BRESSER Field Tripod ST-3 stainless steel

The BRESSER Slider Binocular Mount, with its revolutionary design, offers unprecedented comfort for binocular observation - during the day and at night Thanks to the variable extension length of the two support rails (crossbars), the cardanic mount head and various adjustable slip couplings almost all binocular positions can be selected easily. Afterwards, the binoculars remain in their respective position thanks to the counterweights. During observation, it is usually not necessary to touch the binoculars. Whether you want to observe standing up, sitting on a swivel chair or lying down on a mat or bed, everything is possible. For wheelchair users the mount is also an interesting alternative to normal tripod solutions, where usually one tripod leg is always in the way. A steady image despite large binoculars and high magnification Especially when observing for a long time, even medium-weight binoculars weighing 500 grams or more and moderate magnifications of 10x or more make life difficult. Already after a short while the pictures blur and the arms get tired. Certainly, a high photo tripod can bring a significant improvement. But this solution is very limited in terms of the binoculars’ movability and the position of the observer. The BRESSER Slider Binocular Mount offers far more possibilities. Almost all desired binocular positions can be reached effortlessly. The patented design, with 2 counter-moving support rails (crossbars), is guided on special linear roller bearings inside the mount head with zero play. This allows the observer to vary the extension length as desired with little muscle power. The sliding resistance can be infinitely adjusted using 2 adjusting screws. In the middle of the slider mount’s centre of gravity, there is an axle with adjustable slipping clutch for the tilting and rotating movement. All bearings operate with absolute precision and backlash-free. For quick levelling, there is even a 30 mm fluorescent circular bubble in the base of the mount, which is easy to read even in the dark. Cardanic mount head The cardanic mount head works like a ball head. However, it offers a significantly higher load-capacity and more stability. Here, too, the sliding resistance of all moving parts can be adjusted to the user’s specific needs. The mount head offers several mounting holes for mounting a binocular holder via 1/4-inch photo screw or a standard GP prism clamp for mounting small telescopes. In addition, there are various holes on the side cheeks of the mount head for further accessories such as red light reading lamps, smartphone holders for the use of sky apps or LED viewfinders for quick sighting of celestial objects. Counterweights Several counterweights enable the exact balancing of the binoculars or telescope. Two counterweights of each 2.5 kg, 1.25 kg and 0.5 kg are included in the package and can be attached to the rear end of the mount on the mounting bolts on both sides. With the 2 included spring clamps the weights are secured on the bolts. Instead of the counterweights, a filled sandbag can also be attached to the existing mounting hook. This reduces the transport weight for planned excursions. Suitable for use with binoculars of up to 3.5 kg weightThe BRESSER Slider Mount can be used with binoculars of up to 3.5 kg weight. But it is also a real help for obtaining blur-free images with much smaller binoculars during long-term observations. It is mounted with an optionally available binocular tripod adapter, which is attached to the mount head with a 1/4-inch photo thread screw. Also highly recommended for compact refractor telescopesInstall an optionally available standard GP prism adapter on the mount head and use your travel telescope in a completely different way: as a high-quality spotting scope for landscape and sky observation. Tripod adapter The matching tripod adapter for using the optionally available BRESSER stainless steel Tripod ST-3 (item no.: 0114310) is already included in the slider mount’s scope of delivery. It converts the standard large 3/8-inch photo tripod thread (internal thread) in the base of the slider mount into a metric M10 thread. This means that after removing the adapter, a stable standard photo or video tripod with 3/8-inch mounting screw can also be used.GETTING STARTED VIDEO:  https://www.youtube.com/watch?v=AhJm3Cl1e9IFEATURESBRESSER Slider Binocular Mount without Tripod Enables comfortable and fatigue-free binocular observation Suitable for landscape and sky observation Shake-free and steady images at day and night Almost infinitely rotatable and swivelling cardanic mount head Supports binoculars and telescopes up to 3.5 kg weight Various observer positions are possible: standing, sitting and lying down Also a practical alternative to a photo tripod for wheelchair users Adjustable viewing height from approx. 30 cm to 170 cm (when using the BRESSER tripod, item no. 0114310)Dimensions when fully assembled: 125 x 35 x 180 cm (when using the BRESSER tripod, item no. 0114310)Total weight mount head incl. accessories: 14.5 kgWeight of mount head: 6 kg  Large 30 mm fluorescent circular bubble in the mounting base Mounting holes for further optional accessories available Several balance weights include: 2x 2.5 kg, 2x 1.25 kg, 2x 0.5 kg Adjustable friction clutches on all movable axes All surfaces high quality painted, powder coated or anodised Precise small series production - manufactured in the EU (Hungary)SCOPE OF DELIVERYSlider mount (binoculars + tripod not included)Tripod adapter 3/8 inch to M10 thread Balance weight 2.5 kg (2 pieces) Balance weight 1.25 kg (2 pieces) Balance weight 0.5 kg (2 pieces) Locking device for counterweights (2 pieces)

Mount and Tripod. The BRESSER Messier beginners series of telescopes. Within this series you find smaller optics mounted stable on the new BRESSER EXOS 1 mount. This combination means more value for money and puts an end to flimsy beginners scopes which discourage most of the beginners due to small, under engineered mounts. The EXOS 1 with a robust stainless steel tripod bears optical tubes weighing up to 7kg stable for visual observation. The optional motor drive for the RA axis makes usage even more comfortable, so there is no need of manual tracking and the object is kept steadily in the field of view.FEATURES Stable parallactic mount with fine drive in both axes Circular bubble level for easy horizontal alignment Stable height-adjustable stainless steel tripod Retrofittable with a tracking motor for the right ascension axis Pole height scale for setting the latitude Scaled graduated circular rings for easier finding of objects by means of star atlas or planetarium software Tripod weight: 4.7 kg Mount weight: 4 kg (without counterweight) Total weight incl. counterweight: 13.2 kg SCOPE OF DELIVERYEXOS 1 German equatorial mountstainless steel tube field tripod1 x 4.5 kg counterweight

Mount and Tripod. The BRESSER EXOS 2 is a rugged mount with high rigidity and precision tracking for visual observation and astrophotography. The tripod is extremely rigid to suppress vibrations really well. This model is very well machined and has an illuminated polar finder scope and precise graduated circles. A powered twoaxis control (BRESSER Exos Duo) or a GoTo-Kit is available as an optional extra. The BRESSER EXOS 2 can take the weight - depending on length and use of up to 13 kg. This allows you to use refractors of up to 152 mm aperture and mirror telescopes of up to 203 mm aperture.CHARACTERISTICS Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Stable height adjustable stainless steel tripod (min. 69 cm / max. 109,5 cm ) Load capacity up to 13 kg payload Retrofittable with the BRESSER Star Tracker Goto Kit ( item no. 4951750 ) Circular bubble for easy horizontal alignment Pole height scale for setting the latitude Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software Pole finder scope with optional illumination ( item no. 4964212 ) Tripod weight: 4.7 kg Mount weight: 5.6 kg (without counterweight) Total weight incl. counterweight: 14.8 kg Batteries: not included SCOPE OF DELIVERY BRESSER EXOS-2 mount Adjustable polar finder scope with optional illumination Stainless steel tube field tripod with accessory tray 1x 4.5 kg counterweight

BRESSER EXOS-2 GoTo Equatorial Mount. Mount, tripod and hand box with computer. This German mount has tracking motors in both axes that follow celestial objects very precisely.The handbox with GoTo works reliable and controls the mount in every situation. Precise ball bearings in both axes ensures minimal backlash at all nine possible tracking speeds.The battery pack (12 V) is conveniently fastened to the tripod shelf and takes eight size "D" batteries.The mount rests on a very tough and rigid stainless steel tripod and can take optical tubes of up to 13 kg. GOTO - Stargazing at the push of a button! The Startracker GoTo System enables beginners to start astronomical observations in just a few minutes, and guides you to objects that are hard to localize through a standard finder scope.Just push the button and the GoTo System will find planets, nebulae or galaxies for you and position your telescope automatically and precise.The GoTo System database includes thousands of astronomical objects.The Messier mount with GoTo System allows you to observe without tedious searching, or image faint objects that are hard to find in a standard finder scope.The BRESSER StarTracker GoTo systems uses servo motors for both axes and features an ST-4 compatible autoguiding input. Guiding aggressivity can be set on the mount itself. The menu navigation of the Startracker Handbox is also multilingual and offers the settings of German, English, French, Spanish and Italian.CHARACTERISTICS MOUNT Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Stable height adjustable stainless steel tripod ( Min. 69cm / Max. 109,5cm ) Load capacity up to 13 kg payload Circular bubble for easy horizontal alignment GoTo Mount with motors and hand box controller, for easy finding and guiding moon, planets, stars and much more ST-4 compatible autoguider interface Pole height scale for setting the latitude Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software Pole finder scope with optional illumination ( item no. 4964212 ) Tripod weight: 4.7 kg Mount weight: 6.7 kg (without counterweight) Total weight incl. counterweight: 15.9 kg Batteries: not included SCOPE OF DELIVERY Equatorial EXOS 2 GOTO mount with stainless steel tripod and Startracker handcontroller Adjustable polar finder scope with optional illumination Stainless steel tube field tripod with accessory tray 1 x 4.5 kg counterweight