BRESSER BR-20 Gooseneck with clamps
Stable gooseneck with versatile use photo studio and leisure area and two mounting clamps
- Suitable for mounting on tables and shelves or also lamp tripods
- Robust and flexible arm for perfect positioning and alignment
- Clamp opening: maximum 50 mm, load capacity: up to 1 kg (depending on the angle of inclination)
- Dimension: Total; 64 cm/ Weight: 526g
- Scope of delivery: 1x Bresser BR-20 Flexarm/ Gooseneck
€16.00*
Currently not available
Expected to be available again from 20 Jul 2025.
Product number:
F001675
EAN:
4007922030258
WEEE-Reg.-Nr.:
DE 34323861
Bresser Photo Studio Equipment
With Bresser's photo studio equipment, you can create your own studio and bring your creative ideas to life. The range offers everything you need for a professional studio setup: a selection of backgrounds for various uses, studio flashes and continuous lights for optimal lighting, as well as tripods and versatile camera accessories. Whether you're planning product photos, portraits, or artistic shots, the combination of well-thought-out accessories and light control gives you flexibility and control over your image composition – ideal for both beginners and professionals alike.
Discover our guides!
Product information "BRESSER BR-20 Gooseneck with clamps"
Whether in the photo or film studio, for camping or leisure activities, the BRESSER BR-20 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two sturdy spring clamps, the flexible arm is quickly and flexibly attached to table tops or tripods.
The flexible part measures 43 cm in length and with a total length of 64 cm, the gooseneck can be quickly stowed away to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER BR-20 Gooseneck will not hold. The rubberized spring clips with a width of 7,5 cm and an opening of up 5 cm can also be attached to tubes and rods, microphone stands and lamp tripods.
NOTE: The load capacity of up to 1 kg depends on the angle of inclination and may therefore vary.
PROPERTIES
SCOPE OF DELIVERY
The flexible part measures 43 cm in length and with a total length of 64 cm, the gooseneck can be quickly stowed away to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER BR-20 Gooseneck will not hold. The rubberized spring clips with a width of 7,5 cm and an opening of up 5 cm can also be attached to tubes and rods, microphone stands and lamp tripods.
NOTE: The load capacity of up to 1 kg depends on the angle of inclination and may therefore vary.
PROPERTIES
- Flexible bendable arm: 43 cm/ Ø 15 mm
- Total length: 64 cm
- Removable rubber lips
- Spring clamp opening: max. 5,5 cm
- Clamp width: 75 mm
- Load capacity: max. 1 Kg, dependig on angle of inclination
SCOPE OF DELIVERY
- 1x BRESSER BR-20 Flex Arm
| Batteries required: | No |
|---|---|
| Colour: | black |
| Material: | Aluminium |
| Net Weight total (incl. accessories) (g): | 526 |
| Total length (mm): | 640 |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Follow instructions! Always read and follow the instructions before use.
- Avoid falling hazards! Ensure secure placement.
- Avoid moisture and heat! Rain, high humidity, and extreme temperatures can damage the product.
- Maintain a safe distance! Lamps and flashes can become hot – keep them away from flammable materials.
- Risk of tripping! Position cables so they do not create obstacles or become damaged.
- Safe use of batteries! Use only suitable batteries and avoid overcharging.
- Safe transport! Protect accessories in bags or cases.
- Secure attachment! Check that all parts are securely fastened.
- Electrical hazard! Switch off the device before cleaning or making adjustments.
- Safe use! Only use the product as described to ensure safety and functionality.
Customers also bought
BRESSER BR-21 Gooseneck with table clamp/ tube clamp and spring clamp
€18.00*
Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm
BRESSER BR-23 Gooseneck with tube clamp and Spigot
€14.95*
The robust BRESSER BR-23B gooseneck can be quickly and easily attached anywhere to tables, tubes and tripods using the tube clamp. On the screwed-in spigot connection with a 1/4" screw thread, various daylight lamps can be mounted from LED lamps, panel lamps, light photo studio flashes. In addition, mini LED lights etc. can also be screwed on. The flexible part of the gooseneck has a length of 43 cm and has a load capacity of approx. 1 - 2 kg, taking into account the angle of inclination. With its total length of 59 cm, the practical BRESSER BR-23 gooseneck can be quickly stowed away in the photo studio equipment to save space.NOTE: The load capacity of approx. 1 - 2 kg depends on the tilt angle and may therefore vary.
FEATURESFlexible bendable arm: 43 cm/ Ø 15 mm
Total length: 59 cmScrew clamp opening (maximum): 35 mmScrew/ tube clamp: W: 4 cm x L: 7,5 cm x D: 6cmLoad capacity: max 1 - 2 kg, depending on angle of inclination
SCOPE OF DELIVERY
FlexarmSpigot adapter (1/4'' male / 3/8'' male)
BRESSER Set Microscope Slides
€14.90*
Slides and cover glasses are an indispensable accessory which has also impact on the image quality. For most biological microscopes, the cover glass thickness is an important optical parameter, which is therefore included in the optical design and, if so, printed on the sleeve of every objective. You can usually see the number 0.17 which is the thickness in millimeters. For demanding applications in the laboratory, or for microphotography, using cover glasses with the desired thickness and high quality is necessary.The cover glasses included in the set are made of Boro 3.3 glass and are standardized to a thickness of 0.16-0.19mm. So they match the desired 0.17mm really good and give the best possible image quality. These Boro 3.3 cover glasses are pure white, without streaks and are pre-cleaned and ready to use. They are also especially suitable for fluorescence microscopy.The slides are made of soda lime glass, and have ground edges for safe handling. They have a matte field for writing on both sides (top and bottom). Slides and cover glasses are packed separately and in a vacuum sealed bag, containing moisture absorbent. They can be stored for a long time without loss of quality from hydrolysis and are easy to take out.
Bresser Fresnel Lens Mount 2x
€69.00*
Artistic lightning highlights in photography and videography are easily possible with the Fresnel lens accessory.With the Bresser Fresnel attachment lens for various studio lamps with Bowens connection, you can conjure up a lightning effect that is often found in film and theatre.The innovative and rotatable design of the BRESSER FRESENEL lens provides an innovative user experience comparable to a camera lens. Simply place it on an LED studio light and adjust the light focus of the Fresnel lens steplessly from 12 to 40 degrees, amplifying the light output by factor 2. The modern technology made of high-quality plastics prevents stray light and also withstands high temperatures.PROPERTIESContinously adjustable light focus from 12 - 40 degreesDouble light outputNo stray lightUniform rotationCompatible with studio lights with Bowens connectorLens diameter: 150 mmTotal diameter: 185 mmSCOPE OF DELIVERY1x Bresser Fresnel lens 2x light amplification
BRESSER BR-05B Space Arm for Lightstands including Multiclamp
€79.00*
The 121 cm long swivel arm with two hinges consists of two solid metal bars, each of which is 60.5 cm long.You can therefore choose to use only the front bar, which is equipped with a spigot adapter with a 1/4” external thread and one hinge.The swivel arm can be secured to a lamp stand with a spigot adapter and used as an extension or a boom arm. Thanks to the multi clamp that can support loads of up to 12 kg, it can also be secured to tabletops, shelves and pipes with a diameter of 2-10 cm.FEATURES OF SWIVEL ARMTwo-section swivel arm, can also be used individually2 hinges, adjustable in steps with safety latchCan be used as extension or boom arm for lamp standsSpigot adapter with 1/4” external threadSolid metal, 28 mm in diameterLoad capacity: 2.5 kgTotal length without spigot adapter 121 cmFEATURES OF MULTI CLAMPRobust metal multi clampThree 5/8” spigot adapter, one with 1/4” threaded screwMaximum load capacity: 12 kgFor attachment to poles, posts, pipes with a diameter of 2 to 10 cmDELIVERY CONTENT2-section swivel arm 1 multi clamp
%
BRESSER BR-GRC Grey card 30cm
€6.82*
€17.00*
(59.88% saved)
This is a practical and flexible, foldable grey card. One side is neutral grey, the other one is white. It is used for calibration of the lighting. This way you will get images with a correct white balance.FEATURESround grey cardtwo colours: front grey, back whitediagonal: 30 cmSCOPE OF DELIVERY1 x grey card
Customers also viewed
BRESSER BR-21 Gooseneck with table clamp/ tube clamp and spring clamp
€18.00*
Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm
BRESSER BR-141 flexible Gooseneck Smartphone Holder
€7.00*
The universal BRESSER BR-141 smartphone holder is designed for devices with a width of 5 to 15 cm. The smartphone clamps into the adjustable holder and can be turned to the desired position. The strong and sturdy clamp on the other side allows the holder to be attached to a table, shelf or bar. The maximum load is 400 g.
FEATURES
Fully flexible and adjustable smartphone holder
Designed for devices with a width of 5 to 15 cm
400 g maximum load
Strong clamp for securing the holder to a table, shelf or bar
WHAT’S INCLUDED
1x smartphone holder
BRESSER BR-22 Gooseneck with clamp + Spigot
€14.00*
The robust BRESSER BR-23 gooseneck can be quickly and easily mounted anywhere on tables or boards. LED lights, panel lights, light photo studio flashes and various daylight lights can be mounted on the screwed-in spigot connection with a 1/4" screw thread. In addition, mini LED lights etc. can also be screwed on. The flexible part of the gooseneck has a length of 44 cm and has a load capacity of approx. 1 - 2 kg, taking into account the angle of inclination. With its total length of 60 cm, the practical BRESSER BR-23 gooseneck can be stored quickly and space-saving in the photo studio equipment.Note: The load capacity of approx. 1-2 kg depends on the tilt angle and may therefore vary.PROPERTIESFlexible, bendable arm: 43 cm/ Ø 15 mmRubberised spring clamp with strong spring1/4" spigot adapterClamp opening: max. 55 mmClamp width: 80 mmLoad capacity: 1- 2 kgSCOPE OF DELIVERY1x Flex arm1x Spigot 2,5 cm
BRESSER BR-23 Gooseneck with tube clamp and Spigot
€14.95*
The robust BRESSER BR-23B gooseneck can be quickly and easily attached anywhere to tables, tubes and tripods using the tube clamp. On the screwed-in spigot connection with a 1/4" screw thread, various daylight lamps can be mounted from LED lamps, panel lamps, light photo studio flashes. In addition, mini LED lights etc. can also be screwed on. The flexible part of the gooseneck has a length of 43 cm and has a load capacity of approx. 1 - 2 kg, taking into account the angle of inclination. With its total length of 59 cm, the practical BRESSER BR-23 gooseneck can be quickly stowed away in the photo studio equipment to save space.NOTE: The load capacity of approx. 1 - 2 kg depends on the tilt angle and may therefore vary.
FEATURESFlexible bendable arm: 43 cm/ Ø 15 mm
Total length: 59 cmScrew clamp opening (maximum): 35 mmScrew/ tube clamp: W: 4 cm x L: 7,5 cm x D: 6cmLoad capacity: max 1 - 2 kg, depending on angle of inclination
SCOPE OF DELIVERY
FlexarmSpigot adapter (1/4'' male / 3/8'' male)
BRESSER BR-05B Space Arm for Lightstands including Multiclamp
€79.00*
The 121 cm long swivel arm with two hinges consists of two solid metal bars, each of which is 60.5 cm long.You can therefore choose to use only the front bar, which is equipped with a spigot adapter with a 1/4” external thread and one hinge.The swivel arm can be secured to a lamp stand with a spigot adapter and used as an extension or a boom arm. Thanks to the multi clamp that can support loads of up to 12 kg, it can also be secured to tabletops, shelves and pipes with a diameter of 2-10 cm.FEATURES OF SWIVEL ARMTwo-section swivel arm, can also be used individually2 hinges, adjustable in steps with safety latchCan be used as extension or boom arm for lamp standsSpigot adapter with 1/4” external threadSolid metal, 28 mm in diameterLoad capacity: 2.5 kgTotal length without spigot adapter 121 cmFEATURES OF MULTI CLAMPRobust metal multi clampThree 5/8” spigot adapter, one with 1/4” threaded screwMaximum load capacity: 12 kgFor attachment to poles, posts, pipes with a diameter of 2 to 10 cmDELIVERY CONTENT2-section swivel arm 1 multi clamp
BRESSER BR-FA014 Gooseneck 32 cm on both Sides with 5/8'' Opening and Spigot
€19.95*
With the 32 cm long flexible arm with spigot adapter and spigot connection for mounting on lamp tripods, you get more flexibility for the alignment of photo studio accessories in a very uncomplicated way. Simply bring a ring light, LED surface light, daylight light or your camera into the right position with the stable Gooseneck, which can be loaded up to 2 kg. With the included spigot, both the 1/4" or 3/8" can be used to screw on accessories. The other side of the gooseneck is simply mounted on a lamp tripod with spigot.PROPERTIES
Very sturdy gooseneckTotal length: 32 cmLoad capacity: 2 kgBoth ends and sides with 5/8" openingsIncludes 1/4" and 3/8" spigot adapters (6,5 cm long without thread)SCOPE OF DELIVERY1x Gooseneck1x Spigot adapter (1/4" male, 3/8" male)
BRESSER MB-15 SET Wall/Ceiling Mount for 1 Background Roll
€9.95*
The practical BRESSER MB-15 Backdrop System for ceiling or wall mounting is a space-saving solution for mounting a vinyl or paper photo studio backdrop roll together with the Expan System from BRESSER MB series. A tube or rod with a maximum diameter of 1,9 cm can also be hooked in to use a BRESSER fabric backdrop with loop.FEATURESStrong mount for one background rollSuitable for walls and ceilingsOpening for tubes with a diameter up to 1,9 cmDimensions mounting plate: 12 x 4.9 cmLength bracket: 13 cmSCOPE OF DELIVERY2x wall mounts
