BRESSER BR-23 Gooseneck with tube clamp and Spigot

Stable gooseneck with versatile use for mounting studio lights with spigot adapter

  • Suitable for mounting on tables and tubes, or also lamp tripods
  • Robust and flexible arm for perfect positioning and alignment
  • Rubberised tube clamp with max opening of 3,5 cm and spigot adapter with 1/4" thread
  • Total length: 59 cm/ load capacity: 1 - 2 kg (depending on angle of inclination) Weight: 543 g
  • Incl: 1x Bresser BR-21 Flexarm/ Gooseneck

€9.00*

% €14.95* (39.8% saved)

Available, delivery time: 2-4 days

Product number: F001991
EAN: 4007922033327
WEEE-Reg.-Nr.: DE 34323861

Bresser Photo Studio Equipment

With Bresser's photo studio equipment, you can create your own studio and bring your creative ideas to life. The range offers everything you need for a professional studio setup: a selection of backgrounds for various uses, studio flashes and continuous lights for optimal lighting, as well as tripods and versatile camera accessories. Whether you're planning product photos, portraits, or artistic shots, the combination of well-thought-out accessories and light control gives you flexibility and control over your image composition – ideal for both beginners and professionals alike.

Product information "BRESSER BR-23 Gooseneck with tube clamp and Spigot"
The robust BRESSER BR-23B gooseneck can be quickly and easily attached anywhere to tables, tubes and tripods using the tube clamp. On the screwed-in spigot connection with a 1/4" screw thread, various daylight lamps can be mounted from LED lamps, panel lamps, light photo studio flashes. In addition, mini LED lights etc. can also be screwed on. The flexible part of the gooseneck has a length of 43 cm and has a load capacity of approx. 1 - 2 kg, taking into account the angle of inclination. With its total length of 59 cm, the practical BRESSER BR-23 gooseneck can be quickly stowed away in the photo studio equipment to save space.


NOTE: The load capacity of approx. 1 - 2 kg depends on the tilt angle and may therefore vary.

 

FEATURES

  • Flexible bendable arm: 43 cm/ Ø 15 mm
  • Total length: 59 cm
  • Screw clamp opening (maximum): 35 mm
  • Screw/ tube clamp: W: 4 cm x L: 7,5 cm x D: 6cm
  • Load capacity: max 1 - 2 kg, depending on angle of inclination


SCOPE OF DELIVERY
  • Flexarm
  • Spigot adapter (1/4'' male / 3/8'' male)
Batteries required: No
Colour: black
Material: Aluminium

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • Follow instructions! Always read and follow the instructions before use.
  • Avoid falling hazards! Ensure secure placement.
  • Avoid moisture and heat! Rain, high humidity, and extreme temperatures can damage the product.
  • Maintain a safe distance! Lamps and flashes can become hot – keep them away from flammable materials.
  • Risk of tripping! Position cables so they do not create obstacles or become damaged.
  • Safe use of batteries! Use only suitable batteries and avoid overcharging.
  • Safe transport! Protect accessories in bags or cases.
  • Secure attachment! Check that all parts are securely fastened.
  • Electrical hazard! Switch off the device before cleaning or making adjustments.
  • Safe use! Only use the product as described to ensure safety and functionality.

Customers also bought

%
BRESSER BR-22 Gooseneck with clamp + Spigot
The robust BRESSER BR-23 gooseneck can be quickly and easily mounted anywhere on tables or boards. LED lights, panel lights, light photo studio flashes and various daylight lights can be mounted on the screwed-in spigot connection with a 1/4" screw thread. In addition, mini LED lights etc. can also be screwed on. The flexible part of the gooseneck has a length of 44 cm and has a load capacity of approx. 1 - 2 kg, taking into account the angle of inclination. With its total length of 60 cm, the practical BRESSER BR-23 gooseneck can be stored quickly and space-saving in the photo studio equipment.Note: The load capacity of approx. 1-2 kg depends on the tilt angle and may therefore vary.PROPERTIESFlexible, bendable arm: 43 cm/ Ø 15 mmRubberised spring clamp with strong spring1/4" spigot adapterClamp opening: max. 55 mmClamp width: 80 mmLoad capacity: 1- 2 kgSCOPE OF DELIVERY1x Flex arm1x Spigot 2,5 cm

€8.00* €14.00* (42.86% saved)
BRESSER BR-20 Gooseneck with clamps
Whether in the photo or film studio, for camping or leisure activities, the BRESSER BR-20 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two sturdy spring clamps, the flexible arm is quickly and flexibly attached to table tops or tripods.The flexible part measures 43 cm in length and with a total length of 64 cm, the gooseneck can be quickly stowed away to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER BR-20 Gooseneck will not hold. The rubberized spring clips with a width of 7,5 cm and an opening of up 5 cm can also be attached to tubes and rods, microphone stands and lamp tripods.NOTE: The load capacity of up to 1 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm: 43 cm/  Ø 15 mmTotal length: 64 cmRemovable rubber lipsSpring clamp opening: max. 5,5 cmClamp width: 75 mmLoad capacity: max. 1 Kg, dependig on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-20 Flex Arm

€16.00*
BRESSER BR-21 Gooseneck with table clamp/ tube clamp and spring clamp
Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm

€18.00*
BRESSER BR-6 tiltable Support Clamp for collapsible Reflectors and Backgrounds
When there is no assistant around to hold the collapsible reflector for you during a photo shoot the BRESSER BR-6 clamp support offers the optimal solution. The metal clamp with a strong spring safely holds even larger reflectors. Thereby, the rubber lips protect the reflectors against any damages. This clamp is attached onto a tilt head, so you can position the reflector flexibly for an ideal illumination.The support clamp is equipped with a removable adapter with two different threads so it can be put onto any lightstand.FEATURESmetal clamp to attach collapsible reflectors to lightstandstilt headopening for studio umbrellasexchangeable tripod connectionSCOPE OF DELIVERYsupport clampspigot adapter (1/4" female, 3/8" female)

€12.00*
%
BRESSER BR-TP PRO 100cm Tripod Bag for 3 Lightstands
This 100 cm long BRESSER BR-TP PRO bag is designed to carry up to 3 lightstands. The bag features three inner compartments for storing the tripods. The inner compartments are padded to provide optimal protection against scratches. In addition to the top zip, there is also a side zip to make storing the tripods easier. FEATURES Tripod bag for up to 3 lamp tripods Three padded inner compartments Zips on side and top With carry handles and adjustable shoulder strap Dimensions: 100 x 20 x 20 cm Weight: 0.7 kg WHAT’S INCLUDED Studio bag Shoulder strap

€10.00* €27.50* (63.64% saved)
%
BRESSER-H JM-37 Magic Arm 18.5cm
A sturdy and flexible connecting component which can be easily turned to any direction. One arm has a cold shoe connection, the other arm has a 1/4" male thread for camera accessories.FEATURES1/4" male thread and 1/4" female thread with cold shoe connectionlength(max.): 18.5 cm1 ball joint per armSCOPE OF DELIVERYmagic arm

€11.00* €22.00* (50% saved)

Customers also viewed

BRESSER BR-21 Gooseneck with table clamp/ tube clamp and spring clamp
Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm

€18.00*
%
BRESSER BR-22 Gooseneck with clamp + Spigot
The robust BRESSER BR-23 gooseneck can be quickly and easily mounted anywhere on tables or boards. LED lights, panel lights, light photo studio flashes and various daylight lights can be mounted on the screwed-in spigot connection with a 1/4" screw thread. In addition, mini LED lights etc. can also be screwed on. The flexible part of the gooseneck has a length of 44 cm and has a load capacity of approx. 1 - 2 kg, taking into account the angle of inclination. With its total length of 60 cm, the practical BRESSER BR-23 gooseneck can be stored quickly and space-saving in the photo studio equipment.Note: The load capacity of approx. 1-2 kg depends on the tilt angle and may therefore vary.PROPERTIESFlexible, bendable arm: 43 cm/ Ø 15 mmRubberised spring clamp with strong spring1/4" spigot adapterClamp opening: max. 55 mmClamp width: 80 mmLoad capacity: 1- 2 kgSCOPE OF DELIVERY1x Flex arm1x Spigot 2,5 cm

€8.00* €14.00* (42.86% saved)
BRESSER BR-20 Gooseneck with clamps
Whether in the photo or film studio, for camping or leisure activities, the BRESSER BR-20 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two sturdy spring clamps, the flexible arm is quickly and flexibly attached to table tops or tripods.The flexible part measures 43 cm in length and with a total length of 64 cm, the gooseneck can be quickly stowed away to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER BR-20 Gooseneck will not hold. The rubberized spring clips with a width of 7,5 cm and an opening of up 5 cm can also be attached to tubes and rods, microphone stands and lamp tripods.NOTE: The load capacity of up to 1 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm: 43 cm/  Ø 15 mmTotal length: 64 cmRemovable rubber lipsSpring clamp opening: max. 5,5 cmClamp width: 75 mmLoad capacity: max. 1 Kg, dependig on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-20 Flex Arm

€16.00*
%
BRESSER JM-01 Pipe Clamp 35mm
A strong pipe clamp made of metal which can be screwed onto a light stand thanks to the 3/8'' female thread on the lower side of the clamp. This way a crossbar with a thikness of 25 mm to 35 mm can be put onto the light stand.FEATURESsolid metal pipe clampdiameter: 25 - 35 mm3/8'' female thread on its lower sideSCOPE OF DELIVERY1x Pipe Clamp 35mm

€6.00* €12.00* (50% saved)
ISA Space Exploration NASA-themed Space Projector
Astronauts, space shuttles, satellites – are you fascinated by anything that goes into space? Then why not bring the magic of space travel into your own home with the ISA Space Exploration NASA-themed space projector? You’ll be amazed as you let the 24 motifs on the 3 slide discs light up one after the other across your wall. Get up close and personal with famous NASA astronauts on their spacewalks and explorations with the moon rover. From launch position to flight and docking, the space projector also displays exciting space shuttle photos. Plus, there are also the stars in our own solar system – the moon, planets such as Saturn and Earth, as well as our own sun will show you their best side in these bright images. Launch into space – with the space projector Before you get started, why not decorate your space projector with a rocket, the NASA logo and other great motifs using the stickers provided? Then all you need to do is insert the disc and you’ll have lift off! Operation is extremely easy – simply turn the slide disc to admire the next motif. You’ll get the prefect picture if you keep the distance to the wall or ceiling between 1.8 and 2 m. The images will shine perfectly on a large project area of 61 x 66 cm. You can use the focus wheel at the front to focus. From the wall to the ceiling and back: simply rotate the globe in the stand to adjust the projection angle. This way, your space motifs will always appear exactly where you can view them best. Follow in the footsteps of NASA’s famous explorers with the ISA Space Exploration NASA-themed Space Projector. FEATURES Projector for children with 24 astronomical images Includes stickers with space and NASA theme Optimal distance to wall/ceiling: approx. 1.8 m - 2 m Large projection area: approx. 61 x 66 cm at a distance of 2 m Focus wheel 3 slide discs with 8 topical motifs Astronauts in space Space shuttles and satellites The sun, moon and planets Freely adjustable projection angle Power supply: 3x AA batteries (not included) For children aged 6 and abovePACKAGE CONTENTS Space projector Stand 3 slide discs with 8 astronomy-themed images Space and NASA-themed stickers Instruction manual

€24.90*
BRESSER BR-20RGB LED Tube 20W
Bresser BR-20RGB LED Tube 20W – Portable LED Tube with Battery, RGB, CCT and 13 Lighting Effects Bring your photo and videography to life with the Bresser BR-20RGB LED Tube 20W – a powerful, versatile, and wireless LED light that perfectly combines creativity and functionality. Whether you're a professional photographer, creating content for YouTube or TikTok, or simply looking for the ideal ambient lighting for your studio or home recordings – this RGB LED tube is the solution for dynamic and creative lighting. Versatile LED Tube for Creative Creators With a light output of 2400 lumens, a CRI value of 95+, and a color temperature range from 3000 to 6000K, the BR-20RGB LED Tube delivers sharp, true-to-life lighting in any situation. Thanks to the RGB mode (0–360 degrees), you can set any desired color, while the CCT mode gives you full control over warm or cool color temperatures. The lamp is equipped with 198 white LEDs and 60 RGB LEDs, allowing you to use standard white light as well as 13 pre-programmed lighting effects such as TV, Lightning, Fireworks, Party, SOS, and Police Lights – ideal for creating mood, drama, or action in your visuals. Portable, Rechargeable and Ready to Use The BR-20RGB LED Tube is designed for maximum mobility and flexibility. Thanks to the two included NP-F550 batteries, you can work completely wirelessly – perfect for on-location shoots or places without power outlets. The IR remote control makes it easy to adjust color, effect, and brightness – even while filming or photographing. Weighing only 278 grams and measuring 56 cm in length, this LED Tube can be easily mounted on tripods or camera accessories via the 1/4"-20 thread or the cold shoe mount. This makes it usable in almost any angle or setting – from studio to outdoor locations. Let Your Creativity Shine – with the Bresser BR-20RGB LED Tube! This LED tube is essential for anyone who wants to work flexibly, mobile, and professionally with light. Thanks to the built-in battery, remote control, and a wide range of adjustable features, this LED tube offers maximum freedom and quality. Perfect for: Portrait photography and studio shoots YouTube videos and TikTok content Livestreams and online presentations Film productions and background effects Creative lighting in small spaces FEATURES Power: 20W Light output: 2400 lumens CRI value: >95 (very high color accuracy) Color temperature: adjustable from 3000K to 6000K (CCT mode) RGB mode: adjustable 0°–360° 13 special lighting effects: e.g. Fire, TV, Lightning, Ambulance, Party, Police Control: IR remote control included Power supply: 2x NP-F550 batteries (included) or via mains power Dimensions: 53 x 22 x 560 mm Weight: 278 grams Mount: 1/4"-20 thread and cold shoe mount SCOPE OF DELIVERY 1x Bresser BR-20RGB LED Tube 20W 2x NP-F550 batteries (2200 mAh) 1x Charger with USB cable (8V/3A) 1x IR remote control 1x Portable carry bag

€95.00*