- 12W LED illuminant with colour temperature of 3200K
- Standard E27 thread suitable for common lamp holders
- Energy-saving, long life, low heat generation
- Diameter: 12 cm / length: 12 cm / weight: 190 g
- Scope of delivery: 1 LED (≙ 65W light bulb)
Currently not available
With its E27 base, the LED lamp can be screwed into most of your existing lamp holders and softboxes. Please note the wider diameter compared to CFL spiral lamps!
The BRESSER BR-LB1 LED lamp provides a power of 12W LED, which is comparable to a classic 65W light bulb. With a colour temperature of 3200K it produces a bright warm light.
ALTERNATIVE
A version with a daylight temperature of 5500K can be found under article number F004013.
Batteries included: | No |
---|---|
Batteries required: | No |
Color temperature (Kelvin) from: | 3200 |
Colour: | white |
Field of application [Photography]: | Photography , Videography |
Flash counter: | No |
Flash lamp: | No |
Illuminant: | LED |
LED modelling lamp: | No |
Lamp included: | No |
Light source replaceable: | No |
Luminous flux (Lumen): | 2000 |
Material: | Glass |
Metal reflector: | No |
Overheat protection: | No |
Photo cell: | No |
Power Illuminants (Watt): | 12 |
Protection cap: | No |
Synchro flash cord included: | No |
Tilt head with tripod connection: | No |
Total height (mm): | 120 |
Total length (mm): | 130 |
Total width (mm): | 120 |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- Safe workspace! Maintain order and avoid tripping hazards.
- Risk of electric shock! Completely switch off and disconnect the studio flash or lamp from the power supply before maintenance.
- Risk of burns! Allow the lamp or flash tube to cool completely before replacing it.
- Risk of breakage! Flash tubes and lamps are fragile – handle with care and avoid hard impacts.
- Explosion hazard! Use only original or approved replacement lamps and flash tubes to minimise risks.
- Correct installation! Insert the new lamp or flash tube into the socket according to the instructions.
- Keep dry! Do not use the device in humid environments and store spare flash tubes and lamps in a dry place.
- Risk of fatal electric shock! Never open a studio flash or lamp to replace or repair internal components.
- Proper disposal required! Dispose of damaged or broken flash tubes and lamps according to local regulations.
- Check correct voltage! Always ensure that the replacement lamp has the correct voltage and specifications for the flash head.