you can move your sample precisely even when observing at high magnifications. For optimal illumination a variable LED for transmitted and incident light together with a filter wheel gives the ideal light for all samples. Light from above is especially imortant to observe non transparent samples like leaves, small insects and much more. This makes microscopy for beginners very easy! The power is supplied by batteries (3x AA). A dust cover, 5 prepared slides and 5 blank slides and cover slips are included for making your own samples. With the included HD camera you can observe your samples on the computer screen, and capture images and video with the included Windows software. The software is compatible with Windows 10 and 11. With this camera, you can always document your interesting observations and share them with others. FEATURESbiological microscope with HD cameraLED light for transmitted and incident lightbattery-poweredlots of accessoriesincident light for objects not higher than 4mm SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYSolid metal Microscopemechanical deskHD camera with metal housing, resolution 1280 x 7202 eyepieces: 5x and 16x3 objectives: 4x, 10x and 40x1 Barlow lens with 2x magnificationMicroscope toolsmechanical cross table5 prepared slides5 blank slidesDust cover and hard case

BRESSER Barlow Lens 3x 1.25”Category: Spare Part for Carbon Look Telescope SeriesDescription: The BRESSER Barlow Lens with 3x magnification and a barrel diameter of 1.25 inches (31.7mm) enables triple magnification for more detail. Suitable as an accessory and spare part for the BRESSER Carbon Look Telescope series.

"BRESSER Eyepiece 4mm 1.0”/24.5mm Barrel Diameter Category: Spare Part suitable for BRESSER JUNIOR Telescope Series Description: The high-quality eyepiece with a 4mm focal length offers the highest magnifications and, with a barrel diameter of 1.0 inch (24.5mm), is ideal for most models of the BRESSER JUNIOR Telescope series. Please measure the inner barrel diameter of the connection on your telescope before ordering."

"BRESSER Eyepiece 12.5mm 1.0''/24.5mm Barrel Diameter Category: Spare Part suitable for BRESSER JUNIOR Telescope Series Description: The eyepiece with a 12.5mm focal length is suitable for versatile observations and medium magnifications. With a barrel diameter of 1.0 inch (24.5mm), it is suitable for most models of the BRESSER JUNIOR Telescope series. Please measure the inner barrel diameter of the connection on your telescope before ordering."

BRESSER Erecting Lens 1.5x 1.0''/24.5mm Barrel Diameter Category: Spare Part suitable for BRESSER JUNIOR Telescope Series Description: The erecting lens with 1.5x magnification is ideal for correct-side-up observations. With a barrel diameter of 1.0 inch (24.5mm), it is ideal for most models of the BRESSER JUNIOR Telescope series. Not suitable for reflecting telescopes (reflectors). Please measure the inner barrel diameter of the connection on your telescope before ordering.

You see better with two eyesThe BRESSER BinoViewer Deluxe makes it possible to observe astronomical objects in a relaxed way with both eyes and with considerably more detail than using one eye. The images created of the moon, planets and globular clusters are particularly impressive. But also with deep-sky objects such as the Orion Nebula the detection of details is much easier. At the same time this binoviewer is very easy to handle. Thanks to the newly patented optical system you can get into focus with any telescope. All you need is a pair of identical eyepieces to enjoy this dramatic and immersive viewing experience.How to use the BinoViewer? Since the BRESSER BinoViewer Deluxe does not require an additional light path (back focus), it can be used with any telescope - including Newtonians and short focus refracting telescopes, which traditionally suffered when using standard binoviewers. No light path corrector or similar accessory is necessary. If a standard 1.25'' eyepiece can be focused, the binoviewer will also work. The eyepiece focal length and field of view size of the eyepieces used are fully retained. As with binoculars one eyepiece is focused first using the telescope focuser. Then the second eyepiece can be brought into focus using the helical focuser on the binoviewer. The required interpupillary distance is then elegantly adjusted to a range of 58–74mm with the help of a linear sliding mechanism, with graduated marker, to help you find your ideal interocular setting quickly.  Self-centring helical eyepiece grips, rather than side-mounted thumbscrew eyepiece retainers are used, decreasing the chance of offsetting collimation of both eyepiece to each other.  The fact that this design of binoviewer uses a well-engineered linear slide mechanism to adjust interpupillary distance, rather than a cheaper-to-produce traditional hinged design also helps retention of collimation.Which objects can be observed with this accessory?Actually, all objects that were previously observed with the telescope in question, but only monocularly with one eye. Because there is no magnification factor at the binoviewer, even low magnifications can be achieved. This makes not only the moon, planets and globular clusters, but also the brighter deep-sky objects very interesting observation targets. The use of two eyes leads to a more relaxed view than using one eye alone.  Although true depth of field viewing at infinity is a little beyond most telescopes and binoviewers, users will note how the human brain attempts to impose depth of field ("3d-like") effects on stereo views through binoviewers.  The biggest difference that most observers comment upon when comparing views through binoviewers like these, as opposed to single monocular eyepiece views, is the extra detail that can be seen in most observable targets.  Relaxed viewing and extra detail in objects are the two main benefits of binoviewing, which the BRESSER Bino Viewer Deluxe 1.25'' delivers in abundance.Also ideal as an accessory for solar telescopesA very special application is the use of the BRESSER BinoViewer Deluxe in combination with all solar telescopes. The spherical shape of the sun with all its surface details is shown very impressively.  The depth of field effects of seeing filaments silhouetted against the solar surface are particularly enjoyable to observe.Important note: Do not use the BRESSER Binoviwer Deluxe without a suitable solar telescope or a safe solar filter in front of the telescopes objective lens . Otherwise, there is an acute risk of going blind.High-quality mechanics and materialsThe entire BRESSER BinoViewer Deluxe is made of high-quality materials. Except for the outer plastic covers all components are made of anodised aluminium. Particularly remarkable are the low-backlash sliding mechanism for adjusting the interpupillary distance and the precise rotary clamping of both eyepiece adapters. The wide clamping surface holds the eyepieces in place securely and also centres them automatically on the optical axis. The one-sided dioptric adjustment has a backlash-free helical drive and enables the finest corrections. For safe transport a high-quality hard-shell transport case is included in the scope of delivery.Which eyepieces can be used?All eyepieces with a 1.25'' barrel and a field stop of up to 22mm. Depending on the interpupillary distance the outer diameter of the eyepiece housing should not exceed a value of approximately 50 mm.Filter thread 1.25'' availableNo 2nd filter sets are necessary to operate the BRESSER Binocular Approach Deluxe. The desired colour or nebula filter can be screwed directly into the 1.25'' nosepiece. in this configuration, when changing the eyepieces to affect a change in magnification, no swapping of filters is necessary.  Unique mirror-lens system with Ohara (Japan) lanthanum glass material The BRESSER Binocular Viewer Deluxe is equipped with a unique mirror-lens system. This has the advantage of higher light transmission and less color aberration. The resulting image is simply brighter and sharper. To achieve this the exclusive Ohara (Japan) lanthanum glass material has been used and in addition all optical surfaces are equipped with a full multi-layer broadband coating. Finally the beam-splitting mirror has a 99% dielectric coating and completes the excellent optical design.FEATURESEnables binocular observations with all telescopesRelaxed and comfortable viewingThree-dimensional viewing experienceSuitable for all telescopes with 1.25'' eyepiece connectionNo additional light path requiredNo magnification factor at the binocular attachmentEven low magnifications with large fields of view are achievableFor observing moon, planets and deep sky objectsPrecise and robust mechanicsSliding mechanism to adjust the interpupillary distanceDioptric compensation via fine helical driveWide eyepiece rotation clamp with automatic centeringFilter thread 1.25'' (M28.5 x 0.6mm) availableLens and mirror design made of finest Ohara (Japan) lanthanum glass materialAdvanced broadband multilayer coating on all optical surfaces99 % dielectric-coated beam-splitting mirrorHigh-quality hard-shell carrying case includedWHAT'S INCLUDEDBino Viewer DeluxeDust capsCarrying case 

The BRESSER camera adapter is the ideal connecting piece between your 35 mm SLR camera or DSLR and your telescope. The adapter is suitable for 1.25" eyepieces with a larger housing diameter of up to 55 mm. Please note, this adapter will be suitable for most Refractors and Cassegrain designs, but may not be suitable for use with all Newtonian designs of telescopes, due to the comparatively short travel of focus in some Newtonians. Please check with us if you'd like further advice regarding your particular telescope.FEATURESvariable camera adapterfor eyepiece projection and prime focusincludes a short prime focus adapter from 1.25" to T2 threadsuitable for 1.25" eyepieces up to 55mm housing diameter barrel diameter: 31.7mm (1.25")WHAT'S INCLUDEDvariable camera adapter