BRESSER BR-56 Background Clamp DeLuxe (4pieces)

A practical, universal plastic clamp with a very strong spring to clamp background paper, background cloth or collapsible reflectors to a bar or a tube.With these clamps you can for instance prevent a background roll from unrolling. The clamps are provided with a movable top. This provides a stable fixation and uniform pressure on the object to be fastened.NOTE!These clamps are attached to the side of the background roll, the core of the roll or the crossbar of the background system (NOT onto the background roll itself)FEATURESBackground clamp made of plasticadjustable topLength: ca. 12 cmOpening: ca. 4 cmSCOPE OF DELIVERYMulti clamps 5 pieces

The universal plastic studio clamps are very handy and have a very strong spring. The clamps can be used versatily in the photo studio, e.g. for the attachment of paper or vinyl to a table and for the securing of small accessories, rods or reflectors. There are moveable red clamp jaws at the end of the clamps which results in a secure grip and an equal pressure on the clamped object.FEATURESstrong springmoveable clamp jawssize: 6.5 x 5.5 cmopening (max.): 3 cmweight: 8 g eachSCOPE OF DELIVERY5x studio clamp 6.5 cm

Whether in the photo or film studio, for camping or leisure activities, the BRESSER BR-20 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two sturdy spring clamps, the flexible arm is quickly and flexibly attached to table tops or tripods.The flexible part measures 43 cm in length and with a total length of 64 cm, the gooseneck can be quickly stowed away to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER BR-20 Gooseneck will not hold. The rubberized spring clips with a width of 7,5 cm and an opening of up 5 cm can also be attached to tubes and rods, microphone stands and lamp tripods.NOTE: The load capacity of up to 1 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm: 43 cm/  Ø 15 mmTotal length: 64 cmRemovable rubber lipsSpring clamp opening: max. 5,5 cmClamp width: 75 mmLoad capacity: max. 1 Kg, dependig on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-20 Flex Arm

The BRESSER MR-300 electric background system was developed to optimize available space in your studio. The background mount is designed for 1 background roll and comes with a remote control. The crossbar is equipped with an internal motor. Two sliding holders secure the background roll in place so that it rotates together with the crossbar. The system supports background rolls with different widths up to a maximum of 2.72 m. The total width of the background system is 300 cm. The weighted bar ensures that the background stays tight and prevents the bottom end from rolling up. Small spirit levels on both sides of the bar help to ensure that the background is mounted in a level position. The set also comes with wall mounts, which can be used to mount the system on a studio wall or ceiling. It is also possible to use the system on stable lamp stands. We recommend the following lamp stands (available separately): Item no. F002083: BRESSER BR-C30 Heavy duty lamp stand, 300 cm Item no. F004343: RESSER BR-LS310 PRO lamp stand, 310 cm FEATURES Flexible electric background system Built-in motor Remote control Weighted bar Can be mounted on walls or ceilings Designed for stands with a spigot adapter WHAT’S INCLUDED 1x 102 cm aluminium rod 2x 99 cm aluminium rod 1x weighted bar 1x adhesive tape 2x roll fixers 2x wing nuts 1x power cable with remote control2x wall mounts