BRESSER Camera adapter 23.2mm / c-mount

Enter the world of astrophotography now. With the new BRESSER HD moon and planet camera with ST4 autoguider function. This camera is very good for astrophotography with short exposure times, i.e. for celestial objects like the moon, planets or star clusters. For astrophotography with long exposure times for low light deep sky objects, like galaxies and gas nebulae, we recommend the BRESSER Full HD Deep-Sky Camera (Art. No. 4959050) instead, with it's even higher resolution and sensor sensitivity. Equipped with the new high-sensitivity SONY IMX225 CMOS colour sensor, the BRESSER HD moon and planet camera delivers amazing image results with very short exposure times, even with simple telescope equipment. In addition, this ultra-modern camera can also be used as an autoguider, e.g. to actively track the main imaging device with SLR or CCD astro camera. A universal CMOS colour camera that delivers super-sharp lunar and planetary images in particular. The particularly low noise level of this new chip generation from SONY, ensures an exceptionally high brilliance and no cooling is required. Due to the high native pixel resolution of 1280x980, together with suitable telescopes, very beautiful images of the moon, but also detailed planetary images are possible. The ToupSky pro software included in the scope of delivery not only offers the necessary basic functions for image and video recording, but also many helpful special functions for image post-processing and for setting up the Guider. Functions such as live image display, exposure settings, white balance, dark image capture, stacking, timelapse recordings and much more can be individually configured. Especially the very sophisticated software makes it really easy for you to get started in astrophotography. With the automatic settings, you can produce absolutely presentable results without much prior knowledge. If you wish, simply switch off the automatic settings and gradually venture into the individual professional settings. Connect the camera directly to the ST4 connector of your telescope mount and you have fully automatic tracking control. This makes long exposures of several minutes possible without the stars producing unwanted line marks due to the ever-present synchronisation fluctuations of a telescope mount. A corresponding ST-4 connection cable is even included with the camera. Due to the high light sensitivity of the camera, you will always find a suitable guide star even with very short exposure times. For connection to guide tubes or off-axis guiders, the camera has a 1.25" plug-in sleeve, 1.25" filter thread (M28.5x0.6) and C-mount thread (1 "x1/32"). IMPORTANT NOTES: This is not a stand-alone guider camera. You always need a Windows 10 / 11 computer to take pictures and for autoguiding. The autoguider software is not included. You can use PHD2 Guiding, Guidedog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid). DOWNLOAD PHD2-Guiding: https://openphdguiding.org/ DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html DOWNLOAD latest camera software and drivers: http://www.touptek.com/download/showdownload.php?lang=en&id=2 SPECIFICATIONS Camera type: BRESSER / Touptek GPCMOS01200KPF color Sensor: SONY IMX225 CMOS colour Image and video size: Full HD 1280 x 960 pixels (video 30-54,4 FPS) Native sensor size in pixels: 1280 x 960 Exposure times: 102ms to 16min Binning: YES, 1x1 and 2x2 Megapixel: 1.2 MP Sensor size in mm: 4.8 x 3.6 Pixel size: 3.75 µm x 3.75 µm Bit depth: 8/12 switchable ST-4 Compatible Autoguider: YES CNC milled housing made of aluminum Protective strap on the camera housing Camera tube diameter: 1.25 inch (31.7 mm) Camera connection thread: C-mount + 1.25 "filter thread Computer interface: USB 2.0 C-mount extension tube with 1.25 inch filter thread included No IR cut filter installed Operating system: WINDOWS 10 + 11 ASCOM and WDM driver included Field of view for different focal lengths in mm (given in arc minutes): 400 mm - 41,2'x 30,9' 500 mm - 33'x 24,7' 600 mm - 27,5'x 20,6' 700 mm - 23,5'x 17,7' 800 mm - 20,6'x 15,4' 900 mm - 18,3'x 13,7' 1000 mm - 16,5'x 12,4' 1250 mm - 13,2'x 9,9' 1500 mm - 11'x 8,2' 1750 mm - 9,4'x 7,1' 2000 mm - 8,2'x 6,2' SCOPE OF DELIEVRY HD camera C-mount adapter USB 2.0 PC connection cable with a length of 180cm Interface cable for ST-4 autoguider port with 150cm length Dust cap for camera tube Software CD

The BRESSER SLR camera adapter 2x T2 functions as an adapter between a microscope and a reflex or system camera. A camera-specific T2 ring is required for operation. This adapter is suitable for common microscopes with a 23.2 mm connection. Depending on the setup, you can achieve a parfocal image with a trinocular microscope. As with other adapters, the visible field of view remains smaller than the ocular field of view. FEATURES 23.2 mm plug connection T2 thread Integrated lens with 2x magnification SCOPE OF DELIVERY Camera adapter

The BRESSER Photo Adapter 30.5 mm / C-Mount is designed to establish a connection between the 0.5x Reducing lens (Art.-No. 5914005) and the C-Mount MikroCam Adapter (Art.-No. 5942101). Thus a larger image field as well as a higher light intensity can be achieved with a MikroCam. FEATURESC-Mount Female ThreadPlug-in Mount: 23.2 mmSuitable for 30.5 mm Eyepiece Holder SCOPE OF DELIVERYPhoto Adapter 30.5 mm / C-Mount

The MikroCam MINI Full HD HDMI is a very compact HDMI camera. No PC or laptop is needed to use it, simply connect to a monitor, TV, beamer or smartboard. This makes the camera especially suited for teaching. As a plus, you can also mount the BRESSER HDMI display (item no. 5914120) directly on the camera.Connection via HDMI is easy and the camera is ready to go instantly. No software installation, PC setup etc. is necessary. The lossless data transfer ensures a good image quality and the image is lag free and with a constant high framerate of 60fps. This is especially helpful when digitizing a microscope workplace in QC or production.With the included mouse, you can control the camera via 3 distinctive on screen menus (camera control, settings, measurements). To calibrate measurements, please add a calibration slide (e.g. item no. 5916720).The camera is well suited for presentations, lectures etc. because upon startup it is working directly in auto mode with no user input. The camera does not have a start button, it is working directly after power up. Menus and mouse icon are not visible if the mouse is not connected. Please note that this camera does not allow direct PC connection via USB. The USB port is for the mouse input only.FEATURESHDMI connection for monitor, beamer or smartboardc-mount adapter thread enables connection to various microscopes (independent of brand / manufacturer)with SD card slot (SD card not included)no PC or laptop necessarySCOPE OF DELIVERYMikroCam MINI Full HD HDMI with c-mountAC adapter (12 V / 1000 mA), EUUSB mouseHDMI cable (length appr. 1.5 m)

The BRESSER BioScience is the perfect instrument for laboratory use. The size and ergonomic design is perfect for prolonged use. The Köhler Illumination System provides a brilliant image quality. The trinocular tube will connect a MicroCam or other C-Mount microscope camera directly with the optional C-Mount adapter 5942101. An optional adapter (5942100) for DSLR and system cameras is also available. The standard bright field illumination (30W halogen) ensures a pleasant and differentiated colour rendering and is also bright enough for contrasting method like phase contrast and dark field (optional)FEATURESKöhler Iluminatorseparate AC-adapter, for high safetycoaxial mechanical desk with nonius scalecoarse and fine focusing Eyepiece: 2x WF 10x/18 (23 mm diameter)4 Objectives with DIN 4x / 10x / 40x / 100x (oil) magnificationType of objective: AchromaticAbbe N.A. 1.25 CondenserIllumination: 12V/ 30W halogen with dimmerSCOPE OF DELIVERYmicroscopedust cover2x eyepiece4x DIN objectives1x condenserimmersion oil230V power supply (12V/ 3A)