3 hygro indicators to check the indoor climate
- Temperature and humidity display
- Display of indoor climate as smiley
- Desk, wall mounting or magnet
- Dimensions: 4,5 x 5,8 x 1,3 cm / Weight: 31 g
- Incl.: 3 Thermo / Hygro sensors, 3 batteries (CR2032), manual
- Thermometer and hygrometer in one!
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor FormFAQ - Frequently Asked Questions
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER ClimaTrend Hygro Indicator 3-piece Set Thermo-Hygrometer"
If for instance the humidity is too low the effects can be burning eyes, chapped lips as well as dry nasal mucosa, which reduces our ability to provide protection against inhaled pathogens.
On the other hand, if the humidity is too high there is a risk of mould formation. This can also be prevented thanks to the indicator.
With the practical 3 piece ClimaTemp Thermo Hygrometer Indicator you now have the control over the room climate in all the rooms you spend most of your time in (e.g. living room, bedroom and children's room).
Next to the exact measured values for the room temperature (C°) and humidity (%) the indicator also shows in symbolic form, whether these values are within the recommended range or if there is a need for action.
FEATURES
- Temperature display in °C
- Air humidity
- Symbolic room climate indicator
- Early prevention of mould
- Mounting type: stand, wall mount and magnet
- 3x Thermo / Hygro Station
- 3x CR2032 batteries
- manual
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- SUFFOCATION RISK! Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a SUFFOCATION RISK!
- RISK OF ELECTRIC SHOCK! This device contains electronic parts powered by a power source (batteries). The device must only be used as described in the instructions, otherwise, there is a RISK OF ELECTRIC SHOCK!
- FIRE/EXPLOSION RISK! Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device and batteries or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
- Risk of material damage! Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device for repair if necessary.
- WARNING! Do not immerse the device in water. Do not expose the device to strong impacts, shocks, dust, prolonged high temperatures, or extreme humidity. This may cause malfunctions, short circuits, or damage to the batteries and components.
- WARNING! Use only the recommended batteries. Always replace weak or depleted batteries with a completely new set of batteries with full capacity. Do not use batteries of different brands, types, or varying capacities. Remove the batteries from the device if it will not be used for a long period!
- WARNING! The manufacturer assumes no liability for voltage damage resulting from incorrectly inserted batteries!