- Number of flashes to be set 1x, 5x, 10x or 15x per second
- Adjustable from 1/64 to full
- High quality plug-in flash tube (self-replace)
- Super fast charging time
- Flash duration from 1/800 to 1/10000
- Large LCD display
- High speed button
- overheating protection
- Sensitive photo cell
- Synchro jack-plug connector
- USB to Poort for remote / trigger connection
- Suitable for 2.4G cordless work
- Smart motor cooling
- Auto dump without intermediate flash
- Color temperature 5400K
- LED setting lamp (will not be too warm and long life)
- Attitude against red eyes
- Busser on / off
- Counting the flashes
- Protection against use of too many volts
- Indication Voltage
- Indication of temperature in the housing flash light
- UV protection glass for flash tube
- Integrated handle
- Flash synchronization 1/250 (with trigger set)
- Flash synchronization 1/8000 (with synchronization cable)
The built-in Sony microprocessor provides a reliable and constant power output. On the back is a very comfortable and large touchscreen (6x8cm), on which the setting values for the flashing can be read very quickly and easily. These values can be controlled with an optional trigger / remote control WT-3 or WT-3i up to a distance of 20 meters (very handy if the flash lights are slightly higher or wide apart, then you do not always have to go back and forth). 198 manual flashlights can be controlled with a manual control. The built-in slave provides an automatic co-flashing, this flash light can be adjusted to with-flashes on the 1st, 2nd or 3rd flash of your camera light! Through the powerful "twist-click" bayonet connector on the front of the flashlight, the largest available accessories match this flash. Suitable for the amateur and professional photographer and suitable for the school photographer, product and portrait photographer. Stylish and sturdy metalized rubberized housing.
Optionally, you can control the GM flash lights with a trigger / remote control! With a trigger / remote control, you can set up and trigger up to 198 studioblights.
The USB interface on the studio flash is only suitable for BRESSER WT-3 triggers and receivers. Please do not charge or connect any other technical devices to the studio flash!
SCOPE OF DELIVERY
- Studioblitz light FM-1000
- Protective cap (for transport)
- Synchro flash cable
- 150W LED Adjusting Lamp
- flash tube
- Tilt head with tripod connector
- power cable
- (Without metal reflector)
Product series: | MX series |
---|