BRESSER BR-16 Universal Clamp + Spigot Adapter

The robust BRESSER BR-23 gooseneck can be quickly and easily mounted anywhere on tables or boards. LED lights, panel lights, light photo studio flashes and various daylight lights can be mounted on the screwed-in spigot connection with a 1/4" screw thread. In addition, mini LED lights etc. can also be screwed on. The flexible part of the gooseneck has a length of 44 cm and has a load capacity of approx. 1 - 2 kg, taking into account the angle of inclination. With its total length of 60 cm, the practical BRESSER BR-23 gooseneck can be stored quickly and space-saving in the photo studio equipment.Note: The load capacity of approx. 1-2 kg depends on the tilt angle and may therefore vary.PROPERTIESFlexible, bendable arm: 43 cm/ Ø 15 mmRubberised spring clamp with strong spring1/4" spigot adapterClamp opening: max. 55 mmClamp width: 80 mmLoad capacity: 1- 2 kgSCOPE OF DELIVERY1x Flex arm1x Spigot 2,5 cm

The TR-1 5 in 1 collapsible reflector consists of a flexible frame covered with a white diffuse cloth. The diffuser can be transformed into a versatile reflector by means of a removable and reversible slipcover with different reflective foils (black, gold, silver and white) on its four sides. It will allow you to create beautiful and creative effects on your pictures.The collapsible reflector can be folded to compact dimensions, so you can easily take it with you. FEATUREScollapsible reflectordiffuser and 4 reflective foils (black, gold, silver and white)versatilealso ideal for on locationSCOPE OF DELIVERYcollapsible reflector/diffuserreversible zippered slipcover with 4 reflective foilstransport cover

The 121 cm long swivel arm with two hinges consists of two solid metal bars, each of which is 60.5 cm long.You can therefore choose to use only the front bar, which is equipped with a spigot adapter with a 1/4” external thread and one hinge.The swivel arm can be secured to a lamp stand with a spigot adapter and used as an extension or a boom arm. Thanks to the multi clamp that can support loads of up to 12 kg, it can also be secured to tabletops, shelves and pipes with a diameter of 2-10 cm.FEATURES OF SWIVEL ARMTwo-section swivel arm, can also be used individually2 hinges, adjustable in steps with safety latchCan be used as extension or boom arm for lamp standsSpigot adapter with 1/4” external threadSolid metal, 28 mm in diameterLoad capacity: 2.5 kgTotal length without spigot adapter 121 cmFEATURES OF MULTI CLAMPRobust metal multi clampThree 5/8” spigot adapter, one with 1/4” threaded screwMaximum load capacity: 12 kgFor attachment to poles, posts, pipes with a diameter of 2 to 10 cmDELIVERY CONTENT2-section swivel arm 1 multi clamp

With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely. When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass. With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows. FEATURES complete set for safe cleaning of camera lenses bellows for removing coarse dirt particles and fluff without scratching the lens lint-free microfibre cloth approx. 14,5x14,5cm lens cleaning pencil for safe cleaning of optical and coated glass SCOPE OF DELIVERY 1x bellows 1x lens cleaning pen 1x microfiber cloth

Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm

The robust BRESSER BR-23B gooseneck can be quickly and easily attached anywhere to tables, tubes and tripods using the tube clamp. On the screwed-in spigot connection with a 1/4" screw thread, various daylight lamps can be mounted from LED lamps, panel lamps, light photo studio flashes. In addition, mini LED lights etc. can also be screwed on. The flexible part of the gooseneck has a length of 43 cm and has a load capacity of approx. 1 - 2 kg, taking into account the angle of inclination. With its total length of 59 cm, the practical BRESSER BR-23 gooseneck can be quickly stowed away in the photo studio equipment to save space.NOTE: The load capacity of approx. 1 - 2 kg depends on the tilt angle and may therefore vary.  FEATURESFlexible bendable arm: 43 cm/ Ø 15 mm Total length: 59 cmScrew clamp opening (maximum): 35 mmScrew/ tube clamp: W: 4 cm x L: 7,5 cm x D: 6cmLoad capacity: max 1 - 2 kg, depending on angle of inclination SCOPE OF DELIVERY FlexarmSpigot adapter (1/4'' male / 3/8'' male)