BRESSER BR-2205-N1 Carbon Photo Tripod up to 8 kg also usable as Ground Level Tripod

The BRESSER BR-2504X8C-B1 is a versatile and reliable camera stand for use in a wide range of scenarios. Made from 100% carbon fibre, these camera stands are extremely stable and offer additional stiffness and a very low total weight. The stand comes with two centre columns. The small centre column has a length of 9.5 cm, and gives the stand a minimum height of 25 cm when the ball head is used. The large centre column has a length of 33 cm, and enables the stand to reach a maximum height of 165 cm when the ball head is used. The bottom end of the centre columns features a spring-loaded hook for securing a counterweight for additional stability. The legs can be adjusted individually in three different positions. One leg can be removed and used as a monopod by attaching the ball head onto the leg. This stand comes with a full aluminium BRESSER B-1 ball head, which rotates 360 degrees and can be tilted to any angle, including the standing position. The Arca Swiss-compatible quick release plate can be attached to a camera or a viewer in order to ensure a secure connection to the B-1 ball head. A rotatable ring is attached to the base of the ball head, and allows the camera to swivel without the observer while maintaining the same height and level, making it ideal for panorama photography. FEATURES Full carbon tripod Aluminium ball head Maximum load of 10 kg Minimum height of 25 cm Maximum height of 165 cm Height when folded: 47 cm Weight of stand and head: 1450 grams Twist-lock system Convertible to monopod Interchangeable centre columns Long full carbon centre column Short aluminium centre column Arca Swiss quick release plate Hook for counterweight on long centre column 360-degree rotatable and tiltable ball head Double spirit level on ball headDegree markings for panorama shotsThreaded screw quick-release plate 1/4" WHAT’S INCLUDEDCamera stand Ball head Quick release plate Long centre column Short centre column Hex key Storage bag for tripod head Tripod bag with shoulder strap Instructions

The BRESSER BX-10 Pro Tripod with Fluid Pan-and-Tilt Head is a very versatile tripod that is height and angle adjustable. The ball head has a load capacity of 12 kg. This makes the tripod extremely flexible and one can work with different camera models, binoculars, spotting scopes and astronomy binoculars. The non-slip rubber feet are ideal for grip on smooth surfaces indoors, but also offer extremely good grip on muddy, sandy and uneven surfaces outdoors. This all-round tripod by BRESSER features aluminium alloy tripod legs and a fluid head with a 70 mm diameter base. The four-piece legs are locked with a quick-lock swivel system. The base of the ball head is equipped with a 3/8" mounting thread. For panning and tilting the ball head, the supplied handle is used. This handle can be mounted on the left or right side. Also, the handle can be adjusted in length with a minimum length of 26 cm and a maximum length of 35 cm. The desired length can be fixed with the handle extension lock. The folded tripod has a height of 82 cm and can be extended to a height of 184 cm. If you also extend the centre column, you reach a maximum height of 216 cm. The minimum working height of the tripod is 78 cm. If you spread the legs to their maximum, the minimum working height is 62 cm. The tripod head allows 360-degree swivels and tilts from +90 to -70 degrees. The quick release plate is universal and features a standard tripod connection (1/4" screw) and a 3/8" screw that allows you to easily mount any camera, binocular adapter, spotting scope or astronomy binocular on the tripod head. Thanks to the built-in level, you can also see if your tripod is level. The unused screw can be turned into the appropriate compartment on the tripod head so that it does not get lost and is always at hand. The quick release plate is secured by a safety device. The tripod with fluid head weighs 3,786 grams. The center column has a hook that helps to ensure stability. For example, use a sandbag, water bag, backpack and even rocks in a bag to improve balance. A carrying bag is included for easy storage and transportation. FEATURES Very sturdy all-in-one tripod High quality construction Fluid Pan-and-Tilt Head Folded length: 82 cm Minimum working height: 78 cm (tripod legs normally spread) Minimum working height: 62 cm (tripod legs spread to the maximum) Maximum working height: 216 cm Tripod load capacity (as a set): 10-12 kg Load capacity ball head: 10-12 kg Tripod load capacity: 20 kg Tripod and ball head weight: 3,786 grams Level Height adjustable central column Hook for counterweight 1/4" and 3/8" connection Carrying bag SCOPE OF DELIVERY BRESSER BX-10 Pro Tripod BRESSER BX-10 Pro Fluid Pan-and-Tilt Head Fluid Pan-and-Tilt Head handle Quick Release Plate 50 x 92 mm 1/4" screw 3/8" screw Carrying bag with pocket

he BRESSER TR-688V is a solid video tripod at a small price! The three tripod legs can be individually adjusted in length thanks to the practical quick-release buckles. The rubber feet can be angled as required. So you can find stable stand even on slopes and on uneven ground. Ideal for photographing outdoors! 360 ° shots are not a problem with the 2-way tilt. With the help of the handgrip, the tripod head can be rotated 360 ° smoothly. In addition, the camera can be tilted up to 90 ° over two axes. An integrated water scale and canister bubble ensure the required precision. Want to quickly switch between cameras with different lenses and settings? With the quick-release plate is no problem! FEATURES especially lightweight and transportable suitable for cameras and spotting scopes up to a total weight of 3 kg infinitely height adjustable from 63.5 cm to 171 cm 2-way tilt with quick-release plate 1/4 "photo screw two integrated circular levels individually adjustable tripod legs for uneven terrain by hand crank extendable column Hook for attachment of a counterweight for more stability SCOPE OF DELIVERY Video tripod with 2-way tilt Quick release plate Tripod bag with shoulder strap

The models of the Traveler series by BRESSER are lightweight tripods, which can also be taken on long hikes and trekking trips. They are equipped with quick-release fasteners on the tripod legs as well as a multifunctional 3-way panoramic head with quick-change plate and water balance. The height can be precisely adjusted using the hand crank on the center axis. For a better carrying comfort there is a handle and on the lower side of the middle axle there is a hook for fastening a counterweight. Suitable for photo and video cameras as well as for lighter spectroscopy. FEATURESSegments: 3Max. Diameter: Ø23mm to Ø30mmMax. Height: 180cmFolded: 71cmWeight: 1660gMax. Load: 2.7-5kg SCOPE OF DELIVERYtripodquick-release platebag

The BRESSER VT-01 Tripod is a robust video and camera tripod with a professional fluid tilt head and the perfect companion in the video studio or the photo studio. The aluminium video tripod is particularly stable thanks to the central spider. Due to the twist locks, the height of the tripod legs can be changed quickly, and the video tripod can be perfectly aligned by using the built-in spirit level.With a maximum load of up to 12 kg, the BRESSER VT-01 tripod is suitable for professional video cameras, SLR cameras, system cameras, spotting scopes and binoculars.(Adapter not included) The video head can be turned smoothly via pan-drag control and without jerking. The extra-large quick-release plate and the safety button ensure that the camera is held in place safely. The tripod's quick-release plate has two additional, handy 1/4" - 20 and 3/8" - 16 connections. The video head of the BRESSER VT-01 tripod offers full control with 360° pan and 90°/-70° tilt options. The rubberised hand lever can be conveniently mounted to the left or right of the camera tripod. The high-quality, padded tripod bag with handles has a small zipped inner pocket for small accessories, and the additional shoulder strap can also be easily removed if desired.FEATURESProfessional aluminium video tripodIdeal video tripod for digital cameras and camcordersVideo head with versatile tilt and swivel rangeBuilt-in spirit levelTube thickness of tripod legs 18 mm and 14 mmQuick-release plate with 1/4" - 20 and 3/8" - 16 connectionsReplaceable handle with angle adjustmentHeight adjustable from 85 to 185 cmWeight: 4,3 kgIncreased stability due to central spiderRubberised and movable feetFluid head with 360° swivel functionFluid head with - 70° to + 90° tilt rangeSCOPE OF DELIVERY1x BRESSER VT-01 professional tripod1x Fluid damped video head1x Rubberised handle1x 1/4" - 20 and 3/8" - 16 grub screw1x Tripod bag1x Shoulder strap

The BRESSER Traveler photo tripods are sturdy lightweights for outdoor use! Landscape photographers will appreciate the advantages of these tripods just as much as nature observers. The three tripod legs can be adjusted individually in length thanks to the practical quick lock. The rubber feet can be angled as needed. Thus, you'll get a stable stand even at slopes and on uneven ground. Ideal for photo shoots in the great outdoors!360° images are no problem with the 3-way tilt head. By means of the handle it can be rotated smoothly and jerk-free 360°. Additionally the camera can be tilted up to 90° over two axis. A built-in bubble level and circular bubble level provide for the necessary precision. You want to change quickly between cameras with different objective lenses? With the quick release plate this is no problem!FEATURESparticularly lightweight and transportable photo tripodsuitable for cameras and spotting scopes up to a total weight of 5kgcontinuously height adjustable from 62 cm to 170 cm3-way pan head with quick release plate1/4" photo screwintegrated bubble level and circular bubble levelindividually adjustable tripod legs for uneven groundshand crank for central columnhook for attachment of counterweight sandbags for more stabilitySCOPE OF DELIVERYPhoto tripod with 3-way headQuick release plateTripod bag with shoulder strap

Thanks to fully multi coated Bak-4 glass material and the extra large objective lens diameter the BRESSER Spezial-Astro 20x80 Porro Binoculars provide bright, crisp images from edge to edge. Their high 20x magnification makes these excellent binoculars convenient not only for observing astronomical objects, but are also practical for viewing distant terrestrial targets and nature study. Their optical design and coatings minimise stray light and ghosting (even near brighter objects like the Moon), which would otherwise disrupt and detract from observing enjoyment.Diopter compensation and foldable rubber eyecups give wearers of glasses the possibility of making the best use of these binocular's wide field of view. With the tripod thread integrated in the strong central support column, which is adjustable along the centre axis bar, the BRESSER Spezial-Astro 20x80 Porro Binoculars can directly be mounted onto any suitable camera-style tripod and balanced front to back, once in place.FEATURESBinoculars for astronomical and long distance observationsExtremely high light gathering capacityCan directly be mounted onto tripods with standard 1/4" attachmentsWHAT'S INCLUDEDBinocularsCarry case