BRESSER Darkfield Condenser dry (Infinity/TFM)

In addition to a diverse selection BRESSER Microscope also offers a wide range of accessories. The dark-field microscopy offers the bright-field microscopy is a special part. A gain is especially strong transparent preparations in contrast. The background is dark here, only the object is illuminated. The aperture is 0.85.This BRESSER Darkfield Condenser (dry) guides the light from the side to the preparation. The dark field condenser provides a strong contrast enhancement of the preparation, especially in highly transparent preparations. This condenser is compatible with the following BRESSER microscopes:Erudit DLX (5102000)Researcher Bino (5722100)Researcher Trino (5723100)TRM 301 (5760100)BioScience Trino (5750600)Science ADL 601 P (5770200)Science ADL 601 F (5770500)

BRESSER offers along the diverse range of microscopes a lot of accessories dedicated to it. The Darkfield microscopy enables a new way to observe your preparations. Especially the contrast of translucent preparations will be enhanced. The background is dark, only the object is illuminated. The aperture is 1.35 (Oil)The BRESSER Darkfield Condenser guides light from the side to the preparation. It provides a strong contrast enhancement, especially at very transparent preparations. The immersion oil delivers defined images even at high magnifications. This condenser is compatible with the following BRESSER microscopes:Science TRM 301 (5760100)BioScience Bino (5750500)BioScience Trino (5750600)Science ADL 601 P (5770200)Researcher Bino / Trino (5722100 / 5723100)Erudit DLX (5102000)Science ADL 601 F (5770500)SCOPE OF DELIVERYDarkfield Condenser (oil type)

The New BRESSER Science Infinity is the new top of the range of the biology microscope series by BRESSER. It is based on infinitely corrected planachromatic objective lenses with superb image quality. Because of the modern design and optics the installation of accessories is very simple and one has many options. The WF 10x eyepieces offer a large visual field of 22mm and are also suitable for spectacle wearers. For protection purposes the eyepieces are rubber coated. The interpupillary distance can be adjusted from ca. 55mm to 75mm. Dioptre adjustments are possible with both eyepieces.The bright and durable LED illumination is dimmable and also very practical for darkfield microscopy*.The Full Köhler illumination is adjustable with the built-in luminous-field diaphragm and the vertically and horizontally adjustable Abbe condenser (numerical aperture 1.25, with iris diaphragm). An imprint of the different possible magnifications on the condenser makes the adjustment of the iris diaphragm very fast and precise.Coaxial pinions drive the stage and focus which enables ergonomic operation of the microscope.The trinocular tube enables the direct attachment of a c-mount camera or MikroCam.SCOPE OF DELIVERYMicroscope with integrated LED illuminationplanachromatic objectives, infinity corrected (4x, 10x, 40x, 100x oil)2x eyepieces (WF 10x)Mains adapterManualImmersion oilDust cover*only with optional accessories

The BRESSER DIN PL Objective 60x, Infinity has a higher quality optics and thus achieves a particularly high resolution of the image. The plan correction ensures an smooth image field (no refocusing between the center and edge of the image field). Therefore especially recommended for photographic applications. This lens is infinitely corrected and specially designed for the BRESSER Science Infinity microscope. SCOPE OF DELIVERY 1 piece 60x planachromatic lens, Infinity

The new BRESSER Nebula 6 EQ/AZ Wifi-Network Mount is a precise and quiet telescope mount – ideal for astrophotography. The controller box offers numerous central connection options for various accessories such as cameras, filter wheels, and motor focusers via USB (2.0/3.0), simplifying the setup of a professional astro-photography machine. BRESSER relies on innovation paired with quality Made in Italy for this top-class product. The long-standing experience of the manufacturer in mount construction guarantees a high-end device with first-class functionality and highest reliability. Additionally, the in-house development team for hardware and software in Italy ensures quick response times in technical support and the adaptation of new device drivers. True to the motto "Professionals at work!" The mount is controlled via pre-installed web app software, accessible via Wifi and an Ethernet cable connection. The philosophy behind the Nebula GoTo system is to provide the user with a control system independent of a normal PC, which can be remotely controlled in all its functions via a smart device such as a mobile phone or tablet. However, this does not exclude the traditional use of computers of all types and brands, which can be connected to the system either wired or wirelessly. The BRESSER Nebula GoTo System Controller is a Raspberry Pi 4 microcomputer, which allows complete control of the setup (mount, camera, etc.) without the need for any other external device. The BRESSER Nebula GoTo system is already equipped with all Linux-based applications necessary for performing all astrophotographic functions.The existing INDI environment allows the control of almost all devices (cameras, filter wheels, rotators, including observatory domes), necessary for conducting local or remote astrophotography sessions. The system also offers high flexibility for users who prefer to use traditional computer client applications such as Cart du Ciel (Star Chart), TheSkyX, SkySafari, Stellarium, and other planetarium programs as well as SGP, Nina, CCD Ciel, and other astrophotography tools. This complete compatibility is ensured through the adoption of the Alpaca communication protocol, which allows the use of traditional ASCOM platform drivers for native INDI devices. State-of-the-art mount construction The BRESSER Nebula mounts are CNC-manufactured from stainless steel and aluminum. The simple and functional design is thanks to a renowned Italian mount manufacturer, who has designed and now also manufactures these fine BRESSER products 100%. So, look forward to a stable yet easily transportable mount, which despite its light weight of only 16 kg (including tripod) allows a high load capacity of up to 25 kg. Visual Observation For visual observation and direct use, control the mount with the hand control box included in the package. Alternatively, connect the Nebula 6 via WLAN directly to your smartphone or tablet and use the virtual hand control box. Of course, all adjustment parameters can also be adjusted via the web application. The user interface is deliberately simple and clear to ensure intuitive operation. Astrophotography Here, the Nebula mount shows its full strength. Whether mobile or stationary, remote capability is crucial. Connect your laptop or PC either via WLAN or with an Ethernet cable (recommended for faster data transfer) directly to the Raspberry-Pi control unit of the mount. Then use the pre-installed software Kstars/EKOS to control the mount and all external devices such as cameras, motor focus, filter wheel, etc. Alternatively, you can also directly control the unit with your own software. Applications such as Cart du Ciel (Star Chart), TheSkyX, SkySafari, Stellarium, and other planetarium programs as well as SGP, Nina, CCD Ciel, and other astrophotography tools can be used without any issues. 2-in-1 Mount with EQ and AZ Mode If required, the Nebula can be switched from the equatorial mode to the azimuthal mode. This is particularly advantageous for observing nature or tracking satellites. Thus, the mount can be used for various applications and is not limited to astronomy only. Attachment of up to two optics Would you like to adapt multiple optics? No problem. Simply use the option to replace the counterweight bar with another telescope. Use the second optic simply as a counterweight to the main telescope. Set the Nebula 6 to azimuthal mode, remove the counterweight bar, and screw on an extension adapter with a suitable second telescope clamp directly to the mount. FEATURES Precise and quiet telescope mount – ideal for astrophotography Extensive connection options for various accessories via USB Integrated web app software enables central control of all components Integrated Raspberry Pi with USB-3 ports and Ethernet port Compatible with client applications such as Cart du Ciel (Star Chart), TheSkyX, SkySafari, Stellarium Compatible with SGP, Nina, CCD Ciel, and other astrophotography tools Virtual hand control box and settings menu for smartphones and tablets PC control – ASCOM and INDI compatible USB ports for cameras, motors, filter wheels etc. Conversion from parallactic to azimuthal mode possible Small hand box for basic functions included High load capacity yet lightweight Mount CNC-manufactured from stainless steel and aluminum Tooth belt drive for precise and quiet tracking Load capacity: 18 kg in EQ mode and 25 kg in AZ mode Dual-prism clamping for the attachment of Vixen GP and Losmandy Weight of the mount: 11 kg Weight of the tripod: 5 kg SCOPE OF DELIVERY Nebula 6 EQ/AZ Mount Field tripod Central control unit with Raspberry Pi Counterweight: 6 kg (1 piece) Basic hand box Connection cables Power supply 230V/12V/3A

The Researcher Bino is a professional microscope with transmitted illumination, equipped with brilliant optics, a robust metal body and precise workmanship. It is perfect for use in school, studies, and occupation. The comfortable binocular head provides an exceptional bright image and can be individually adjusted according to the observer's needs. The objective turret, is fitted with 4 DIN objectives and offers a large variety of magnification possibilities. Focussing is done through the use of the coarse and fine adjustment wheels. The illuminator and the double-lens condensor with iris diaphragm guarantee the perfect illumination of the observed object. Features • Type: Biological microscope • View: Binocular Comfortable binocular view, 360° turnable head • Application range: Biology, Botany, Education, Teaching, Entomology • Illumination: LED Transmitted • Level: Intermediate, Expert • Warranty: 5 years • Double-lens condensor with iris diaphragm • Incl. mechanical stage • Adjustable eye relief Specifications • Magnifications: 1000x max, 40-1000x Zoom • Eyepieces: WF 10x • Eyepiece diameter: 23.2 mm • Objectives: 4x, 10x, 40x, 100x (oil immersion) • Power supply: 220/240V Included Accessories • 4 DIN-objectives • 1x2 eyepieces • Mechanical stage • Condensor • Binocular head • Immersion oil

Are you looking for a compact, lightweight, and versatile tripod for your photography or video projects? The BRESSER TR-672AN Traveler Tripod is the ideal travel companion for anyone seeking quality and ease of use. Thanks to its clever design and sturdy construction, this tripod is perfect for both photo and video applications—and even for lightweight spotting scopes. Stable shooting on any surface The three aluminum tripod legs are individually adjustable and equipped with convenient quick-lock clamps. This allows you to easily set up the tripod on uneven terrain—ideal for outdoor use and travel photography. The minimum working height is 62 cm, and it extends to a generous 170 cm. Precise positioning with 3-way pan head With the multifunctional 3-way pan head, you can position your camera smoothly and accurately. The integrated spirit level helps you take perfectly aligned shots, while the Quick Release plate ensures fast equipment changes—whether it's a photo camera, video camera, or spotting scope. Compact and portable With a folded length of just 63 cm and a weight of only 1.38 kg, this tripod is easy to carry on hikes, excursions, or vacations. Thanks to the sturdy carry handle and the included carrying bag with shoulder strap, transport is especially comfortable. The hook under the center column allows you to hang your camera bag for extra stability. FEATURES Maximum height: 170 cm Minimum height: 62 cm Folded length: 63 cm Load capacity: up to 5 kg Material: aluminum & plastic Weight: 1.38 kg 3-way pan head with spirit level Quick Release plate for fast mounting Individually adjustable legs with quick locks Carry handle & hook on center column PACKAGE CONTENTS BRESSER TR-672AN tripod with 3-way pan head Quick Release plate Carrying bag with shoulder strap