BRESSER Carbon Slider 100cm

A dream for every photographer and video designer with a studio! Finally, no more tripping over cables or lamp stands - with the BRESSER CR-1 ceiling rail system, you have everything under the ceiling, with a lot of freedom of movement and more fun at work.Whether for professional open-plan photo studio or small room - with little space for a lot of photo studio equipment, the BRESSER ceiling track complete set offers the perfect solution for simplified work in the photo studio and also video studio. The four pantographs with spigot connection for mounting photo studio lamps or photo studio equipment provide absolute flexibility in lightning control. Smooth-running carriages allow the pantographs, which can be loaded up to 5 Kg, to be moved to the desired position with a stepless extension of max. 200 cm. The lower runners can be moved along at an angle and also back and forth by means of the sturdy double runners.Free working in the photo studio without disturbing factors on the floor, such as lamp tripods, is achieved by the stable BRESSER ceiling rail system not only throughspace-saving mounting on the ceiling, but through the practical cable trolleys. This also prevents power cables from hanging down.The BRESSER ceiling rail system for mounting various studio lights is not only ideal for product photography, but is also popular in portrait photo studios and video studios.Of course, the mounting accessories are included in the set and if that is not enough, you can expand the system with our optionally availabe accessories and thus individually adapt the size to the conditions.PROPERTIESComplete set for 4 lamps or accessoriesSpace-saving for ceiling mountingNo disturbing power cables and light stands on the floorFlexible working due to sliding and extendable pantographsExtension range of the pantographs from aprox. 40 - 200 cmPantographs can be loaded up to max. 5 kgSmooth-running cable trolleys5/8 inch spigotExtendableSCOPE OF DELIVERY2x Double rail2x Single rail4x Double carriage4x Single Trolley4x Pantographs with safety wire rope4x Spigot adapter4x Cable trolley1x Mounting kit1x Stopper set (16 pieces)

A strong and versatile camera flash bracket with tripod connection and S-Bayonet adapter for numerous flash accessories such as snoots, reflectors or softboxs. The bracket has a  length adjustable flash shoe to attach the camera flash. Thanks to the tripod connection with tilt head you can put and align the camera flash comfortably onto a light stand. The flash bracket is also equipped with an accessory adapter which allows to place various flash accessories of different brands in front of the camera flash  as long as they dispose of a S-bayonet connection. FEATURESuniversal flash bracketstudio umbrella connectiontripod connection with tilt headBowens S-bayonet connectionSCOPE OF DELIVERY1x flash bracket1x spigot adapter (1/4" female, 3/8" female)1x S-Bayonet adapter ring1x accessory shoe with 1/4" thread1x storage bag

A light and stable carbon slider with a connection for the photo / video camera. The camera slides gently and soft, without shock or vibration along the track. For perfect shots such a rail is important. The height can be customized. Optionally, a ball head can be used to precisely align the camera. The Carbon Slider can also be used on a camera. Scope of delivery:Carbon slidercamera connection

The BRESSER BR-600 MB 36W Bi-Color LED Studio area light scores not only with a slim and robust design, but also with various colour, power and power supply options. All settings can also be easily made with the 2.4 GHz remote control.Flexible working, whether in the photo studio or video studio or on location, is offered by the BRESSER BR-600 MB 26W Bi-Color LED Panel simply by the possibility of connecting an additionally available NP-F battery.The LED surface area luminaire is equipped with barn doors that ensure optimum light alignment. The colour temperature can be continuously adjusted to the ambient light from 3200 to 5600 K to create a balanced lightning atmosphere. With a CRI value of 95+ and a light output of 4320 lumens, the BRESSER BR-600 MB adapts to any ambient light and is dimmable in light output from 10 to 100%. In addition, it can be stored in a spae-saving manner in the supplied carrying bag.PROPERTIESSlim designPower: 36WExcellent heat dissipation2.4 GHz wireless remote control with 99 channelsColour temperature adjustable from 3200 - 5600KLight output of 4320 lumensFitted with 600 LEDs, 45 of which are Ultra Bright 5 LEDsDimmable from 10 to 100% of outputCRI value of 95 +SCOPE OF DELIVERYBRESSER BR-600 MB 36W Bi-colourWireless 2.4 GHz remote controlMains adapterDiffuser filterFlapsCarrying bag

The BRESSER Slider Binocular Mount, with its revolutionary design, offers unprecedented comfort for binocular observation - during the day and at night Thanks to the variable extension length of the two support rails (crossbars), the cardanic mount head and various adjustable slip couplings almost all binocular positions can be selected easily. Afterwards, the binoculars remain in their respective position thanks to the counterweights. During observation, it is usually not necessary to touch the binoculars. Whether you want to observe standing up, sitting on a swivel chair or lying down on a mat or bed, everything is possible. For wheelchair users the mount is also an interesting alternative to normal tripod solutions, where usually one tripod leg is always in the way. A steady image despite large binoculars and high magnification Especially when observing for a long time, even medium-weight binoculars weighing 500 grams or more and moderate magnifications of 10x or more make life difficult. Already after a short while the pictures blur and the arms get tired. Certainly, a high photo tripod can bring a significant improvement. But this solution is very limited in terms of the binoculars’ movability and the position of the observer. The BRESSER Slider Binocular Mount offers far more possibilities. Almost all desired binocular positions can be reached effortlessly. The patented design, with 2 counter-moving support rails (crossbars), is guided on special linear roller bearings inside the mount head with zero play. This allows the observer to vary the extension length as desired with little muscle power. The sliding resistance can be infinitely adjusted using 2 adjusting screws. In the middle of the slider mount’s centre of gravity, there is an axle with adjustable slipping clutch for the tilting and rotating movement. All bearings operate with absolute precision and backlash-free. For quick levelling, there is even a 30 mm fluorescent circular bubble in the base of the mount, which is easy to read even in the dark. Cardanic mount head The cardanic mount head works like a ball head. However, it offers a significantly higher load-capacity and more stability. Here, too, the sliding resistance of all moving parts can be adjusted to the user’s specific needs. The mount head offers several mounting holes for mounting a binocular holder via 1/4-inch photo screw or a standard GP prism clamp for mounting small telescopes. In addition, there are various holes on the side cheeks of the mount head for further accessories such as red light reading lamps, smartphone holders for the use of sky apps or LED viewfinders for quick sighting of celestial objects. Counterweights Several counterweights enable the exact balancing of the binoculars or telescope. Two counterweights of each 2.5 kg, 1.25 kg and 0.5 kg are included in the package and can be attached to the rear end of the mount on the mounting bolts on both sides. With the 2 included spring clamps the weights are secured on the bolts. Instead of the counterweights, a filled sandbag can also be attached to the existing mounting hook. This reduces the transport weight for planned excursions. Suitable for use with binoculars of up to 3.5 kg weightThe BRESSER Slider Mount can be used with binoculars of up to 3.5 kg weight. But it is also a real help for obtaining blur-free images with much smaller binoculars during long-term observations. It is mounted with an optionally available binocular tripod adapter, which is attached to the mount head with a 1/4-inch photo thread screw. Also highly recommended for compact refractor telescopesInstall an optionally available standard GP prism adapter on the mount head and use your travel telescope in a completely different way: as a high-quality spotting scope for landscape and sky observation. Tripod adapter The matching tripod adapter for using the optionally available BRESSER stainless steel Tripod ST-3 (item no.: 0114310) is already included in the slider mount’s scope of delivery. It converts the standard large 3/8-inch photo tripod thread (internal thread) in the base of the slider mount into a metric M10 thread. This means that after removing the adapter, a stable standard photo or video tripod with 3/8-inch mounting screw can also be used.GETTING STARTED VIDEO:  https://www.youtube.com/watch?v=AhJm3Cl1e9IFEATURESBRESSER Slider Binocular Mount without Tripod Enables comfortable and fatigue-free binocular observation Suitable for landscape and sky observation Shake-free and steady images at day and night Almost infinitely rotatable and swivelling cardanic mount head Supports binoculars and telescopes up to 3.5 kg weight Various observer positions are possible: standing, sitting and lying down Also a practical alternative to a photo tripod for wheelchair users Adjustable viewing height from approx. 30 cm to 170 cm (when using the BRESSER tripod, item no. 0114310)Dimensions when fully assembled: 125 x 35 x 180 cm (when using the BRESSER tripod, item no. 0114310)Total weight mount head incl. accessories: 14.5 kgWeight of mount head: 6 kg  Large 30 mm fluorescent circular bubble in the mounting base Mounting holes for further optional accessories available Several balance weights include: 2x 2.5 kg, 2x 1.25 kg, 2x 0.5 kg Adjustable friction clutches on all movable axes All surfaces high quality painted, powder coated or anodised Precise small series production - manufactured in the EU (Hungary)SCOPE OF DELIVERYSlider mount (binoculars + tripod not included)Tripod adapter 3/8 inch to M10 thread Balance weight 2.5 kg (2 pieces) Balance weight 1.25 kg (2 pieces) Balance weight 0.5 kg (2 pieces) Locking device for counterweights (2 pieces)

The computer-controlled refractor telescope is a wide-field-lens telescope that goes with you almost anywhere, due to its compact design. Take it with you wherever you go, whether you're hiking, camping or on vacation. Perfect for beginners: the telescope includes an easy-to-use go-to system. The computer-controlled refractor telescope can be operated on a desk or with the included tripod. It will show numerous craters on the moon, the cloud belts on Jupiter and Saturn's rings. These are just the beginning of what can be seen with this telescope. The hand control computer of this telescope solves the beginner's biggest challenge: aligning the telescope with the night sky and finding celestial objects in the vast, starry firmament. The menu navigation of the hand control computer is also multilingual and offers the settings of German, English, French, Spanish and Italian.FEATURESRefractor telescope for beginnersThanks to its compact dimensions also ideal as a travel telescopeComputer control for automatic finding of celestial objectsSCOPE OF DELIVERYRefractor telescope 70/350Aluminium tripod with accessory trayGOTO handcontrolEyepieces (10 and 20 mm)Moon filterRotatable star mapCompas with integrated bubble levelAstronomy software (download)6x Mignon AA batteries are required for operation of the motor - not included!