BRESSER CM-1200 Studio Flash with Touchscreen

Currently not available

Product number: F000020

EAN: 4007922015040

WEEE-Reg.-Nr.: DE 34323861

Product information "BRESSER CM-1200 Studio Flash with Touchscreen"

This BRESSER flash of the CM-series is a professional studio flash with a variable adjustable modelling lamp, which is independently of the flash, continuously full light, on/off or proportional controllable. The integrated Sony microprocessor creates a reliable and constant power output. At the back is a comfortable and large touch screen (6x8cm) on which you can fast and easily enter the settings for the studio flashes and modelling lamp. With the help of the optional remote control it is also possible to regulate these values up to a distance of 20m (especially handy if the studio flashes are a bit higher or far apart from each other - then you don't always have to do a lot of running). With the help of the hand control, eight studio flashes can be operated. The integrated slave creates automatically more flashes, if necessary. It can be set on the 1st, 2nd or 3th flash of your camera! Thanks to the strong "twist-click" bayonet connection at the front of the flash, the largest available accessories fit to this flash. It is suitable for amateur as well as for professional photographes and used for school, product and portrait photography. Stylish and suitable rubberized metal housing. Optional, you can operate the CM-1200 with a remote controller!
With a remote controller you are able to operate up to 8 studio flashs like the change of the energy level of the flash and the switching on of the modelling lamp!

FEATURES

Clear and very large LCD touchscreen control panel
Easy operation
Variable adjustable flash output (1/32 to 1/1)
Mortise flashtube, easily replaceable
Modelling lamp seperately adjustable
Intelligent cooling system
Overheating protection during prolonged use
Fast recharge time (1-2 sec.)
Synchronization over long distance (up to 20 meters)
Strong (Bowens) S-Bayonet Connection for accessories
Strong tilt head with tripod connection and opening for screen
Suitable body for sustainable use
Automatic Slave Flash at the 1st,2nd or 3th preflash of the camera flash
Suitabe for many effect accessories

SCOPE OF DELIVERY

Studio flash CM-1200
Protection cap (for transport)
Synchronic flash cable
150W modelling lamp
flash pipe
Tilt head with tripod connection
Power cable

Batteries included:	No
Flash counter:	No
Flash lamp:	No
LED modelling lamp:	No
Lamp included:	No
Metal reflector:	No
Overheat protection:	No
Photo cell:	No
Product series:	CM series
Protection cap:	No
Synchro flash cord included:	No
Tilt head with tripod connection:	No

Produkt- und Sicherheitshinweise

Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact:
www.bresser.de

Warning notes

Risk of overheating! Ensure adequate air circulation.
Avoid moisture! Do not use the device in damp or wet environments.
Risk of burns! Lamps can become hot allow them to cool fully before replacing.
Electrical safety! Use only the recommended power source and regularly check cables for damage.
Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
Fire hazard! Keep flammable materials away from lighting.
Eye protection! Do not look directly into the lamp to avoid eye damage.
Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
Store dust-free! Keep in a dry and clean place.
Follow intended use! Use the device only for its designated purpose and according to the instructions.
Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
Safe transport! Pack the product carefully to minimise damage during transit.
Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.