BRESSER BR-FA014 Gooseneck 32 cm on both Sides with 5/8'' Opening and Spigot

The robust BRESSER BR-23B gooseneck can be quickly and easily attached anywhere to tables, tubes and tripods using the tube clamp. On the screwed-in spigot connection with a 1/4" screw thread, various daylight lamps can be mounted from LED lamps, panel lamps, light photo studio flashes. In addition, mini LED lights etc. can also be screwed on. The flexible part of the gooseneck has a length of 43 cm and has a load capacity of approx. 1 - 2 kg, taking into account the angle of inclination. With its total length of 59 cm, the practical BRESSER BR-23 gooseneck can be quickly stowed away in the photo studio equipment to save space.NOTE: The load capacity of approx. 1 - 2 kg depends on the tilt angle and may therefore vary.  FEATURESFlexible bendable arm: 43 cm/ Ø 15 mm Total length: 59 cmScrew clamp opening (maximum): 35 mmScrew/ tube clamp: W: 4 cm x L: 7,5 cm x D: 6cmLoad capacity: max 1 - 2 kg, depending on angle of inclination SCOPE OF DELIVERY FlexarmSpigot adapter (1/4'' male / 3/8'' male)

The BRESSER BR-2504X8C-B1 is a versatile and reliable camera stand for use in a wide range of scenarios. Made from 100% carbon fibre, these camera stands are extremely stable and offer additional stiffness and a very low total weight. The stand comes with two centre columns. The small centre column has a length of 9.5 cm, and gives the stand a minimum height of 25 cm when the ball head is used. The large centre column has a length of 33 cm, and enables the stand to reach a maximum height of 165 cm when the ball head is used. The bottom end of the centre columns features a spring-loaded hook for securing a counterweight for additional stability. The legs can be adjusted individually in three different positions. One leg can be removed and used as a monopod by attaching the ball head onto the leg. This stand comes with a full aluminium BRESSER B-1 ball head, which rotates 360 degrees and can be tilted to any angle, including the standing position. The Arca Swiss-compatible quick release plate can be attached to a camera or a viewer in order to ensure a secure connection to the B-1 ball head. A rotatable ring is attached to the base of the ball head, and allows the camera to swivel without the observer while maintaining the same height and level, making it ideal for panorama photography. FEATURES Full carbon tripod Aluminium ball head Maximum load of 10 kg Minimum height of 25 cm Maximum height of 165 cm Height when folded: 47 cm Weight of stand and head: 1450 grams Twist-lock system Convertible to monopod Interchangeable centre columns Long full carbon centre column Short aluminium centre column Arca Swiss quick release plate Hook for counterweight on long centre column 360-degree rotatable and tiltable ball head Double spirit level on ball head Degree markings for panorama shots WHAT’S INCLUDED Camera stand Ball head Quick release plate Long centre column Short centre column Hex key Storage bag for tripod head Tripod bag with shoulder strap Instructions