Monitoring and control of domestic air quality through measurement of CO2 load, air humidity and temperature; all measured values are saved and can be evaluated on the PC
- Carbon dioxide concentration, temperature and humidity
- Carbon dioxide alarm functions:
- Windows software for displaying and saving data
- Dimensions/weight: 107 × 107 × 33 mm / 207 g
- Includes: CO2 air quality monitor, Windows software as download, micro USB cable, power adapter
- LED display
€189.00*
Unfortunately, no longer available
Product number:
13854
Former product no.:
7004040
Note: Our item numbers have been updated.
You can continue to search for products using either the previous or the new item number.
EAN:
4007922071411
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER CO2 Monitor with Data Logger for Air Quality Control INV"
There are many reasons why people keep the windows closed in stuffy rooms: letting in cold air or insects, or simply forgetting to ventilate the room. This can result in elevated CO2 levels. Humidity is not only a concern for plant lovers. Without fresh air, rooms can get very stuffy, especially in closed spaces with lots of people. This can reduce the comfort level and affect your concentration. With the BRESSER INV CO2 meter with an air quality data logger, you can keep a close eye on the indoor climate in your own four walls or in classrooms, offices and other rooms. The device features an easy-to-read LED screen that simultaneously displays the CO2 concentration, temperature and humidity. In addition to current measurements, you can also view trends: trends in your indoor climate can provide important indications of deficiencies in your ventilation habits. The CO2 air quality meter features a recording function for this purpose: simply place the meter in your desired location and view the measured data on your computer. The required Windows software can be downloaded via the link provided.
Flexible CO2 meter - prevents stuffy air
If time is short and indoor CO2 levels are not at the top of your list of priorities, the meter features an alarm function that allows you to set your own CO2 limit. When this limit is exceeded, the alarm sounds to remind you to ventilate the room. When it comes to positioning, the CO2 monitor impresses with its flexibility: simply find the right spot on the wall or place it on a flat surface using the built-in stand so that it is clearly visible. The micro USB cable supplied is used for data transfer to your computer and - in conjunction with the power adapter - for a reliable energy source. Create the perfect indoor climate with the BRESSER INV CO2 meter with an air quality data logger!
FEATURES
DELIVERY CONTENT
Flexible CO2 meter - prevents stuffy air
If time is short and indoor CO2 levels are not at the top of your list of priorities, the meter features an alarm function that allows you to set your own CO2 limit. When this limit is exceeded, the alarm sounds to remind you to ventilate the room. When it comes to positioning, the CO2 monitor impresses with its flexibility: simply find the right spot on the wall or place it on a flat surface using the built-in stand so that it is clearly visible. The micro USB cable supplied is used for data transfer to your computer and - in conjunction with the power adapter - for a reliable energy source. Create the perfect indoor climate with the BRESSER INV CO2 meter with an air quality data logger!
FEATURES
- Simultaneous display of CO2 concentration, temperature (°C / °F) and humidity
- LED display
- Carbon dioxide alarm functions:
- Saves and displays your recorded data via the supplied Windows software
- High precision, high resolution, rapid response time
- Carbon dioxide (CO2)
- Range: 0 ~ 9999 ppm
- Accuracy: ±70 ppm or ± 3% rdg (0 ~ 5000 ppm)
- Response time: 1s
- Temperature range: -10 ~ 70 °C
- Resolution: 0.1%
- Accuracy: ± 0.3 °C (10 ~ 50 °C), other temperatures ± 1.2 °C
- Humidity range: 0.1 ~ 99.9% relative humidity
- Resolution: 0.1%
- Accuracy: ± 3% (10 ~ 90%)
- Logging memory: 12700
- Operating conditions: 0 ~ 50 °C, 0 ~ 85% RH
- Storage conditions: -20 ~ 60 °C, 0 ~ 99%
- Sensor lifespan: 15 years at normal communication frequency
- Storage temperature: -20 ~ 60 °C, 0 ~ 90% RH
- Rechargeable battery: 3.7 V rechargeable lithium-ion polymer battery (exclusively for back-up)
- Dimensions: 107 × 107 × 33 mm
- Weight: 207 g
DELIVERY CONTENT
- CO2 air quality monitor
- Windows software as download
- Micro USB cable
- Power adapter
- Instruction manual
| Assembly required: | No |
|---|---|
| Batteries included: | No |
| Batteries required: | Yes |
| Colour: | black/white |
| Extended warranty (years): | 5 |
| Features: | History data storage |
| Inside temperature (°C) from: | -10 |
| Inside temperature (°C) up to: | 70 |
| Material: | Plastic |
| Measurement function: | CO2 concentration , Humidity (inside) , Inside temperature |
| Net Weight total (incl. accessories) (g): | 267 |
| Net weight (without access.) (g): | 207 |
| Total height (mm): | 33 |
| Total length (mm): | 107 |
| Total width (mm): | 107 |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
- If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
- The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
- CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
- Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
- The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery
Customers also bought
%
BRESSER MeteoTemp Baro HZ Colour Weather Station
€39.99*
€49.99*
(20% saved)
The BRESSER MeteoTemp Baro HZ Colour Weather Station gives you a comprehensive overview of the local weather conditions and your indoor climate. In addition to measuring the temperature and humidity, it also features a built-in barometer and weather forecast function, as well as other practical functions such as automatic time adjustment and an alarm clock.
Weather forecast function with air pressure indicator
Not sure whether to pack an umbrella? The weather station comes with a weather forecast function, which displays the weather forecast using a series of symbols. You can also view the recent air pressure readings from the built-in barometer to give you a better idea of the latest trends in the weather.
Precise temperature and humidity measurements
Thermometer and hygrometer in one device: the wireless sensor has a range of up to 80 metres and takes precise measurements of the outdoor temperature and humidity. It also features a built-in display, which allows you to view the readings directly from your balcony or garden without returning to the base station.
Monitor your indoor climate
Temperature and humidity are also important indoors – especially in rooms where we spend a lot of time such as living rooms and offices. For this reason, the base station features a built-in thermometer and hygrometer so that you can keep a close eye on the current conditions. It also displays a smiley to indicate how comfortable the room is based on the measured temperature and humidity.
Radio-controlled clock, alarm and more
The MeteoTemp Baro HZ colour weather station comes with a radio-controlled clock, which adjusts the time automatically when the clocks change to summer or winter time. It also features an alarm with 2 individually configurable alarm times, and displays a range of useful data, including the sunrise and sunset times and the current moon phase and tide.
Monitor the local weather conditions, indoor climate and more with the BRESSER MeteoTemp Baro HZ Colour Weather Station.
BASE STATION FEATURES
Weather station with integrated thermometer and hygrometer
Measures the indoor temperature and humidity
Displays the outdoor temperature and humidity
Measures the air pressure and displays recent readings
Weather forecast with symbols
Indoor comfort indicator
Large colour display
Automatically sets the time via DCF radio signal
Date and day of the week (choose from seven languages)
2 alarm times and snooze function
Moon phase, sunrise and sunset, tide
Backlight
Supports up to 2 additional thermo-hygro sensors (not included)
Power supply: Mains adapter (included), 3x AAA backup batteries (not included)
EXTERNAL SENSOR FEATURES
Wireless thermo-hygro sensor
Measures the temperature and humidity
Built-in display for viewing measurements
Range: up to 80 metres
Battery operated: 2x AAA batteries (not included)
Can be placed on a table or wall-mounted
SCOPE OF DELIVERY1x Base station with mains adapter
1x Wireless thermometer/hygrometer sensor
Instruction manual
Available
Skip product gallery
Customers also viewed
%
BRESSER CO² Air Quality Monitor Smile
From
€44.90*
Endless meetings, urgent work emails, looking after the kids, cleaning the flat… during our hectic lifestyles, it's easy to forget about regular ventilation. Even though we know better: a high CO2 concentration can affect our health and wellbeing. The BRESSER CO2 air quality monitor Smile will show you when it's time to let some fresh air into your home or office. Simply have a quick look at the intuitive LCD display to keep an eye on the CO2 concentration, temperature and humidity. You don't need to worry about remembering what constitutes a critical carbon dioxide level - the intuitive graphical display with a linear scale and smiley face will show you the quality of the air in your surroundings. The measurements are precise, with high resolution and fast. Ventilation alarmThe practical carbon dioxide alarm reminds you when you need to let in some fresh air. If the default setting is different to your ideal indoor climate, you can configure your own limit up to a maximum of 5000 ppm. The alarm function can then be activated with a simple button press. If the preset limit is exceeded, the alarm will sound at a varying intensity depending on the CO2 concentration. The display will also show a flashing arrow symbol to remind you to open the windows. Humidity is also an important factor, as high humidity levels can cause mould to form. You can also set your own visual alarm for this reading so that you will know whether the air in the room is too dry or too moist. If you want to see more than just the current readings, there is also a practical memory function that displays the maximum and minimum values for the last 24 hours as well as the average values from the last 15 minutes and 8 hours for carbon dioxide concentration, temperature and humidity. The device is powered by a power adapter to enable continuous operation. The BRESSER CO2 Air quality monitor Smile - the perfect solution for busy fresh air fans! FEATURESSimultaneous display of CO2 concentration, temperature (°C / °F) and humidity Colour LCD display, clear and intuitive Graphical display of current CO2 concent Carbon dioxide alarm functions: Humidity alarm function Memory function High precision, high resolution, rapid response time Dimensions: 123 x 110 x 32 mm Powered by power adapter, long-term continuous operation possible DELIVERY CONTENTCO2 air quality monitor Power adapter Instruction manual
Available
