BRESSER BR-D90 PRO-1 Two roll holders for background system

The BRESSER BR-TP240 background system is the especially portable and space-saving solution for photographers with frequent outdoor shootings as well as for smaller photo studios with a permanent lack of space. Thanks to the padded tripod bag with adjustable shoulder strap, the complete set can be transported safely and comfortably to the place of use, even with a small car. The aluminium lamp tripods can be infinitely adjusted in height from 83 cm to 240 cm and are equipped with strong air suspension. Thanks to the black coating, unwanted reflections during photography are minimized. Unlike most background supports, the BR-TP240 has no crossbar. With the suspension device used here, the background roll can be conveniently rolled up and down using a chain, exactly as known from wall brackets. FEATURES Portable background support for a background role Suitable for background rolls up to 2.72 m Height adjustable from 83 - 240 cm Strong air suspension of lamp tripods Including one paper background roll 1.35 x 11 m Colour: black Paper quality: 180 g/m² SCOPE OF DELIVERY 2 lamp tripods 2 spigot adapters (1/4'' male, 3/8'' male) Transport bag for up to 3 tripods Shoulder strap 2 brackets 2 roll holders Pull chain Weight: 220 g Paper background roll 1.35 x 11 m black

Delivering an ultra-soft and evenly distributed light without a hotspot, the round soft LED lights with a diffuser plate are an ideal light source for beauty shots or video recordings of interviews. As LED lights produce a minimal amount of heat, your subject will not be susceptible to sweating. The bi-colour function and dimmer allow you to adjust the colour temperature and brightness to your individual needs. Power is supplied via an 8.6 m power cable, giving you plenty of mobility in your studio. The light can also be powered by rechargeable batteries, which are available separately. FEATURES Round LED light with diffuser plate Ultra-soft and even illumination Ideal for portrait shots Gradually dimmable from 10 to 100% Adjustable colour temperature from 3200 K to 5600 K (in intervals of 100 K (setting wheel) or 400 K (push buttons) Remote control range: up to 30 m Powered by power adapter Rechargeable battery connections (for a V-lock battery or 2x NP-F rechargeable batteries, batteries not included) DMX connection WHAT’S INCLUDED LED light Power adapter (cable length approx. 8.6 m) Remote control (battery-operated, 2x AAA batteries not included) Carry case Instructions

BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on most background system. The core has an inner diameter of 48 mm.OUR RECOMMENDATION A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394). Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen. FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrgound roll

BRESSER MB-1 Background System for 3 Backdrops – Wall or Ceiling MountThe BRESSER MB-1 background system is a practical and affordable solution for hanging multiple background rolls in your photo studio. Designed especially for paper rolls it offers space for three rolls that can be easily rolled up and down. Thanks to the manual chain drive, you can quickly switch backgrounds without losing time – ideal for photographers who frequently change setups. Use and Installation The roll holders are simply inserted into the cardboard core of the background roll and expanded until they fit securely. With the chain control, the roll can be unwound to the desired length. The metal wall or ceiling brackets ensure stable mounting and a professional appearance. Note: This product is suitable for paper rolls up to 2.72 x 11 meters with a maximum weight of approximately 5–6 kg per roll. Using heavier or larger rolls (e.g. vinyl) is technically possible but not recommended due to the risk of sagging or damage. Use of such rolls is at your own risk. For questions or advice, please contact us – we’ll be happy to help. FEATURES Suitable for paper rolls – sturdy, stable, and designed for cardboard core rolls with a diameter of 4.5 to 7.5 cm Holds three background rolls – practical and tidy, no more loose rolls in the studio Manual chain drive – smooth rolling of the desired backdrop Wall or ceiling mount – flexible installation depending on studio setup Roll holders with adjustable diameter – fits most standard paper rolls Strong metal brackets – for safe and stable installation Note: the system is not self-braking; optional roll clamps can be used for extra safety IN THE BOX 2x Wall brackets 3x Pairs of roll holders 3x Chains 3x Counterweights 8x Screws

NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.Due to the short focal length the BRESSER Messier AR-127S telescope provides large and bright fields of view. Don't forget to observe the Anrdomeda Galaxy with the Messier AR-127S! The glow of this object that you can observe from the immense distance of 2 million lightyears is as spectacular as it is to watch large nebulae with the Messier AR-127S. Because of the large aperture it is even possible to use nebular filters on the Messier AR-127S telescope. These filters can enhance the appearance of emission nebulae to an astonishing contrast level. The special four lens construction delivers a better perfomance than a classical two lens achromat of this focal length.FEATURESOptical design: refractor telescopeLens diameter: 127 mm / focal length: 635 mm / F/5Maximum recommended magnification: 254xTelescope for night and solar observationHigh quality BRESSER refractor opticsUniversal telescope for planets, double stars, planetary nebulae and deep-skyExcellent focuser with 2,5'' (65 mm) open diameter6x30 straight through viewfinder reticleoptimized finder socket for comfortable useCradle rings with handle and integrated piggyback camera holder (1/4 thread)Smartphone camera adapter for sky navigation includedUniversal 44 mm Dovetail plate with stainless steel rail (fits LXD75/Great Polaris/EQ5)50,8 mm (2'') to 31,7 mm (1,25'') adapter with integrated T2 thread (T2-adapter ring for your camera is needed) SCOPE OF DELIVERYOptical Tubeaperture solar-filtereyepieces: 26 mm Super Ploessl 31.7 mm (1.25'')2'' eyepiece adapter8x50 viewfinder Smartphone adapter for celestial navigationDiagonal mirrorTube clamp with handle and camera holder

BRESSER EBS-2 Electric Background System for 2 Rolls The BRESSER EBS-2 electric background system is the ideal solution for professional photographers and videographers who want to work efficiently with paper background rolls. Thanks to its electric motor design, background rolls can be automatically raised and lowered — without any manual effort. This saves time and allows for quick background changes during shoots, significantly improving studio workflow. Efficient and powerful design Each motor in the system can support up to 10 kg, making it perfectly suitable for heavier and wider rolls with a maximum width of 2.72 meters. This allows you to work effortlessly with various types and sizes of paper backdrops. The system provides stability, reliability, and flexibility — an excellent choice for professional studios. Space-saving and versatile mounting The BRESSER EBS-2 system can be easily mounted on the ceiling or wall. This keeps floor space free, ensuring a tidy and efficient workspace. The installation is sturdy, safe, and durable, guaranteeing years of reliable performance even with frequent use. Easy operation with remote control The included 2.4GHz remote control allows wireless operation of the system — ideal for larger studios. You can also control it via a control box with cable for direct operation. The connection is stable and reliable, but please note that AAA batteries are not included. Reliable performance The heavy-duty motors, durable shafts, and control unit ensure smooth and precise operation. With a power rating of 50W and a power supply of AC 110–224V / 50–60Hz, the system is powerful enough for everyday professional use. Note: This product is suitable for paper rolls up to 2.72 × 11 meters with a maximum weight of approximately 5–6 kg per roll. Using heavier and larger rolls, such as vinyl, is technically possible but not recommended due to the risk of sagging and potential damage. Use of such rolls is at your own risk. For questions or advice, please contact us — we are happy to help. Main features Electric background system for 2 paper rolls Automatic roll-up and roll-down via motors Wireless remote control (2.4GHz) Manual operation via control box Suitable for ceiling or wall mounting Space-saving design Power: 50W Power supply: AC 110–224V / 50–60Hz Maximum roll width: 2.72 meters Load capacity per motor: 10 kg Scope of delivery 2 × Expan drive with motor 2 × Expan drive unit 2 × Wall/ceiling brackets 1 × Power adapter 1 × Controller 1 × Remote control 1 × Control box 1 × Mounting hardware 1 × User manual

The cloth can be used on the floor and as a background wall cloth. It consists of 2 parts which are glued together. SCOPE OF DELIVERY 1x cloth with print 2,7x2,5 meter