BRESSER D-76 Boom Arm

Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm

A professional, sturdy and stable aluminium lightstand, which can easily be set up. Even with the biggest softboxes it still provides the necessary stability.   By means of a handy mechanism the upper part of the lightstand can be converted into a boom arm. Already included in delivery comes also a cordura sandbag, which can be filled with sand or other materials and attached to the boom stand to serve as a counterweight.In order to reduce unwanted reflections the aluminium is coated with a black powder layer.FEATURESaluminium lightstandbuilt-in boom armexchangeable spigot adapter for attachment of studio accessoriesmaximum height: 500 cmlength boom arm: 290cmheight, folded: 129cmmaximum pipe diameter: 40mmSCOPE OF DELIVERYboom standspigot adapter (1/4" male, 3/8" male)counterweight sandbagcarabinertransport bag with inside compartments for small accessoriesshoulder strap

Your new right hand in the studio: The BRESSER 110-116BM 3 Section Boom Arm scores with its 3 sections and the possibilty to position lamps at right angles. Need a perfect lightning from above? Nothing could be easier, because this boom arm masters even difficult lightning situations in the whole range of video production and photography easily. I supports you in different ways of working: Use it in the possible total length of 245 cm on a tripod with spigot connection, or hold the solidly made boom arm comfortably in your hand with the 2 padded handles and add light formers or microphones. As a boom arm stand, the unit shows its versatility.3 section boom arm: All good things in three!Simply threefold practical: the 3 sections can be adapted to suit the current purpose. But they are not only strong as a team, they also do a really good job separately. The telescopic pole, which is held by a sturdy clamp, brings a particulary high degree of flexibilty to the studio. You can extend the telescopic section from 79 to 153 cm and use it with a spigot connection. The main section can be attached to the variable tilt connection and measures 79 cm. And if things do get heavy: The centre piece with the tilt connection ( gallows) is connected with a clamp into which you can insert 2 sections and screw them tight.This multifunctional extension arm is guaranteed to do a good job in the photostudio and video production, because despite the sturdy construction with a tube diameter of 2,5 cm and 2,8 cm it is a real lightweight with only 1160 g. In addition, the powder-coated aluminium for less relfection is easy to handle. You can ensure the right balance for heavy weight lamps with the supplied conterweight bag. Simply fill the two cpompartments of the bag and with the the practical strap, yu can quickly attach the conterweight to the boom arm.But notice: For maximum stability the conterweight must correspond to the weight of the mounted studio flash or light shaper!You should not exceed the realistic maximum load of 3 to 4 Kg when using the extension arm.PROPERTIESMultifunctional aluminium boom armTelescopic functionHandels for comfortable workingFor photo and video productionLoad capacity from 3- 4 kgCan be used as a boom arm and lamp tripodHigh -quality and stable constructionSCOPE OF DELVERY1x Boom arm with 3 sections and spigot connection1x Conterweight- sand bag with velcro fastener2x Nylon bag for sand