BRESSER BR-06B telescopic Boom Arm 79-180cm

Your new right hand in the studio: The BRESSER 110-116BM 3 Section Boom Arm scores with its 3 sections and the possibilty to position lamps at right angles. Need a perfect lightning from above? Nothing could be easier, because this boom arm masters even difficult lightning situations in the whole range of video production and photography easily. I supports you in different ways of working: Use it in the possible total length of 245 cm on a tripod with spigot connection, or hold the solidly made boom arm comfortably in your hand with the 2 padded handles and add light formers or microphones. As a boom arm stand, the unit shows its versatility.3 section boom arm: All good things in three!Simply threefold practical: the 3 sections can be adapted to suit the current purpose. But they are not only strong as a team, they also do a really good job separately. The telescopic pole, which is held by a sturdy clamp, brings a particulary high degree of flexibilty to the studio. You can extend the telescopic section from 79 to 153 cm and use it with a spigot connection. The main section can be attached to the variable tilt connection and measures 79 cm. And if things do get heavy: The centre piece with the tilt connection ( gallows) is connected with a clamp into which you can insert 2 sections and screw them tight.This multifunctional extension arm is guaranteed to do a good job in the photostudio and video production, because despite the sturdy construction with a tube diameter of 2,5 cm and 2,8 cm it is a real lightweight with only 1160 g. In addition, the powder-coated aluminium for less relfection is easy to handle. You can ensure the right balance for heavy weight lamps with the supplied conterweight bag. Simply fill the two cpompartments of the bag and with the the practical strap, yu can quickly attach the conterweight to the boom arm.But notice: For maximum stability the conterweight must correspond to the weight of the mounted studio flash or light shaper!You should not exceed the realistic maximum load of 3 to 4 Kg when using the extension arm.PROPERTIESMultifunctional aluminium boom armTelescopic functionHandels for comfortable workingFor photo and video productionLoad capacity from 3- 4 kgCan be used as a boom arm and lamp tripodHigh -quality and stable constructionSCOPE OF DELVERY1x Boom arm with 3 sections and spigot connection1x Conterweight- sand bag with velcro fastener2x Nylon bag for sand

This sandbag can be filled with sand or weights and be hung on a boom arm. It also can be used to weigh down a light stand in order to give it more stability.FEATURESfillable sandbag2 separate compartmentscounterweight for boom armsdimensions (open): 45 x 24 cmSCOPE OF DELIVERY1x sandbag1x carabiner

Set off on your personal journey to the stars with the BRESSER Sirius 70/900 AZ lens telescope. The complete astronomy set already includes everything you need to start observing the sky: the astronomical lens telescope with 70 mm aperture and 900 mm focal length, the azimuthal mount, the tripod and a wide range of accessories for fascinating discoveries. At the same time, it is very easy to operate - ideal to amaze even children with a view of the night sky. Simply a stargazing classic - the telescope With this lens telescope - a so-called Fraunhofer achromatic refractor - even total astro-beginners and children can easily explore the secrets of our night sky. Because this classic design impresses with its special user-friendliness and easy handling. To ensure that you enjoy good imaging properties when looking at the Moon, Sun, planets and star clusters, the entry-level telescope has been equipped with modern, precisely coated optics. The 70 mm aperture collects a total of 100 times more light than the human eye. And it is also convincing compared to a comparable 60 mm telescope: the light gathering capacity is 36 % higher and the resolving power is also better. Thus, with the 70 mm lens telescope, significantly more details are visible at the same magnification, e.g. on Saturn's rings or the two main cloud bands of Jupiter. But how big do the celestial objects appear then? The resolution of the 70 mm lens lets you enjoy really sharp images at magnifications up to about 140x. For comparison: with a 60 mm aperture, this is only possible up to 120x. Technically, of course, the starter telescope can do even more - theoretically up to 675x with the included accessories. However, with increasing magnification, the image can slowly become more and more blurred. And how big you can really see the planets, star clusters and co. depends not only on the telescope. Another important factor: the air turbulence in the atmosphere (seeing conditions). A sharp image with good contrast - this is what the starter telescope achieves with its large focal ratio of about 1 to 12.9 (F/12.9), which is calculated from the ratio of the 70 mm aperture to the 900 mm focal length. And you will see: Due to the long focal length, especially the Sun, Moon, planets, open star clusters and globular clusters become absolute eye-catchers. Solid base for your stargazing hours - mount and tripod Found the ideal location for your nocturnal explorations? Then attach the telescope tube to the height-adjustable aluminium tripod with azimuthal mount. And this azimuthal mount is particularly compelling due to one quality: operation is really child's play. Simply swing the telescope by hand to the left or right, up or down, as with a common photo tripod. This way you can quickly move your gaze from one celestial highlight to the next. And where are the accessories? Simply place them on the storage plate between the tripod legs. This way, eyepieces, solar filter and co. stay always within reach. All the trimmings - the accessories The beginner’s telescope comes with everything you need for a quick start in stargazing. When searching for celestial bodies worth seeing, take your first look through the included LED viewfinder. Because the direction finder helps you to align the telescope precisely and find astronomical objects. It works like this: The LED finder is mounted in parallel on the telescope tube. It projects a red dot onto a small ground-glass screen that appears to float in front of the sky when you look through it. And that is exactly where the aperture of your telescope points. This way, you can always keep an overview of the night sky - before focusing your attention on the details through the magnification of the telescope. And you decide how high this magnification is by choosing the eyepiece. You will be amazed: the two eyepieces included in the set (4 mm, 20 mm) allow you to admire completely different images of the same object. If you one day want a change of perspective, you can expand your astronomy set with a large selection of eyepieces. For this purpose, the socket diameter is 1.25 inches (31.7 mm), which corresponds to an international, manufacturer-independent standard. You like what you see, but would love more detail? Then simply insert the 3x Barlow lens between the telescope and the eyepiece. And you have tripled the magnification of the eyepiece! Observation comfort and a pleasant view - this is what the 90-degree star diagonal mirror is made for. Even if your starter telescope is pointed vertically into the sky, you don't need to lie down underneath it to see anything. Instead, simply look in comfortably from the side and enjoy the view. But it's not only at night that we should look skywards. For only during the day you can see a very special star: our Sun. So put the solar filter in front of the lens and safely look at sunspots and granulation on the Sun. CAUTION: Never point the telescope at the Sun without the solar filter! Would you like to share your discoveries with friends and family? Then take your first steps in astrophotography right away - and those are done in no time with the smartphone camera adapter for your beginner's telescope. The Moon, Sun, planets, open star clusters and globular clusters always make a good picture. Discover what our night sky has to offer with the BRESSER Sirius 70/900 AZ refracting telescope. FEATURES Beginner’s telescope for astronomy 70 mm aperture; 900 mm focal length Achromatic refractor type Fraunhofer Ideal for observing the Sun, Moon, planets and star clusters Height-adjustable tripod with azimuthal mount Easy to use, also very suitable for children Focal ratio F/12.9, therefore very sharp image and high contrast Two eyepieces and one Barlow lens with 31.7 mm (1.25 inch) sockets for different magnifications Safe solar observation with the included solar filter Entry into astrophotography with smartphone camera adapter SCOPE OF DELIVERY Starter lens telescope Aluminium tripod Azimuthal mount Eyepieces: 4 mm and 20 mm (1.25 inch socket) Barlow lens 3x (1.25 inch socket) Star diagonal mirror LED illuminated dot finder Solar filter Smartphone camera adapter Accessory tray Astronomy software via download Instruction manual

The Bresser BR-LS210C Carbon Lightstand is a very compact and lightweight stand that can be used in a variety of situations. This light stand is perfect for creators who are frequently on the go and prefer lighter gear. It is also ideal for both seasoned and beginner photographers and videographers with a studio. The stand will also be very popular with nature and location photographers. Made from carbon fiber, it weighs only 670 grams. The load capacity is 2 kg, allowing you to mount small LED lights, cameras, or flashes. With a folded length of only 47 cm, the Bresser BR-LS210C Carbon Lightstand is suitable for carry-on luggage and ideal for those with very limited storage or carrying space. The stand even fits neatly into the tripod pocket on the side of most camera bags or backpacks. The individual sections are secured with Quick Release Twist Locks, allowing you to quickly adjust the height. The stand's height can be set from 47 to 210 centimeters using the screw lock. The head of the stand features a fixed standard spigot adapter with a 1/4"-20 connection. FEATURES Compact and lightweight light stand Carbon fiber construction Quick Release Twist Locks 5 sections Tube diameter: 13, 16, 19, 22, and 25mm Weighs only 670 grams Minimum height: 50 cm Maximum height: 210 cm Load capacity: 2 kg Spigot adapter with 1/4" connection SCOPE OF DELIVERY Bresser BR-LS210C Carbon Lightstand

One tripod - many possibilities.This strong and stable aluminium lamp tripod is the perfect assistant in the photo studio. It can be used as a lamp tripod for studio flashes or LED lamps, or as a reflector and diffuser holder. The BRESSER BR-RH 400 offers a high degree of stability and can still be folded quickly for use on location.PROPERTIESAluminium lamp tripodMax. Tripod height: 200 cm of 2 sections (30 mm/ 25 mm) Length of swivel arm of 2 sections  (25 mm/ 20 mm)Folded height: 120 cmMax. tube diameter: 30 mmDiameter of stand: 110 cmWeight: 3.1 kgSCOPE OF DELIVERYLamp tripodReflector holderSpigot

BRESSER BR-BS310 PRO Background System 300 x 310 cm – The ideal choice for heavy studio backdrops Professional stability for your studio The BRESSER BR-BS310 PRO Background System is the perfect solution for photographers and videographers working with heavy background rolls. Thanks to the extra-strong, telescopic crossbar made of aluminium, this system offers maximum stability and strength, even with wide and heavy backdrops. Where other systems bend, the BRESSER BR-BS310 PRO remains solid and upright. Why choose the BRESSER BR-BS310 PRO? With this professional background system, you are guaranteed stability, quality, and flexibility. Ideal for professional studio photography, portrait shoots, video productions, and commercial photography. Whether you work with paper, vinyl, or fabric backdrops — the BRESSER BR-BS310 PRO keeps everything securely in place. High-quality construction and flexible design The BR-BS310 PRO Background Support is designed with attention to detail and durability. The two heavy-duty aluminium stands feature a unique clamping system that allows you to continuously adjust the height up to 310 cm. The crossbar is adjustable from 117 to 300 cm, making this system suitable for any studio setup. Thanks to its innovative folding mechanism, the BRESSER BR-BS310 PRO is easy to store and transport. Despite its robust construction, the system weighs only 5.9 kg and comes with a convenient carrying bag. Versatile and professional The included light stands can also be used separately for lamps, flashes, or softboxes thanks to the universal spigot adapter. The CNC-machined components ensure a professional finish and long-lasting performance. FEATURES Solid aluminium background system Suitable for heavy and wide background rolls Telescopic crossbar with a diameter of 35–29 mm prevents bending Adjustable width from 117 – 300 cm Height-adjustable stands from 98.5 – 310 cm Air cushioning for extra safety 4 sections with stable clamping system Universal spigot adapter Total weight only 5.9 kg Compact and easy to transport IN THE BOX 2x Bresser BR-LS310 PRO stand 1x Bresser BR-BS310 PRO telescopic crossbar 1x Luxury carrying bag