Currently not available
FEATURES
- Number of flashes to be set 1x, 5x, 10x or 15x per second
- Adjustable from 1/64 to full
- High quality plug-in flash tube (to be changed)
- Super fast charging time
- Flash duration from 1/800 to 1/10000
- Large LCD display
- High speed button
- overheating protection
- Sensitive photo cell
- Synchro jack-plug connector
- USB to Poort for remote / trigger connection
- Suitable for 2.4G wireless work
- Smart motor cooling
- Auto dump without intermediate flash
- Color temperature 5400K
- LED indicator lamp (will not be too warm and long life)
- Attitude against red eyes
- Busser on / off
- Counting the flashes
- Protection against use of too many volts
- Indication Vol
- Indication of temperature in the housing flash light
- UV protection glass for flash tube
- Integrated handle
- Flash synchronization 1/250 (with trigger set)
- Flash synchronization 1/8000 (with synchronization cable)
The built-in Sony microprocessor provides a reliable and constant power output. On the back is a very comfortable and large touch screen (6x8cm), on which the setting values for the flashing can be read very quickly and easily. These values can be controlled with an optional trigger / remote control WT-3 or WT-3i up to a distance of 20 meters (very handy, if the flash lights are slightly higher or apart, you do not always have to go back and forth). With a manual control, 198 flash lights can be controlled. The built-in slave provides an automatic co-flashing, this flash light can be adjusted on with-flashes on the 1st, 2nd or 3rd flash of your camera light! Through the powerful "twist-click" bayonet connector on the front of the flashlight, the greatest available accessories match this flash. Suitable for the amateur and professional photographer and suitable for the school photographer, product and portrait photographer. Stylish and sturdy metalized rubberized housing.
Optionally, you can control the GM flashlights with a trigger / remote control!
With a trigger / remote control, you can set up and trigger up to 198 studioblights.
The USB interface on the studio flash is only suitable for BRESSER WT-3 triggers and receivers. Please do not charge or connect any other technical devices to the studio flash!
SCOPE OF DELIVERY
- Studioblitz light FM-1200
- Protective cap (for transport)
- Synchro flash cable
- 150W LED Adjusting Lamp
- flash tube
- Tilt head with tripod connection
- power cable
- (Without metal reflector)
Product series: | MX series |
---|
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- Risk of overheating! Ensure adequate air circulation.
- Avoid moisture! Do not use the device in damp or wet environments.
- Risk of burns! Lamps can become hot allow them to cool fully before replacing.
- Electrical safety! Use only the recommended power source and regularly check cables for damage.
- Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
- Fire hazard! Keep flammable materials away from lighting.
- Eye protection! Do not look directly into the lamp to avoid eye damage.
- Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
- Store dust-free! Keep in a dry and clean place.
- Follow intended use! Use the device only for its designated purpose and according to the instructions.
- Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
- Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
- Safe transport! Pack the product carefully to minimise damage during transit.
- Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.