BRESSER DIN PL Objective 20x, Infinity

To enhance contrast according to the refraction index and the thickness of the preparations. The phase contrast set contains four different irises, four different phase contrast objectives (10x, 20x, 40x, 100x oil) and a green color filter. A collimating eyepiece allows easy aligning. This method is especially suitable for non-stained, low contrast samples (epithelium cells, amoeba, white blood cells) and will also help with visibility of bacteria. Therefore it is used in cell culture and life science where color staining cannot be used. One position of the filter holder is free. Thus the phase contrast set can also be used as a brightfield condenser with iris diaphragm. This phase contrast set fits the Science Infinity (item No.: 5760700) microscope. FEATURES Enhanced contrast Planachromatic objectives (10x, 20x, 40x, 100x oil) Infinity corrected objectives Incl. collimating eyepiece SCOPE OF DELIVERY Phase contrast condenser Planachromatic objectives (10x, 20x, 40x, 100x oil) Color filter (green) Adjustment screws (two pieces) Collimating eyepiece

The BRESSER DIN-Lens 20x is an achromatic lens with standard thread to enhance the magnification variety of your Bresser Erudit DLX or Researcher Bino / Trino Microscope. Specifications • Magnification: 20x

BRESSER Planachromat 20x - this DIN-Objectives are processed with the highest quality materials to enhance the image replication.Plan correction minimizes refocus between center and edge of field and is especially useful for imaging.Fits the following models:• Erudit DLX (5102000, 5102060)• Researcher Bino (5722100)• Researcher Trino(5723100)• Science TRM 301 (5760100)• BioScience Trino (5750600)• Science ADL 601 P (5770200) only for observations with transmitted illumination• Science MPO 401 (5780000)Not recommended for models Erudit Basic Mono and Bino (5102100, 5102200) and Erudit MO (5110000) as those have a different parfocal length.

This crosshair micrometer eyepiece enables the measurement of a specimen. The crossed scale facilitates horizontal and vertical measurement without rotating the eyepiece. For optimal visibility, the crosshair is focusable. The barrel diameter is 30 mm, allowing for a large field of view of 22 mm. An additional micrometer slide is required for calibration. Two different measuring slides are available: A measuring scale (Item No. 5916710): 1 mm, divided into 0.01 mm increments. Two measuring scales (Item No. 5916720): 10 mm, divided into 0.1 mm increments, and 1 mm, divided into 0.01 mm increments. This BRESSER micrometer eyepiece is compatible with the following BRESSER microscopes: Science TFM-201 (5750800) Science TFM-301 (5750900) Science Infinity (5706700) Science ADL-601F (5770500) Science ETD 201 (5806200) Science ETD 101 (5806100) SCOPE OF DELIVERY 1x BRESSER WF10x 30 mm crosshair micrometer eyepiece

The NEXCOPE NE620T microscope is designed for a wide range of applications. It features a very high contrast, which ensures an outstanding image quality and resolution. This makes it ideal for demanding and professional applications. LENSES The panchromatic lenses ensure a flat field of view. The 100x lens is resilient to contact and is designed for a water immersion (NA: 1.10). The 40x lens has a very high working distance of 1.5 mm, which prevents contact with immersion fluids. The nosepiece has five positions and is equipped with four lenses (4x, 10x, 40x, 100xW). These feature an M25 thread and a parfocal length of 60 mm. EYEPIECES The eyepieces have a 22 mm field of view. This produces a wide-angle image. The high eyepiece head is ideal for spectacle wearers. A rubber edge provides protection upon eye contact. A dioptre compensation of -5 to +5 can be set individually for each eyepiece. The interpupillary distance can be adjusted between 48 mm and 75 mm. ILLUMINATION The condensor with an iris diaphragm is adjustable and provides Köhler illumination together with the light source, which is also equipped with an iris diaphragm. The powerful 3 W LED has an adjustable brightness and provides the best possible illumination. The brightness can be adjusted individually for each lens. When a lens is changed, the NEXCOPE NE620T automatically adjusts the previous brightness settings. The display shows the currently selected lens and the current brightness. MECHANICS The XY stage is moved via a combination of a toothed rack and tooth belt drive. This enables exact positioning for high magnifications. In addition to the coarse focus, the fine focus helps to render a very sharp image of the object. A full turn of the fine focus moves the table up/down by 0.2 mm. The fine focus can be adjusted with one finger on the right-hand side. The table height limit helps to protect the specimens. The friction of the coarse focus can also be adjusted. CAMERA CONNECTION The NEXCOPE NE620T is specially designed for use with c-mount cameras. You can choose from two different adapters, depending on the sensor size: 0.5x c-mount adapter1x c-mount adapter As the adapter can be adjusted, the camera image can be matched parfocally to the eyepieces. ACCESSORIES (available separately) Dark field Phase contrast Polarisation or fluorescence make the NEXCOPE NE620T microscope suitable for universal use. FEATURES Professional transmitted light microscope Lens type: Planachromatic (60 mm parfocal length) Precise mechanics Very bright illumination 40x lens with higher working distance WHAT’S INCLUDED Microscope stand with four planachromatic lenses (4x, 10x, 40x, 100x) One pair of 10x eyepieces (field of view: 22 mm, plug-in diameter: 30 mm) Dust protection cover Mains cable

The zoom stereo microscope BRESSER Advance ICD is suitable for a wide variety of objects. Because of the Greenough design with two tilted objectives, you can view the sample in 3D. The three-dimensional view is also very helpful when working under the microscope, e.g. when soldering, dissecting or preparing a sample.The precise zoom enables you to view your sample in a wide range of magnifications from 1x to 4x (zoom ratio 4.0). When zooming, only slight refocussing is necessary. To do this, the Advance ICD microscope is equipped with a very precise, coaxial coarse and fine focus. The fine focus is especially helpful when using high magnifications or for imaging. When doing focus stacking with our MikroCam cameras (optional) the fine focus is also a big help.The interpupillary distance of the eyepiece pair is adjustable. Both eyepiece holders are equipped with diopter adjustment, which allows users with bad eyesight to compensate up to 8 dpt. difference between left and right eye. The 10x wide field eyepieces have field number (FN) 22 and are equipped with soft rubber eyecups. The microscope head can be moved on the long rod of the stand, which allows you to observe big samples up to a size of 22 cm.The angle of the bright LED reflected light illumination can be adjusted as necessary. The extra bright and even LED transmitted light provides a flat background when viewing transparent samples. The switch allows you to select reflected light, transmitted light or a combination of both to match your requirements. Brightness is adjustable with the dimmer. The bright light does not heat up, which allows you to observe also living specimens over a longer period of time. The long lasting LED is powered by a 5V AC adapter (EU/UK). The power cable comes with a USB plug.Fully equipped, the Advance ICD covers an exceptionally wide range of magnifications and is therefore suitable for a variety of tasks. Besides the included 2x lens there is also a selection of other auxiliary objectives available. With these, you are able to adjust magnification, working distance and depth of focus according to your needs.Magnifications in basic setting (no optional accessories):10x eyepieces: 10x – 40x10x eyepieces plus 2x auxiliary lens: 20x – 80x20x eyepieces: 20x – 80x20x eyepieces plus 2x auxiliary lens: 80x – 160x(other magnifications are possible when using other auxiliary lenses and/or eyepieces)The third tube is designed to permanently attach a camera. The image of the left eyepiece is diverted to the camera port with a lever/switch. We supply a selection of camera adapters for DSLR, mirrorless cameras and c-mount microscope cameras. This enables you to attach virtually any camera body as long as you have a model with interchangeable lens.APPLICATION RANGEQuality control in industryMaterials scienceLaboratoryBotany, gardening, farmingHydrology, aquaculture, fishkeepingInsects, Entomology, pest controlPlant physiology, raw food materials, medicinal herbsSchools, teachingFEATURESTrinocular head with 2 eyepieces and camera port with switchCompatible with BRESSER MikroCam cameras and others1x-4x stereo-zoom head2x auxiliary lensDiopter adjustment on both eyepiece holdersAdjustable interpupillary distance (52 – 72 mm)Bright LED light (reflected / transmitted)2 different object plates for best contrastView samples of up to 22 cm heightAC adapter Euro/UK (5V / 1000 mA) with USBHeavy build with metal standIncludes 2 pairs of widefield eyepiecesSCOPE OF DELIVERYMicroscope2 pairs of eyepieces (WF 10x / WF 20x)2x auxiliar lens (1 pcs)1 pair of rubber eyecupsObject plate 94 mm (black / white)Glass object plate 94 mm (matte)AC adapter Euro/UK (5V / 1000 mA)Dust coverPrinted manual

Additional objective for Bresser Stereo Microscopes Advance ICD 5804000 and Science ETD-101 5806100With this objectives it is possible to extend the magnification range of the microscope. They are attached in front of the pair of objectives via the M48 thread. Please note that the additional objective will alter the working distance, i.e. the distance between the microscope head and the object that is in focus.Additional objectives with magnifications < 1.0 will raise the working distance. This might be especially helpful when manipulating samples by hand or use of tools is necessary (soldering, engraving etc.). Objectives with magnifications > 1.0 will lower the working distance.Art.Nr. 5941480 0.5 x Magnification Art.Nr. 5941481 0.75 x Magnification Art.Nr. 5941482 1.5 x Magnification Art.Nr. 5941483 2.0 x Magnification