BRESSER BR-6 tiltable Support Clamp for collapsible Reflectors and Backgrounds

Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm

This universal clamp can be attached to a shooting table, a shelf or a desk. Also very suitable to fix background paper and cloth.FEATURESsturdy metal clampstrong metal springremovable rubber lipswidth: 9 cmmax. opening: 6 cm SCOPE OF DELIVERY1x studio clamp

Your new right hand in the studio: The BRESSER 110-116BM 3 Section Boom Arm scores with its 3 sections and the possibilty to position lamps at right angles. Need a perfect lightning from above? Nothing could be easier, because this boom arm masters even difficult lightning situations in the whole range of video production and photography easily. I supports you in different ways of working: Use it in the possible total length of 245 cm on a tripod with spigot connection, or hold the solidly made boom arm comfortably in your hand with the 2 padded handles and add light formers or microphones. As a boom arm stand, the unit shows its versatility.3 section boom arm: All good things in three!Simply threefold practical: the 3 sections can be adapted to suit the current purpose. But they are not only strong as a team, they also do a really good job separately. The telescopic pole, which is held by a sturdy clamp, brings a particulary high degree of flexibilty to the studio. You can extend the telescopic section from 79 to 153 cm and use it with a spigot connection. The main section can be attached to the variable tilt connection and measures 79 cm. And if things do get heavy: The centre piece with the tilt connection ( gallows) is connected with a clamp into which you can insert 2 sections and screw them tight.This multifunctional extension arm is guaranteed to do a good job in the photostudio and video production, because despite the sturdy construction with a tube diameter of 2,5 cm and 2,8 cm it is a real lightweight with only 1160 g. In addition, the powder-coated aluminium for less relfection is easy to handle. You can ensure the right balance for heavy weight lamps with the supplied conterweight bag. Simply fill the two cpompartments of the bag and with the the practical strap, yu can quickly attach the conterweight to the boom arm.But notice: For maximum stability the conterweight must correspond to the weight of the mounted studio flash or light shaper!You should not exceed the realistic maximum load of 3 to 4 Kg when using the extension arm.PROPERTIESMultifunctional aluminium boom armTelescopic functionHandels for comfortable workingFor photo and video productionLoad capacity from 3- 4 kgCan be used as a boom arm and lamp tripodHigh -quality and stable constructionSCOPE OF DELVERY1x Boom arm with 3 sections and spigot connection1x Conterweight- sand bag with velcro fastener2x Nylon bag for sand

Practical two-colour folding background with versatile application. For the small social media studio, webinars or for on location photography, with the Pop Up System you have a space-saving and quick green and blue background with a long green and blue train.With the additional train, it is very easy to create a cove, which is suitable for full body shots as well as product photos. The colours green and blue are often used for chromakey shots, to simplify the cropping of subjects.Whether outdoors or in the studio, the 2 in 1 background can be used as a photo background or also videobackground. The foldable background BRESSER TR-16 is easily attached to tripods, for example, using the Velcro loops. The sturdy metal frame provides the necessary tension for the high-quality fabric to ensure a crease-free background.When folded, the backdrop is quickly stored in the bag provided and can be conveniently taken along to any photo shoot.PROPERTIESFoldable background for full body shotsFor colour based image release Fabric fits tightly around the frameSturdy cotton fabricVelcro loops for hanging upDimensions: 180 x 240 +240 cmTransport size: Ø approx. 80 cmSCOPE OF DELIVERYFoldable backgroundBag

Practical foldable backdrop with versatile applications. For the small social media studio, webinars or in the field of mobile photography, with the Pop Up System you have a space-saving and quick chromakey green background with a train for simplified image release. With the additional train, it is very easy to create a cove, which is suitable for both full-body shots and product photos.When folded, the background is very handy and can be easily taken to any photo shoot in the bag provided.PROPERTIESFoldable backgroundFabric fits tightly around the frameSturdy metal frameStrong cotton fabricGreen background with train. 180 x 240 +240 cmSCOPE OF DELIVERYFoldable backgroundBag