BRESSER BR-2238 Daylight Set 1250W
- Daylight set for universal permanent lighting
- For product and video photography, spigot adapter: 1/4'' and 3/8''
- Soft and even illumination through the softboxes
- Softboxes approx. 50 x 70 cm, tripod: 88 - 210 cm
- Scope of delivery: 2x Softbox, 2x tripod, 2x 125 W lamp, bag
Currently not available
Product number:
F001912
EAN:
4007922031958
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER BR-2238 Daylight Set 1250W"
SCOPE OF DELIVERY
- 2x softbox 50X70cm E27
- 2x light stand 2.1M
- 2x daylight bulb 5500K 125W
- 1x carrying bag
| Batteries included: | No |
|---|---|
| Flash counter: | No |
| Flash lamp: | No |
| Illuminant: | Fluorescent lamp |
| LED modelling lamp: | No |
| Lamp included: | No |
| Metal reflector: | No |
| Overheat protection: | No |
| Photo cell: | No |
| Protection cap: | No |
| Synchro flash cord included: | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Risk of overheating! Ensure adequate air circulation.
- Avoid moisture! Do not use the device in damp or wet environments.
- Risk of burns! Lamps can become hot allow them to cool fully before replacing.
- Electrical safety! Use only the recommended power source and regularly check cables for damage.
- Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
- Fire hazard! Keep flammable materials away from lighting.
- Eye protection! Do not look directly into the lamp to avoid eye damage.
- Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
- Store dust-free! Keep in a dry and clean place.
- Follow intended use! Use the device only for its designated purpose and according to the instructions.
- Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
- Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
- Safe transport! Pack the product carefully to minimise damage during transit.
- Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.
Skip product gallery
Accessories
BRESSER BR-BLS210 Boom Tripod with Arm
€85.00*
With the BRESSER BR-BLS210 Boom Stand including telescopic extension arm, it is easy to set up headlights and overhead lights in the photo or video studio in a space-saving manner, whether with studio flashes or daylight lamps. The sturdy aluminium lamp tripod is easy to handle and folds compactly. There is an air suspension system in the tripod that absorbs any shocks when lowered. With the angle adjustment, the boom arm can be placed at the desired height and angle in no time. Not only photo studio flashes, daylight or LED panel lights can be attached to the spigot connection, but also cameras can be attached to the thread. The counterweight bag can be weighted with sand or beverage bottles and provides the appropriate stability with a maximum load capacity of up to 4 kg.FEATURESStable aluminium boom standNon reflective, black powder coatingAir cushionTelescopic boom armSpigot adapter for attachment of flashes or lampsStand height: 138 - 210 cmBoom arm length: 108 - 200 cmFolded height: 120 cmLoad capacity up to 4 kgSCOPE OF DELIVERY1x Boom stand1x Boom arm1x Counterweight sandbag1x Spigot adapter (1/4" male, 3/8" male)
Available
