- Studio flash set 3 x 200 W with tripods and softboxes
- Colour temperature: 5,300 - 5,600 K, 75 halogen modelling lamps
- Adjustable power, max. charging time 1.8 sec
- Tripod height: up to 200 cm, softbox dimensions: 50 x 70 cm
- Included: studio flash, tripods, softboxes, lamps, flash tubes
Currently not available
This flash has a Bowens-S bayonet connector, so you can use a lot of standard accessories from BRESSER with the BRT-210B. Thanks to the fast recharge time of 0.5 to 1.8 seconds, the flash is ready for use. The housing is very robust and the 75 W halogen lamp can be switched on and off.
The rear of the BRT-210B is equipped with a clear user interface and a special protection ensures that the flash does not overheat even in long-term use. The settings can be easily and quickly adjusted using the control buttons. The BRESS-BRT-210B studio flash is suitable for product and portrait photography.
FEATURES
- Flash output of 200 watts per second
- Adjustable from 1/16 to full power
- Charging time from 0.5 to 1.8 second
- 75 W halogen setting lamp - fully on or off
- Color temperature: 5300 - 5600 K
- Bowens-S bayonet connection
- Comprehensive user interface
- overheating protection
- 3 x studio flash BRESSER BRT-210B
- 3 x tripod 200 cm
- 3 x Softbox 50 x 70 cm
- 1 x flash sync cable
- 3 x adjustment lamp 75 W
- 3 x flash tube 200 W
- 3 x power cable
- 3 x replacement fuse
Batteries included: | No |
---|---|
Colour: | black |
Flash counter: | No |
Flash lamp: | No |
LED modelling lamp: | No |
Lamp included: | No |
Light source replaceable: | Yes |
Material: | Aluminium , Polyester |
Metal reflector: | No |
Overheat protection: | No |
Photo cell: | No |
Product series: | BRT series |
Protection cap: | No |
Synchro flash cord included: | No |
Tilt head with tripod connection: | No |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- Risk of overheating! Ensure adequate air circulation.
- Avoid moisture! Do not use the device in damp or wet environments.
- Risk of burns! Lamps can become hot allow them to cool fully before replacing.
- Electrical safety! Use only the recommended power source and regularly check cables for damage.
- Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
- Fire hazard! Keep flammable materials away from lighting.
- Eye protection! Do not look directly into the lamp to avoid eye damage.
- Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
- Store dust-free! Keep in a dry and clean place.
- Follow intended use! Use the device only for its designated purpose and according to the instructions.
- Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
- Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
- Safe transport! Pack the product carefully to minimise damage during transit.
- Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.