BRESSER Carry Case Deluxe for MCX102/127 GoTo telescopes

The Deluxe carrying case plus the tripod bag in a set - the perfect solution for protecting your expensive equipment.​The Carry Case Deluxe is exactly suitable for BRESSER MESSIER MCX102/127 GoTo telescopes and offers reliable protection for your equipment. This is a high quality version made of aluminium with reinforced steel edges. A sturdy carrying handle and metal fasteners withstand even the toughest outdoor use.Also included is a sturdy and padded transport bag made of nylon for the field tripod plus accessories tray of the BRESSER MESSIER MCX-102/MCX-127 GoTo telescopes. FEATURESsuitable for BRESSER MESSIER MCX102/127 GoTo Telescopescase cut-outs for the telescope and accessorieshigh-quality aluminium case design with reinforced steel edgessturdy metal handles and fasteners on casereliable protection of the telescope and accessoriesDimensions of carry case: 620 x 410 x 290 mmweight of case: 6,7 kg ; color: silversturdy and padded nylon tripod transport bagprotects the tripod plus accessory tray during transportfor BRESSER MESSIER MCX102/127 telescope tripodswide shoulder strap with quick-release fasteners includeddimensions of softbag: 700 x 300 x 300 mmweight of softbag: 0,5 kg ; colour: light-greenSCOPE OF DELIVERYtransport case Deluxe (1 piece)transport bag (1 piece)

Sturdy and padded transport bag made of nylon for the field tripod plus accessories tray of the BRESSER MESSIER MCX-102/MCX-127 GoTo telescopes. FEATURESsturdy and padded nylon tripod transport bagprotects the tripod plus accessory tray during transportfor BRESSER MESSIER MCX102/127 telescope tripodswide shoulder strap with quick-release fasteners includeddimensions: 700 x 300 x 300 mmweight: 0,5 kg ; colour: light-green SCOPE OF DELIEVERYtransport bag (1 piece)

Your telescope is much more than an observation aid. It is your personal pathway to the stars, and protecting it while it is in storage or transit should be a priority. Designed specifically for the ED127, ED127CF, AR127s and AR152s, this soft-sided carrying case offers that ideal combination of protection and portability. Inside, the light gray colored nylon features multiple adjustable velcro compartments designed to carefully cradle and easily organize your scope, eyepieces and accessories. The padded polyester outer shell has reinforced back and sides, a shoulder strap with Explore Scientific embroidered logo pad and hand straps for grab-and-go convenience. The case's interior measurements are 110 x 29 x 20 cm. Weight is 1,8 kg.FEATURESSoft-sided carrying caseProtection and organization of your scope and accessoriesIdeal combination of protection and portabilityMultiple adjustable velcro compartmentsShoulder strap with Explore Scientific embroidered logo padNo shifting between compartmentsReinforced back and sidesKeeps the contents safe Interior measurements are 110 x 29 x 20 cm, Weight is 1,8 kgExterior measurements are 115 x 34 x 24 cm SCOPE OF DELIVERYaccessory soft case with protective dividers

NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.The MESSIER MCX-102 telescope is your own small observatory with GoTo computer control. Easy to operate, easy to transport and universally use.  Observe moon, planets, galaxies and nebulae through the proven BRESSER Maksutov-Cassegrain optics. The main features of this optics are a sharp and high-contrast image, as well as the very compact and sealed tube design. An all-round telescope for all fast spotting lovers ! Goto systems play an important role in the world of amateur astronomy as they ensure that users spend less time searching for celestrial objects and more time observing and photographing. The BRESSER Messier GoTo control, allows you to operate your telescope with the included computer handbox. After entering the basic data such as date, time and location, at least 1 known reference star is approached and confirmed. Afterwards, you can choose your favourite objects from the integrated database and let the MCX telescope move to and track them automatically. It couldn't be simpler! One of the outstanding features of the MCX telescopes is the very solid fork mount made of die-cast aluminium and the universal field tripod made of stainless steel. Both guarantee a safe stand and as little unwanted vibrations as possible during observation. In addition, the drives in both axes are equipped with precision ball bearings and precision worm gears made of steel and brass. This ensures smooth and quiet star tracking. Adapt your smartphone camera directly behind the SPL26mm eyepiece using the included smartphone holder or mount your camera on the M35 threaded connector and take astro photos of the moon and planets. The 90° flip mirror at the back of the telescope allows a quick and comfortable change between using an eyepiece or a camera.  You'll be amazed at what this MCX telescope can do with little effort.When it comes to tracking the stars with a telescope or camera, there is nothing comparable to the precision of a German equatorial or parallactic mount. It is important to follow the objects as precise as possible when they rise in the east and sink in the west. For observers it is very easy to keep their celestial object in the middle of the eyepiece for a longer time with a German equatorial/parallactic mount. This possibility of setup  (EQ mode) is already included in your new MCX telescope. The so-called polar wedge on the tripod head can be tilted accordingly and adjusted to the latitude of your location. You can therefore quickly switch between these two types of installation (AZ/EQ) - without having to buy extra accessories! Also a fast use of the MCX telescope without tripod only as a table device is possible !  This telescope combines so many good characteristics that the purchase is really worthwhile. You will be inspired! FEATURES Universal and compact entry-level telescope with GoTo function Easy operation and transport High-resolution and proven BRESSER Maksutov-Cassegrain optics Aperture diameter: 102mm , focal length 1470mm FMC fully coated optics for a brighter image Solid die-cast aluminium fork mounting with drive motors in both axes Proven Goto control for navigation in the starry sky Computer hand box with very large and illuminated display Multilingual menu navigation in DE, GB, FR, ES, IT Sturdy stainless steel tripod with polar wedge (AZ+EQ mode possible) Can also be used without a tripod as a table-top unit Flip mirror 90° - quick change between eyepiece and camera possible Battery compartment integrated in the base for 8 x AA batteries (Batt. not included) Integrated circular bubble for easy leveling Enlarged primary mirror (116mm) for a brighter image Precise worm gears made of steel/brass in both axes Manual gear clamps in both axes Smartphone holder included for photography through the telescope LED red dot finder with CR-2032 battery included BRESSER Super Plössl eyepiece 26mm (1.25") included (56x) Eyepiece shaft diameter: 31.7mm (1.25") Camera connection thread: M35 x 1 mm External connection for 12 Volt power supply: Yes Adjustable working height on tripod: 105 - 155cm Recommended magnifications: 36x - 204x Telescope for night and solar observationSCOPE OF DELIVERY Optical MCX Tube in Fork Mount GoTo Computer Handbox with Hand Strap Field tripod with polar wedge AZ/EQ Smartphone holder for photography through the telescope BRESSER Super Plössl eyepiece 26mm (1.25") LED red dot finder, objective dust cap, Aperture solar-filterInstruction manual 

Premium, sturdy aluminium case for the BT binoculars.The optical tubes of the BT126SS-A or BT125-A, the eyepieces, the 7x50 mm finder scope and the finder scope holder can be stored together in the case. Up to two 10 to 25 mm eyepieces from the SLV series and one LVW17mm and LVW22mm can be stored together.Note: Old models (20×125, 30×125, 75VP×125) and the HF2 fork mount and tripod cannot be stored in the case. FEATURES Dimensions: 310 x 400 x 820 mm Weight: 8.2 kgDELIVERY CONTENTAluminium case for BT126S-A/BT125S-A

Special transport case for the VSD90SS astrographThis is a hard-shell case that was developed exclusively for the VSD90SS. You can store the VSD90SS tube either without the tube clamp or with the tube clamp attached. When the VSD90SS is stored in the case, there is enough space around the focuser to store accessories for photography.The inside of the case is designed so that the VSD90SS can be used as soon as it is removed from the case. You can store not only the tube of the VSD90SS, but also the tube clamp. There is enough space for accessories on the side of the case facing the eyepiece to make it easier to keep them handy at the observation site. For example, the reducer V0.79x, wide-angle photo adapter 60DX or an electric focuser from ZWO can be stored.The housing of the case is made of lightweight and hard-wearing Plapearl material. The flexible properties of Plapearl allow for a special construction that reduces the weight by more than 30 % compared to an equivalent aluminium case. Thanks to the seamless construction, with the exception of the opening, the housing is also extremely airtight. Plapearl is lightweight, durable, has excellent flexural rigidity and is easy to recover from impact.FEATURESCase material: PlapearlDimensions: 556 x 245 x 256 mmWeight: 2.4 kgSCOPE OF DELIVERYVSD90SS transport caseCustom-fit padding insertsKey 2x

You see better with two eyesThe BRESSER BinoViewer Deluxe makes it possible to observe astronomical objects in a relaxed way with both eyes and with considerably more detail than using one eye. The images created of the moon, planets and globular clusters are particularly impressive. But also with deep-sky objects such as the Orion Nebula the detection of details is much easier. At the same time this binoviewer is very easy to handle. Thanks to the newly patented optical system you can get into focus with any telescope. All you need is a pair of identical eyepieces to enjoy this dramatic and immersive viewing experience.How to use the BinoViewer? Since the BRESSER BinoViewer Deluxe does not require an additional light path (back focus), it can be used with any telescope - including Newtonians and short focus refracting telescopes, which traditionally suffered when using standard binoviewers. No light path corrector or similar accessory is necessary. If a standard 1.25'' eyepiece can be focused, the binoviewer will also work. The eyepiece focal length and field of view size of the eyepieces used are fully retained. As with binoculars one eyepiece is focused first using the telescope focuser. Then the second eyepiece can be brought into focus using the helical focuser on the binoviewer. The required interpupillary distance is then elegantly adjusted to a range of 58–74mm with the help of a linear sliding mechanism, with graduated marker, to help you find your ideal interocular setting quickly.  Self-centring helical eyepiece grips, rather than side-mounted thumbscrew eyepiece retainers are used, decreasing the chance of offsetting collimation of both eyepiece to each other.  The fact that this design of binoviewer uses a well-engineered linear slide mechanism to adjust interpupillary distance, rather than a cheaper-to-produce traditional hinged design also helps retention of collimation.Which objects can be observed with this accessory?Actually, all objects that were previously observed with the telescope in question, but only monocularly with one eye. Because there is no magnification factor at the binoviewer, even low magnifications can be achieved. This makes not only the moon, planets and globular clusters, but also the brighter deep-sky objects very interesting observation targets. The use of two eyes leads to a more relaxed view than using one eye alone.  Although true depth of field viewing at infinity is a little beyond most telescopes and binoviewers, users will note how the human brain attempts to impose depth of field ("3d-like") effects on stereo views through binoviewers.  The biggest difference that most observers comment upon when comparing views through binoviewers like these, as opposed to single monocular eyepiece views, is the extra detail that can be seen in most observable targets.  Relaxed viewing and extra detail in objects are the two main benefits of binoviewing, which the BRESSER Bino Viewer Deluxe 1.25'' delivers in abundance.Also ideal as an accessory for solar telescopesA very special application is the use of the BRESSER BinoViewer Deluxe in combination with all solar telescopes. The spherical shape of the sun with all its surface details is shown very impressively.  The depth of field effects of seeing filaments silhouetted against the solar surface are particularly enjoyable to observe.Important note: Do not use the BRESSER Binoviwer Deluxe without a suitable solar telescope or a safe solar filter in front of the telescopes objective lens . Otherwise, there is an acute risk of going blind.High-quality mechanics and materialsThe entire BRESSER BinoViewer Deluxe is made of high-quality materials. Except for the outer plastic covers all components are made of anodised aluminium. Particularly remarkable are the low-backlash sliding mechanism for adjusting the interpupillary distance and the precise rotary clamping of both eyepiece adapters. The wide clamping surface holds the eyepieces in place securely and also centres them automatically on the optical axis. The one-sided dioptric adjustment has a backlash-free helical drive and enables the finest corrections. For safe transport a high-quality hard-shell transport case is included in the scope of delivery.Which eyepieces can be used?All eyepieces with a 1.25'' barrel and a field stop of up to 22mm. Depending on the interpupillary distance the outer diameter of the eyepiece housing should not exceed a value of approximately 50 mm.Filter thread 1.25'' availableNo 2nd filter sets are necessary to operate the BRESSER Binocular Approach Deluxe. The desired colour or nebula filter can be screwed directly into the 1.25'' nosepiece. in this configuration, when changing the eyepieces to affect a change in magnification, no swapping of filters is necessary.  Unique mirror-lens system with Ohara (Japan) lanthanum glass material The BRESSER Binocular Viewer Deluxe is equipped with a unique mirror-lens system. This has the advantage of higher light transmission and less color aberration. The resulting image is simply brighter and sharper. To achieve this the exclusive Ohara (Japan) lanthanum glass material has been used and in addition all optical surfaces are equipped with a full multi-layer broadband coating. Finally the beam-splitting mirror has a 99% dielectric coating and completes the excellent optical design.FEATURESEnables binocular observations with all telescopesRelaxed and comfortable viewingThree-dimensional viewing experienceSuitable for all telescopes with 1.25'' eyepiece connectionNo additional light path requiredNo magnification factor at the binocular attachmentEven low magnifications with large fields of view are achievableFor observing moon, planets and deep sky objectsPrecise and robust mechanicsSliding mechanism to adjust the interpupillary distanceDioptric compensation via fine helical driveWide eyepiece rotation clamp with automatic centeringFilter thread 1.25'' (M28.5 x 0.6mm) availableLens and mirror design made of finest Ohara (Japan) lanthanum glass materialAdvanced broadband multilayer coating on all optical surfaces99 % dielectric-coated beam-splitting mirrorHigh-quality hard-shell carrying case includedWHAT'S INCLUDEDBino Viewer DeluxeDust capsCarrying case