BRESSER BR-21 Gooseneck with table clamp/ tube clamp and spring clamp

When there is no assistant around to hold the collapsible reflector for you during a photo shoot the BRESSER BR-6 clamp support offers the optimal solution. The metal clamp with a strong spring safely holds even larger reflectors. Thereby, the rubber lips protect the reflectors against any damages. This clamp is attached onto a tilt head, so you can position the reflector flexibly for an ideal illumination.The support clamp is equipped with a removable adapter with two different threads so it can be put onto any lightstand.FEATURESmetal clamp to attach collapsible reflectors to lightstandstilt headopening for studio umbrellasexchangeable tripod connectionSCOPE OF DELIVERYsupport clampspigot adapter (1/4" female, 3/8" female)

Whether in the photo or film studio, for camping or leisure activities, the BRESSER BR-20 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two sturdy spring clamps, the flexible arm is quickly and flexibly attached to table tops or tripods.The flexible part measures 43 cm in length and with a total length of 64 cm, the gooseneck can be quickly stowed away to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER BR-20 Gooseneck will not hold. The rubberized spring clips with a width of 7,5 cm and an opening of up 5 cm can also be attached to tubes and rods, microphone stands and lamp tripods.NOTE: The load capacity of up to 1 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm: 43 cm/  Ø 15 mmTotal length: 64 cmRemovable rubber lipsSpring clamp opening: max. 5,5 cmClamp width: 75 mmLoad capacity: max. 1 Kg, dependig on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-20 Flex Arm

The robust BRESSER BR-23 gooseneck can be quickly and easily mounted anywhere on tables or boards. LED lights, panel lights, light photo studio flashes and various daylight lights can be mounted on the screwed-in spigot connection with a 1/4" screw thread. In addition, mini LED lights etc. can also be screwed on. The flexible part of the gooseneck has a length of 44 cm and has a load capacity of approx. 1 - 2 kg, taking into account the angle of inclination. With its total length of 60 cm, the practical BRESSER BR-23 gooseneck can be stored quickly and space-saving in the photo studio equipment.Note: The load capacity of approx. 1-2 kg depends on the tilt angle and may therefore vary.PROPERTIESFlexible, bendable arm: 43 cm/ Ø 15 mmRubberised spring clamp with strong spring1/4" spigot adapterClamp opening: max. 55 mmClamp width: 80 mmLoad capacity: 1- 2 kgSCOPE OF DELIVERY1x Flex arm1x Spigot 2,5 cm

The robust BRESSER BR-23B gooseneck can be quickly and easily attached anywhere to tables, tubes and tripods using the tube clamp. On the screwed-in spigot connection with a 1/4" screw thread, various daylight lamps can be mounted from LED lamps, panel lamps, light photo studio flashes. In addition, mini LED lights etc. can also be screwed on. The flexible part of the gooseneck has a length of 43 cm and has a load capacity of approx. 1 - 2 kg, taking into account the angle of inclination. With its total length of 59 cm, the practical BRESSER BR-23 gooseneck can be quickly stowed away in the photo studio equipment to save space.NOTE: The load capacity of approx. 1 - 2 kg depends on the tilt angle and may therefore vary.  FEATURESFlexible bendable arm: 43 cm/ Ø 15 mm Total length: 59 cmScrew clamp opening (maximum): 35 mmScrew/ tube clamp: W: 4 cm x L: 7,5 cm x D: 6cmLoad capacity: max 1 - 2 kg, depending on angle of inclination SCOPE OF DELIVERY FlexarmSpigot adapter (1/4'' male / 3/8'' male)

A masterpiece of COB LED studio light technology, the BRESSER BR-D3500SL daylight lamp will inspire every professional in the field of film and video recording.It convinces in a compact and robust design with a fabulous output of 350 W. In addition, the separation of power supply unit, control panel and housing has made it possible to design a cooling system that is virtually noiseless even at maximum output. And this with increased stability and simplified control options.The monobloc luminaire with a colour temperature of a convincing 5600 K can be easily adjusted from 10 to 100% at the control unit or via the remote control supplied. With a colour index of CRI 96+, a natural light atmosphere is created.Hollywood effects desired?Then the absolute highlight of the BRESSER BR-D3500SL COB LED light are the 5 pre-programmed and dimmable light effects. They can be selected simply by pressing a button: Paparazzi, Fireworks, Warning, Thunder and TV. These effects provide that certain something for video recordings and also at events.And if it should be a photo shoot: no problem!The S-bayonet connection leaves all possibilities open. Various light shapers can be used, or reflective or translucent umbrellas can be inserted into practical U-bracket.With optionally available rechargeable batteries, the separate control box can be used for power supply indoors or on location to avoid cable clutter and problems caused by power failures. There are 2 V-lock connections for this purpose. All operating parameters can be easily checked on the disply of the control box. On top of that, the 2.4 GHz remote control with 99 programmable channels can be used to control all settings of the LED daylight luminaire even from a distance of up to 30 m.PROPERTIESCOB LED monobloc350 W power31500 lumensHigh CRI of 96+High qulita aluminium housingLow noise cooling2 x V-Lock connectiors2.4 GHz remote control5 light effectsS-bayonet connectionSCOPE OF DELIVERY1x BRESSER BR-D3500SL COB LED1x Protective cap1x Control unit1x Mains cable1x Connection cable1x Standard 65° reflector1x Remote control1x Transport bag with carrying strap

A practical, universal plastic clamp with a very strong spring to clamp background paper, background cloth or collapsible reflectors to a bar or a tube. With this clamp you can for instance prevent a background roll from unrolling. The clamps are provided with a movable top. This provides a stable fixation and uniform pressure on the object to be fastened.NOTE!These clamps are attached to the side of the background roll, the core of the roll and the crossbar of the background system (NOT onto the background roll itself)FEATURESplastic background clampmovable toplength: +/- 16.5 cmopening: +/- 6.5 cm weight: 100 gSCOPE OF DELIVERY6x background clamp