BRESSER BR-TPH008 2-Way Video Head 60 mm

This is a solid and sturdy fluid head with a supplied handle which provides a smooth sequence of your photography. The quick release plate is secured. The load capacity of overall 8 kg allows you to connect all possible DSLR and medium format camera. Made of very sturdy and qualitative metal. A spirit level for the horizontal alignment is integrated. An angle scale at the side of the fluid head makes it possible possible to reproduce old recordings.FEATURESfluid head with gripdouble secured quick release plateload capacity: 8 kgspirit level integratedangle scale on the tilt head3/8" connectionSCOPE OF DELIVERY1x fluid head1x grip

The BRESSER BX-10 Pro Tripod with Fluid Pan-and-Tilt Head is a very versatile tripod that is height and angle adjustable. The ball head has a load capacity of 12 kg. This makes the tripod extremely flexible and one can work with different camera models, binoculars, spotting scopes and astronomy binoculars. The non-slip rubber feet are ideal for grip on smooth surfaces indoors, but also offer extremely good grip on muddy, sandy and uneven surfaces outdoors. This all-round tripod by BRESSER features aluminium alloy tripod legs and a fluid head with a 70 mm diameter base. The four-piece legs are locked with a quick-lock swivel system. The base of the ball head is equipped with a 3/8" mounting thread. For panning and tilting the ball head, the supplied handle is used. This handle can be mounted on the left or right side. Also, the handle can be adjusted in length with a minimum length of 26 cm and a maximum length of 35 cm. The desired length can be fixed with the handle extension lock. The folded tripod has a height of 82 cm and can be extended to a height of 184 cm. If you also extend the centre column, you reach a maximum height of 216 cm. The minimum working height of the tripod is 78 cm. If you spread the legs to their maximum, the minimum working height is 62 cm. The tripod head allows 360-degree swivels and tilts from +90 to -70 degrees. The quick release plate is universal and features a standard tripod connection (1/4" screw) and a 3/8" screw that allows you to easily mount any camera, binocular adapter, spotting scope or astronomy binocular on the tripod head. Thanks to the built-in level, you can also see if your tripod is level. The unused screw can be turned into the appropriate compartment on the tripod head so that it does not get lost and is always at hand. The quick release plate is secured by a safety device. The tripod with fluid head weighs 3,786 grams. The center column has a hook that helps to ensure stability. For example, use a sandbag, water bag, backpack and even rocks in a bag to improve balance. A carrying bag is included for easy storage and transportation. FEATURES Very sturdy all-in-one tripod High quality construction Fluid Pan-and-Tilt Head Folded length: 82 cm Minimum working height: 78 cm (tripod legs normally spread) Minimum working height: 62 cm (tripod legs spread to the maximum) Maximum working height: 216 cm Tripod load capacity (as a set): 10-12 kg Load capacity ball head: 10-12 kg Tripod load capacity: 20 kg Tripod and ball head weight: 3,786 grams Level Height adjustable central column Hook for counterweight 1/4" and 3/8" connection Carrying bag SCOPE OF DELIVERY BRESSER BX-10 Pro Tripod BRESSER BX-10 Pro Fluid Pan-and-Tilt Head Fluid Pan-and-Tilt Head handle Quick Release Plate 50 x 92 mm 1/4" screw 3/8" screw Carrying bag with pocket

The background motif is printed in one piece on a light fabric. The print is very sharp and versatile. As the fabric is very light, the cloth can not only be easily attached to a background system, but can also be hung on a leash or attached directly to the wall with double-sided adhesive tape. The fabric does not come folded, but rolled on a bar to ensure fast use as crease-free background. FEATURES printed fabric background prick sharp photo motif crease-free rolled up light material SCOPE OF DELIVERY 1x background cloth with photo motif 3.0x3.0m, rolled up

Fast 90 mm high-performance astrograph for demanding astrophotographers and observers with 5 lens elements in 5 groups. Due to the complex optical structure with five lens groups and five elements (quintuplet), including two SD (Super ED) lenses and an ED lens (Extra-low Dispersion) , a virtually aberration-free optical system was created. This revolutionary astrograph is compatible with a full-frame digital DSLR or an even larger 44x33 mm camera. The 90 mm astrograph with fast aperture ratio delivers exceptionally sharp, high-contrast and small point stars from the centre to the corners of the field of view. In addition, it is also ideal for visual observation with a very large field of view but also for planetary observation with high magnification. The VSD90ss is designed so that there is a "long peak range" in the adjustment accuracy of the sharpness, so that photographers can always achieve satisfactory results in astrophotography. Even if the focus is not quite precise, round and sharp stars are still shown throughout the entire image field. Illumination without vignetting In most cases, an astrograph also produces optical vignetting (a gradual decrease in light rays towards the edge of the image) This is mainly caused by rear lenses being shaded by the front lenses. Because of this darkening, it is relatively normal for the photographer to have to further edit the image after taking the picture and also have to do some additional so-called flats before taking the picture. To solve this problem, the VSD90ss uses wide aperture lenses in the rear elements, securing over 90 % of the light volume at the edge of the 60 mm image circle. Since the light intensity is uniform throughout the entire image field of the VSD90ss, there is no need for complex technology to prevent edge darkening. The VSD90ss is coated with the most modern coatings of extremely high reflectivity. These coatings have been specifically developed to optimize the properties of each individual lens element without degrading contrast and light intensity across multiple lenses. Numerous gradations of light bring beautiful point-like stars into the image field The low optical vignetting ensures sufficient illumination and thus eliminates the asymmetric flare caused by bright, diffraction-limited stars. It prevents stars at the edge of the 60 mm image circle from exhibiting deformations such as comets, astigmatism or coma. Since the illumination of the image field is relatively similar from the center to the edge of the image, you can expect excellent star imaging. Please note: *Depending on the recording system used, mechanical vignetting can still occur due to the camera body or incorrect adapters. 96.7％ Strehl for impressive visual observations The VSD90ss offers a flattened large field of view with a low magnification wide angle eyepiece. Even with a high-quality wide-field eyepiece with a large field of view, you can get sharp images of stars in the entire field of view when visually observing! In the centre of the field of view, a Strehl intensity of an impressive 96.7% is achieved at visible wavelengths. This Strehl ratio exceeds that of the SD81SII apochromat at 95.7%, which is known for its excellent optical properties, and this also works excellently when observing the moon and planets at high magnification. The versatile large and stable focuser The VSD90ss has a large focuser with a diameter of 87.5 mm to make optimal use of the large illumination field of 60 mm. With the large extension that is compatible with many accessories, it is perfect for astrophotography up to large format or 35 mm full frame DSLR cameras. Thanks to its precise manufacturing, it is also suitable for very heavy cameras without tipping. The precision locking lever of the eyepiece extension The focuser's extension tube has a locking lever that holds the extension tube firmly in position even when using heavy cameras such as large format cameras or CCD cameras with a large sensor. The locking lever clamps the rack gear to the extension barrel so that the viewing angle or focus on your camera does not shift. Compatible with motor driven focusers An optional two-speed motor focuser (not included) is available for the VSD90ss to provide sensitive focusing. An EAF (Electronic Automatic Focuser) from ZWO or equivalent can also be retrofitted. Optional VSD Reducer for even faster results The tried and tested optional VSD reducer, which was also used on the predecessor, the VSD 100, is also compatible with the VSD90ss. The photographer gets even faster results in astrophotography with an aperture ratio of 1:3.9. CHARACTERISTICS 90 mm aperture, 495 mm focal length (F5.5) Needle-fine stars up to the image field edge in 44x33 mm format 5 lens elements in 5 groups Image illumination up to 60 mm Resolution power: 1.29 Limit size: 11.5 Light gathering capacity: 165x Illumination: 60 mm Dimensions: 115 mm diameter x 600 mm length (476 mm length for storage) Weight: 4.3 kg Connections/Thread: Size thread/84 mm (pitch 1 mm), 60 mm (pitch 1.0 mm), 42 mm for T-ring push fit / 60.2 mm, 50.8 mm and 31.7 mm Solar observation: separately available solar projection approach B Optional VSD100 reducer compatible (opening ratio F: 3.9) SCOPE OF DELIVERY VSD90ss high performance astrograph

The BRESSER table-tripod with its height of 24 cm is a lot more versatile than one might think. It can be used lying in prone position, on observation posts as well as simply from a table. It is useful for a large variety of BRESSER binoculars* as well as BRESSER spotting scopes up to the weight of 1.000 g. With the convenient adjustment handle the tripod head can be moved vertically and horizontally; it also can be fastened to provide a steady image for observations. The BRESSER table tripod can be folded to have space-saving, small package for mobile use (dimensions when folded: ca. 295 x 65 x 54mm; weight: 245 g). FEATURESsturdy table tripod1/4" threadeasy positioning and fixation of the tripod head via handlecompact and lightweightSCOPE OF DELIVERYTable tripod 24 cm *For the use with binoculars an optional tripod adapter (item # 1916000 or 1916500) is needed.

Outdoor and sports photographers can’t always photograph in sunny weather - sometimes they may not wish to. The BRESSER BR-RC15 rain cover protects SLR cameras and (telephoto) lenses against rain and snow as well as sand, salt, dust and dirt. The viewing window provides a clear view of the display and control buttons, which can be easily accessed via the side openings. This camera rain cover is designed for use with DSLR cameras and lenses with a maximum length of 25 cm. The cover can be easily adjusted to the size of your lens. IMPORTANT The rain cover must be left to dry before being stored. The rain cover must only be cleaned with water. Hot water or steaming is not recommended. FEATURES Waterproof rain cover Viewing window for clear view of the display Easy access to camera control buttons Designed for DSLRs with lenses up to 25 cm in length WHAT’S INCLUDED Rain cover for SLR cameras Elastic hook and loop fastener