Daykight ringlight with 176 LEDs and an output of 45W for uniform illumination
- Dimmable 45 W LED ring light, 4200 lumens
- Daylight: 5500 K colour temperature; 3200 K with colour filter
- Powered by power adapter with 1.2 m cable
- Diameter: 22.5 cm (inner diameter), 34 cm (outer diameter) / weight: 720 g
- Included: ring light, power adapter (approx. 1.2 m cable), diffusion filter (two pieces), 3200 K filter (two pieces), carry case
€99.00*
Unfortunately, no longer available
Product number:
F004020
EAN:
4007922013459
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER BR-RL12 dimmable LED Daylight Ring Light 45W/4200 Lumens with Carry Bag"
Ring lights are primarily used for portrait and beauty shots and are very popular among beauty vloggers.
They create a circular reflection around the pupils and minimize shadows on the face by casting an even light onto the subject, removing the need for time-consuming postproduction with image processing software.
LED ring lights also produce a minimal amount of heat. This prevents your model from sweating, meaning that you don’t need to worry about make-up sliding off.
FEATURES
WHAT’S INCLUDED
They create a circular reflection around the pupils and minimize shadows on the face by casting an even light onto the subject, removing the need for time-consuming postproduction with image processing software.
LED ring lights also produce a minimal amount of heat. This prevents your model from sweating, meaning that you don’t need to worry about make-up sliding off.
FEATURES
- Ring light with 176 LEDs
- Dimmable brightness
- 45 W power
- 5500 K colour temperature
- Includes colour filter for 3200 K colour temperature
- 4200 lumen light output
- Colour rendering index: 93
- Tiltable connection for all lamp stands with spigot adapter
- Powered by power adapter with 1.2 m cable
WHAT’S INCLUDED
- 1x ring light
- 1x power adapter (approx. 1.2 m cable)
- 1x diffusion filter (two pieces)
- 1x 3200 K filter (two pieces)
- 1x carry case
| Batteries included: | No |
|---|---|
| Color temperature (Kelvin) from: | 5500 |
| Colour: | black |
| Colour Rendering Index %: | 93 |
| Flash counter: | No |
| Flash lamp: | No |
| Illuminant: | LED |
| LED modelling lamp: | No |
| Lamp included: | No |
| Light source replaceable: | No |
| Material: | Plastic |
| Metal reflector: | No |
| Overheat protection: | No |
| Photo cell: | No |
| Power supply 1): | 15V Mains adapter |
| Protection cap: | No |
| Synchro flash cord included: | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Risk of overheating! Ensure adequate air circulation.
- Avoid moisture! Do not use the device in damp or wet environments.
- Risk of burns! Lamps can become hot – allow them to cool fully before replacing.
- Electrical safety! Use only the recommended power source and regularly check cables for damage.
- Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
- Fire hazard! Keep flammable materials away from lighting.
- Eye protection! Do not look directly into the lamp to avoid eye damage.
- Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
- Store dust-free! Keep in a dry and clean place.
- Follow intended use! Use the device only for its designated purpose and according to the instructions.
- Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
- Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
- Safe transport! Pack the product carefully to minimise damage during transit.
- Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.
