Tripod capable of supporting up to 12 kg for cameras, binoculars, and spotting scopes with a handy fluid pan/tilt head, built-in bubble level, and interchangeable screws
- All-in-one tripod suitable for cameras, binoculars, spotting scopes, and astronomy binoculars
- Up to 12 kg high-capacity tripod for extreme stability with Pro Fluid Pan-and-Tilt Head
- Minimum working height: 78 cm - maximum working height: 216 cm
- Dimensions: 82 x 17 x 17 cm / weight: 3,788 g
- Scope of delivery: tripod, ball head, handle, carrying bag, 1/4" and 3/8" screws
True art of living consists in seeing the wonderful in the everyday. (Pearl S. Buck)
Table of Contents
1. The History2. The Features
2.1 The Key Figures
2.2 The Magnification
2.3 The Objective Diameter
2.4 The Exit Pupil
2.5 The Twilight Factor
2.6 The Brightness
2.7 The Interpupillary Distance
2.8 The Eye Relief (Focal Point of the Eyepiece)
2.9 The Field of View
2.10 The Focus
2.11 The Rubber Armor
3. The Glass
3.1 The Coating
3.2 The Glass Material
3.3 Porro or Roof Prisms
3.4 Achromats
4. Types of Binoculars
4.1 Binocom or Nautic
4.2 Night Glass or Night Vision Device
4.3 Residual Light Amplifiers
You might be interested in this!
Entdecken Sie unsere Ratgeber!
This all-round tripod by BRESSER features aluminium alloy tripod legs and a fluid head with a 70 mm diameter base. The four-piece legs are locked with a quick-lock swivel system. The base of the ball head is equipped with a 3/8" mounting thread. For panning and tilting the ball head, the supplied handle is used. This handle can be mounted on the left or right side. Also, the handle can be adjusted in length with a minimum length of 26 cm and a maximum length of 35 cm. The desired length can be fixed with the handle extension lock. The folded tripod has a height of 82 cm and can be extended to a height of 184 cm. If you also extend the centre column, you reach a maximum height of 216 cm. The minimum working height of the tripod is 78 cm. If you spread the legs to their maximum, the minimum working height is 62 cm.
The tripod head allows 360-degree swivels and tilts from +90 to -70 degrees. The quick release plate is universal and features a standard tripod connection (1/4" screw) and a 3/8" screw that allows you to easily mount any camera, binocular adapter, spotting scope or astronomy binocular on the tripod head. Thanks to the built-in level, you can also see if your tripod is level. The unused screw can be turned into the appropriate compartment on the tripod head so that it does not get lost and is always at hand. The quick release plate is secured by a safety device.
The tripod with fluid head weighs 3,786 grams. The center column has a hook that helps to ensure stability. For example, use a sandbag, water bag, backpack and even rocks in a bag to improve balance. A carrying bag is included for easy storage and transportation.
FEATURES
- Very sturdy all-in-one tripod
- High quality construction
- Fluid Pan-and-Tilt Head
- Folded length: 82 cm
- Minimum working height: 78 cm (tripod legs normally spread)
- Minimum working height: 62 cm (tripod legs spread to the maximum)
- Maximum working height: 216 cm
- Tripod load capacity (as a set): 10-12 kg
- Load capacity ball head: 10-12 kg
- Tripod load capacity: 20 kg
- Tripod and ball head weight: 3,786 grams
- Level
- Height adjustable central column
- Hook for counterweight
- 1/4" and 3/8" connection
- Carrying bag
SCOPE OF DELIVERY
- BRESSER BX-10 Pro Tripod
- BRESSER BX-10 Pro Fluid Pan-and-Tilt Head
- Fluid Pan-and-Tilt Head handle
- Quick Release Plate 50 x 92 mm
- 1/4" screw
- 3/8" screw
- Carrying bag with pocket
Colour: | black |
---|---|
Material: | Aluminium |